How do you find an optimum learning rule for a given problem, say a multiple category classification?
I was thinking of using Genetic Algorithms, but I know there are issues surrounding performance. I am looking for real world examples where you have not used the textbook learning rules, and how you found those learning rules.
Nice question BTW.
classification algorithms can be classified using many Characteristics like:
What does the algorithm strongly prefer (or what type of data that is most suitable for this algorithm).
training overhead. (does it take a lot of time to be trained)
When is it effective. ( large data - medium data - small amount of data ).
the complexity of analyses it can deliver.
Therefore, for your problem classifying multiple categories I will use Online Logistic Regression (FROM SGD) because it's perfect with small to medium data size (less than tens of millions of training examples) and it's really fast.
Another Example:
let's say that you have to classify a large amount of text data. then Naive Bayes is your baby. because it strongly prefers text analysis. even that SVM and SGD are faster, and as I experienced easier to train. but these rules "SVM and SGD" can be applied when the data size is considered as medium or small and not large.
In general any data mining person will ask him self the four afomentioned points when he wants to start any ML or Simple mining project.
After that you have to measure its AUC, or any relevant, to see what have you done. because you might use more than just one classifier in one project. or sometimes when you think that you have found your perfect classifier, the results appear to be not good using some measurement techniques. so you'll start to check your questions again to find where you went wrong.
Hope that I helped.
When you input a vector x to the net, the net will give an output depend on all the weights (vector w). There would be an error between the output and the true answer. The average error (e) is a function of the w, let's say e = F(w). Suppose you have one-layer-two-dimension network, then the image of F may look like this:
When we talk about training, we are actually talking about finding the w which makes the minimal e. In another word, we are searching the minimum of a function. To train is to search.
So, you question is how to choose the method to search. My suggestion would be: It depends on how the surface of F(w) looks like. The wavier it is, the more randomized method should be used, because the simple method based on gradient descending would have bigger chance to guide you trapped by a local minimum - so you lose the chance to find the global minimum. On the another side, if the suface of F(w) looks like a big pit, then forget the genetic algorithm. A simple back propagation or anything based on gradient descending would be very good in this case.
You may ask that how can I know how the surface look like? That's a skill of experience. Or you might want to randomly sample some w, and calculate F(w) to get an intuitive view of the surface.
Related
I'm looking for a supervised machine learning algorithm that would produce transparent rules or definitions that can be easily interpreted by a human.
Most algorithms that I work with (SVMs, random forests, PLS-DA) are not very transparent. That is, you can hardly summarize the models in a table in a publication aimed at a non-computer scientist audience. What authors usually do is, for example, publish a list of variables that are important based on some criterion (for example, Gini index or mean decrease of accuracy in the case of RF), and sometimes improve this list by indicating how these variables differ between the classes in question.
What I am looking is a relatively simple output of the style "if (any of the variables V1-V10 > median or any of the variables V11-V20 < 1st quartile) and variable V21-V30 > 3rd quartile, then class A".
Is there any such thing around?
Just to constraint my question a bit: I am working with highly multidimensional data sets (tens of thousands to hundreds of thousands of often colinear variables). So for example regression trees would not be a good idea (I think).
You sound like you are describing decision trees. Why would regression trees not be a good choice? Maybe not optimal, but they work, and those are the most directly interpretable models. Anything that works on continuous values works on ordinal values.
There's a tension between wanting an accurate classifier, and wanting a simple and explainable model. You could build a random decision forest model, and constrain it in several ways to make it more interpretable:
Small max depth
High minimum information gain
Prune the tree
Only train on "understandable" features
Quantize/round decision threhsolds
The model won't be as good, necessarily.
You can find interesting research in the understanding AI methods done by Been Kim at Google Brain.
I am working on edge detection in images and would like to evaluate the performance of algorithm, if any any one could give me a reference or method on how to proceed it will be really helpful. :)
I do not have ground truth and data set includes color as well as gray images.
Thank you.
Create a synthetic data set with known edges, for example by 3D rendering, by compositing 2D images with precise masks (as may be obtained in royalty free photosets), or by introducing edges directly (thin/faint lines). Remember to add some confounding non-edges that look like edges, of a type appropriate for what you're tuning for.
