I have Windows 7 and tried to use the 'make' command but 'make' is not recognized as an internal or external command.
I did Start -> cmd -> run -> make, which outputs:
'make' is not recognized as an internal or external command,operable program or batch file.
Then I typed 'mingw32-make' instead of 'make' (Start -> cmd -> run -> mingw32-make) and I get the same output:
'mingw32-make' is not recognized as an internal or external command,operable program or batch file.
What shall I do next in order to fix this problem?
In Windows10, I solved this issue by adding C:\MinGW\bin to Path and then called it using MinGW32-make not make.
Your problem is most likely that the shell does not know where to find your make program. If you want to use it from "anywhere", then you must do this, or else you will need to add the full path each time you want to call it, which is quite cumbersome. For instance:
"c:\program files\gnuwin32\bin\make.exe" option1=thisvalue option2=thatvalue
This is to be taken as an example, it used to look like something like this on XP, I can't say on W7. But gnuwin32 used to provide useful "linux-world" packages for Windows. Check details on your provider for make.
So to avoid entering the path, you can add the path to your PATH environment variable. You will find this easily.
To make sure it is registered by the OS, open a console (run cmd.exe) and entering $PATH should give you a list of default pathes. Check that the location of your make program is there.
This is an old question, but none of the answers here provide enough context for a beginner to choose which one to pick.
What is make?
make is a traditional Unix utility which reads a Makefile to decide what programs to run to reach a particular goal. Typically, that goal is to build a piece of software from a set of source files and libraries; but make is general enough to be used for various other tasks, too, like assembling a PDF from a collection of TeX source files, or retrieving the newest versions of each of a list of web pages.
Besides encapsulating the steps to reach an individual target, make reduces processing time by avoiding to re-execute steps which are already complete. It does this by comparing time stamps between dependencies; if A depends on B but A already exists and is newer than B, there is no need to make A. Of course, in order for this to work properly, the Makefile needs to document all such dependencies.
A: B
commands to produce A from B
Notice that the indentation needs to consist of a literal tab character. This is a common beginner mistake.
Common Versions of make
The original make was rather pedestrian. Its lineage continues to this day into BSD make, from which nmake is derived. Roughly speaking, this version provides the make functionality defined by POSIX, with a few minor enhancements and variations.
GNU make, by contrast, significantly extends the formalism, to the point where a GNU Makefile is unlikely to work with other versions (or occasionally even older versions of GNU make). There is a convention to call such files GNUmakefile instead of Makefile, but this convention is widely ignored, especially on platforms like Linux where GNU make is the de facto standard make.
Telltale signs that a Makefile uses GNU make conventions are the use of := instead of = for variable assignments (though this is not exclusively a GNU feature) and a plethora of functions like $(shell ...), $(foreach ...), $(patsubst ...) etc.
So Which Do I Need?
Well, it really depends on what you are hoping to accomplish.
If the software you are hoping to build has a vcproj file or similar, you probably want to use that instead, and not try to use make at all.
In the general case, MinGW make is a Windows port of GNU make for Windows, It should generally cope with any Makefile you throw at it.
If you know the software was written to use nmake and you already have it installed, or it is easy for you to obtain, maybe go with that.
You should understand that if the software was not written for, or explicitly ported to, Windows, it is unlikely to compile without significant modifications. In this scenario, getting make to run is the least of your problems, and you will need a good understanding of the differences between the original platform and Windows to have a chance of pulling it off yourself.
In some more detail, if the Makefile contains Unix commands like grep or curl or yacc then your system needs to have those commands installed, too. But quite apart from that, C or C++ (or more generally, source code in any language) which was written for a different platform might simply not work - at all, or as expected (which is often worse) - on Windows.
First make sure you have MinGW installed.
From MinGW installation manager check if you have the mingw32-make package installed.
Check if you have added the MinGW bin folder to your PATH. type PATH in your command line and look for the folder. Or on windows 10 go to Control Panel\System and Security\System --> Advanced system settings --> Environment Variables --> System Variables find Path variable, select, Edit and check if it is there. If not just add it!
