I cannot figure out a way to publish a web project in Visual Studio 2015 CTP using web deploy or FTP. In the Publish wizard, there are only options for Azure, Import and File System. In Visual Studio 2013, there is a Custom option where you can specify the connection settings and choose between Web Deploy, Web Deploy Package, FTP and Filesystem.
I tried moving over the publish profile from my Visual Studio 2013 project by putting it in the Properties-->PublishProfiles folder, and then it behaved like Visual Studio 2013, but would not publish (failed to connect to remote host) with the same settings that publish fine in 2013.
Any ideas?
It sounds like Web Deploy 3.6 beta supports the new content models in ASP.NET 5 (ASP.NET vNext) and I guess that the VS 2015 Web-Deploy client doesn't support it yet. (28 April 2015)
This blog post gives some command-line options for using a publish profile. I'm in a new environment that isn't set up for web-deploy yet, so I haven't tried it myself. (I did a file-system publish to test against my local IIS.)
I also experienced the same issue. It seems that, at the time of writing, the FTP publish target isn’t available yet: I guess that’s most likely because the Web Development Tools are still in release candidate / preview phase, so the GUI still has some missing features.
Luckily enough the issue can be easily solved with the following workaround.
If you don't see the FTP option, choose File System instead and go ahead. When prompted for a Target Location, insert the FTP Server URL and go ahead.
The remaining steps won’t change, so you can complete the wizard that will be saved into a ProfileName.pubxml file.
Once done, open that file and apply the following changes:
Locate the <WebPublishMethod> element and change its value from FileSystem to FTP.
Locate the <UsePowerShell> element and entirely remove it.
Right after doing that, right-click to the project’s root node, select Publish and re-open your Publish Profile via the Publish Profile Wizard in edit mode: all the FTP options (Server, Site Path, Passive Mode, Username, Password) will now be available.
I am using Team Foundation Server with VS 2010. I am facing a problem that when i am mapping a new folder to download the code from TFS, after download all the code, all files/folder in new folder get automatically read only attribute and i have to remove this attribute explicitly after it i am able to build the solution other wise it is giving me "Access denied" error. Is there any TFS setting which is making my project files as read only.
Not with TFS 2010, this is called "Local Workspaces" and is available from TFS 2012 onwards and works like Subversion.
What you are doing, by removing the Read Only flag, is fighting TFS. What you should do is perform a Checkout on the file before editing. If you are using Visual Studio to edit solutions/projects this will happen automatically providing you have your Solution and Project bindings setup. If you are editing files outside of Visual Studio, you can perform a checkout by:
Using Source Control Explorer in Visual Studio.
Using the Team Foundation Server Power Toys to install a Shell Extension into Windows so you can Right click.
Opening the file in Visual Studio and using it as a text editor.
Using the tf checkout command line.
By removing the read only flag, you are allowing yourself to edit the file, but not instructing TFS that you have changed it, so TFS won't know to check it in when the time comes. TFS doesn't scan you workspace for changes like Subversion.
I have a problem debugging a project migrated from Visual Studio 2010 to 2012. Every time I go to debug it I get the error message:
"Error HRESULT E_FAIL has been returned from a call to a COM component".
Compiling and running the application in a local IIS server works fine - just cannot debug.
The other change other than moving to VS2012 is I am now using Team Foundation Server for source control and issue tracking - but I cannot see how that would affect it.
I can narrow it down to the following
The project file - it has been migrated from VS 2003 as a website project and has been chopped and changed up the different versions
Crystal Report runtime library/ some other library
Anyone with any ideas?
I had the same problem with a c++ project in Visual Studio 2019.
The following solution worked for me:
Close Visual Studio.
Go to the project's root folder and delete the .vs directory.
Start Visual Studio and open the solution.
The build should now work.
I have been getting this a lot lately. I've been having to create a new file and move the code to the new file to get around it.
I fixed it by deleting the solution's suo file (as far as I can tell, it just stores info like what files are open in the IDE and stuff, and deleting it does no real damage).
My file was seemingly corrupt. (The IDE wouldn't remember what files were open when restarting. It was 1.7MB in size, which seems large, even for my 40 project solution, which rarely has more than 50 files open at once.)
Edit: I just recently had to do this in VS2017 but for another reason, it was taking longer to build and took 5+ minutes to stop a debug session, deleting that pesky suo file fixed it right up, now anytime VS acts weird deleting SUO is my first port of call.
I removed the csproj.user files and it worked for me.
