I have Windows 7 and tried to use the 'make' command but 'make' is not recognized as an internal or external command.
I did Start -> cmd -> run -> make, which outputs:
'make' is not recognized as an internal or external command,operable program or batch file.
Then I typed 'mingw32-make' instead of 'make' (Start -> cmd -> run -> mingw32-make) and I get the same output:
'mingw32-make' is not recognized as an internal or external command,operable program or batch file.
What shall I do next in order to fix this problem?
In Windows10, I solved this issue by adding C:\MinGW\bin to Path and then called it using MinGW32-make not make.
Your problem is most likely that the shell does not know where to find your make program. If you want to use it from "anywhere", then you must do this, or else you will need to add the full path each time you want to call it, which is quite cumbersome. For instance:
"c:\program files\gnuwin32\bin\make.exe" option1=thisvalue option2=thatvalue
This is to be taken as an example, it used to look like something like this on XP, I can't say on W7. But gnuwin32 used to provide useful "linux-world" packages for Windows. Check details on your provider for make.
So to avoid entering the path, you can add the path to your PATH environment variable. You will find this easily.
To make sure it is registered by the OS, open a console (run cmd.exe) and entering $PATH should give you a list of default pathes. Check that the location of your make program is there.
This is an old question, but none of the answers here provide enough context for a beginner to choose which one to pick.
What is make?
make is a traditional Unix utility which reads a Makefile to decide what programs to run to reach a particular goal. Typically, that goal is to build a piece of software from a set of source files and libraries; but make is general enough to be used for various other tasks, too, like assembling a PDF from a collection of TeX source files, or retrieving the newest versions of each of a list of web pages.
Besides encapsulating the steps to reach an individual target, make reduces processing time by avoiding to re-execute steps which are already complete. It does this by comparing time stamps between dependencies; if A depends on B but A already exists and is newer than B, there is no need to make A. Of course, in order for this to work properly, the Makefile needs to document all such dependencies.
A: B
commands to produce A from B
Notice that the indentation needs to consist of a literal tab character. This is a common beginner mistake.
Common Versions of make
The original make was rather pedestrian. Its lineage continues to this day into BSD make, from which nmake is derived. Roughly speaking, this version provides the make functionality defined by POSIX, with a few minor enhancements and variations.
GNU make, by contrast, significantly extends the formalism, to the point where a GNU Makefile is unlikely to work with other versions (or occasionally even older versions of GNU make). There is a convention to call such files GNUmakefile instead of Makefile, but this convention is widely ignored, especially on platforms like Linux where GNU make is the de facto standard make.
Telltale signs that a Makefile uses GNU make conventions are the use of := instead of = for variable assignments (though this is not exclusively a GNU feature) and a plethora of functions like $(shell ...), $(foreach ...), $(patsubst ...) etc.
So Which Do I Need?
Well, it really depends on what you are hoping to accomplish.
If the software you are hoping to build has a vcproj file or similar, you probably want to use that instead, and not try to use make at all.
In the general case, MinGW make is a Windows port of GNU make for Windows, It should generally cope with any Makefile you throw at it.
If you know the software was written to use nmake and you already have it installed, or it is easy for you to obtain, maybe go with that.
You should understand that if the software was not written for, or explicitly ported to, Windows, it is unlikely to compile without significant modifications. In this scenario, getting make to run is the least of your problems, and you will need a good understanding of the differences between the original platform and Windows to have a chance of pulling it off yourself.
In some more detail, if the Makefile contains Unix commands like grep or curl or yacc then your system needs to have those commands installed, too. But quite apart from that, C or C++ (or more generally, source code in any language) which was written for a different platform might simply not work - at all, or as expected (which is often worse) - on Windows.
First make sure you have MinGW installed.
From MinGW installation manager check if you have the mingw32-make package installed.
Check if you have added the MinGW bin folder to your PATH. type PATH in your command line and look for the folder. Or on windows 10 go to Control Panel\System and Security\System --> Advanced system settings --> Environment Variables --> System Variables find Path variable, select, Edit and check if it is there. If not just add it!
As explained here, create a new file in any of your PATH folders. For example create mingwstartup.bat in the MinGW bin folder. write the line doskey make=mingw32-make.exe inside, save and close it.
open Registry Editor by running regedit. As explained here in HKEY_LOCAL_MACHINE or HKEY_CURRENT_USER go to \Software\Microsoft\Command Processor right click on the right panel New --> Expandable String Value and name it AutoRun. double click and enter the path to your .bat file as the Value data (e.g. "C:\MinGW\bin\mingwstartup.bat") the result should look like this:
now every time you open a new terminal make command will run the mingw32-make.exe. I hope it helps.
P.S. If you don't want to see the commands of the .bat file to be printed out to the terminal put #echo off at the top of the batch file.
If you already have MinGW installed in Windows 7, just simply do the following:
Make another copy of C:\MinGW\bin\mingw32-make.exe file in the same folder.
Rename the file name from mingw32-make.exe to make.exe.
Run make command again.
Tested working in my laptop for above steps.
For window-10 resolved error- make' is not recognized as an internal or external command.
Download MinGW - Minimalist GNU for Windows from here https://sourceforge.net/projects/mingw/
install it
While installation mark all basic setup packages like shown in image
Apply changes
After completion of installation
copy C:\MinGW\bin
paste in system variable
Open MyComputer properties and follow as shown in image
You may also need to install this
https://sourceforge.net/projects/gnuwin32/
As other answers already suggested, you must have MinGW installed. The additional part is to add the following two folders to the PATH environment variable.
C:\MinGW\bin
C:\MinGW\msys\1.0\bin
Obviously, adjust the path based on where you installed MinGW. Also, dont forget to open a new command line terminal.