Use your (non-synthetic) data set. Run the reference algorithms that you want to compare against. Also produce combinations of the reference algorithms, for example by voting (majority, at least K out of N, etc). Calculate stats on your algo vs reference algo performance, in terms of (a) number of points your algo classifies as edge which each reference algo, or the combination, does not classify as edge (false positive), or (b) number of points which the reference algo classifies as edge that your algo does not (false negative). You can also calculate a rank correlation-type number for algos by looking at each point and looking at which algos do (or don't) classify that as an edge.
Create ground truth manually. Use reference edge-finding algos as a starting point, then fix up by hand. Probably valuable to do for a small number of images in any case.
Good luck!
For comparisons, quantitative measures like what #Alex I explained is best. To do so, you need to define what is "correct" with a ground truth set and a way to consistently determine if a given image is correct or on a more granular level, how correct (some number like a percentage) it is. #Alex I gave a way to do that.
Another option that is often used in graphics research where there is no ground truth is user studies. Usually less desirable as they are time consuming and often more costly. However, if it is a qualitative improvement that you are after or if a quantitative measurement is just too hard to do, a user study is an appropriate solution.
When I mean user study I mean to poll people on how well a result is given the input image. You could give them a scale to rate things on and randomly give them samples from both your results and the results of another algorithm
And of course, if you still want more ideas, be sure to check out edge detection papers to see how they measured their results (I'd actually look here first as they've already gone through this same process and determined what was best for them: google scholar).
Background
Here is the problem:
A black box outputs a new number each day.
Those numbers have been recorded for a period of time.
Detect when a new number from the black box falls outside the pattern of numbers established over the time period.
The numbers are integers, and the time period is a year.
Question
What algorithm will identify a pattern in the numbers?
The pattern might be simple, like always ascending or always descending, or the numbers might fall within a narrow range, and so forth.
Ideas
I have some ideas, but am uncertain as to the best approach, or what solutions already exist:
Machine learning algorithms?
Neural network?
Classify normal and abnormal numbers?
Statistical analysis?
Cluster your data.
If you don't know how many modes your data will have, use something like a Gaussian Mixture Model (GMM) along with a scoring function (e.g., Bayesian Information Criterion (BIC)) so you can automatically detect the likely number of clusters in your data. I recommend this instead of k-means if you have no idea what value k is likely to be. Once you've constructed a GMM for you data for the past year, given a new datapoint x, you can calculate the probability that it was generated by any one of the clusters (modeled by a Gaussian in the GMM). If your new data point has low probability of being generated by any one of your clusters, it is very likely a true outlier.
If this sounds a little too involved, you will be happy to know that the entire GMM + BIC procedure for automatic cluster identification has been implemented for you in the excellent MCLUST package for R. I have used it several times to great success for such problems.
Not only will it allow you to identify outliers, you will have the ability to put a p-value on a point being an outlier if you need this capability (or want it) at some point.
You could try line fitting prediction using linear regression and see how it goes, it would be fairly easy to implement in your language of choice.
After you fitted a line to your data, you could calculate the mean standard deviation along the line.
If the novel point is on the trend line +- the standard deviation, it should not be regarded as an abnormality.
PCA is an other technique that comes to mind, when dealing with this type of data.
You could also look in to unsuperviced learning. This is a machine learning technique that can be used to detect differences in larger data sets.
Sounds like a fun problem! Good luck
There is little magic in all the techniques you mention. I believe you should first try to narrow the typical abnormalities you may encounter, it helps keeping things simple.
Then, you may want to compute derived quantities relevant to those features. For instance: "I want to detect numbers changing abruptly direction" => compute u_{n+1} - u_n, and expect it to have constant sign, or fall in some range. You may want to keep this flexible, and allow your code design to be extensible (Strategy pattern may be worth looking at if you do OOP)
Then, when you have some derived quantities of interest, you do statistical analysis on them. For instance, for a derived quantity A, you assume it should have some distribution P(a, b) (uniform([a, b]), or Beta(a, b), possibly more complex), you put a priori laws on a, b and you ajust them based on successive information. Then, the posterior likelihood of the info provided by the last point added should give you some insight about it being normal or not. Relative entropy between posterior and prior law at each step is a good thing to monitor too. Consult a book on Bayesian methods for more info.
I see little point in complex traditional machine learning stuff (perceptron layers or SVM to cite only them) if you want to detect outliers. These methods work great when classifying data which is known to be reasonably clean.
