I have foo.exe which is using some of Windows API functions. I want to get memory addresses of those functions, how do I do that? Any software available which I can use?
Note, that I am looking for non-programatically way of doing that.
Thanks
I am looking for non-programatically way of doing that.
Either this is not possible or it doesn't make any sense. Likely both.
You see, in order to call one of the Windows API functions, a program must import it from the DLL that contains the function of interest. This requires that DLL to be loaded into the address space of that program's process. And because each process has its own address space, each process gets its own unique instance (or copy) of the DLL. That means that the "memory address" of functions provided by DLLs is going to be different in each process.
Retrieving this information non-programmatically just doesn't make sense. Even if you could get it, it wouldn't do you any good.
I could probably provide better advice if you edited your question to explain what you're hoping to accomplish, rather than just asking about the approach you already settled upon.
The addresses of exported functions can be different for every process that loads the DLL. The GetProcAddress function can tell you what they are for your process.
Related
Ok, it may be a bit difficult to explain:
Suppose someone creates a Windows application (using C# or any other language) that uses the GetDesktopWindow() function on the user32.dll to capture a Screenshot and then sends this image to any online service.
Since it's custom made application, no anti-virus software will be able to determine that it's a virus because it's still an unknown application for it. Also, there are legitimate uses for such API, so it's not necessarily a virus, it can be a harmless window capture tool or some kind of espionage tool.
What I want to know is: Is there any way to see what a specific EXE file does regarding the Windows functions? Can I know if "myapp.exe" uses GetDesktopWindow() of user32.dll?
This is only one example. There are plenty other Windows endpoints that I would like to know when they're used by any application.
Is there a way to do that?
It depends to what lengths you want to go doing that. It's essentially a game of cat and mouse - bad actors will attempt to find new ways to circumvent your detection by jumping through some obscure hoops, you will add more sophisticated detection methods for those tricks, they will think of new tricks, and so on.
Also, it depends on whether you want to statically or dynamically determine that, and whether you actually want to know if GetDesktopWindow is called or if "the program gets a handle to the desktop window" (which can be achieved in other ways as well).
Here is a non-exhaustive list of ideas:
You could statically determine whether the function is imported by looking at the import directory. Research the PE file structure to find out more. This article may help.
This method of detection can be easily circumvented by dynamically importing the function using LoadLibrary and GetProcAddress.
You could scan the file for the string GetDesktopWindow to detect possible usage for dynamic import.
This method of detection can be easily circumvented by packing, encrypting or otherwise obfuscating the name of the dynamically imported function.
You could dynamically observe whether the GetDesktopWindow function gets called by registering an AppInit_DLL or a global hook which is injected into every new process and hook the GetDesktopWindow function from inside the process by overwriting its first bytes with a jump to your own code, notifying your detection component somehow, executing the original bytes and jumping back. (Microsoft Detours can help there.)
This method of detection can be circumvented if the target notices the hook and removes it before calling, since its in its own process space. (You could also do some tricks with acting like a debugger and setting a hardware breakpoint on the first instruction of GetDesktopWindow, but yet again there would be ways to detect or circumvent that since the target could also modify the debug registers.)
You could build a driver that does this from kernel-mode instead, but now we are getting really deep.
Note that until now we focused on the actual GetDesktopWindow function from user32.dll. But what if the target will just use a different way to achieve its goal of getting a desktop window handle?
The desktop window handle for the current thread is stored in the TIB (thread information block) which is accessible via fs:[18] from user mode. You can see this in the GetDesktopWindow source code of ReactOS which is pretty accurate compared to Microsoft's actual implementation (which you can verify by looking at it in a debugger). The target could therefore just access the TIB and extract this value, without even calling GetDesktopWindow at all.
The target could just take a known top-level window such as the shell's hidden compatibility window which you'll get via GetShellWindow() or - to avoid detection of GetShellWindow too - for example FindWindow(NULL, "Program Manager") (or even a newly created window!) and call GetAncestor(hWnd, GA_PARENT) on it to get the desktop window handle.
I'm sure, with some creativity, your adversaries will come up with more clever ideas than these.
