I have to use bash scripting to copy files from one folder to another. If the destination folder has a file with the same name but older timestamp, it should not copy. Only newer files should be copied. I could have used cp -u, but I was asked not to use it. Essentially I have to use the test command testing for "ot". Please let me know how could this be done. I believe two for loops one to read the files in the source and one for the destination directories can be used and the the time stamp compared. The problem is that both for loops produce the absolute path names along with the file name. So not sure how to compare them
Thanks
You can profit from the parameter substitution:
for file in "$folder1"/* ; do
filename=${file##*/} # Remove everything to the last slash.
Or, you can change the directory:
cd "$folder1"
for file in * ; do
## you have to use full or relative path to $folder2 here
Related
I would like to copy a series of similar files from the current directory to the target directory, the files under the current directory are:
prod07_sim0500-W31-0.2_velocity-models-2D_t80_f0001_ux.hst
prod07_sim0500-W31-0.2_velocity-models-2D_t80_f0001_uz.hst
prod07_sim0500-W31-0.2_velocity-models-2D_t80_f0002_ux.hst
prod07_sim0500-W31-0.2_velocity-models-2D_t80_f0002_uz.hst
prod07_sim0500-W31-0.2_velocity-models-2D_t80_f0003_ux.hst
prod07_sim0500-W31-0.2_velocity-models-2D_t80_f0003_uz.hst
Where sim is from sim0001 to sim0500 and f is from f0001 to f0009. I only need f0002, f0005 and f0008. I write the following code:
target_dir="projects/data"
for i in {0001..0500}; do
for s in f000{2,5,8}; do
files="[*]$i[*]$s[*]"
cp $files target_dir
done
done
I am very new to Shell, and wondering how to write the $files="[*]$i[*]$s[*]"$, so that it could match only the f0002, f0005 and f0008. The reason why I also use for i in {0001..0500}; do is that the files are too large and I would like to make sure I could access some completed ones (for example, including all sim0001) in the beginning.
Edit: changed for s in f0002 f0005 f0008; do to f000{2,5,8}.
What you need is globbing and a bit different quoting:
cp *"$i"*"$s"* "$target_dir"
Not storing this in a variable is intentional - it's faster and it's safe. If you end up with such a large list of files that you start running into system limits you'll have to look into xargs.
Oracle's sqlldr defaults to a .dat extension. That I want to override. I don't like to rename the file. When googled get to know few answers to use . like data='fileName.' which is not working. Share your ideas, please.
Error message is fileName.dat is not found.
Sqlloder has default extension for all input files data,log,control...
data= .dat
log= .log
control = .ctl
bad =.bad
PARFILE = .par
But you have to pass filename without apostrophe and dot
sqlloder pass/user#db control=control data=data
sqloader will add extension. control.ctl data.dat
Nevertheless i do not understand why you do not want to specify extension?
You can't, at least in Unix/Linux environments. In Windows you can use the trailing period trick, specifying either INFILE 'filename.' in the control file or DATA=filename. on the command line. WIndows file name handling allows that; you can for instance do DIR filename. at a command prompt and it will list the file with no extension (as will DIR filename). But you can't do that with *nix, from a shell prompt or anywhere else.
You said you don't want to copy or rename the file. Temporarily renaming it might be the simplest solution, but as you may have a reason not to do that even briefly you could instead create a hard or soft link to the file which does have an extension, and use that link as the target instead. You could wrap that in a shell script that takes the file name argument:
# set variable from correct positional parameter; if you pass in the control
# file name or other options, this might not be $1 so adjust as needed
# if the tmeproary file won't be int he same directory, need to be full path
filename=$1
# optionally check file exists, is readable, etc. but overkill for demo
# can also check temporary file does not already exist - stop or remove
# create soft link somewhere it won't impact any other processes
ln -s ${filename} /tmp/${filename##*/}.dat
# run SQL*Loader with soft link as target
sqlldr user/password#db control=file.ctl data=/tmp/${filename##*/}.dat
# clean up
rm -f /tmp/${filename##*/}.dat
You can then call that as:
./scriptfile.sh /path/to/filename
If you can create the link in the same directory then you only need to pass the file, but if it's somewhere else - which may be necessary depending on why renaming isn't an option, and desirable either way - then you need to pass the full path of the data file so the link works. (If the temporary file will be int he same filesystem you could use a hard link, and you wouldn't have to pass the full path then either, but it's still cleaner to do so).
As you haven't shown your current command line options you may have to adjust that to take into account anything else you currently specify there rather than in the control file, particularly which positional argument is actually the data file path.
I have the same issue. I get a monthly download of reference data used in medical application and the 485 downloaded files don't have file extensions (#2gb). Unless I can load without file extensions I have to copy the files with .dat and load from there.