As explained here, create a new file in any of your PATH folders. For example create mingwstartup.bat in the MinGW bin folder. write the line doskey make=mingw32-make.exe inside, save and close it.
open Registry Editor by running regedit. As explained here in HKEY_LOCAL_MACHINE or HKEY_CURRENT_USER go to \Software\Microsoft\Command Processor right click on the right panel New --> Expandable String Value and name it AutoRun. double click and enter the path to your .bat file as the Value data (e.g. "C:\MinGW\bin\mingwstartup.bat") the result should look like this:
now every time you open a new terminal make command will run the mingw32-make.exe. I hope it helps.
P.S. If you don't want to see the commands of the .bat file to be printed out to the terminal put #echo off at the top of the batch file.
If you already have MinGW installed in Windows 7, just simply do the following:
Make another copy of C:\MinGW\bin\mingw32-make.exe file in the same folder.
Rename the file name from mingw32-make.exe to make.exe.
Run make command again.
Tested working in my laptop for above steps.
For window-10 resolved error- make' is not recognized as an internal or external command.
Download MinGW - Minimalist GNU for Windows from here https://sourceforge.net/projects/mingw/
install it
While installation mark all basic setup packages like shown in image
Apply changes
After completion of installation
copy C:\MinGW\bin
paste in system variable
Open MyComputer properties and follow as shown in image
You may also need to install this
https://sourceforge.net/projects/gnuwin32/
As other answers already suggested, you must have MinGW installed. The additional part is to add the following two folders to the PATH environment variable.
C:\MinGW\bin
C:\MinGW\msys\1.0\bin
Obviously, adjust the path based on where you installed MinGW. Also, dont forget to open a new command line terminal.
'make' is a command for UNIX/Linux. Instead of it, use 'nmake' command in MS Windows. Or you'd better use an emulator like CYGWIN.
Search for make.exe using the search feature, when found, note down the absolute path to the file. You can do that by right-clicking on the filename in the search result and then properties, or open location folder (not sure of the exact wording, I'm not using an English locale).
When you open the command line console (cmd) instead of typing make, type the whole path and name, e.g. C:\Windows\System32\java (this is for java...).
Alternatively, if you don't want to provide the full path each time, then you have to possibilities:
make C:\Windows\System32\ the current working directory, using cd at cmd level.
add C:\Windows\System32\ to you PATH environment variable.
Refs:
use full path: http://technet.microsoft.com/en-us/magazine/ff678296.aspx
cd: http://technet.microsoft.com/en-us/library/cc731237.aspx
PATH: http://technet.microsoft.com/en-us/library/bb490963.aspx
I am using windows 8. I had the same problem. I added the path "C:\MinGW\bin" to system environment variable named 'path' then it worked. May be, you can try the same. Hope it'll help!
try download & run my bat code
======run 'cmd' as admin 2 use 'setx'=====
setx scoop "C:\Users%username%\scoop" /M
echo %scoop%
setx scoopApps "%scoop%\apps" /M
echo %scoopApps%
scoop install make
=======Phase 3: Create the makePath environment variable===
setx makePath "%scoopApps%/make" /M
echo %makePath%
setx makeBin "%makePath%/Bin" /M
echo %makeBin%
setx Path "%Path%;%makeBin%" /M
echo %Path%
use mingw32-make instead of cmake in windows
Related
I downloaded and installed the program "cppcheck" (http://cppcheck.sourceforge.net/).
This program has both a GUI (which I can access without problems) and a command line interface.
However, when I go to the windows command prompt and type "where cppcheck", nothing can be found.
Am I crazy? Or is the command line interface for cppcheck only accessible on Unix systems?
Since I usually don't work with Windows, I didn't realise that the "where" command just looks in the current folder and child folders of the current folder. That's why I didn't get any results.
You have to add it in the environment variables since the cppcheck installer does not add it automatically. This way you can use the where command from any folder as it also checks the environment variables too.
I want to set an alias to my installation of firefox so I can easily start a web page, the problem is that I dont want the script to be system dependent.
