I can't debug any application on my iPhone. XCode compiles the application, deploys it to iPhone, says it is running the app, and immediately I see the message "Finished running x.app on iDevice". Although the app crashes, it is copied to the phone. After this crash I can start the application on the phone without problems but can't seem to debug any project on the phone. No old projects, no new projects, everything seems to be broken.
There are lots of advices to solve this problem on SO but none of them helped me a bit.
I use XCode 4.6 on Mac OSX 10.8.2.
had the same problem when i changed the project name and the app name.
i've done several times reset to the simulator 'ios simulator' --> 'reset....'.
try it, also try to delete old app in device and simulator, do 'product' --> 'clean', and then try again.
it sounds silly but its working for me when i has the same issue.
Try changing the Version number in 'deployment target' in your App's target in XCode to something else.
Does it run in your Simulator?
Try running in some other device (some other device version,like 4S or 4)
Is the issue with iPad or iPhone or both?
Related
Xcode gives me this message every-time I try running my app on my iPhone. (Works fine on the simulator.) (And this occurs in every project I have.) (I also just downloaded Xcode again.)
This is the message I get.
App Installation Failed.
Unknown Error Occurred.
How do I fix this error?
Unplugging iOS Device and plugging it back it in fixed it for me.
Alright, it was a simple fix:
Go into Xcode Preferences -> Accounts -> More Info. Hit the refresh icon.
Clean your project. Project -> Clean.
Force quit Xcode.
Reboot Mac and Device.
If you have the same App but downloaded from AppStore, I suggest to remove the App manually from your device, then try to run the new version with XCode.
After following the suggestions in this thread (restarting iPhone, cleaning Xcode project, quitting and re-launching Xcode) and others (setting Team to None then back to my Team) and unplugging and replugging Lightning connector from my iPhone 6 I was still experiencing this problem. Xcode would even display an error that my iPhone 6 was locked, even though it was not.
I was able to fix it by unplugging the USB-A connector of the USB to Lightning cable from my MacBook Pro, then plugging it back in. I'm not sure why that made the difference, but glad that it did resolve this annoying problem.
I have this issue regularly. There are a number of techniques that help me overcome it, including the classic "turn it off and back on again."
One thing that isn't mentioned here is that the iPhone should be switched on, unlocked, connected to the mac and then the app should be run (with the iPhone unlocked). Don't lock it!
Make sure your device name doesn't have any emoji (Xcode 11.0)
if you using vpn services, then you need to turn off vpn. Works for me
When I run my application on my iPad, the application opens then closes instantaneously after "build succeeded". I can run my app on iPhones without problems. My iPad iOS version is 8.1 and my Xcode is 6.2.
I get no error message just "CoreFoundation = 1141.140000" as output. I have searched the web up and down, but can't seem to get an answer. Does anybody know what's wrong?
The problem was the Ipad because it was jailbraked. After reinstalling it all worked fine.
Using Xcode 5 GM, anytime I switch to the 5.1, 6.0 or 6.1 simulators to test, I get the error "iOS Simulator failed to install application." When I reset the simulator it works, but this is getting very tiring.
Anybody have a permanent fix or workaround?
Looks like this is a known issue. From the Xcode 5 release notes:
After switching the minimum deployment target of an application from
iOS 7.0 to a release prior to iOS 7.0, building and running the
application may fail with the message “iOS Simulator failed to install
the application.”
Go to the iOS home screen, click and hold the application icon, then tap the hovering “X” button to delete the application. 13917023
Another release note:
iOS Simulator
If an iOS app is detached, relaunching the same app from Xcode will
result in a black screen in the Simulator even though the new app is
launched. Terminate the app in the Simulator or relaunch it for the
second time. 14648784
Delete the old version app in your simulator (usually iOS 6.x).
Alternatively, header over to iOS Simulator - Reset Content and Settings.
This can be easier when you have a lot of apps on the simulator and can't remember which one you're currently working on.
You need to do this for every iOS Simulator version that causes the problem.
None of the other suggestions worked for me. However, after comparing my existing app settings to a new vanilla project, I noticed that the "Build" field for my Target was blank. Once I put something in that field, the app installed just fine!
if you have already developed project and you used xib to develop views then
X-Code > Inspector Selector Bar > Interface Builder Document > opens in > and change from Xcode Default(5.o) to Xcode 4.6 .
Build and Run your app it will run successfully, if it won't run again then, header over to iOS Simulator - Reset Content and Settings. delete old app from simulator then Run again.
i got the same problem but solved by following way....
Launch the iOS Simulator
Go and click "iOS Simulator" menu
Click "Reset content and settings"
Close simulator and rebuild your app.
Above screen shot is showing the way how you can do this...
I think this works for you...!!!
