Xcode gives me this message every-time I try running my app on my iPhone. (Works fine on the simulator.) (And this occurs in every project I have.) (I also just downloaded Xcode again.)
This is the message I get.
App Installation Failed.
Unknown Error Occurred.
How do I fix this error?
Unplugging iOS Device and plugging it back it in fixed it for me.
Alright, it was a simple fix:
Go into Xcode Preferences -> Accounts -> More Info. Hit the refresh icon.
Clean your project. Project -> Clean.
Force quit Xcode.
Reboot Mac and Device.
If you have the same App but downloaded from AppStore, I suggest to remove the App manually from your device, then try to run the new version with XCode.
After following the suggestions in this thread (restarting iPhone, cleaning Xcode project, quitting and re-launching Xcode) and others (setting Team to None then back to my Team) and unplugging and replugging Lightning connector from my iPhone 6 I was still experiencing this problem. Xcode would even display an error that my iPhone 6 was locked, even though it was not.
I was able to fix it by unplugging the USB-A connector of the USB to Lightning cable from my MacBook Pro, then plugging it back in. I'm not sure why that made the difference, but glad that it did resolve this annoying problem.
I have this issue regularly. There are a number of techniques that help me overcome it, including the classic "turn it off and back on again."
One thing that isn't mentioned here is that the iPhone should be switched on, unlocked, connected to the mac and then the app should be run (with the iPhone unlocked). Don't lock it!
Make sure your device name doesn't have any emoji (Xcode 11.0)
if you using vpn services, then you need to turn off vpn. Works for me
Related
I updated to the latest AppStore release of Xcode (12.3, 12C33).
It worked fine for an hour or two. After that it started to constantly freeze after being open for a few seconds to minutes.
I've tried the following, all without success so far:
restart macOS
clear derived data
tried with different projects
updating to latest macOS 11
Any other ideas or suggestions how to fix this?
Update
I can confirm that this is fixed in Xcode 12.5
I found an answer by Darr on the question "Xcode freezes after upgrade to 12.3" on Apple's developer forums that worked for me:
Unpairing my device connected via network and using only lightning cable seems to have resolved the issue for me.
Xcode > Window > Devices and Simulators > device > Connect via network
After going mad, I fixed this by removing all devices from Devices and Simulators (I had connect via network activated).
For now, it's working fine.
Power off your Apple Watch
Xcode may hang if the host Mac is connected to an iOS device which has one or more companion watches. The hangs occur when the watches aren't fully prepared for development, or if they are experiencing poor wireless connectivity. (72490921) (FB8945320)
Workaround: Power off the watches, or unpair them from the iPhone.
Xcode 12.4 Release Notes
You can force Xcode to freshly prepare a watch for development using these steps:
Force-quit Xcode.
Power-off and disconnect all iOS device from the Mac.
Reboot the Mac.
Launch Xcode, close all projects, and open the Devices and Simulators window.
Power-on and unlock an iOS device and its companion watchOS devices by entering the passcode as required.
Plug the iOS device into the Mac using USB cable.
Check each iOS device and each watch for any pairing request and approve the requests.
Monitor the status of device preparation in the Devices and Simulators window. If Xcode presents device-preparation errors, follow the guidance in the error message to resolve the error.
Once Xcode finishes preparing the iOS device and its companion watches for development, repeat steps 5 through 8 for each remaining iOS device and its companion watches until you verify that Xcode has prepared all devices for development. You may now open your Xcode projects and resume development.
I've been having the same problem. I had an iOS device connected via USB, unplugged it and it un-froze. Then I continued to have issue requiring force close each time.
I then clear derived data and things have been fine. I opened a StickerPack project and also had the same issue. Clearing DerivedData also fixed it.
Clear Derived Data:
Xcode pulldown menu > Preferences > Locations tab
Click the little arrow next to the path under Derived Data.
Delete the entire folder for you project. It will look like "MyAppName-bwonddotztrgkkfexrjxoncvmjit"
See this explanation about whether it's safe to delete DerivedData for your project.
I had the same problem with appstore version and someone advised to install from site, now it works fine. https://developer.apple.com/download/more/
Disable WLAN on my iMac fixes the problem currently.
Hope they will releast a fix very soon.
Xcode 12.3 is unstable and many times it crashes.
I reverted back to Xcode 12 and copied disk image of 14.3 in Device Support folder of Xcode (Contents > Developer > Platforms > iPhoneOS.platforms-DeviceSupport).
This I needed to debug on iPhone device having version iOS 14.3
https://github.com/mspvirajpatel/Xcode_Developer_Disk_Images/releases
I recently had similar situation. My Xcode 12.3 project could not be opened. I tried to open directly from popup that appears on start of the Xcode.
