While installing the Weblogic in windows 10 using jar file, I am getting the error message as Unable to access or modify the system registry. Select Run as Administrator when opening the Command Prompt and try again. though am executing as Administrator. From the log file I got the below error.
WARNING [1] com.oracle.cie.common.jni.WinRegistryHelper - Create Key Failed: HKEY_LOCAL_MACHINE\Software\Oracle
2017-10-06 11:19:54,972 SEVERE [1] com.oracle.cie.nextgen.launcher.PlatformHelper - createRegistry to add a value failed
2017-10-06 11:19:54,972 SEVERE [1] com.oracle.cie.nextgen.launcher.Launcher - Unable to access or modify the system registry. Select Run as Administrator when opening the Command Prompt and try again.
I understood that on making the System Registry entry HKEY_LOCAL_MACHINE\Software\Oracle, it is failing because the same entry already exists in my system as HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE. Though system registry is case-insensitive, weblogic is failing on making entries to this registry. Is there any solution to overcome this? The same issue has been already posted in different sites but not yet answered.Any help to solve this issue will be really appreciable.
I had the same problem, the next lines works to solve the problem.
Open cmd like administrator.
java -d64 -jar fmw_12.2.1.3.0_wls.jar If you don't have correctly configured the JAVA_HOME, you can replace the word "java", for the path where you have installed de JDK. Something like this:
C:\JRockit\jdk1.8.0_144\bin\java.exe
I installed PostgreSql on my Windows machine.
I can connect to PostgreSql through cmd.
But when I want to launch pgAdmin I am getting this error message.
Failed to connect to the pgAdmin application server. Click here to try again.
I have also Mysql installed on my machine if it can make any complications.
The same problem happened to me today:
And this is how I've solved it:
1) Use a text editor to open the config_distro.py file under the c:\Program Files\pgAdmin 4\v1\web folder. Change the value for SERVER_MODE from True to False, then save the change. (I have run Notepad++ as an Administrator, in order to be able to save in this protected folder.)
2) Go to folder c:\Users\your_name\AppData\Roaming\pgAdmin and make sure there is nothing there (delete all the files, as they are temporary and will be restored after starting pgAdmin)
3) Start pgAdmin
4) This time you will see a white box that sits - at least, on my slow laptop - about 20 seconds. (You may briefly see the original error message, but do not worry).
5) Meanwhile, the temporary files - required for running the application - are created.
6) Once the temporary files process is over, the application starts as expected.
Try starting the pgAdmin as administrator.
My config_distro.py was missing this line:
MINIFY_HTML=False
I added it as in the above steps and it works
In my case, SERVER_MODE was already False in config_distro.py. I then proceeded to start pgadmin4 as an administrator. This also did not work. Finally, I resolved this by restarting postgresql service in services.msc.
postgres service restart
In my case, the problem was non-ascii username.
Find pgAdmin installation and open/create config_local.py in editor, add this:
DATA_DIR = "C:/Data/pgAdmin" # set non-ascii path here
and run setup.py using python interpreter.
You can start the server manually - any errors will echo on the terminal. The windows app seems touchy on timing - this allows the server to take as much time as needed to start up.
Assuming you installed version 3 into "p:\pgAdmin 4" run the following commands"
p:
cd "\pgAdmin 4\v3\web"
set PYTHONPATH=P:\pgAdmin 4\v3\venv\Lib;P:\pgAdmin 4\v3\venv\DLLs
python pgAdmin4.py
When I run that I get the following output:
Starting pgAdmin 4. Please navigate to http://127.0.0.1:5050 in your browser.
I ran into this today even though the service was running in Windows 10. I just stopped the service, gave it a few seconds, and restarted it. I was able to connect with pgAdmin 4.
In my case the problem was solved by restarting the postgresql service.
Windows-> Service -> find for postgreSQL -> Stop and then Start
I have a fresh installation of Cassandra 3.7 with DatStax DDC in Windows. I am trying to start the Cassandra database as a service.I am using net start DataStax_DDC_Server to start the service. The service is not starting and exiting without reporting an error. I am getting the following error in the logs.
java.lang.RuntimeException: Failed to create failed snapshot tracking file [C:\Cassandra\.toDelete]. Aborting
at org.apache.cassandra.db.WindowsFailedSnapshotTracker.deleteOldSnapshots(WindowsFailedSnapshotTracker.java:99)
at org.apache.cassandra.service.CassandraDaemon.setup(CassandraDaemon.java:177)
at org.apache.cassandra.service.CassandraDaemon.activate(CassandraDaemon.java:585)
at org.apache.cassandra.service.CassandraDaemon.main(CassandraDaemon.java:714)
What is causing this error and how do I fix this?