Namely I want it to be able to run on a linux distribution where the command to start firefox is already mapped to 'firefox' and can easily be run that way through bash, but on my windows machine I cant seem to get it to assign to the same variable.
I saw that I could set it to '%firefox%' via the set command but that's not quite what I want.
I believe creating aliases is possible on a windows environment because the version of svn that I use auto-installed and was able to assign itself to 'svn'. Anyone know what was involved in them being able to get their alias working, or a similar way to alias a command?
If you include your Firefox path in the %PATH% environment variable, you can start FF with "firefox". Under Windows, you should edit the system-wide settings (see this link).
AFAIK, there is nothing similar to aliases under DOS/Windows (except the %firefox% way you mentioned, too). The 'svn' command you talked about most likely is the same thing, a 'svn.exe' and its path included to %PATH%.
This is a bit restrictive, as you can only use the original filename to launch a program, but you can work around this by creating a batch file in the program's path that launches the program, f.e. a FF.BAT that contains "firefox %1".
Alternatively, you can place a batch file in a path that already is in %PATH%, f.e. the Windows directory. That way, you don't have to modify %PATH%.
I have a small problem with make and mingw. I usually use Linux and I am not really familiar with windows way of doing.
C:\MingGW\bin is in my path (I can launch directly g++ or sh by the windows command line) but when I try to type make I have the following error :
make: g++: command not found
I do not know which make is use (no make in C:\MinGw\bin) and I do not know the equivalent of which in windows. Do I have forgotten an essential step ?
Thanks for your help.
Try mingw32-make instead.
Use this command to find out which one you're running:
for %i in (make.exe) do #echo. %~$PATH:i
It's basically the equivalent of which for Windows, assuming you know the extension. If you want a script that will check all extensions, you can find it here.
As pointed out in a comment by Chris, latter versions of Windows (Vista, 2003 Server, and Win7, I think) actually have a real equivalent called where, which may be better. Those of us still stuck back on XP can use the command above (or the big script at the other end of that link).
Are you sure there is no make ? Once do "where make" to confirm this and check the entries you get under C:\mingW\bin. Hopefully you will get a entry mingw-32-make.exe or something like that.
All you need to do is rename (better create a copy and rename) this exe as make.exe and if you have already added the environment variable of this path then you may now be able to issue make command happily under mingw.
The same is already done for g++,gcc, etc. They might have conveniently left make the way it is. Hope this helps
I have installed ActivePerl on my Windows OS. I have followed below URL
procedure to install
ActivePerl Installation
After having done that, I have tried to run "perl -v " on the command line. But it reports the following error.
The system cannot execute the
specified program
What do I need to do to solve these issues?
I was facing a similar issue... but the thing was that I could execute the file by right clicking the file and opening it with perl command line interpreter.... but still the perl-v command would give the error... all I had to do was execute this command
set PATH=C:\Perl\bin;%PATH%
This solved the issue...
You need to make sure the directory where the Perl executable lives (it might be C:\perl\bin, but basically wherever you told ActiveState Perl to be installed) is in your PATH environmental variable (you can find the variable value by typing set PATH command on command line prompt in Windows).
If you're not sure where you installed Perl to (and can't find it in the default C:\perl\bin), you can find the directory by going to Start menu, finding ActiveState Perl folder, and right-clicking on "Perl Package Manager" icon, then pick "Properties" from the right-click menu. Properties window (in the "Shortcut" tab) will have a "Target" line showing the directory.
I was getting a similar error after installing ActiveState Perl on Windows 8 x64 bit edition and trying to invoke 'perl' at the command line.
'perl' is not recognized as an internal or external command, operable
program or batch file.
I remember selecting the option during installation to add the Perl directory to the system PATH environment, and after checking the system properties, it was indeed showing in the system PATH.
I tried installing 'Microsoft Visual C++ 2008 x86 and x64 redistributable setup' files as suggested by a few places but it still did not resolve the issue, until I tried some of the suggestions in this thread.