'make' is a command for UNIX/Linux. Instead of it, use 'nmake' command in MS Windows. Or you'd better use an emulator like CYGWIN.
Search for make.exe using the search feature, when found, note down the absolute path to the file. You can do that by right-clicking on the filename in the search result and then properties, or open location folder (not sure of the exact wording, I'm not using an English locale).
When you open the command line console (cmd) instead of typing make, type the whole path and name, e.g. C:\Windows\System32\java (this is for java...).
Alternatively, if you don't want to provide the full path each time, then you have to possibilities:
make C:\Windows\System32\ the current working directory, using cd at cmd level.
add C:\Windows\System32\ to you PATH environment variable.
Refs:
use full path: http://technet.microsoft.com/en-us/magazine/ff678296.aspx
cd: http://technet.microsoft.com/en-us/library/cc731237.aspx
PATH: http://technet.microsoft.com/en-us/library/bb490963.aspx
I am using windows 8. I had the same problem. I added the path "C:\MinGW\bin" to system environment variable named 'path' then it worked. May be, you can try the same. Hope it'll help!
try download & run my bat code
======run 'cmd' as admin 2 use 'setx'=====
setx scoop "C:\Users%username%\scoop" /M
echo %scoop%
setx scoopApps "%scoop%\apps" /M
echo %scoopApps%
scoop install make
=======Phase 3: Create the makePath environment variable===
setx makePath "%scoopApps%/make" /M
echo %makePath%
setx makeBin "%makePath%/Bin" /M
echo %makeBin%
setx Path "%Path%;%makeBin%" /M
echo %Path%
use mingw32-make instead of cmake in windows
I have a project, which use a .rules file to build some non-c++ sources. How to make MSBuild print diagnostic output from this tool? -- Precisely cerr stream.
(I silently presume, the M$ team have not reached that level of insanity, to give the custom building tools functionality without possibility to print errors from them.)
I've actually noticed you marked question with label visual-studio-2008. I guess it means your custom build tool processes non cpp files in vc2008 project? If so, I think it is not built by msbuild but with vcbuild.
In this case try to add echo on in front of command executed by custom tool.
Vcbuild creates batch files in %temp% that first line contains #echo off and then it is executed. So if you add echo on you should see complete output in output window including command line used for command execution.
I realize this is going to be an exotic question, but I just can't find the answer.
I'm trying to fix up and enhance an old visual basic-based application.
My problem is: where is the output directory with the compiled binaries?
Thanks.
If some clarification is needed, please ask.
In the .VBP, if there is a line specifying the path like this
Path32="C:\"
Then the resulting EXE will be built at that location. Otherwise, it will be built in the same directory as the .VBP file. The path can be relational as well and may not be a fully qualified path.
I think you want the /outdir switch. This overrides the Path32 setting in the Project file.
VB6[.EXE] [[{/run | /r}] | [/runexit] | [{/make | /m}] projectname]
[/out filename] [/outdir path] [/d const=value{[:constN=valueN]}]
[/mdi | /sdi] [{/cmd argument | /c argument}]
Options:
/run or /r projectname Tells Visual Basic to compile projectname and run it,
using the arguments stored in the Command Line
Arguments field of the Make tab of the Project
Properties dialog box.
/runexit projectname Tells Visual Basic to compile projectname and run it.
Visual Basic will exit when the project returns to
design mode.
/make or /m projectname Tells Visual Basic to compile projectname and make an
executable file from it, using the existing settings
stored in the project file.
/out filename Specifies a file to receive errors when you build using
/m or /runexit. If you do not use /out, command line
bild errors are displayed in a message box.
/outdir path Specifies a directory path to place all output files in
when using /make. This path must already exist.
/d or /D const=value... Tells Visual Basic which values to use for conditional
compilation constants when making an .EXE or ActiveX
component with the /make switch. Separate multiple
constants with colons.
/cmd or /c argument Specifies a command string to be passed to the Command$
function. When used, it must be the last switch on the
command line.
/mdi or /sdi Changes the Visual Basic environment to either Single
Document Interface (SDI) or Multiple Document Interface
(MDI) mode. Visual Basic remains in this mode until
you change it.
/? Displays a list of valid command line switches.
You may use a group name in place of projectname in any of the above switches.
Works fine here.
There is no equivalent 'bin/lib' output directory for VB6. When you compile a VB6 project, the default is to compile to the same folder as the project (vbp file). It is also possible to compile to any other folder available to the user.
I am using VS2008, and developing C/C++ projects. I am using .bat file to build my projects from commandline (VC2k8 command prompt). I need a way to include preprossor directive dynamically at build time.
I am using devenv to build from command line.
>devenv my\project\path\myproject.sln /build release > logs\build.log
Actually I want to set a macro definition based on a command line parameter to the batch file. I can keep two different .vcproj files, but that gives problem in keeping multiple project/sln files.
My batch file would something like this...
if (condition)
#define MYPROC_ENABLE_MYMODULE "yes" // To be included in the project.
else
#define MYPROC_ENABLE_MYMODULE "no"
Any help would be really appreciated.
Thanks.
One option would be to set the CL environment variable, using something like:
set CL=/DMYPROC_ENABLE_MYMODULE
The C++ compiler (cl.exe) will add the contents of the CL environment variable to its command line when it runs.
I know you can define macros if you build using msbuild, but I'm not sure you can do the same when using devenv directly.
You can make different configurations for your solution and define different preprocessor flags for the different configurations. Then you would just need to select the configuration at the command line and no need for multiple solution or project files.
I use the MS compiler from the command line (VS 2008), and whenever it compiles one source file, it prints the compiled source file. Is there a way to avoid this useless print ?
There's no way to suppress that message with a switch (see also this thread).
It sounds like you're using the /E switch which prints the source to the std output after it's run through the preprocessor.