When I am installing Tableau server I am seeing this server. I am the administrator of the system but still I was seeing the message.Please help me in this regard
It's often safer to use the default NTAuthority\NetworkService account if you're installing Tableau Server for the first time, since this is (almost always) guaranteed to work and can always be changed later.
If you do want to proceed with using SriHarsha-PC\SriHarsha as the Run As account, then take a look at the following link from the Tableau Software Knowledge Base which lists all of the permissions that your chosen account will need in order to run Tableau Server correctly.
Tableau Server Run As account permissions
If that does not provide sufficient information, then create a support request and Tableau Technical Support will try and help resolve the issue.
Related
I have recently installed Integration Runtime for a local server which hosts an Access DB. The idea is to pull data from it and store in in Azure SQL DB. I have done the following:
Integration Runtime Services Installed on local machine hosting the MS Access DB and connected to it using ODBC
Created linked services in ADF to connect to the DB
Created Datasets for source and destination DB for each table required. One for the source msaccess and one for the target in azure sql db
Created a pipeline to copy the data from the source and sink into the asql db mentioned in step #3
Basically, all the connections work however when I trigger my pipeline to load around 10 of these tables, it runs and loads the first two and then fails afterwards by timing out. I must restart the Integration Runtime everytime to get it back up and running otherwise I can no longer query the tables.
To mitigate this I figured there was too much traffic and the server needed to rest between calls so I added wait timers in between each step of the pipelines but not much success. It did help a bit but that might be coincidence.
The error log in the monitor spits out at the failed step is :
Error: 2200
ErrorCode=UserErrorFailedToConnectOdbcSource,'Type=Microsoft.DataTransfer.Common.Shared.HybridDeliveryException,Message=,Source=Microsoft.DataTransfer.Runtime.GenericOdbcConnectors,''Type=System.Data.Odbc.OdbcException,Message=,Source=,'
btw the integration runtime install service running is 5.12.7984.1 and the version of access installed is through office 365 x64. The exact MS access driver is 16.14430.20006. The OS is Windows Server 2019
I am getting the exact same error. To start, I did check the event viewer logs and saw some errors to do with access. So I gave the user running the IR more access to the registry keys/general log on as a service rights. This helped a little, but I am still stuck with the same problem.
When copying from an Access DB located on the SHIR itself to flat files in lake storage, I encountered the same error.
Removing Office 365 from the machine, then re-installing the Access runtime solved the problem.
This answer is from #ezaidi comments above.
I have a computer that is used for getting database information from the server in the same domain, and this computer is used by employees who don't have the server admin information.
When the computer restarts, I'd like it to automatically log in to Windows Server so that it can access the database files. Is it possible to write a script for this that runs on boot?
Thanks in advance
I solved this by adding the credentials to the Credentials Manager in Windows, along with disabling the Windows Server dashboard program. This makes Windows automatically log in to the server with the stored credentials on boot.
Since your question really isn't specific, I'd like to suggest two ways of accomplishing your goal.
Since you'd like to access database information, why not use some kind of database management software (like SSMS if you're using MSSQL) and set up proper permissions for the user/computer that will need to obtain information from that particular server/database.
If you need access to raw files (which doesn't make much sense in case of MSSQL for accessing purposes), why not set up proper permissions on the file or parent folder, giving the user that is logged to the client PC proper permissions to access the files that are of interest.
Recently I have installed and configured the Oracle BPM Suit and able to access Oracle Business Process Composer using the link as mentioned below
http://localhost:7001/bpm/composer/
But sometimes it take too long time to enter me to the dashboard and shows "Authentication Service Error, please contact the Administrator".
I have done the windows environment setup.
I have checked my credentials and sometimes it allows me to enter but sometimes this annoying message comes to me. I don't know what's wrong with the authentication service. I'll be grateful for any help/recommendation.
I went through the same problem, here are some suggestions:
Remove DOMAIN and create another, remembering that everything will be lost;
Create another user WebLogic;
If you want to solve the problem look for logs on WebLogic or in the DOMAIN directory, to understand the problem;
Recently consultants ORACLE were here on business and found that the 12c version is not stable. Look for patches on the Oracle website.
i have a curious issue. When i start the connect manager i see a white window with the following error message: svwrap $Revision: 1.36 $
Error #619 security: script is world-writable
Does anyone have an idea what could be? I know what "world-writable" means but what file it might be? Thanks for an answer. Hermann
I'd contact your hosting company this. This message isn't generated by Magento, it's generated by a program your web hosting company has installed to scan for world writable scripts.
Also, you may want to consider a different web-host if you need to use Magento Connect's web UI. This feature requires the Magento web server user have write access to the Magento installation to download and update files. It sounds like your hosting company may not be down with that.
All that said, my guess is it's, at minimum, the downloader/index.php file.
I have ColdFusion Builder 2.0.0 installed and I am trying to look at the much vaunted step debugging. However, I cannot seem to get it to work as I don't have my site / JRun install setup in the naive way the examples show.
I am using version 9,0,1,274733 of ColdFusion and my configuration is as follows:-
Installed as multi-server version with Jrun here:- c:\Apps\JRun4
application files are here:- d:\websites\my.website.com
web root is here d:\websites\my.website.com\www
core library of CFCs is here d:\websites\frameworks\core which is mapped in CF as core
I have read this watched this http://help.adobe.com/en_US/ColdFusionBuilder/Using/WS0ef8c004658c1089-31c11ef1121cdfd6aa0-7fff.html and this http://forta.com/blog/index.cfm/2007/5/30/CF8-Debugger-Getting-Started and watched this https://experts.adobeconnect.com/_a204547676/p33029638/?launcher=false&fcsContent=true&pbMode=normal but I get stuck at the point after you have configured RDS and you are setting up the server for your project.
Now I am pretty sure the above is correct, when I move to the next page in the wizard I get the following:-
Now I as I understand it my Server Home should be c:\Apps\JRun4 and my Document root should be d:\websites\my.website.com
This all looks like it is going to be fine until you actually try and debug when I get
followed by
I can confirm that the server is running and RDS is enabled as in the RDS Dataview I can see all my databases.
Any help would be gratefully received as this is very frustrating and the documentation is very lacking.
There is a video tutorial as well that you may want to check and see if that helps. http://blogs.adobe.com/anand/2011/01/learn-how-to-debug-coldfusion-applications-using-coldfusion-builder-2.html
You need to specify the RDS username/password and the "application server name". If you are using the base instance that was installed when you setup the multiserver install of CF that is "cfusion", otherwise its the name of the instance you are using.
The RDS username is most likely "admin" unless you setup custom users for RDS. The password is the RDS password you specified when you installed CF.