What can be the best way to aggregate messages from many different sources (actually queues/topics) into a single queue/topic and then consume it. I am trying to design an application to receive messages from different topics in JMS using weblogic.
You could write your own "aggregator" as a stand-alone Java application:
For each queue/topic have a reader in its own thread.
Each reader sends its received message again on a "aggregate queue".
Have another thread to listen on the "aggregate queue".
As a variation, you could use a JVM Queue (like java.util.concurrent.ArrayBlockingQueue) as the "aggregate queue". This is faster, does not require another MQ queue, does not need network bandwidth, but it's not persistent.
Another idea is to use a "Message driven bean (MDB)" for each incoming queue/topic:
Again, each of these MDBs just reads the message and resends it to the "aggregate queue".
Have another MDB listening on the "aggregate queue".
A few suggestions on quality requirements. I belive you have to consider them.
They will be highly relate with your technical solution.
is that message loss acceptable?
client ack could be considered.
e.g. A memory queue sit in middle, e.g. incoming queue1...n -> ArrayBlockingQueue in memory -> outgoing queue. The data in the ArrayBlockingQueue , will lost when app crash.
is that message duplicate acceptable for the single outgoing queue?
I would suggest yes.
Set applicable level PossibleDuplicateFlag to make the client aware of that.
how fast the incoming messages per second on the diff incoming queue?
one queue session has only a uniqe thread. Performance has to be considered in advance.
Related
I have ActiveMQ Artemis. Producer generates 1000 messages and consumer one by one processing their. Now I want to process this queue with help of two consumers. I start new consumer and new messages are distributed between two runned consumers. My question: is it posible redistribute old messages between all started consumers?
Once messages are dispatched by the broker to a consumer then the broker can't simply recall them as the consumer may be processing them. It's up to the consumer to cancel the messages back to the queue (e.g. by closing its connection/session).
My recommendation would be to tune your consumerWindowSize (set on the client's URL) so that a suitable number of messages are dispatched to your consumers. The default consumerWindowSize is 1M (1024 * 1024 bytes). A smaller consumerWindowSize would mean that more clients would be able to receive messages concurrently, but it would also mean that clients would need to conduct more network round-trips to tell the broker to dispatch more messages when they run low. You'll need to run benchmarks to find the right consumerWindowSize value for your use-case and performance needs.
We have an IBM MQ JMS queue and want to distribute the data into multiple consumers for load balancing. So if we write two JMS Clients to consume from same JMS queue what will happen? Will Messages be equally distributed across both consumers since one consumer will delete the data after it is read? Is there a possibility for data duplication, like if the same message is read by both consumers in a race condition?
My comments below are based on destructive get and not a browse get.
So if we write two JMS Clients to consume from same JMS queue what
will happen?
They will both consume messages.
Will Messages be equally distributed across both consumers since one
consumer will delete the data after it is read?
No. The "hot" consumer will be feed the next available message, assuming it is "getting" a message again before the next message arrives.
Is there a possibility for data duplication, like if the same message
is read by both consumers in a race condition?
Not if you are performing a destructive get (the default).
I have implemented the example from the RabbitMQ website:
RabbitMQ Example
I have expanded it to have an application with a button to send a message.
Now I started two consumer on two different computers.
When I send the message the first message is sent to computer1, then the second message is sent to computer2, the thrid to computer1 and so on.
Why is this, and how can I change the behavior to send each message to each consumer?
Why is this
As noted by Yazan, messages are consumed from a single queue in a round-robin manner. The behavior your are seeing is by design, making it easy to scale up the number of consumers for a given queue.
how can I change the behavior to send each message to each consumer?
To have each consumer receive the same message, you need to create a queue for each consumer and deliver the same message to each queue.
The easiest way to do this is to use a fanout exchange. This will send every message to every queue that is bound to the exchange, completely ignoring the routing key.
If you need more control over the routing, you can use a topic or direct exchange and manage the routing keys.
Whatever type of exchange you choose, though, you will need to have a queue per consumer and have each message routed to each queue.
you can't it's controlled by the server check Round-robin dispatching section
It decides which consumer turn is. i'm not sure if there is a set of algorithms you can pick from, but at the end server will control this (i think round robin algorithm is default)
unless you want to use routing keys and exchanges
I would see this more as a design question. Ideally, producers should create the exchanges and the consumers create the queues and each consumer can create its own queue and hook it up to an exchange. This makes sure every consumer gets its message with its private queue.
What youre doing is essentially 'worker queues' model which is used to distribute tasks among worker nodes. Since each task needs to be performed only once, the message is sent to only one node. If you want to send a message to all the nodes, you need a different model called 'pub-sub' where each message is broadcasted to all the subscribers. The following link shows a simple pub-sub tutorial
https://www.rabbitmq.com/tutorials/tutorial-three-python.html
I was wondering what is the difference between a JMS Queue and JMS Topic.
ActiveMQ page says
Topics
In JMS a Topic implements publish and subscribe semantics. When you publish a message it goes to all the subscribers who are
interested - so zero to many subscribers will receive a copy of the
message. Only subscribers who had an active subscription at the time
the broker receives the message will get a copy of the message.
