I have the below shell script to copy a txt file from a Unix machine to a Windows machine in the same network:
#!/bin/sh
HOST='localhost'
USER='redacted'
PASSWD='redacted'
FILE='/los_prod/scripts/log.txt'
ftp $HOST <<END_SCRIPT
user $USER
$PASSWD
put $FILE
quit
END_SCRIPT
exit 0
It's giving the error as:
:connection failed.
I am giving all the correct info in the script. What could be the reason?
You might want to have a look here:
http://www.stratigery.com/scripting.ftp.html
It gives a simple way to do what you want.
ftp doesn't accept input from stdin, so you can't just feed the login information in like that. You'd need to use a program like expect to automate the normal ftp command-line client. A better alternative may be to use another language instead of a Bourne shell script. Something like Perl (as mentioned by #sarathi), Ruby, or Python would allow you to write a fairly small script and use the FTP libraries available to them to more easily script it.
Here's a version of your script for expect:
set host "localhost"
set user "redacted"
set pass "redacted"
set file "/los_prod/scripts/log.txt"
spawn ftp $host
expect "Name"
send "$user\n"
expect "Password:"
send "$pass\n"
expect "ftp>"
send "put $file\n"
expect "ftp>"
send "quit\n"
You'll probably have to install expect on your system; it's not as widely available as other interpreters. Any modern Linux distro will have a package for it.
Related
I'm writing a script that will scp a tar file from my local server to a remote host. Since the script generates the file through a pre-requisite process, the name is generated dynamically. My script needs to take the name of the file and pass it to scp for transfer.
#!/usr/bin/expect -f
spawn scp test.$(date +%y%m%d_%H%M).tar user#IP-ADDRESS:/destination/folder
set pass "password"
expect "password: "
send -- "$pass\r"
expect eof
I've tried setting the filename as a variable but keep seeing the same error:
can't read "(date +%y%m%d_%H%M)": no such variable
while executing "spawn scp test.$(date +%y%m%d_%H%M).tar user#IP-ADDRESS:/destination/folder"
$(date +%y%m%d_%H%M) is not a Tcl command. If you use expect, you have to learn Tcl. To get a formatted date in Tcl, use the clock command. Also, interpolation of the result from a command in Tcl is not done by $(....), but by [....]. You can find examples for this construct here.
Decided to go another route since the team was able to provision a new Artifactory repo for this binary and alike. However, to the advice provided here I was able to make a few discoveries which I used to fix my issues:
I also had a password with $ symbol and that also caused a world of issues.
#!/bin/bash
TEST=$(date +%y%m%d_%H%M)
/usr/bin/expect <<eof
set password {pas\$word}
spawn scp "$TEST" user#IP-ADDRESS:/destination/folder
expect "*password:"
send "$pasword\r"
expect eof
so i've written a short expect script which logs into a APC Power Distribution Unit interface via telnet and polls the current ampage.
#!/usr/bin/expect
set ip "192.168.0.1"
set username "myusername"
set password "mypassword"
spawn "/bin/bash"
send "telnet $ip\r"
expect "*User Name*"
send "$username\r"
expect "*Password*"
send "$password\r"
expect "*APC*"
send -- "phReading all current\r"
expect "*Success*"
send "quit\r"
expect eof
The script does its job and I see the amps on screen, displayed like this:
apc>phReading all current
E000: Success
1: 7.5 A
apc>quit
What i need to do is 'export' that 7.5 figure, either to a text file or pass it to a bash script as a variable.
Any ideas on how i can do this?
Thank you!
Expect is an extension of TCL, so you have access to all of TCL's constructs.
If I were you I would have the expect script write directly to a file.
See the section "Writing a file" here: http://wiki.tcl.tk/367. It has a simple example for just that. In your case, you will want to open the file for append (a) instead of write (w).
open command documentation at: http://www.tcl.tk/man/tcl8.6/TclCmd/open.htm
Let me know how that works for you.
So, I've established a connection via ssh to a remote machine; and now what I would like to do is to execute few commands, grab some files and copy them back to my host machine.
I am aware that I can run
ssh user#host "command1; command2;....command_n"
and then close the connection, but how can I do the same without use the aforememtioned syntax? I have a lot of complex commands that has a bunch of quote and characters that would be a mess to escape.
Thanks!