In some other cases, to fix this error, I go to Web tab in the project properties and check "Use Visual Studio Development Server" and "Auto-assign Port". After that I need to rebuild the project and restart VS
This solved my problem:
Start —> Run —> regsvr32 %SystemRoot%\System32\msxml3.dll
Start —> Run —> regsvr32 %SystemRoot%\SysWOW64\msxml3.dll
Before this I tried the above solution from Simon, but didn't work for me!
Perhaps combining these two solutions did the job!
Sorry to revive a dead thread but i solved this on VS2017 by deleting the project template cache and item template cache folders in
%localappdata%\Microsoft\VisualStudio\[BUILD]
Then resetting the visual studio settings via
Tools>Import and export settings>reset all settings
Also ive heard turning off "Lightweight solution load for all projects" can help.
Doh! In case anyone else gets this error when trying to attach to an IIS Website.
Triple check that your hostname is correct, I had forgotten a '/' in (e.g.) http://my.testsite.com
Try this before re-installing Visual Studio like I did.. Terrible error message..
I wanted to add that I encountered this error when opening designer file in WinForms app. My issue was that one of the references in the project was referencing itself. Apparently this can happen as mentioned here
https://social.msdn.microsoft.com/Forums/office/en-US/00aede04-d8cd-4475-8114-4b4792261052/winforms-designer-error-hresult-efail-has-been-returned-from-a-call-to-a-com-component
I removed the reference and it is working fine.
Maybe this page helps:
Scenario Two:
The Microsoft Visual Studio 2010 IDE crashes while creating OR debugging a web application project.
This above error occurs because of corrupted Cache of Visual Studio 2010. In order to resolve the issue just delete the project Cache from the below location:
C:\Program Files\Microsoft Visual Studio 10.0\Common7\IDE\ProjectTemplatesCache
C:\Program Files(x86)\Microsoft Visual Studio 10.0\Common7\IDE\ProjectTemplatesCache
Then run devenv.exe /setup to re-build the cache.
I tried all of the above solutions none work for me, I found the solution here
Open ActivityLog.xml by going into
C:\Users\{UserName}\AppData\Roaming\Microsoft\VisualStudio\15.{Id}
Check if error states that
"CreateInstance failed for package
[ReferenceManagerPackage]Source: 'mscorlib' Description: Could not load type
'Microsoft.VisualStudio.Shell.Interop.' from assembly
'Microsoft.VisualStudio.Shell.Interop.11.0'
Then run this gacutil command through VS Cmd prompt (admin mode):
Navigate to
C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\Common7\IDE\PublicAssemblies
Run gacutil -i Microsoft.VisualStudio.Shell.Interop.11.0.dll
It seems that to bring up the Add Reference dialog in Visual Studio 2017 the Microsoft.VisualStudio.Shell.Interop.11.0.dll needs to be regsitered in the GAC. You can follow these steps to register this assembly in the GAC:
Open the Develop Command Prompt for VS2017 (ensure you run the as administrator otherwise the GAC registration may fail)
Change the current directory to the PublicAssemblies folder for your Visual Studio 2017 installation. Mine was:
C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\Common7\IDE\PublicAssemblies
Run the following command to register the assembly in the GAC:
gacutil -i Microsoft.VisualStudio.Shell.Interop.11.0.dll
C:\Program Files (x86)\Microsoft Visual Studio\2017\Community\Common7\IDE\PublicAssemblies>gacutil -i Microsoft.VisualStudio.Shell.Interop.11.0.dll
Microsoft (R) .NET Global Assembly Cache Utility. Version 4.0.30319.0
Copyright (c) Microsoft Corporation. All rights reserved.
Assembly successfully added to the cache
Now restart VS2017 and try to add a reference to your project again and you should see the Add Reference dialog appear.
For more clarification please follow below link
https://camerondwyer.com/2017/05/03/how-to-fix-the-operation-could-not-be-completed-error-adding-reference-to-visual-studio-2017/#more-2286
I found the solution below on https://developercommunity.visualstudio.com/content/problem/260196/add-a-reference-raise-error-error-hresult-e-fail-h.html address.
It worked for me in VS 2019:
1 Open "Developer Command Prompt for VS 2017" as Admin
2 CD into "C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\Common7\IDE\PublicAssemblies"
3 Run "gacutil -i Microsoft.VisualStudio.Shell.Interop.11.0.dll"
After a restart, it all worked well.
I had the same issue after an upgrade from VS2013 to VS2015.
The project I was working at referenced itself. While VS2013 didn't care, VS2015 didn't like that and I got that error. After deleting the reference, the error was gone. It took me around 4 hours to find that out...
Just delete packages folder.That helped me
Root Cause:
Microsoft.VisualStudio.Shell.Interop.11.0.dll is missing from GAC.