Is Latent Semantic Indexing (LSI) a Statistical Classification algorithm? Why or why not?
Basically, I'm trying to figure out why the Wikipedia page for Statistical Classification does not mention LSI. I'm just getting into this stuff and I'm trying to see how all the different approaches for classifying something relate to one another.
No, they're not quite the same. Statistical classification is intended to separate items into categories as cleanly as possible -- to make a clean decision about whether item X is more like the items in group A or group B, for example.
LSI is intended to show the degree to which items are similar or different and, primarily, find items that show a degree of similarity to an specified item. While this is similar, it's not quite the same.
LSI/LSA is eventually a technique for dimensionality reduction, and usually is coupled with a nearest neighbor algorithm to make it a into classification system. Hence in itself, its only a way of "indexing" the data in lower dimension using SVD.
Have you read about LSI on Wikipedia ? It says it uses matrix factorization (SVD), which in turn is sometimes used in classification.
The primary distinction in machine learning is between "supervised" and "unsupervised" modeling.
Usually the words "statistical classification" refer to supervised models, but not always.
With supervised methods the training set contains a "ground-truth" label that you build a model to predict. When you evaluate the model, the goal is to predict the best guess at (or probability distribution of) the true label, which you will not have at time of evaluation. Often there's a performance metric and it's quite clear what the right vs wrong answer is.
Unsupervised classification methods attempt to cluster a large number of data points which may appear to vary in complicated ways into a smaller number of "similar" categories. Data in each category ought to be similar in some kind of 'interesting' or 'deep' way. Since there is no "ground truth" you can't evaluate 'right or wrong', but 'more' vs 'less' interesting or useful.
Similarly evaluation time you can place new examples into potentially one of the clusters (crisp classification) or give some kind of weighting quantifying how similar or different looks like the "archetype" of the cluster.
So in some ways supervised and unsupervised models can yield something which is a "prediction", prediction of class/cluster label, but they are intrinsically different.
Often the goal of an unsupervised model is to provide more intelligent and powerfully compact inputs for a subsequent supervised model.
The question sort of says it all.
Whether it's for code testing purposes, or you're modeling a real-world process, or you're trying to impress a loved one, what are some algorithms that folks use to generate interesting time series data? Are there any good resources out there with a consolidated list? No constraints on values (except plus or minus infinity) or dimensions, but I'm looking for examples that people have found useful or exciting in practice.
Bonus points for parsimonious and readable code samples.
There are a ton of PRN generators out there, and you can always get free random bits, or even buy them on CD or DVD.
I've used simple sine wave generators mixed together with some phase and amplitude noise thrown in to get signals that sound and look interesting to humans when put through speakers or lights, but I don't know what you mean by interesting.
There are ways to generate data that looks interesting in a chart form, but that would be different than data used on a stock chart, and neither would make a nice "static" image such as produced by an analog television tuned to a null channel.
You can use Conway's game of life as a PRN, and "listen" to cells (or run all the cells through a logic circuit) to get some interesting time based signals.
It would be interesting to look at the graph of DB updates/inserts for Stackoverflow over time, and you could mine that data.
There really are infinite ways to generate an "interesting" time series data. Can you narrow the scope of your question?
Don't have an answer for the algorithm part but you can see how "realistic" your data is with Benford's law
Try the kind of recurrences that can give variously simple or chaotic series based on the part of their phase spaces you explore: the simplest I can think of is the logistic map x(n+1) = r * x(n) * ( 1 - x(n) ). With r approx. 3.57 you get chaotic results that depend on the initial point.
If you graph this versus time you can get lots of different series just by manipulating that parameter r. If you were to graph it as x(n+1) v. x(n) without connecting dots, you see a simple parabola take shape over time.
This is one of the most basic functions from chaos theory and trying more interesting polynomials, graphing them as x(n+1) v. x(n) and watching a shape form, and then graphing x(n) v. n is a fun and interesting way to create series.
Graphing x(n+1) v. x(n) makes it quickly obvious if you're only visiting a small number of points. Deeper recurrences become more interesting as well, and using different values of x(0) to check on sensitivity to initial conditions is also of interest.
But for simplicity, control by a single parameter, and ability to find something to read about your recurrence, it'll be hard to beat the logistic map.
I recommend: http://en.wikipedia.org/wiki/Logistic_map. It has a nice description of what to expect from different values of r.