I'm trying to debug the following code:
TESTS=$(shell cat yoursourcefile)
all: $(TESTS)
%: compile_design
compile $#_tb.vhd >> log_file.log
simulate $#
I got this error:
makefile_tb.vhd >> log_file.log
as if makefile is a target
this error disappears when I add a character or more before %:
T%: compile_design
compile $#_tb.vhd >> log_file.log
simulate $#
This works but implies that all my targets starts with "T" which is not always the case.
My questions are:
what's exactly the function of % here ?
How to get rid of this error?
As suggested, I added
makefile: ; $#:
at the end, so I have now:
TESTS=$(shell cat yoursourcefile)
all: $(TESTS)
%: compile_design
compile $#_tb.vhd >> log_file.log
simulate $#
makefile: ; $#:
then when I do:
make all
I get [all] error2 all_tb.vhd >> log_file.log
but all_tb.vhd does not exist !
The %: compile_design rule is a "match-anything" pattern rule. It says "hey make, if you ever want to build any file, with any name, then you can do it by running these commands. Oh and by the way, if you have a file you want to build and it's older than the compile_design file, then you need to rebuild it". Generally you want to avoid match-anything rules, but if your target names truly have no specific pattern, you can't.
When you add the T before it then it tells make that instead of any file, that rule can only build files that begin with T.
The reason make is trying to rebuild the makefile is that GNU make has a special feature that allows it to remake its own makefiles. So after it reads its makefile it will try to re-make it. Normally this has no effect because there's no rule to build a makefile, but here you've added a rule that you've told make can build anything. Adding the T keeps the pattern from matching Makefile because Makefile doesn't begin with T.
The simplest thing for you to do is define an explicit rule for the makefile: make always chooses an explicit rule, if it exists, over an implicit rule like a pattern rule:
Makefile: ; #:
This creates an explicit rule that does nothing (: is the shell built-in command that does nothing).
Related
I have the following wildcard "programming" make rule that uploads a binary to a device. This obviously does not produce a real file, so should be marked phony. However, how do you mark a % percent wildcard rule phony?
%-tangnano-prog: %-tangnano.fs
openFPGALoader -b tangnano $^
.PHONY: %-tangnano-prog clean all
The phony rule does not give any error whatever you put there, so hard to tell if it worked. But I believe it did not:
$ touch blinky-tangnano-prog
$ make blinky-tangnano-prog
make: 'blinky-tangnano-prog' is up to date.
Thee are basically two possibilities:
You know in advance what %-tangnano-prog targets you can encounter. Just assign all their prefixes to a make variable, use make functions to compute the full target names and declare them as phony:
P := blinky foo bar
T := $(addsuffix -tangnano-prog,$(P))
.PHONY: tangnano-prog $(T)
tangnano-prog: $(T)
%-tangnano-prog: %-tangnano.fs
openFPGALoader -b tangnano $^
You do not know in advance what targets you can encounter. Use the same Makefile but pass the list of target prefixes to build on the command line:
$ make tangnano-prog P="blinky foo bar"
Consider the following Makefile
foo:
#echo '$#'
test:
#echo '$#'
#echo '---'
# Catch-all target
%: test
#echo '+++'
#echo '$#'
When issuing make bar the following is the console output:
$ make bar
test
---
+++
Makefile
+++
bar
I would like to understand the origin of Makefile which shows it is received as argument at some point, and also how to get rid of it in such a scheme. This is using
GNU Make 4.1
Built for x86_64-apple-darwin13.4.0
GNU make treats the makefile itself as a target that needs to be updated. See How Makefiles Are Remade:
... after reading in all makefiles, make will consider each as a goal target and attempt to update it. If a makefile has a rule which says how to update it (found either in that very makefile or in another one) or if an implicit rule applies to it (see Using Implicit Rules), it will be updated if necessary...
If you know that one or more of your makefiles cannot be remade and you want to keep make from performing an implicit rule search on them, perhaps for efficiency reasons, you can use any normal method of preventing implicit rule look-up to do so. For example, you can write an explicit rule with the makefile as the target, and an empty recipe (see Using Empty Recipes).
Hence, the catch-all-target % is used to update Makefile.
Makefiles often do not have to be updated, so it is customary to add an empty rule for that:
Makefile : ;
I have another make-like tool that produces an XML as an artifact after parsing my makefile which I'll then further process with Python.