Deleting the app in the simulator works for me.
just wanted to add that this happen only if I open xib that created in xcode 4.6
If it's other files, this not happen
try this ....
in my case nothing have worked for me , after resetting the content simulator also , i am not able to install the app on simulator . after that i just changed my project location . i just moved the project to other location . then it installed successfully.
None of the above things worked for me. I just reinstalled xcode and it worked.
Ran into this issue today. Found it was an empty Reference Folder (blue folder) causing this. Removed the folder from Resources in Build Phase... cleaned build folder for the heck of it, and it went away.
/Users/YOURUSERNAME/Library/Developer/Xcode/ --> remove all contents of this folder, then simply launch the app from Xcode.
To check your Executable file settng ex.$(EXECUTABLE_NAME)
(Project setting - info property page)
I have different issue when getting error message “iOS Simulator failed to install application”, the reason is because I have added a property in App-Info.plist without any value. For instance, [Application Category] with no value. Thus the error will show up as well.
When I got this error, the image of the phone actually appeared, but the image of the app I wanted to test did not. Instead, I was on the main page of the phone that shows the apps you have. I fixed this problem by deleting the many icons that appeared on the start screens - about 30 of them. These had been created when I testing apps over the months. So, not saying its a solution, but it started working after I deleted the old app images.
For me it was -framework XCTest.
It made the app die with iOS Simulator failed to install application
and on the device Could not inspect the application package.
Removed it and now works.
You are using Xcode GM which is under beta stage. Use latest Xcode 5.1.1 available.
Also, these error occur while switching between simulator (32 bit and 64 bit).
Quit the simulator and re-build the application. OR
Reset simulator from "iOS simulator" -> "Reset content and settings.."
I changed my app name and bundle id midway. I happened to delete the Executable File name in my plist. I changed it back to "${EXECUTABLE_NAME}" (no quotes) and I'm back in business.
I have been having this Xcode problem for a couple of months where my iOS simulator stops working whenever i run any application on Xcode and says, "The simulated application quit." and "iOS Simulator could not find the SDK. The SDK may need to be reinstalled." I am running Xcode 4.3.3 and have iOS sdk 5.1 and everything updated but it happened on my previous version of Xcode also. I have tried reinstalling Xcode over 10 times now and have been posting this question for a while now. No one has been able to get a solution. I have even sent in a bug report to apple but i don't think they will respond. I have tried doing everything every other person that has this problem has been told to do in other threads. I'm honestly thinking about just buying a new mac and seeing if Xcode will work on that one or taking in my current one to get looked at by apple. So if anyone has any ideas please let me know.
Go to Xcode -> Preferences -> Downloads and make sure the "Target SDK" you have selected in your project is in fact installed under the Downloads windows. For me this magically was uninstalled. Once i installed the SDK that my app was using, all worked again
This worked for me: http://www.colinbowern.com/posts/the-simulated-application-quit
I just deleted the folder "6.1" under ~/Library/Application Support/iPhone Simulator
The I just launched again the app and the simulator recreated correctly the 6.1 folder.
Resetting the simulator settings (iOS Simulator > Reset Contents and Settings) resolved this issue for me.
I had the same issue. For me suddenly all the installed simulators (4.3 through to 6.0) stopped working. I then went to Xcode -> Preferences -> Downloads, and there I had the chance to update at least the 5.0 simulator. This is now working, yet I was not able to get the 4.3 or 5.1 or 6.0 to work.
I have personally experienced a weird thing with xcode regarding this issue. Sometimes the sdk is installed properly but it still gives this error. I have two classes, if I call first class from the app delegate then the ipad simulator works fine but when I call the second class then it gives the error that the sdk needs to be re-installed.
In my case when the error occured, I had two errors in the second class. When I corrected the errors after debugging, the ipad simulator started to work completely fine. This is quite weird but its not the problem with your sdk, the problem is somewhere in the code.
This just happened to me. I tried to launch with iPhone 5.1 Simulator, got the error "iOS Simulator could not find the SDK. The SDK may need to be reinstalled." I tried running iPad 5.1 Sim, which worked. I switched to non-retina iPad. Then I tried running iPhone 5.1 Simulator again, and it worked.
I have seen many question like this before but in my case it is not working only on iPad.
I have breakpoints that are not working in iPad but when I Run my application on Simulator or on the iPhone all the breaking point are working properly.
I have tried install SDK again, Delete the previous build, clean , clean all target & Load Symbols Lazily.
Try deleting the app from the iPad, restart, clean the project, run normaly, stop, activate breakpoints, and re-try.
Sometimes when Xcode is started and device is already connected to MAC, the device appears in XCode even if the device iOS version is higher than the XCode iOS version. At this time the break point doesn't work.