Also, if we take this one step further and take a look at the ultimate goal of taking a screenshot, there as well exist other ways to achieve that. First example coming to mind: They could use keybd_event to emulate pressing the PrnSc key and then read the screenshot out of the clipboard data.
So it's all a matter of how far you want to take this.
By the way, you may find the drltrace project interesting - it is a library call tracer.
Is there a straigtforward way with ready-at-hand tooling to suspend a traced process' execution when a certain syscalls are called with specific parameters? Specifically I want to suspend program execution whenever
stat("/${SOME_PATH}")
or
readlink("/${SOME_PATH}")
are called. I aim to then attach a debugger, so that I can identify which of the hundreds of shared objects that are linked into the process is trying to access that specific path.
strace shows me the syscalls alright, and gdb does the rest. The question is, how to bring them together. This surely can be solved with custom glue-scripting, but I'd rather use a clean solution.
The problem at hand is a 3rd party toolsuite which is available only in binary form and which distribution package completely violates the LSB/FHS and good manners and places shared objects all over the filesystem, some of which are loaded from unconfigurable paths. I'd like to identify which modules of the toolsuite try to do this and either patch the binaries or to file an issue with the vendor.
This is the approach that I use for similar condition in windows debugging. Even though I think it should be possible for you too, I have not tried it with gdb in linux.
When you attached your process, set breakpoint on your system call which is for example stat in your case.
Add a condition based on esp to your breakpoint. For example you want to check stat("/$te"). value at [esp+4] should point to address of string which in this case is "/$te". Then add a condition like: *(uint32_t*)[esp+4] == "/$te". It seems that you can use strcmp() in your condition too as described here.
I think something similar to this should work for you too.
Anyone knows anything about running executable from memory in OSX?
anything like this:
char *exeFile[size];
loadFromFile(exeFile, "/path/to/data");
execute(exeFile);
I want do that for security reasons. for example It is possible to encrypt exe and decrypt it before launch.
Well, yes, you can do it but its complex. I don't have access to working code right now but I do know others that are/have used it. The key is "NSCreateObjectFileImageFromMemory()", which is deprecated, but that said a few big apps like Skype reputed use it so its probably not going to disappear anytime soon (YMMV).
You have to allocate a memory buffer that's a multiple of the pagesize with vm_allocate. Copy the mach-o executable of the same architecture as the current process to there. Call NSCreateObjectFileImageFromMemory() which returns an object image. Then call successively NSLinkModule, NSLookupSymbolInModule and NSAddressOfSymbol. That last one gets you an actual function pointer to call.
This should give you most of what you need to know, and if you search you may find code that does it too. Good luck!
I'm working on a third-party program that aggregates data from a bunch of different, existing Windows programs. Each program has a mechanism for exporting the data via the GUI. The most brain-dead approach would have me generate extracts by using AutoIt or some other GUI manipulation program to generate the extractions via the GUI. The problem with this is that people might be interacting with the computer when, suddenly, some automated program takes over. That's no good. What I really want to do is somehow have a program run once a day and silently (i.e. without popping up any GUIs) export the data from each program.
My research is telling me that I need to hook each application (assume these applications are always running) and inject a custom DLL to trigger each export. Am I remotely close to being on the right track? I'm a fairly experienced software dev, but I don't know a whole lot about reverse engineering or hooking. Any advice or direction would be greatly appreciated.
Edit: I'm trying to manage the availability of a certain type of professional. Their schedules are stored in proprietary systems. With their permission, I want to install an app on their system that extracts their schedule from whichever system they are using and uploads the information to a central server so that I can present that information to potential clients.
I am aware of four ways of extracting the information you want, both with their advantages and disadvantages. Before you do anything, you need to be aware that any solution you create is not guaranteed and in fact very unlikely to continue working should the target application ever update. The reason is that in each case, you are relying on an implementation detail instead of a pre-defined interface through which to export your data.
Hooking the GUI
The first way is to hook the GUI as you have suggested. What you are doing in this case is simply reading off from what an actual user would see. This is in general easier, since you are hooking the WinAPI which is clearly defined. One danger is that what the program displays is inconsistent or incomplete in comparison to the internal data it is supposed to be representing.
