I'm trying to install cygwin on a windows 2008 server. I managed to get a hold of the cygwin setup.exe version 2.721.
Since cygwin.com is down at the moment, i tried several mirrors found through the google cache of the cygwin mirrors. I ran into the same problem like this guy: Help needed installing cygwin: may be ini file problem
Like they suggested, I tried http://mirrors.kernel.org as mirror. It downloads some setup.bz files fine. Then I get the error "Unable to get setup.ini from http://mirrors.kernel.org/". Any suggestions how to install cygwin now?
I got this error when I tried to use http://cygwin.com/setup.exe and not http://cygwin.com/setup-x86.exe or http://cygwin.com/setup-x86_64.exe. It seems the mirrors have just recently removed support for setup.exe. The setup.exe is still available to download but none of the mirrors work.
The solution is to use either the setup-x86.exe or the setup-x86_64.exe.
The mirror should be the full path http://mirrors.kernel.org/sourceware/cygwin
If you get complaints about the .ini being from a newer version of setup, you'll need to find a newer setup.exe somewhere on the net that you trust. (And cygwin guys? Grrr for not including setup.exe in your mirrors and for not signing your exe!)
the reason is so simple:
the setup.ini changed its's location!
just go to cygwin site, download the latest setup.exe file. it will be OK.
While installing, select Install through http/ftp proxy. Firewall may block the installation. Hence, proxy will help. Also try running as Administrator.
It helps..
Regards,
Frank..!!
For those who are still getting this error even with the correct installer, make sure that you're running the setup file on your local hard drive.
My problem was that I was trying to launch the executable from a mapped network drive. Copying down and running the program locally fixed the issue.
Can you use another mirror? Try lug.mtu.edu or something like that. I've always had nothing but good results from there.
Was giving me the same Unable to get setup from ... error.
I used the new setup-x86_64.exe from the Cygwin.org site & had to select the option Use Internet Explorer Proxy Settings.
It fetched the mirror urls.
It worked that way for me.
But, if it does not fetch all the mirrors by itself, we can
add the url http://mirrors.kernel.org in the Download list.
Initially, when it was not downloading the mirrors list by itself, I had tried adding the above http://mirrors.kernel.org url manually & it had worked that way too.
Was facing the Same issue... Run the installer in administrator mode and set the FTP/HTTP proxy to the proxy setting configured in internet explorer. Later if the download doesn't occur try different proxies. Selecting this mirror http://mirrors.kernel.org worked for me.
Related
I am trying to install mingw-w64 onto Windows. However I receive an error, "the file has been downloaded incorrectly". Redownloading the setup file again from sourceforge does not fix the problem. Is there an alternative way to install it or am I doing something wrong?
Old post but same problem, the installer doesn't seem to work.
I give the solution which works for me
You can directly download the archive of MinGW64 with your chosen configuration :
https://sourceforge.net/projects/mingw-w64/files/mingw-w64/
Once the compressed file downloaded, you have just to extract and copy/paste the MinGW64 folder( with the pre-compiled librairies) to your chosen folder ( in my case : C:\mingw64)
I got same error and solved it, after struggling a few hours. You should download MinGW64 via https://winlibs.com/#download-release.
After downloading, You should unzip mingw64 file to a folder(in my case I unzipped it to c disk; C:\mingw64)
And then you have to set up path. for that follow below steps;
open settings.
Search for Edit environment variables for your
account.
choose path variable and then select edit.
Select New and add the Mingw-w64 folder path(bin folder). In my case, I added (C:\mingw64\bin).
Select OK to save the updated path.
And reopen your cmd, then check if everything is good by typing; gcc --version
Long story short, the official installer is broken and not been fixed for years, so we have to install it manually.
The official download link above would bring you to sourceforge: https://sourceforge.net/projects/mingw-w64/files/Toolchains targetting Win32/Personal Builds/mingw-builds/installer/mingw-w64-install.exe
And in the same folder that contains the installer, there's a repository.txt. (about this file)
Take a look at it, the installer basically just download and unzip the build from one of these urls within repository.txt. Choose the url you want and download/upzip it manually. (In my case, I use 8.1.0|x86_64|posix|seh|rev0 setup)
Last, setup the Path environment variable pointing to your unzipped bin folder, let say C:\mingw64\bin, and this should do the trick.
Finally, I solved this problem by downloading this:http://winlibs.com/
GCC 10.1.0 + LLVM/Clang/LLD/LLDB 10.0.0 + MinGW-w64 7.0.0 - release 3 (LATEST)
Win32: 7-Zip archive* | Zip archive
Win64: 7-Zip archive* | Zip archive
and set the %path%
After that, I still can't execute gcc correctly, but then I solved the problem by adding this environment variable:
"CGO_ENABLED=1"
I encountered the problem when using this golang package: https://github.com/mattn/go-sqlite3
I received the same error. When I re-ran the installer as an adminstrator it was installed successfully.