What worked for my was to downgrade Xcode to 12.2 and launch Xcode on new project. And then click my old one.
Maybe it would work without downgrading but I didn't check.
I had this problem too. I fixed it by going Devices and Simulators in the Windows file and disconnecting the iPhone reference I had for my phone when testing and app. Since the phone was no longer connected, its presence seemed to create a freeze.
In my case XCode 12.5 hangs/freezes on startup more or less instantly, right after it opens kind of an empty workspace.
I removed everything that I could imagine that deals with XCode on my machine, but it didn't help.
At the end I just used the hotkey for "Close Workspace" - Ctrl+Alt+Cmd+W
I hit this combo very often, very fast right after opening XCode and it worked!
The strange empty workspace showed up and closed instantly - now I could select other projects and everything works again.
There could be the multiple reasons and in my case reason was source control
preferences > Source Control > uncheck Enable source control
I have these performance problems with the newly updated Xcode from the AppStore to 12C33 (Xcode frozen for many seconds, instability of interface builder, etc.) only with apps which have frameworks added with cocoa pods and when working in the xcworkspace-file. (Integration of frameworks with Catharge even fail with error message 65). I'm running Xcode under macOS Catalina. Don't know what the technical reason could be, hence would appreciate if someone has an idea on this how to fix it.
Update: In the meantime I could fix it:
I eliminated my own devices from the device list and did then a deintegration and a new install of the cocoa pods for the projects. Afterwards I setup my devices again in the device list and all worked well again. Only eliminating and reintegration of my devices as described above didn't work in my case.
I am developing an app that uses GPS. In the simulator I always used the location simulation feature of Xcode which always worked for me.
I selected the Debug - Location - Freeway Drive option in Xcode 10.
Whenever I select some preset to simulate, Xcode shows the following error:
[Client] #Spi, Interrupted
GPS is enabled on the simulated device and the app has permission to access the GPS. I already tried to restart the simulator multiple times, selected another device, but no device works. Does anyone have a solution to this?
Regards
Xcode 10 is broken with respect to Location Services in my experience. I've had to go back to 9.4 to develop and debug apps, but even then I have had problems with running apps originally modified with Xcode 10 running in iOS 12.
Apple is having serious, SERIOUS quality control issues and legacy issues with each new release of Xcode and iOS. I'm very frustrated and annoyed.
I was having this issue and reseting the simulators seems to have fixed it for now:
$ xcrun simctl erase all
Simply click City Bicycle Run and then City Run in Debug -> Location in the Simulator over and over again until it works. At least it worked for me that way
I'm suffering the same issue with Xcode 10.1 and iOS 12. Several restarts of the App and toggling between different locations (None, Apple, City Bicycle Ride) make it work again.
Quite annoying
This worked intermittently as a workaround for me:
On the simulator debug menu, select location and freeway drive (or whatever you want) several times until it starts to track the location.
It also helps to build the app on the simulator again
Good luck!
Looks like the location simulator has not been fixed in Xcode 10.1 update.
In the simulator, go into device settings / Privacy / Location Services. Toggle Location Services off and then back on.
I just updated my xcode to work with ios7. Now whenever I make a new app, even if its set to build for ios7, I get an error in the simulator when running. It says that the install failed, even if I just made the project and haven't coded anything into it yet. The simulator also shows a black screen. I have tried the reset content, and it didn't work. I saw something somewhere saying to delete the Iphone Simulator folder in application support, but no such folder seems to exist. What can I try to do?
Update--
With some additional research, I found that Iphone Simultor is in the Xcode.app now, but I don't know what to delete. There are many files under the iPhone Simulator Folder. If I delete the actual app, it just doesnt open. Any ideas?? I dont even get an iphone on the screen, just a black window...
Update 2:
Even when I just go to open developer tools -> iphone simulator
it still gives me just a black screen....
Update 3
I just re-installed X-code, and all works now! Strange....I have no idea what happened...But I thought I would let y'all know for others who have similar issues.
Deleting the iOS Simulator folder of the iOS version in question in
/Users/xxx/Library/Application Support/iPhone Simulator
helps, but then you always have to repeat all the settings you made in the simulator (language, for example). Try to press the home button and then delete your app like you do it on a real iOS device. You should then be able to install it again.
This seems to be a known issue.
When simulator open - Go to iOS simulator tab -> reset content and settings..
Work for me.
Perhaps this answer will help?
The simulator should be in this folder:
/Developer/Platforms/iPhoneSimulator.platform/Developer/Applications/iOS Simulator.app
Make sure any #try and #catch(NSException *exception) {} blocks are not commented or are working properly.