Look at the logs in the installation folder. E.g. c:\Program Files\DataStax-DDC\logs.
The datastax_ddc_server-stderr.xxxxx.log will give you details about what the problem is. For me the error was cdc_raw_directory is missing and -Dcassandra.storagedir is not set so i opened c:\Program Files\DataStax-DDC\apache-cassandra\conf\cassandra.yaml, found the cdc_raw_directory setting and simply uncommented it.
After fixing that you also get an Error when you will try to run cassandra.bat from command line.
it will tell you that \conf\\\hotspot_compiler cannot be found
Fix:
go to C:\Program Files\DataStax-DDC\apache-cassandra\conf
modify cassandra-env.ps1
just change CASSANDRA_CONF\conf\hotsport_compiler
to CASSANDRA_HOMEconf\hotsport_compiler
WITHOUT the backslash... this is not a typo ^^
finally cassandra.bat will start and cqlshell will work.
.. then close the command window where you started cassandra.bat (as admin) press CONTROL+C
..and finally you can start the service as admin: net start DataStax_DDC_Server
Below is the process that i followed to get my cqlsh working on windows 10 (64 bit)
Msi Installation file used : datastax-ddc-64bit-3.9.0
After i have installed datastax:
1) Opened cqlsh, it started closing on me.
2) researched answers in stack overflow and found that i need to add raw directory.
3) Based on TugboatCaptain answer I enclosed cdc_raw_directory based on my installation folder in conf\cassandra.yaml file
4) Opened Errlog file and noticed there is mistake showing in the path "C:\Program Files\DataStax-DDC\data\cdc_raw" at "\DataStax-DDC" error while scanning double quoted scalar.
5) I removed "\" before "DataStax-DDC" from cdc_raw_directory value in conf\cassandra.yaml file and started Datastax DDC Server 3.9.0
6) Opened again the Err file and noticed the error is shifted to "\data"
7) I removed "\" from cdc_raw_directory in conf\cassandra.yaml file and saved the file and started Datastax DDC Server 3.9.0
8) Opened again the Err file and noticed the error is shifted to "\data"
9) repeated the process of removing "\" and saved the file until i was able to start the service.
10) Finally my service started, Hope this helps and also attached screenshots from my pc.
Finally my cdc_raw_directory value looked like below:
Final Image from "conf\cassandra.yaml" once my service has started
This is the my cqsl shell screenshot
Mylog file(logs\datastax_ddc_server-stderr.2019-03-24.log) screenshot
I had the same problem (I'd start and it automatically says service stopped). I got it fixed as follows:
go to C:\Program Files\DataStax-DDC\apache-cassandra\conf
edit cassandra.yaml
change
cdc_raw_directory: /var/lib/cassandra/cdc_raw
to:
cdc_raw_directory: "C:/Program Files/DataStax-DDC/data/cdc_raw"
Make sure that there are no spaces before "cdc_raw_directory" i.e. not " cdc_raw_directory" because Python is space sensitive
Try running the CMD prompt as administrator, that fixed the problem for me.
While trying to start Apache using XAMPP, I was receiving - "Attempting to start Apache service..." message in XAMPP UI. No further details were available.
Where can I see the logs (I was running XAMPP as Admin) ?
IF PORT 80 IS NOT THE ISSUE!
Check to see if the port 80 is in use first as this can be an issue.
You can do this by typing "netstat -an" into cmd. The look for 0.0.0.0:80 under Local Address, if you find this is in use then follow the solution from #Karthik. However, I had a similar issue but my port 80 was not in use.
My XAMPP had wrong paths locations, steps to fix this:
1.Find out the Apache version you are using, you can find this by looking in Services (Control panel, Admin Tools, Services) and finding Apache in my case it was listed as Apache2.4
2.Close XAMPP.
3.Run cmd as admin.
4.execute 'sc delete "Apache2.4"' (put your version in place of mine and without the surrounding ' ', but with the " " around Apache).
5.execute 'sc delete "mySQL"', again remove the '' when you type it.
6.reopen XAMPP and try starting Apache
If you are having trouble with FileZill, Mercury, or Tomcat you could try it here too, but I have not tested that myself.
Hope this helps!
I realized it was a port issue since I was running IIS and other web servers in my machine. But I was more interested to see a detailed error message with the port number in the UI.