Solution:
1. Go to start menu and Open Command Prompt for Visual Studio
2. Enter command gacutil -i Microsoft.VisualStudio.Shell.Interop.11.0.dll
3. If in case your system unable to find this dll file then you may download it from Nuget package manager and then can provide the path of dll
All set! hit enter and you're done!
In my case, it seems it was because I stashed some files, but some related windows remained open.
Closing all windows and rebuilding solution fixed it for me.
I wrote a simple program to open different folder while clicking on some specific buttons. I made the file properties as "content" and "copy if newer" to make deployment. So if I installed the exe file in the other software it actually install all of its resources and run the program fine.
So, this is all about my program. While developing this sometimes if I run the program to check, it showed the error
"HRESULT E_FAIL has been returned from a call to a COM component"
and I could not open the designer view. But Somehow I got an easy solution for me. I am not sure whether it will work for other or not.
Here is the solution:
Copy the whole application folder to another location. click on the application file from there.
it will not work since it is just a copy and you will not see the designer
From the solution explorer delete the form1.vb ( or may be a different name if it was changed during developing)
In the solution explorer>right click>add an existing item> browse the file Form1.vb from where the folder is copied ( orginal location)
run the program in the new location. It will work
The problem with this solution if you want to add something and after running the program you find the same error, you have to copy the whole application folder in another location again and follow the above steps
Not sure about the exact reproduction steps for the error (HRESULT E_FAIL has been returned from a call to a COM component), but the solution for me was:
Close Visual Studio and Repair it through Control Panel.
Restart system
After the restart, the error was gone.
The error occurred for me after I installed the latest Windows 10 SDK. I was getting the error while building a C++ project using SDK 8.1. In Project properties, I switch to latest 10 SDK. rebuild. That worked. Changed back to 8.1. Rebuild. No error.
Steps to resolve the issue:
1.Open your solution/Web Application in VS 2012 in administrator mode.
2.Go to IIS and Note down the settings for your application (e.g.Virtual directory name, Physical Path, Authentication setting and App pool used).
3.Remove (right click and select Remove) your application from Default Web Site. Refresh IIS.
4.Go back to VS 2012 and open settings (right click and select properties) for your web application.
5.Select Web.In Servers section make sure you have selected "Use Local IIS Web Server".
6.In Project Url textbox enter your application path (http://localhost/Application Path). Click on Create Virtual Directory.
7.Go to IIS and apply settings noted in step 2. Refresh IIS.
8.Go to VS 2012 and set this project as startup Project with appropriate page as startup page.
9.Click run button to start project in debug mode.
This resolved issue for me for web application which was migrated from VS 2010 to 2012.Hope this helps anyone looking for specific issue.
My machine configuration is:
IIS 7.5.7600.16385
VS 2012 Professional
Windows 7 Enterprise (Version 6.1 - Build 7601:Service Pack 1)
This happens in our TFS build server some times (Gated check in). It is about workspace folder. I don't know why but workspace folder access sometimes corrupt. What I am doing to fix issue is deleting TFS build workspaces and deleting relevant workspace folders. TFS build machine then create new workspaces for itself and problem is fixed.
Tousif Ahmed's solution should work for local builds. Copy application folder to another place should do the same thing what I am doing in TFS build machine.
In my case, it appears that this message can be issued by Intellisense in Visual Studio 2013. The screenshot below shows the error at the bottom of VisualStudio 2013 after the first load of a customer project.
I started googling what causes this error, and decided to try deleteing the user.vxproj files as mentioned above. I found however that the project built with no issues, then after exiting and re-loading the project, I no longer received the error. So I'm assuming in my case, it was some corruption due to moving the project from the customers directory tree structure to my local development disk tree structure. The key here is that in my case, the problem was transient. I did NOTHING and the problem appeared to resolve itself. (Not generally a desirable thing as I didn't fix anything so it might come back).
I recently spent about 3 hours trying to fix this issue on my ASP.NET app running on local IIS. I had 'Override application root URL' specified and I specified the url with an ending forward slash (/) such as http://my.dev.com/. If I saved the project options and came back in it would show the overrided root url as http://http://my.dev.com. Once I removed the last forward slash it started to behave ok and the error went away.
HRESULT E_FAIL has been returned from a call to a COM component
In my case, it was because i had differents projects with same GUID in my solution. (Project was created by copy/paste)
My problem manifested with opening Win10 appxmanifest file (no pun intended). Simply installing Windows 10 tools and SDK (go to New->Project->Select Windows->Install Tools) fixed it.