I have a script that takes as an argument a path to a file upon which it performs certain operations. These files are stored in directories with path storage///_id/files (so in 2016 July 22 it would be storage/2016/Jul/22_1/files for the first set of files, .../Jul/22_2/files for second one etc.). The problem is each directory stores files with two extensions (say file.doc, file.txt) and I want to perform operations only on .txt files. I've tested earlier something like
for file in "/home/gonczor/temp/"*/*".txt"; do
echo "$file"
done
And it worked perfectly given that names in directories don't change. When I move one step further and add this 22_1, 22_2, 23_1 directories something strange happens.
This is my script (simplified):
for file in "$FILE_PATH/""$YEAR/""$MONTH/""$DAY"*/*".txt"; do
my_program ${report}
done
And instead of finding .../2016/Jul/22_1/file.txt it finds /2016/Jul/22*/*.txt
How can I make it work? The solution I've tried to make up is from here
I have a folder of data folders with the following structure:
sampleName1-randomNumbers/subfolder1/subfolder2/subfolder3/data1.gz
sampleName1-randomNumbers/subfolder1/subfolder2/subfolder3/data2.gz
sampleName2-randomNumbers/subfolder1/subfolder2/subfolder3/data1.gz
I want to modify all the data.gz within each sample folder by appending the sample name but not the random numbers to get:
sampleName1-randomNumbers/subfolder1/subfolder2/subfolder3/sampleName1_data1.gz
sampleName1-randomNumbers/subfolder1/subfolder2/subfolder3/sampleName1_data2.gz
sampleName2-randomNumbers/subfolder1/subfolder2/subfolder3/sampleName2_data1.gz
It seems like this should be a simple mv for loop but I haven't been able to figure out how to pull part of a folder name using basename.
for i in */Data/Intensities/BaseCalls/*.gz; do mv $i "fastq""/"${i%%-*}"."`basename $i`; done
I couldn't figure out how to make the files stay in their original folder but for my purposes it works to have all the files go to a new folder ("fastq")
I suppose the "sampleName" part doesn't include dashes. In that case, use the standard pattern removal expansion: %%. That is, suppose your full path (relative to directory root) is stored in $path, just do ${path%%-*} to extract the "sampleName" part. Search for %% in the Bash Reference Manual for more details. As a simple example:
> path=sampleName1-randomNumbers/subfolder1/subfolder2/subfolder3/data1.gz
> echo ${path%%-*}
sampleName1
Otherwise, you could also use more advanced substring extraction based on regex. See BashFAQ/100 or Manipulating Strings from the TLDP Advanced Bash Scripting Guide.
Update. Here's the full command to perform the job described, and it is entirely native to the shell:
for file in */Data/Intensities/BaseCalls/*.gz; do
mv "$file" "${file%/*}/${file%%-*}_${file##*/}"
done
I have a bunch of files I'm trying to organize quickly, and I had two questions about how to do that. I really appreciate any help! I tried searching but couldn't find anything on these specific commands for OSX.
First, I have about 100 folders in a directory - I'd like to place an folder in each one of those folders.
For example, I have
Cars/Mercedes/<br>
Cars/BMW/<br>
Cars/Audi/<br>
Cars/Jeep/<br>
Cars/Tesla/
Is there a way I can create a folder inside each of those named "Pricing" in one command, i.e. ->
Cars/Mercedes/Pricing <br>
Cars/BMW/Pricing<br>
Cars/Audi/Pricing<br>
Cars/Jeep/Pricing<br>
Cars/Tesla/Pricing
My second question is a little tougher to explain. In each of these folders, I'd like move certain files into these newly created folders (above) in the subdirectory.
Each file has a slightly different filename but contains the same string of letters - for example, in each of the above folders, I might have
Cars/Mercedes/payment123.html
Cars/BMW/payment432.html
Cars/Audi/payment999.html
Cars/Jeep/payment283.html
Is there a way to search each subdirectory for a file containing the string "payment" and move that file into a subfolder in that subdirecotry - i.e. into the hypothetical "Pricing" folders we just created above with one command for all the subdirectories in Cars?
Thanks so much~! help with either of these would be invaluable.
I will assume you are using bash, since it is the default shell in OS X. One way to do this uses a for loop over each directory to create the subdirectory and move the file. Wildcards are used to find all of the directories and the file.
for DIR in Cars/*/ ; do
mkdir "${DIR}Pricing"
mv "${DIR}payment*.html" "${DIR}Pricing/"
done
The first line finds every directory in Cars, and then runs the loop once for each, replacing ${DIR} with the current directory. The second line creates the subdirectory using the substitution. Note the double quotes, which are necessary only if the path could contain spaces. The third line moves any file in the directory whose name starts with "payment" and ends with ".html" to the subdirectory. If you have multiple files which match this, they will all be moved. The fourth line simply marks the end of the loop.
If you are typing this directly into the command line, you can combine it into a single line:
for DIR in Cars/*/ ; do mkdir "${DIR}Pricing"; mv "${DIR}payment*.html" "${DIR}Pricing/"; done