Seems like it was not logged in the UI or log file (at least in my case), but in the Event viewer (Control panel -> View Event Logs). Under the Even viewer -> Windows Logs -> Application
I could see a permission error something like the below one:
An attempt was made to access a socket in a way forbidden by its access permissions. : AH00072: make_sock: could not bind to address 0.0.0.0:443
To fix this permission issue for SSL port, Please change the below line in httpd-ssl.conf (C:\xampp\apache\conf\extra)
# When we also provide SSL we have to listen to the
standard HTTP port (see above) and to the HTTPS port
Listen xxx
Replace XXX with any valid port number that is open in your machine
If you are having issues with Port 80, then change the httpd.conf file (C:\xampp\apache\conf)
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 127.0.0.1:8000
I have also summarized other solutions that I came across:
Most often Skype blocks the Apache port. So terminate it and try again.
Find the process id (PID) that is using the Blocked port ( netstat -ano) and kill the corresponding process in Windows Task Manager.
For those who have accidentally (or not) changed one of the .conf files and apache does not run even after trying all the above solutions.
One easy way to track where the issue is located, is to run Apache via command prompt:
(On windows) : open command prompt as admin then navigate inside the bin folder of Apache , next run
httpd in order to run apache
C:\xampp\apache\bin\httpd
For my case it was :
someone had added a virtual host in the specific file that caused the problem . I commented the lines and Apache ran fine.
start xampp (as administrator),
(1) right click C:\xampp\xampp-control.exe, and run as administrator.
(2) unistall service module and then install service module.
(3) now try start the apache and mysql.
Check your DocumentRoot path (in httpd.conf); a typo there can cause this problem.
Had the same issue while updating to PHP7.2
Problem:
First I closed skype and then checked whether port 80 is not an issue. How you can check that? See #AlexT comment above.
In my case, port 80 wasn't an issue. So now I had to figure out what was wrong. So I checked Error Logs Control Panel > Even viewer > Windows Logs > Application and found following error against Apache2.4
httpd.exe: Syntax error on line 520 of C:/xampp/apache/conf/httpd.conf: Syntax error on line 18 of C:/xampp/apache/conf/extra/httpd-xampp.conf: Cannot load C:/xampp/php/php7ts.dll into server: The Apache service named is not a valid Win32 application.
Which means I had installed wrong PHP version. Actually I downloaded win64 version while the required version was Win32 for me.
So I downloaded correct version from: Download PHP 7.2.0 extracted it in C:/xampp/php folder, restarted the apache and it worked :)
I had the same issue, executing "setup_xampp.bat" in xampp folder solved my issue.
I had the same problem but it was because I had a previous version of xampp already installed and I tried to install a newer version. I had installed the newer version in another file directory (I had named the file directory xampp2). I solved the problem by uninstalling the newer version, renaming the old one (I renamed it xamppold) and I installed xampp again.
I guess if you haven't installed xampp in another file directory , it should be enough to reinstall xampp. If you are worried about your files , you always can make a backup before reinstalling xampp.
I solved the problem after watching the xampp activity log (the list of the bottom) and realizing xampp was trying to open the custom file path but I had another route path. If the first option didn't work, at least you can scroll up in the activity log and see what's error you get while starting as admin and trying to re install the Apache module or trying to start the module.
You may wander why I didn't just simply uninstall the whole thing from the beginning , and the answer would be because I had to tweak a couple of things in xampp for some different projects (from changing the ports , to add .dll to run mongo.db in Apache), and I was just too lazy to re-do everything again :b
I hope my answer can be helpful for anyone since this is my first time writing in stackoverflow :)
Cheers
In my case, with the same problem and Xampp window, I had copied \apache\conf\extra\httpd-vhosts.conf entries from an old Xampp version to a newly installed one so I could continue to open local projects in browsers. One of the vhosts paths was wrong. After deleting that entry Apache started without problem.
The reference by #Karthik to "in the Event viewer (Control panel -> View Event Logs" saved me time. It's all too easy to presume Xampp logs will point to the problem. It doesn't.
Also check if your xampp is installed in the main directory like C or D or E and not in or within a folder of that directory? i.e. ( "D:/Xampp" or is it "D:/something/Xampp") if its not in the main path of the directory, it will show this error.
copy your xampp directory from "D:\Something\Xampp" to "D:"
So it becomes like this "D:\Xampp"
and the issue will be resolved.
Starting Xampp as a console application (simply by doubleclicking xampp_start.exe in the Xampp root folder) was the only thing that worked for me on Windows 10 (no Skype, no Word Wide Web Publishing Service). WampServer and UwAmp also didn't work.