Add on development initiated on x86 architecture or 64 bit system then it will run on 32bit system also.
but if you Add on development initiated on 32 bit system and then you want to do changes on source code in 64 bit
Note: if you are connected SAP Licence on server system then set the port and set server name through service manager otherwise System will give error:
Connection Context :- Retrieving the COM class factory for component
with CLSID {632F4591-AA62-4219-8FB6-22BCF5F60090} failed due to the
following error: 80040154 Class not registered (Exception from
HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)).
I fixed the same issue by deleting ComponentModelCache folder
Close Visual Studio (if you haven’t done so already out of despair)
Open a file explorer window and navigate toyour AppData folder. You can get there by:
In the search bar, type %APPDATA%/.. and press enter
Alternatively, navigate to C:\Users\\AppData
Go into Local\Microsoft\VisualStudio\<version> where is 12.0 for Visual Studio 2013.
Delete the ComponentModelCache folder.
From here: http://withmartin.net/how-visual-studios-component-model-cache-can-be-a-pain/
I faced the same issue in Visual Studio 2017,
Do follow these steps:
Start —> Run —> regsvr32 %SystemRoot%\System32\msxml3.dll
Start —> Run —> regsvr32 %SystemRoot%\SysWOW64\msxml3.dll
Clean the Project.
Restart visual studio.
Step 1 and 2 were copied from Besnik Kastrati post.
I find this answer
click Ctrl+Alt+J
click (...) in the top
now you can add dll from Browse , .Net or another
After clicking the OK button click at (add to references in selected Project in solution explorer) (this is a green plus "+" button)
I got this error when trying to install a nuget package that I had previously downloaded and installed in another project.
Clicking Clear all NuGet Cache(s) under Tools > Options > NuGet Package Manager solved this for me
I encountered this error after installing VS2019 but while trying to open a large solution (20+ projects), with both vcxproj and csproj projects, that target VS2015. The csproj all loaded fine, while the vcxproj all failed with the OP's error. Deleting the .vs folder did not work.
What did work was setting VC++'s "Fallback Location", under the "Browsing Database Fallback" settings.
Tools (menu)
-Options...
--Text Editor
---C/C++
---Advanced
----Browsing Database Fallback
-----Fallback Location
I set mine to D:\VC++\v16. Where I use v140 for VS2015 and v141 for VS2017. Also set "Always Use" and "Do not warn".
When I open a particular mvc 3 website project in VS 2010 I get the following message:
The Web Project "X" requires missing web components to run with Visual Studio. Would you like to download and install them using the Web Platform Installer now?
ASP.NET Web pages with Razor syntax.
When I click yes
The web platform installer shows with the message that "0" items need to be installed.
My other mvc 3 projects do not show this behavior
Not a major inconvenience, but still...
thoughts any one?
I got the same error after reinstalling my computer.
I came to this conclusion, VS needs IISExpress to load my additional project. The addition projects has a webservice and it can run locally. Even if my endpoints points to a local address it still needs the IISExpress (standard IIS 7.5 does not respond the endpoint request) to open from VS (im running VS2010).
So after installing IISExpress i could reload my project in VS.
C.,
That shouldn't happen, and it would be interesting to figure out why. In the meantime, you should be able to turn this off by unchecking the "Package Restore" checkbox in Visual Studio's Options dialog. (Select "Package Manager" in the tree view to find it.)
If it's happening only for specific projects, you can solve this more surgically by removing the packages.config file for the affected project. In fact, if you want to do root cause analysis, you should look into why that file exists and how it got there.
HTH,
Clay
I'm opening a solution that was apparently built on Visual Studio 2003 (not sure, I don't know anything about it) and trying to migrate to 2010. When trying to migrate I get the message:
the application for project '' is not installed make sure the application for the project type (.csproj) is installed.
If I open each one of the single projects of the solution they migrate fine but not the solution itself.
Right-click on the project file, then "Reload"
If your solution opens, but your project is showing as "incompatible", it may need to just reload. This worked for me when running an update from VS, and it did not recognize my njsproj
I know this is an old question, but it is still occurring in VS 2013.
I had an old VS 2003 web application. I opened it in VS 2013 (Ultimate) and had the error message:
Could not find the server on the local machine.
Creating a virtual directory is only supported on the local IIS server
along with
The application for project is not installed.
Yes, I am upgrading, and yes, I don't have some other elements ready. Giving me errors is fine - but why are you not completing the migration/load of the project. I can't fix the other issues if you don't LOAD ANYTHING! You loaded the subprojects, and then you told me that I should choose a later .NET Framework. Great, I did that. So why didn't you just finish loading the main project and let me fix the errors?