This is a version mismatch between your OS X version and your Xcode (iOS simulator)
and it seems that you have upgraded your OS X so Xcode needs to be upgraded as well, Check the versions that match with each other.
You need to upgrade your Xcode which will upgrade iOS simulator.
Good Luck,
I have been running an app on my ipod that I've been developing for a while now and all of a sudden it won't run. I haven't changed xcode or macos; I've deleted the derived data folder; I've restarted the device, computer and xcode and cleaned.
The error I'm getting is: "could not start debugserver on MyDevice when trying to launch My.app"
My provisioning profile and device are green. I can't understand what I could possibly have changed.
Any ideas?
Thanks.
Restart Xcode and the device and you should be fine.
just CMD+shift+K, clean you project. when it's done, it should be work. at least for me.
Try deleting the installed application from your phone. That worked for me as none of the above methods did.
I had this issue while I was testing iOS beta. I updated iOS version on device and I had to restart xcode and then reconnect to
Restart xcode.
Unplug iPhone/iPad from usb cable (If connected with usb cable).
Turn off wifi and connect again (If you are using wifi debug).
Clean project.
Run your app again.
I upgraded my iPad device OS version recently to 5.1.1 (9B206). From that my Xcode is not detecting my device. Am just getting iOS Device and simulator options in my Xcode. But am getting my device in older version of Xcode and iTunes. For this i updated my MAC OS version to 10.7.4 and Xcode version to 4.3.3. But still am facing the same problem. Now how to make my Xcode to detect my device?
This Worked for me.
Quit Xcode.
Disconnect the device.
In a terminal window, type: sudo pkill usbmuxd (it will be restarted
again automatically)
Restart Xcode
Connect the device
Your device should now be visible again in Xcode!
Open the Organizer in Xcode, go to devices, find your device and click the option to use for development
I just plugged into another USB port and it detected by device.
In another case, check the "iOS Deployment Target" in "Build Settings",
if the target iOS version number is great than the version of device,
then the device will not show in the list.
Say that, the "iOS Deployment Target" == 7.0, and the version of device is 6.0,
to solve the problem by change the "iOS Deployment Target" to 6.0 or lower.
If the chosen answer still does not work for you try this:
Select the project in project explorer
Select the target on the main window
Select Build Settings
Select Deployment
Select iOS Deployment Target. Change it to the version of your device. (e.g. iOS 5.1)
I was also faced the same issue in Xcode, my device was not detected after update the Xcode latest version(7.3.1)
Done so many things what suggested in the web-search but still the device was not detected.
Finally, I just quit and open the Xcode my device was detected(oh my bad).
This SO answer solved it for me https://stackoverflow.com/a/56054170/5813473 .
sudo killall -STOP -c usbd
did the magic.
Well later I had to unplug/plug in again at occasions, but that 'killall' really solved the original issue.
Most recently, Xcode 8.3 and iOS 10.3 seems to have more security around Xcode accessing the iPad/iPhone. My sequence:
Rebooted the machine,
Attached the iPad,
Gone through a "trust this computer" security cycle on both iMac and iPad
Xcode can now see the device
Sometimes restarting Xcode helps. Give it a shot.
In my case, restarting Mac worked and no other solution.
I updated my iPad (it's in Settings -> General -> Software Update, near the top) and restarted my computer and Xcode sees it now.
FWIW I tried all the tips in this thread and nothing would work: from reboots, command line statements, unplugging, different USBC ports, etc. I also tried something not mentioned here (yet) by going to "Settings > General > Reset > Reset Location & Privacy" ... however even this didn't work.
Later on in the evening I was in a different room of the house and out of nowhere I got the "Trust This Computer" prompt on my iPad. I of course tapped "Trust" or whatever and then magically my Mac laptop finally sees my iPad.
I realize I'm not really giving a helpful tip/fix here - just sharing how things went for me in case anyone finds useful.
iPad: iOS 13.4.1 | Macbook laptop: OSX 12.3.1
Recently (2022) I've noticed that the iPad prompt to "Trust this Computer" won't appear unless using an Apple USB-C cable. Apple reps assure me they aren't doing any funny business here, but I have tried every cable I can find, including several thunderbolt 3 and 4 cables and Anker cables. Worth trying an Apple cable if still having problems.
Just simple, close the project on your XCode. Just right-click on the XCode in the taskbar and give a quit option. After open the XCode from the directory, it will detect your device. It also work on Xcode version 11.2.1
close your project or XCode.
Give Right click on the Xcode in MAC tabbar and give the Quit option.
Reopen the project from your finder(project place).
The device will be automatically detected.
Open the Windows in Xcode, go to devices. If Device is visible in Left side, Right click and select "Show in Destination Menu".
Enjoy..