I also made sure not to add any spaces to the installation path.
Following this tutorial helped me manually install MinGW for windows : youtube
So the problem for me was that when I tried to use the .exe installer, it either showed me that,
"the file has been downloaded incorrectly" , or , the /.../bin folder did not have any files in it.
In the link above, the MinGW files (including the /bin files) were manually downloaded and identified properly by the Environment Variables.
The problem is with your internet connection and/or ISP. I'm not great at networking so I'll let others be more specific. I tried installing/downloading it using my mobile's data as wifi hotspot and it worked. Hope it helps
I am taking a course on Udacity that requires me to set up a virtual machine on my system. I have already downloaded and installed Virtual Box and Vagrant. When I try to run the command vagrant up, I get this error:
Could anyone please explain what might be going wrong?
I am working on my office laptop so I cannot change the firewall settings. They are controlled by McAfee. Also, the firewall has been turned off by McAfee to the best of my knowledge. I tried searching a lot but couldn't come up with a solution to this.
Well, I researched more about this and was finally able to find something. This issue comes up when vagrant doesn't have folder permission. Sometimes Cygwin shell in Windows doesn't get permission to write or create a new folder.
I followed their github issue. This is what made it work for me:
Rename C:\HashiCorp\Vagrant\embedded\gnuwin32\bin\bsdtar.exe to
something like bsdtar_backup.exe (or temporarily move it)
In that same directory, create bsdtar.bat with this content:
#ECHO OFF
"%~dp0....\mingw\bin\bsdtar.exe" %*
This will result in Vagrant using the mingw binary, without you having to dive into some code. After these two steps, try adding a box.
I installed the JDK8u40, but only find the javafx-src.zip.
Where can I find the source code for JDK? The src.zip?
Below is what I get after installation:
And btw, I didn't see the installation wizard! This is quite strange.
ADD 1
Today I tried several Java installation packages. All are downloaded from Oracle official site.
jdk-6u45-windows-i586.exe
jdk-7u75-windows-i586.exe
jdk-8u20-windows-i586.exe
jdk-8u25-windows-i586.exe
jdk-8u31-windows-i586.exe
jdk-8u40-windows-i586.exe
Both 6u45 and 7u75 installed well on my box. I can see the install wizard. And the src.zip is installed.
But 8u25 ~ 8u40 all installed silently. And no src.zip file is installed because I have no chance to select it in the wizard.
I am not sure if this is my fault or someone at Oracle made a mistake.
As #SubOptimal commented, the /s option indicates a silent install. I am wondering if there's an option to force the GUI install wizard to open.
I am using Windows 7 Enterprise x64 Build 7601 SP1
Make sure the Source code is not disabled when downloading.
Then as you can see on the picture, selecting "Source Code" will tell you exactly where it is located.
Notice that I've downloaded the 32 bits version to make sure to reproduce the same use case as you.
Edit
As per your new edits and comments, it seems what you want to know now is why you don't see the installation wizards. I'm pretty sure this is due to old-set registry key.
Run the following command
reg query hklm\software\microsoft\windows\currentversion\installer\UserData\S-1-5-18\Products /f "java" /s | find "HKEY_LOCAL_MACHINE"
Now, navigate to each of the returned path browsing with regedit and delete their entire parent (the big hexa number).
Re-try the installation and I'm pretty sure you will see the wizard.
As for the sources, Oracle documentation specify how to download them in silent mode.
jdk.exe /s ADDLOCAL="SourceFeature"
This is the way I got the src folder from jdk-8u172-windows-x64.exe file without installing.
Step1: Download jdk-8u172-windows-x64.exe file (Java SE Development Kit 8u172) from oracle site
Step2: Extract it and navigate to the path:
\jdk-8u172-windows-x64.rsrc\1033\JAVA_CAB9
Step3: Right click on file named "110" and extract it.
You will get the src.zip file.
It took me little while to figure this out. I hope it will help others.
Enjoy debugging Good Code!
I don't know why/where the src.zip is, but as an alternative, if all you want is the source and somehow the proposed method doesn't work for you, you could always pull directly from the JDK8u40 source tree.
You will need Mercurial instead of Git. This link talks about the hg clone command
Quoting from the OpenJDK Java.net site
The corresponding master forest jdk8u can be cloned using this command: hg clone http://hg.openjdk.java.net/jdk8u/jdk8u;cd jdk8u;sh get_source.sh .
In addition, the source code for the last release, 8u40, is available by cloning the 8u40 master forest : http://hg.openjdk.java.net/jdk8u/jdk8u40. The final build of that release was tagged as jdk8u40-b25.