Typically, there are two common ways to perform WinAPI hooking:
DLL Injection. You create a DLL which you load into the other program's virtual address space. This means that you have read/write access (writable access can be gained with VirtualProtect) to the target's entire memory. From here you can trampoline the functions which are called to set UI information. For example, to check if a window has changed its text, you might trampoline the SetWindowText function. Note every control has different interfaces used to set what they are displaying. In this case, you are hooking the functions called by the code to set the display.
SetWindowsHookEx. Under the covers, this works similarly to DLL injection and in this case is really just another method for you to extend/subvert the control flow of messages received by controls. What you want to do in this case is hook the window procedures of each child control. For example, when an item is added to a ComboBox, it would receive a CB_ADDSTRING message. In this case, you are hooking the messages that are received when the display changes.
One caveat with this approach is that it will only work if the target is using or extending WinAPI controls.
Reading from the GUI
Instead of hooking the GUI, you can alternatively use WinAPI to read directly from the target windows. However, in some cases this may not be allowed. There is not much to do in this case but to try and see if it works. This may in fact be the easiest approach. Typically, you will send messages such as WM_GETTEXT to query the target window for what it is currently displaying. To do this, you will need to obtain the exact window hierarchy containing the control you are interested in. For example, say you want to read an edit control, you will need to see what parent window/s are above it in the window hierarchy in order to obtain its window handle.
Reading from memory (Advanced)
This approach is by far the most complicated but if you are able to fully reverse engineer the target program, it is the most likely to get you consistent data. This approach works by you reading the memory from the target process. This technique is very commonly used in game hacking to add 'functionality' and to observe the internal state of the game.
Consider that as well as storing information in the GUI, programs often hold their own internal model of all the data. This is especially true when the controls used are virtual and simply query subsets of the data to be displayed. This is an example of a situation where the first two approaches would not be of much use. This data is often held in some sort of abstract data type such as a list or perhaps even an array. The trick is to find this list in memory and read the values off directly. This can be done externally with ReadProcessMemory or internally through DLL injection again. The difficulty lies mainly in two prerequisites:
Firstly, you must be able to reliably locate these data structures. The problem with this is that code is not guaranteed to be in the same place, especially with features such as ASLR. Colloquially, this is sometimes referred to as code-shifting. ASLR can be defeated by using the offset from a module base and dynamically getting the module base address with functions such as GetModuleHandle. As well as ASLR, a reason that this occurs is due to dynamic memory allocation (e.g. through malloc). In such cases, you will need to find a heap address storing the pointer (which would for example be the return of malloc), dereference that and find your list. That pointer would be prone to ASLR and instead of a pointer, it might be a double-pointer, triple-pointer, etc.
The second problem you face is that it would be rare for each list item to be a primitive type. For example, instead of a list of character arrays (strings), it is likely that you will be faced with a list of objects. You would need to further reverse engineer each object type and understand internal layouts (at least be able to determine offsets of primitive values you are interested in in terms of its offset from the object base). More advanced methods revolve around actually reverse engineering the vtable of objects and calling their 'API'.
You might notice that I am not able to give information here which is specific. The reason is that by its nature, using this method requires an intimate understanding of the target's internals and as such, the specifics are defined only by how the target has been programmed. Unless you have knowledge and experience of reverse engineering, it is unlikely you would want to go down this route.
Hooking the target's internal API (Advanced)
As with the above solution, instead of digging for data structures, you dig for the internal API. I briefly covered this with when discussing vtables earlier. Instead of doing this, you would be attempting to find internal APIs that are called when the GUI is modified. Typically, when a view/UI is modified, instead of directly calling the WinAPI to update it, a program will have its own wrapper function which it calls which in turn calls the WinAPI. You simply need to find this function and hook it. Again this is possible, but requires reverse engineering skills. You may find that you discover functions which you want to call yourself. In this case, as well as being able to locate the location of the function, you have to reverse engineer the parameters it takes, its calling convention and you will need to ensure calling the function has no side effects.