I had a hard-coded IP in httpd.conf and my local IP had changed which was causing my issue, changed IP over and all worked again
My scenario was different after I tested all the possible options. If you have changed the ports and still get the same problem, well here's something you can try out. This was done in Windows 7.
Step 1: Confirm the cause of the error by going to Control Panel -> System and Security -> Administrative Tools -> Event Viewer -> Windows Logs -> Application -> Error. Mine said "The Apache service named reported the following error:
httpd.exe: Syntax error on line 424 of C:/xampp/apache/conf/httpd.conf: Cannot load c:\xampp\php\php5apache.dll into server: The specified module could not be found." So I needed to change \php5apache.dll to the version of my php and apache version installed which was php7apache2_4.dll
Step 2: To get the correct name for your .dll php and apache file, got to C:\xampp\php. You will see something like php7apache2_4.dll with other files in the folder.
Step 3: Go to C:/xampp/apache/conf/httpd.conf and edit the configuration file and change "c:\xampp\php\php5apache.dll" to "c:\xampp\php\php7apache2_4.dll" in my case. Make sure you open the file as administrator save changes made.
Step 4: Run the xampp server and everything should work fine. Do not forget to shut down the xampp server before doing the changes to the apache configuration file.
Hope this helps. Cheers! :)
Try to install x86 version of XAMPP. The default XAMPP version on their website is x64 (maybe because I'm using x64 Windows 7).
download link here
I had this issue when I installed under Program Files, which they do not recommend due to write issues. This might only be a problem if you are not logged in as an admin and use a password to install. I just uninstalled and installed in a directory that did not need admin privileges.
Make sure Apache didn't get Disabled in Services (Control panel, Admin Tools, Services). If it's Disabled then Set it to Manual and it should run. That was my case, I found Apache Disabled.
Solution for my particular scenario (It had been working a couple days before getting borked):
Port 80 was not the problem, but something I had done while messing around with Services and Startup.
Type msconfig on Windows' Start menu
Click System Configuration
Screenshot for System Configuration
In the Services tab, search for Apache24 (Click "Hide all Microsoft services" in the checkbox at the bottom of the window to make it easier to find)
If its checkbox isn't checked, check it
If it was already checked, then this guide isn't going to help. However if it is:
Click OK, your PC will have to restart
Try once again! In my case Apache was already running once I opened Xampp
I had the same issue.Just click on services button.Then find apache and right cick > properties > set startup type as Automatic/ Manual. Now close apache and try again.It will work!
For me it wasn't a port or service issue; I had to re-run the XAMPP setup script. Although this didn't directly fix the issue for me, the script was much more verbose than the XAMPP log, pointing me in the right direction to actually solve the problem.
From the XAMPP GUI, click on Shell, type set, press Tab to autocomplete to the setup_xampp.bat file, and then press Enter to run it.
In my case I got the following output:
[ERROR]: Test php.exe failed !!!
[ERROR]: Perhaps the Microsoft C++ 2008 runtime package is not installed.
[ERROR]: Please try to install the MS VC++ 2008 Redistributable Package from the Mircrosoft page first
[ERROR]: http://www.microsoft.com/en-us/download/details.aspx?id=5582
This particular error is misleading. Although it specifies the Visual C++ 2008 Redistributable Package, PHP 7.4.x requires the Visual C++ 2019 Redistributable Package.
After installing that and following the prompt to restart, sure enough I'm now able to start Apache as normal.
make sure no space in front of the port number if you ever edited it.
From Xampp control panel, click on config (next to Apache), then choose Apache(httpd.config), search for listen 80 and change the port to another port.
If nothing works with you, I would suggest you download MAMP and use it instead.
It does the same thing, if not better.
Comment this lines from httpd.conf:
# Virtual hosts
#Include etc/extra/httpd-vhosts.conf
In the case you're using them it may solve.
when i run xampp control panel normal:
I had been run
I can’t start apache
So, I will run it with administrator:
I can run apache
I am follwing this tutorial: I am using 64-bit Windows 7 computer.
http://docs.mongodb.org/manual/tutorial/install-mongodb-on-windows/
I have installed MongoDB and starts the MongoDB file from the command prompt. Then I get the following error message:
Unable to create/open lock file: \data\db\mongod.lock
I don't know how to solve that problem.
Delete the mongod.lock file in the /data/db folder
Restart mongodb
I was experiencing a similar problem and i noted that some MongoDB processes were running in the background when i opened the task manager. so after i terminated the tasks and went to the mongod.lock file i was now able to delete it.