There are differences between OpenJDK and Oracle's, though subtle
download JDK 8 from following link
http://www.oracle.com/technetwork/java/javase/jdk-8-readme-2095712.html
src.zip comes in-built with it
if you JDK installer silently skips installing the source. just open the control panel > programs an features and find Java. Right click on it and select change and then select the
source (option) ;)
Download the JDK
Run the Installer, but stop right away
Extract src.zip from C:\Users\<your_username>\AppData\LocalLow\Oracle\ss180121.cab
You can extract .zip from .cab with tool like 7Zip
Taken from
I need a terminal that will support svn on windows and I found that MobaXterm is one of them. However going to their plugin installation page which says:
To install these plugins, just download them and put them in the same directory than the MobaXterm executable.
So I downloaded it and put it in the file
C:\Program Files (x86)\Mobatek\MobaXterm Personal Edition however I still get the error message
Sorry: Svn is not included in this version of MobaXterm.
You can check online if you find a Svn plugin for MobaXterm
by ctrl+clicking here: http://mobaxterm.mobatek.net .
If you need a custom version of MobaXterm that includes Svn,
do not hesitate to ask us for a quotation: mailto:contact#mobatek.net .
Does anyone have experience with this software or recommended a terminal that can support svn in windows?
You need to go into the C:\Program Files (x86)\Mobatek\MobaXterm Personal Edition or whichever edition you have and place the plugin there. Restart MobaXterm and it should work.
I normally collect all the plugins which I require from http://mobaxterm.mobatek.net/plugins.html
Once the .mxt3 files are getting downloaded, I moved them to the installed folder where the MobaXterm_.exe is there.
After restarting MobaXterm, this will work like a champ.
Hope if this solves your issue faster.
Start MobaXterm terminal.
Type MobApt or apt-get. This will open MobApt package manager.
Once in the package manager, you have a variety of tools/commands that you can install by simply selecting and pressing Install/Update.
i know the question is old. but you should put the plugin into your home.
if you check the setting you see this is the home directory
%CurrentDrive%:\Users\USERNAME\Documents\MobaXterm\home
witch is :
C:\Users\USERNAME\Documents\MobaXterm\home -- or whatever drive that u installed windows
i just installed the python plugin and it works fine
In Mobaxterm simply type : apt-get install subversion
Usable just right after installation. No need to restart.
Same for git.
Change the name of the .mxt3 file (that you downloaded) to .zip
Extract the files, get the .exe files you want from the bin folder
from the files you just extracted, and add them to the slash/bin
folder of the Mobaxterm (where there are more .exe files)
Restart
In order to finish your plugin installation, you need to restart MobaXterm. After restarting, type "svn" in the terminal and it should work.
Try run the command:
#unalias svn
When I saw $PATH and looked into its directories, there was no git.exe.
I downloaded git.mxt3 and put in program files (86) folder and restarted mobaterm.
After restart I can see a file named git.exe in my /bin folder. I am using Win7 (64 bit) and mobaXterm personal Edition v7.1 installed using windows installer (not portable )
MobaXterm already has a 'Packages' button where you can search for plugins and download them. You don't need to go to github and other places to find the necessary files. Just using the built-in search feature under the 'Packages' option at the top of MobaXterm.
A project I am working on requires an old version of SLAPD (the LDAP
server) and must run on Windows, hence I am using cygwin packages:
I've found a binary package of slapd version I need 2.2.x here:
http://www.mirrorservice.org/sites/sourceware.org/pub/cygwin/release/...
How do I manually install it in cygwin? It does not seem to be a package-manager file format (like an RPM or a Deb), but is there a tool to install it for me?
FYI, I'm operating behind a corporate firewall that prevents me from viewing the main cygwin site (including the documentation), so please nobody tell me to RTFM - I wish I could!
Thanks
If you need an older version, the Cygwin time machine might help. To use it, I had to invoke setup.exe from the command line, giving it the --no-verify/-X option and it still wouldn't let me downgrade the "cygwin" package itself but at least it is, albeit very slowly, allowing me to install the version I wanted to test as a parallel installation.
If you are using the cygwin package installer to install this package, usually if you select to view the full info and scroll to the package you need you will see some info about the version.
Now if you click on the version number you will see that it changes from the oldest in the repository to the current. If your repository has the version you need then just finish the wizard.
Some cygwin mirrors keep old package files, for example, http://mirror.isoc.org.il/pub/cygwin/
You can use Sonatype nexus to mirror an existing cygwin repository, but provide your own setup.ini .
Copy the already downloaded repo content to c:\progs\nexus\sonatype-work\nexus\storage\mirror.isoc.org.il-pub-cygwin\
Put your own setup.ini and setup.bz2 there.
Start setup.exe with --no-verify
Paste
http://localhost:8081/nexus/content/repositories/mirror.isoc.org.il-pub-cygwin/
into the mirror selection box and click "Add"