At the command prompt I entered:
set PATH
And surprisingly it did not list the Perl directories as being included in the PATH variables.
So to remedy that I entered this into the command prompt and hit enter:
set PATH=C:\Perl64\bin;C:\Perl64\site\bin;%PATH%
(The directory paths are for the 64 bit edition of Perl, adjust according to your installation) the %PATH% portion is important and ensures your existing settings are kept and not wiped out and overwritten when you set the PATH.
That fixed it and entering 'perl -v' into command prompt successfully replies your Perl version. If you had a PowerShell window open before setting the PATH variable, you will need to close it and re-open another instance of PowerShell.
I believe the original underlying issue was something to do with different PATH variables for 32-bit and 64-bit environments and possibly some internal Windows redirection that takes place automatically.
This doesn't sound like a problem with PATH - I would expect it to give the message 'perl' is not recognized as an internal or external command, operable program or batch file.
I have not seen this error message, but http://nirlevy.blogspot.com/2008/03/system-cannot-execute-specified-program.html makes some suggestion for related programs.
Or maybe ask on an Active State forum.
I had the same error. I was able to solve it by changing the order of the Perl64 entries in the PATH variable in the Environment Variables. I moved the C:\Perl64\bin to be before C:\Perl64\site\bin and it worked.
I had a similar error which was solved by adding the .pl extension to the script name, which I had forgotten to do.
I could not get it to work otherwise even with my Perl's location (C:\Apps\Perl\bin) verified as in %PATH%.
The problem lies in the installation directory.
The Perl PATH variable will be set to C:\Program Files\perl (depends on 32 or 64 bit of course), BUT, the default installation directory is C:\perl. This is kind of sneaky actually as you would assume the installer would be more intelligent about this, but it sets the environment variable to that directory no matter WHERE you install the damned thing.
My basic problem is that if I run GCC from the windows command line (cmd.exe in Windows XP) and it does nothing: no .o files are created, no error messages, nothing. It will only throw an error message if I use DOS-style paths, but nothing else. When I run from the Cygwin shell then it will throws error messages as appropriate for the errors in the source and produces the .o files as it needs. Using 'make' from the DOS command line doesn't work either. Has anyone encountered this behavior before?
I've actually made some progress on this. Background:
I have WinAVR installed and its bin directories set in my PATH. WinAVR is GCC and associated development utilities but for the AVR 8-bit microcontroller. It shares many utility names with regular GCC.
In the past I remember Cygwin putting its bin directories in the PATH. It didn't seem to do this this time, so I put 'C:\cygwin\bin' into the PATH and then later 'C:\cygwin\usr\bin' there as well.
The latest release of Cygwin has issues with the way it handles files. Basically, gcc.exe is not an executable, but a type of symlink to the actual executable (which is either gcc-3.exe or gcc-4.exe depending on what you have installed). In the BASH shell these symlinks are easily resolved, in cmd.exe they are not. This means that if you attempt to enter 'gcc' into cmd.exe as a command it will respond 'Access is denied'. The solution for that is to call the actual GCC file name (gcc-4) instead of the symlink.
The solution seems to have come by rearranging my PATH. To edit the PATH environment variable, right click on 'My Computer' and go to properties, then Advanced and then Environment Variables. Under 'System Variables' find 'Path' and double click it to edit. Remove all entries that have C:\cygwin in them and then go to the FRONT of the PATH and enter them there. For me it was C:\cygwin\bin and C:\cygwin\usr\bin. The important part for me was making sure that the Cygwin entries were before the WinAVR entries. I noticed that when I tried to call 'make' in cmd.exe it was calling the WinAVR version instead of the Cygwin version. This lead me to rearrange my path and after some fooling around it became clear that using gcc-4 from the cmd.exe shell was working. It then worked in Code::Blocks as well and I was off.
Alternatively, it might have just fixed itself from something else entirely. Computers have a way of doing that.
Alternatively you can delete file: gcc.exe which is a file link and rename
the actual gcc executable file: gcc-3.exe (or gcc-4.exe depends on your version) to gcc.exe