Lots of attempts to fix this failed. My final solution, just to get the project loaded was {arrow pierces chest, dies with Arghhhhhh on his lips}...
I located the {project}.csproj file. I found the <Reference> sections. The paths to the .NET Framework components were no longer valid and referred to old versions no longer installed (yeah, upgrading, remember?). I manually changed the paths to refer to .NET Framework 4.5 components. The project still didn't load.
Then I located the {project}.csproj.webinfo file. It referred to http://localhost/{stuff}/{project}.csproj, so I just set it to {project}.csproj. No luck. Then I just renamed the webinfo file to hide it. Eureka, the project was hot!
The project loaded, I got the "You have completed the first step in converting your Visual Studio .NET 2003 web project. To complete the conversion, please select your project in the Solution Explorer and choose the 'Convert to Web Application' context menu item." Which, of course, is not present, but is present as the very last item in the Project menu. Then I got the "This action will add designer and code behind files required for converting Web site projects to Web application projects. Do you want to continue?" You bet your posterior I want to continue! And now I have a project I can actually start to fix. Thanks, Microsoft, for the informative error messages.
If your projects individually migrate fine, then create a new blank visual studio 2010 solution, and add new projects individually (right click on solution->add->existing project)
But I'm not sure that your projects will load fine individually. There are project types that require some additional software to be installed in order to be supported. The most frequent problems I face are old projects built with old versions of asp.net mvc (1 or 2) and I have asp.net mvc 3 installed...or really old projects built with asp.net ajax...In those cases, you have to install that additional software and then import project, or find a tool to upgrade that project type to a newer version.
I found a solution that worked for Visual Studio 2017.
In Visual Studio, go to Tools > Extensions and updates. At the upper-right search box, search for "integration". It should come up with Analysis or Diagnostic Tools (or similar). Click Disable, then Enable. Exit the dialog, and close Visual Studio. Relaunch and open your solution again. Your projects will still complain they can't be loaded because of incompatibilities, but now you can right-click them individually and select "Reload Project" and they should load fine.
Credit goes to Paul Potter and Paul Shaughnessy at https://developercommunity.visualstudio.com/content/problem/216061/project-incompatible-application-not-installed.html - I just did the verification work, condensing the information, and delivery :)
Adding this answer as reference for people who landed here for missing ".smproj" file.
This issue can arise due to various project files missing. For me, it was because of ".smproj" file missing which is Project file for SQL Server Analysis Services(SSAS). I re-installed SQL Server Data Tools (SSDT) and restarted the Visual studio.
Originally Answered here
Sometimes the SSIS or SSAS Extension in "Manage Extension" is disabled in the settings and must be Enabled manually. And then restart Visual Studio
It happened to me as wel.
You usualy do really need only to reload project in the solution. But in some cases you maybe:
didn't install SQL Server Data Tools (SSDT) for VS
have to enable SQL Server Data Tools manualy in the Extensions
If you have both things settled then try to reload project again. This happened to me when I moved from VS2019 to VS2022 and extension was somehow disabled.
I am using visual studio 2019 and I was faced with this issue when I reopened my ASP.Net webform App in visual studio after modifying for install SSDT.
this problem happens when Visual studio packages will modify (Especially when SSDT will be installed).
To solve this problem you have to go to you project folder and looking for the folder that named '.vs', this folder is hidden.
Deleting these folder will solve the problem because after that when you will open your project with visual studio, it will create the folder again.
Adding this for those who face issues for SSRS projects in VS2017 from earlier version as this comes up in google search.
In Visual Studio, go to Tools > Extensions and updates. Download the below :
Microsoft Reporting Services Projects
Microsoft RDLC Report Designer
In SSIS 2017, t the upper-right search box, search Microsoft Integration Services Projects.
go to Tools > Extensions and updates.
Enable -"Microsoft Integration Services Projects"
This will help to resolve the issue re-launch the SSIS
For my case, I disabled this extension and turns out, it is needed.
Enabling it resolved my problem.
In VS2019 Before you try any of the above right click the solution and click "Resolve Errors" no kidding that made my tabular model solution being available again.
For me what worked was a variation of #vapcguy solution.
Go to #vapcguy link for Paul Potter and Paul Shaughnessy solution: https://developercommunity.visualstudio.com/content/problem/216061/project-incompatible-application-not-installed.html - I
Follow comment on Paul Potter's post by Albert Romeo
Integration Services Plugin was disabled(as explained before: Goto Tools > Extensions and updates > and search for integration/analysis/reporting and enable application
I had to enable integration services, then reload project. I don't know why since I've been using the same SSIS project several times a week for months.