It'd simplify things for me - a lot - if I could have make consider every single prerequisite to be an actual target because then this other tool
will classify each and every file as a "job".
This is a fragment of my makefile:
.obj/eventlookupmodel.o: C:/Users/User1/Desktop/A/PROJ/src/AL2HMIBridge/LookupModels/eventlookupmodel.cpp C:\Users\User1\Desktop\A\PROJ\src\AL2HMIBridge\LookupModels\eventlookupmodel.h \
C:/Users/User1/Desktop/A/PROJ/qt5binaries/include/QtCore/qabstractitemmodel.h \
C:/Users/User1/Desktop/A/PROJ/qt5binaries/include/QtCore/qvariant.h \
...
I'd want for make to think I have a dummy rule for each prerequisite such as below:
C:/Users/User1/Desktop/A/PROJ/qt5binaries/include/QtCore/qvariant.h:
#echo target pre= $#
C:/Users/User1/Desktop/A/PROJ/qt5binaries/include/QtCore/qabstractitemmodel.h:
#echo target pre=$#
C:/Users/User1/Desktop/A/PROJ/src/AL2HMIBridge/LookupModels/eventlookupmodel.cpp :
#echo target pre=$#
C:\Users\User1\Desktop\A\PROJ\src\AL2HMIBridge\LookupModels\eventlookupmodel.h:
#echo target pre=$#
I don't care about the exact form of the rule just that each file is considered an actual target.
My method of passing in this rule would be by setting the MAKEFILES variable like so
make all MAKEFILES=Dummy.mk
with Dummy.mk containing this rule so that I do not modify the makefiles.
I've tried the following so far.
Dummy.mk:
%.h:
#echo header xyz = $#
%:
#echo other xyz= $#
This partially works.
I run make all --trace --print-data-base MAKEFILES=Dummy.mk and I can see that
make does "bind" the %.h: rule to the header files. In the --print-data-base section, I see that rule being assigned to the header files.
C:/Users/User1/Desktop/A/QNX_SDK/target/qnx6/usr/include/stddef.h:
# Implicit rule search has been done.
# Implicit/static pattern stem: 'C:/Users/User1/Desktop/A/QNX_SDK/target/qnx6/usr/include/stddef'
# Last modified 2016-05-27 12:39:16
# File has been updated.
# Successfully updated.
# recipe to execute (from '#$(QMAKE) top_builddir=C:/Users/User1/Desktop/A/HMI_FORGF/src/../lib/armle-v7/release/ top_srcdir=C:/Users/User1/Desktop/A/HMI_FORGF/ -Wall CONFIG+=release CONFIG+=qnx_build_release_with_symbols CONFIG+=rtc_build -o Makefile C:/Users/User1/Desktop/A/HMI_FORGF/src/HmiLogging/HmiLogging.pro
', line 2):
#echo header xyz = $#
However, I do NOT see the "echo header xyz $#"-rule being executed.
Regarding the %: rule, it is neither executed for the .cpp files nor "bound" to them in the --print-data-base section.
However, it is bound and executed for existing targets which have no suffix i.e.
all: library binary
binary: | library
ifs: | library
For the %: rule, the reason for this behavior is because of 10.5.5 Match-Anything Pattern Rules: If you do not mark the match-anything rule as terminal, then it is non-terminal. A non-terminal match-anything rule cannot apply to a file name that indicates a specific type of data. A file name indicates a specific type of data if some non-match-anything implicit rule target matches it.
If I make it non-terminal - no double colon - then the rule doesn't apply to built-in types like .cppunless I un-define the built-in rules that negate my intended %: rule.
If I make it terminal, "it does not apply unless its prerequisites actually exist". But a .h or .cpp doesn't technically have prerequisites; can I just create a dummy file and have that as its prerequisite?
NOTE: This has NOTHING to do with gcc -M generation. Yes the -M option would help in the specific case of header and source files but this question is for more generic targets and prerequisites that already exist in the makefile when make is launched.
This may take a few iterations. Try:
%.h: null
#echo header xyz = $#
%: null
#echo other xyz= $#
null:
#:
Try generating static pattern rules for the header files. See one of the answers to Make ignoring Prerequisite that doesn't exist.
Static pattern rules only apply to an explicit list of target files like this:
$(OBJECTS): %.o: %.c
*recipe here*
where the variable OBJECTS is defined earlier in the makefile to be a list of target files (separated by spaces), for example:
OBJECTS := src/fileA.c src/fileB.c src/fileC.c
Note that you can use the various make utility functions to build that list of target files. For example, $(wildcard pattern), $(addsuffix), etc.