Queues
A JMS Queue implements load balancer semantics. A single message will be received by exactly one consumer. If there are no
consumers available at the time the message is sent it will be kept
until a consumer is available that can process the message. If a
consumer receives a message and does not acknowledge it before closing
then the message will be redelivered to another consumer. A queue can
have many consumers with messages load balanced across the available
consumers.
I want to have 'something' what will send a copy of the message to each subscriber in the same sequence as that in which the message was received by the ActiveMQ broker.
Any thoughts?
That means a topic is appropriate. A queue means a message goes to one and only one possible subscriber. A topic goes to each and every subscriber.
It is simple as that:
Queues = Insert > Withdraw (send to single subscriber) 1:1
Topics = Insert > Broadcast (send to all subscribers) 1:n
Topics are for the publisher-subscriber model, while queues are for point-to-point.
A JMS topic is the type of destination in a 1-to-many model of distribution.
The same published message is received by all consuming subscribers. You can also call this the 'broadcast' model. You can think of a topic as the equivalent of a Subject in an Observer design pattern for distributed computing. Some JMS providers efficiently choose to implement this as UDP instead of TCP. For topic's the message delivery is 'fire-and-forget' - if no one listens, the message just disappears. If that's not what you want, you can use 'durable subscriptions'.
A JMS queue is a 1-to-1 destination of messages. The message is received by only one of the consuming receivers (please note: consistently using subscribers for 'topic client's and receivers for queue client's avoids confusion). Messages sent to a queue are stored on disk or memory until someone picks it up or it expires. So queues (and durable subscriptions) need some active storage management, you need to think about slow consumers.
In most environments, I would argue, topics are the better choice because you can always add additional components without having to change the architecture. Added components could be monitoring, logging, analytics, etc.
You never know at the beginning of the project what the requirements will be like in 1 year, 5 years, 10 years. Change is inevitable, embrace it :-)
Queues
Pros
Simple messaging pattern with a transparent communication flow
Messages can be recovered by putting them back on the queue
Cons
Only one consumer can get the message
Implies a coupling between producer and consumer as it’s an one-to-one relation
Topics
Pros
Multiple consumers can get a message
Decoupling between producer and consumers (publish-and-subscribe pattern)
Cons
More complicated communication flow
A message cannot be recovered for a single listener
As for the order preservation, see this ActiveMQ page. In short: order is preserved for single consumers, but with multiple consumers order of delivery is not guaranteed.
If you have N consumers then:
JMS Topics deliver messages to N of N
JMS Queues deliver messages to 1 of N
You said you are "looking to have a 'thing' that will send a copy of the message to each subscriber in the same sequence as that in which the message was received by the ActiveMQ broker."
So you want to use a Topic in order that all N subscribers get a copy of the message.
TOPIC:: topic is one to many communication... (multipoint or publish/subscribe)
EX:-imagine a publisher publishes the movie in the youtub then all its subscribers will gets notification....
QUEVE::queve is one-to-one communication ...
Ex:-When publish a request for recharge it will go to only one qreciever ...
always remember if request goto all qreceivers then multiple recharge happened so while developing analyze which is fit for a application
Queue is JMS managed object used for holding messages waiting for subscribers to consume. When all subscribers consumed the message , message will be removed from queue.
Topic is that all subscribers to a topic receive the same message when the message is published.
I have a MDB which listens to WebSphere MQ. It does not picks up the messages in the order that has been received by the Queue. How can i make it read it in that order? Is it possible? Should i not use a MDB.
In general, WMQ delivers messages in the order that they were received. However, several things can impact that...
If the queue is set to priority instead of FIFO delivery and messages arrive in different priorities, they will be delivered "out of order".
Distinguish between order produced and order delivered. If the messages are produced on a remote QMgr and there are multiple paths to the local QMgr, messages may arrive out of order.
Difference in persistence - if messages are produced on a remote QMgr and are of different persistences, the non-persistent messages may arrive faster than the persistent ones, especially with channel NPMSPEED(FAST) set.
Multiple readers/writers - Any dependency on sequence implies a single producer sending to a single consumer over a single path. Any redundancy in producers, consumers or paths between them can result in messages delivered out of sequence.
Syncpoint - To preserve sequence, ALL messages must be written and consumed under syncpoint or else ALL must be written and consumed outside of syncpoint.
Selectors - These specifically are intended to deliver messages out of order with respect to the context of all messages in the queue.
Message groups - Retrieval of grouped messages typically waits until the entire group is present. If groups are interleaved, messages are delivered out of sequence.
DLQ - if the target queue fills, messages may be delivered to the DLQ. As the target queue is drained, messages start going back there. With a queue near capacity, messages can alternate between the target queue and DLQ.
So when an MDB is receiving messages out of order any of these things, or even several of them in combination, may be at cause. Either eliminate the dependency on message sequence (best choice) or else go back over the design and reconcile all the factors that may lead to out-of-sequence processing.
To add to T.Rob's list, MDBs use the application server WorkManager to schedule message delivery, so message order is also dependent on the order in which the WorkManager starts Work items. This is outside the control of WMQ. If you limit the MDB ServerSessionPool depth to one, then this limit is removed as there will only ever be one in-flight Work instance, but at the cost of reducing maximum throughput.
If you're running in WebSphere application server, then non-ASF mode with ListenerPorts can preserve message order subject to some transactional/backout caveats. There's a support technote here:
http://www-01.ibm.com/support/docview.wss?uid=swg21446463