My immediate thought is why not create a script and push it over to the remote machine to have it run locally in a text file? If you can't for whatever reason, I fiddled around with this and I think you could probably do well with a HEREDOC:
ssh -t jane#stackoverflow.com bash << 'EOF'
command 1 ...
command 2 ...
command 3 ...
EOF
and it seems to do the right thing. Play with your heredoc to keep your quotes safe, but it will get tricky. The only other thing I can offer (and I totally don't recomend this) is you could use a toy like perl to read and write to the ssh process like so:
open S, "| ssh -i ~/.ssh/host_dsa -t jane#stackoverflow.com bash";
print S "date\n"; # and so on
but this is a really crummy way to go about things. Note that you can do this in other languages.
Instead of the shell use some scripting language (Perl, Python, Ruby, etc.) and some module that takes care of the ugly work. For example:
#!/usr/bin/perl
use Net::OpenSSH;
my $ssh = Net::OpenSSH->new($host, user => $user);
$ssh->system('echo', 'Net::Open$$H', 'Quot%$', 'Th|s', '>For', 'You!');
$ssh->system({stdout_file => '/tmp/ls.out'}, 'ls');
$ssh->scp_put($local_path, $remote_path);
my $out = $ssh->capture("find /etc");
From here: Can I ssh somewhere, run some commands, and then leave myself a prompt?
The use of an expect script seems pretty straightforward... Copied from the above link for convenience, not mine, but I found it very useful.
#!/usr/bin/expect -f
spawn ssh $argv
send "export V=hello\n"
send "export W=world\n"
send "echo \$V \$W\n"
interact
I'm guessing a line like
send "scp -Cpvr someLocalFileOrDirectory you#10.10.10.10/home/you
would get you your files back...
and then:
send "exit"
would terminate the session - or you could end with interact and type in the exit yourself..
I want to write a simple bash script using ncat to open a connection to a ISP and its port.
The first command would be:
nc address port
Upon doing this, I am prompted first to provide a username. I must hit ENTER, and then I will be prompted to provide a password and then I must hit ENTER again.
After this, I want to open a Terminal process window. Can anyone point me to sufficient resources for this type of scripting?
I know the username and password already, but I'm not too sure how to work around the fact that I must provide it and then hit enter. I'm also unsure how to open a new Terminal proceses.
Thanks in advance!
Check out expect script
Expect
Example:
# Assume $remote_server, $my_user_id, $my_password, and $my_command were read in earlier
# in the script.
# Open a telnet session to a remote server, and wait for a username prompt.
spawn telnet $remote_server
expect "username:"
# Send the username, and then wait for a password prompt.
send "$my_user_id\r"
expect "password:"
# Send the password, and then wait for a shell prompt.
send "$my_password\r"
expect "%"
# Send the prebuilt command, and then wait for another shell prompt.
send "$my_command\r"
expect "%"
# Capture the results of the command into a variable. This can be displayed, or written to disk.
set results $expect_out(buffer)
# Exit the telnet session, and wait for a special end-of-file character.
send "exit\r"
expect eof
The secret lies in the HEREDOC
You can solve this problem with something akin to:
$ command-that-needs-input <<EOF
authenticate here
issue a command
issue another command
EOF
Look at the link I provided for here documents - it includes support for variable substitution and lots of other useful things. Enjoy!
I'm trying to automate a startup of a specific service with bash
When the service is started with init.d (/etc/init.d/openvpn.custom) it is promting for username and then password - and then it connects
The auth-user-pass from-file is not possible with the installed version, and it cannot be upgraded because of dependencies
So i'm trying to write a simple bash scripts that executes the init.d script, sleeps for a bit, inputs the username, returns, sleeping a bit, inputting the password - you'll get the flow.
like http://pastebin.com/qWHX7Di5
I've experimented with echo, but it doesent seem to work
This is for a rather legacy firewall i'm asked to keep connected.
Is this even possible?
I would use expect instead of bash. You can still call it from within bash if you need to do other tasks as well.
In expect, the script would be something like the following (untested):
#!/usr/bin/expect -f
set username "username"
set password "password"
spawn /etc/init.d/openvpn.custom start
expect "Username:"
send "$username\r"
expect "Password:"
send "$password\r"
expect eof
You'd want to change the expect "Username:" & expect "Password:" lines to match the actual login prompts that are output by your init.d script.
See the expect man page for further details.
You can try using a here-doc:
/path/to/init.d << END
$username
$password
END