You should also ensure that the recipe "touches" the header file to change the timestamp.
I've found that using static pattern rules instead of pattern rules fixes problems where make doesn’t build prerequisites that don’t exist, or deletes files that you want.
Here is an example of using wildcard to copy files from one directory to another.
# Copy images to build/images
img_files := $(wildcard src/images/*.png src/images/*.gif src/images/*.jpg \
src/images/*.mp3)
build_images := $(subst src/,$(BUILD_DIR)/,$(img_files))
$(build_images): $(BUILD_DIR)/images/% : src/images/%
mkdir -p $(dir $#)
cp -v -a $< $#
There are other make functions like addprefix that could be used to generate a more complex file specification.
I've been trying to get a makefile, a, to include another makefile, b, if the target specified is not found in file a. I'm using this snippet to try and achieve this, but from echos I've put into the file I can see that makefile b is being accessed even when the target is found in a and run.
The snippet I'm using from the link above is:
foo:
frobnicate > foo
%: force
#echo "No target found locally, running default makefile"
#$(MAKE) -f Makefile $#
force: ;
Specifically I'm getting "Nothing to be done" outputs when makefile b is being used, and makefile a is behaving as expected. This is shown below:
$ make all # all target appears in both make files
No target found locally, running default makefile
make[1]: Entering directory `/home/user/currdir' # (b)
make[1]: Nothing to be done for `Makefile'.
make[1]: Leaving directory `/home/user/currdir'
Local all # (a)
Is there a better way to be doing this?
addition: After adding another echo to the % rule, I've found that $# is "Makefile", when it should be the target trying to be built.
I don't really understand your question based on the example you gave; there is no "a" or "b" in that example, just one Makefile.
However, the behavior you're seeing is due to GNU make's re-making makefiles capability. When you create match-anything pattern rules as you've done, you have to consider that every single target or prerequisite that make wants to build will match that rule. That's a large burden.
You can avoid having remade makefiles match by creating explicit rules for them, such as:
Makefile: ;
I am trying to compile an OpenCobol program using make. I am always getting "make: Nothing to be done for test1.cob". Here is my makefile. I had put a TAB before cobc. But still I am getting that message. Please help.
Thanks.
COBCWARN = -W
%: %.cob
cobc $(COBCWARN) -free -x $^ -o $#
And here is my cobol program.
IDENTIFICATION DIVISION.
PROGRAM-ID. TEST1.
PROCEDURE DIVISION.
DISPLAY 'Hello world!'.
STOP RUN.
Your makefile contains no actual targets. You have defined only a pattern rule which tells make how to build targets that match the pattern. But make doesn't go looking for targets out on the filesystem that could match the pattern, it only checks the pattern against targets that have been specifically requested.
You don't have any specific targets (files) listed in your makefile, so the only way make can know about a target is if you give the target to be built on the command line.
You are running this command from within vim, using the % special token, which expands to the name of the file currently being edited. That means you are running the command:
make test1.cob
because you are editing the file test1.cob. So, you are telling make "please try to create the target (file) test1.cob". But, that file already exists (it's the file you're writing). So make says "nothing to do".
If you run make and ask it to create the target you really want created, it will work:
make test1
Now the file test1 doesn't exist, and make can find a pattern rule that knows how to build it, so make will run that rule.
Alternatively, you can edit your makefile to add the specific target, like this:
COBCWARN = -W
test1: test1.cob
%: %.cob
cobc $(COBCWARN) -free -x $^ -o $#
Then you can run make with no arguments at all. Without any command line arguments, make will look in the makefile for explicit targets and find test1 as the first one. It sees that there is a rule (the pattern rule) that matches that target, so it will build that target.
UPDATE
If you want to allow a simple command make to build multiple programs, write your makefile like this:
COBCWARN = -W
all: test1 test2 test3
.PHONY: all
%: %.cob
cobc $(COBCWARN) -free -x $^ -o $#
Now from vim you can just say :!make and that's it.
If you run make with no arguments then it will find the first explicit target in the makefile and build that. In this example the first target is all, and its prerequisites are the possible programs to build. To build each one make sees that it can apply the pattern rule, and so it will do so (if the .cob file has been modified since the last time the program was built).