I would consider this approach to be advanced. It can certainly be done and is another common technique used in game hacking to observe internal states and to manipulate a target's behaviour, but is difficult!
The first two methods are well suited for reading data from WinAPI programs and are by far easier. The two latter methods allow greater flexibility. With enough work, you are able to read anything and everything encapsulated by the target but requires a lot of skill.
Another point of concern which may or may not relate to your case is how easy it will be to update your solution to work should the target every be updated. With the first two methods, it is more likely no changes or small changes have to be made. With the second two methods, even a small change in source code can cause a relocation of the offsets you are relying upon. One method of dealing with this is to use byte signatures to dynamically generate the offsets. I wrote another answer some time ago which addresses how this is done.
What I have written is only a brief summary of the various techniques that can be used for what you want to achieve. I may have missed approaches, but these are the most common ones I know of and have experience with. Since these are large topics in themselves, I would advise you ask a new question if you want to obtain more detail about any particular one. Note that in all of the approaches I have discussed, none of them suffer from any interaction which is visible to the outside world so you would have no problem with anything popping up. It would be, as you describe, 'silent'.
This is relevant information about detouring/trampolining which I have lifted from a previous answer I wrote:
If you are looking for ways that programs detour execution of other
processes, it is usually through one of two means:
Dynamic (Runtime) Detouring - This is the more common method and is what is used by libraries such as Microsoft Detours. Here is a
relevant paper where the first few bytes of a function are overwritten
to unconditionally branch to the instrumentation.
(Static) Binary Rewriting - This is a much less common method for rootkits, but is used by research projects. It allows detouring to be
performed by statically analysing and overwriting a binary. An old
(not publicly available) package for Windows that performs this is
Etch. This paper gives a high-level view of how it works
conceptually.
Although Detours demonstrates one method of dynamic detouring, there
are countless methods used in the industry, especially in the reverse
engineering and hacking arenas. These include the IAT and breakpoint
methods I mentioned above. To 'point you in the right direction' for
these, you should look at 'research' performed in the fields of
research projects and reverse engineering.
I am writing a scriptable game engine, for which I have a large number of classes that perform various tasks. The size of the engine is growing rapidly, and so I thought of splitting the large executable up into dll modules so that only the components that the game writer actually uses can be included. When the user compiles their game (which is to say their script), I want the correct dll's to be part of the final executable. I already have quite a bit of overlay data, so I figured I might be able to store the dll's as part of this block. My question boils down to this:
Is it possible to trick LoadLibrary to start reading the file at a certain offset? That would save me from having to either extract the dll into a temporary file which is not clean, or alternatively scrapping the automatic inclusion of dll's altogether and simply instructing my users to package the dll's along with their games.
Initially I thought of going for the "load dll from memory" approach but rejected it on grounds of portability and simply because it seems like such a horrible hack.
Any thoughts?
Kind regards,
Philip Bennefall
You are trying to solve a problem that doesn't exist. Loading a DLL doesn't actually require any physical memory. Windows creates a memory mapped file for the DLL content. Code from the DLL only ever gets loaded when your program calls that code. Unused code doesn't require any system resources beyond reserved memory pages. You have 2 billion bytes worth of that on a 32-bit operating system. You have to write a lot of code to consume them all, 50 megabytes of machine code is already a very large program.
The memory mapping is also the reason you cannot make LoadLibrary() do what you want to do. There is no realistic scenario where you need to.
Look into the linker's /DELAYLOAD option to improve startup performance.
I think every solution for that task is "horrible hack" and nothing more.
Simplest way that I see is create your own virtual drive that present custom filesystem and hacks system access path from one real file (compilation of your libraries) to multiple separate DLL-s. For example like TrueCrypt does (it's open-source). And than you may use LoadLibrary function without changes.
But only right way I see is change your task and don't use this approach. I think you need to create your own script interpreter and compiler, using structures, pointers and so on.
The main thing is that I don't understand your benefit from use of libraries. I think any compiled code in current time does not weigh so much and may be packed very good. Any other resources may be loaded dynamically at first call. All you need to do is to organize the working cycles of all components of the script engine in right way.