I want to edit a small video frame/image by image without losing quality (or without losing much of it). I have used ffmpeg to split into images using the following line:
ffmpeg -i test.mp4 $filename%%03d.bmp
This worked fine. I tried merging the images back using several lines including:
ffmpeg -re -f image2 -framerate 30 -i $filename%%03d.bmp -c:v prores_aw -pix_fmt yuv422p10le test.mkv
Though, this results in a difference between brightness/contast between original and merged videos. The merged file would be a bit darker (you have to look close) than original file. What can I do to fix this?
Thanks for your time.
I have a .m2p file (which is an image file i believe that contains many images, kinda like a video of still images) that I would like to convert to any image file (preferably .png or .jpg).
Does anyone know if there is a possible way to do so?
Does anyone know how to convert these, using a script, to a different file extension essentially. Extract out all the images from a .m2p file?
Any help would be appreciated.
Figured out the answer to this.
Can simply just use ffmpeg (for Mac atleast).
Images:
To grab a still from a certain time:
ffmpeg -i video.m2p -ss 00:00:07.000 -vframes 1 thumb.png
Videos:
To convert m2p to mp4
ffmpeg -i example.m2p -f mp4 -vcodec libx264 -preset slow -profile:v main -acodec aac example.mp4 -hide_banner
Random: I used the slow preset just so it outputs a better quality video
From the shell, when I specify a sequence of images via %d in the input filename, FFMPEG insists "No such file or directory", despite evidence to the contrary. Looking online, I haven't managed to find any references to generating video from a sequence of images using FFMPEG where %d is not used, yet it seems to fail here.
My images should be identified by FFMPEG from img%06d.gif. Issuing ls img[0-9][0-9][0-9][0-9][0-9][0-9].gif succeeds in the very same directory I issue the FFMPEG command.
The command I use is:
ffmpeg -i img%06d.gif -c:v libx264 -r 30 -pix_fmt yuv720p test.mp4
What could possibly be going wrong???
The following definitely works:
ffmpeg -i images%06d.png -c:v libx264 -r 30 test.mp4 -y
However it doesn't work with GIF pictures.
You can losslessly convert your pictures to PNG and run the above command line.
I am trying to create a video out of a sequence of images and various audio files using FFmpeg. While it is no problem to create a video containing the sequence of images with the following command:
ffmpeg -f image2 -i image%d.jpg video.mpg
I haven't found a way yet to add audio files at specific points to the generated video.
Is it possible to do something like:
ffmpeg -f image2 -i image%d.jpg -i audio1.mp3 AT 10s -i audio2.mp3 AT 15s video.mpg
Any help is much appreciated!
EDIT:
The solution in my case was to use sox as suggested by blahdiblah in the answer below. You first have to create an empty audio file as a starting point like that:
sox -n -r 44100 -c 2 silence.wav trim 0.0 20.0
This generates a 20 sec empty WAV file. After that you can mix the empty file with other audio files.
sox -m silence.wav "|sox sound1.mp3 -p pad 0" "|sox sound2.mp3 -p pad 2" out.wav
The final audio file has a duration of 20 seconds and plays sound1.mp3 right at the beginning and sound2.mp3 after 2 seconds.
To combine the sequence of images with the audio file we can use FFmpeg.
ffmpeg -i video_%05d.png -i out.wav -r 25 out.mp4
See this question on adding a single audio input with some offset. The -itsoffset bug mentioned there is still open, but see users' comments for some cases in which it does work.
If it works in your case, that would be ideal:
ffmpeg -i in%d.jpg -itsoffset 10 -i audio1.mp3 -itsoffset 15 -i audio2.mp3 out.mpg
If not, you should be able to combine all the audio files with sox, overlaying or inserting silence to produce the correct offsets and then use that as input to FFmpeg. Not as convenient, but guaranteed to work.
One approach I can think of is to create your audio file for the whole duration of the video first and then mux the audio with the video file
This question already has answers here:
How to create a video from images with FFmpeg?
(9 answers)
Closed 3 years ago.
I'm wanting to take a bunch of images and make a video slideshow out of them. There'll be an app for that, right? Yup, quite a few it seems. The problem is I want the slides synced to a piece of music, and all the apps I've seen only allow you to show each slide for a multiple of a whole second. I want them to show for multiples of 1.714285714 seconds to fit with 140 bpm.
The tools I've seen generally seem to have ffmpeg under the hood, so presumably this kind of thing could be done with a script. But ffmpeg has sooo many options...I'm hoping someone will have something close.
I'll have up to about 100 slides, the ones that have to show for 3.428571428 secs or whatever I guess I can simply show twice.
For very recent versions of ffmpeg (roughly from the end of year 2013)
The following will create a video slideshow (using video codec libx264 or webm) from all the png images in the current directory. The command accepts image names numbered and ordered in series (img001.jpg, img002.jpg, img003.jpg) as well as random bunch of images.
(each image will have a duration of 5 seconds)
ffmpeg -r 1/5 -pattern_type glob -i '*.png' -c:v libx264 out.mp4 # x264 video
ffmpeg -r 1/5 -pattern_type glob -i '*.png' out.webm # WebM video
For older versions of ffmpeg
This will create a video slideshow (using video codec libx264 or webm) from series of png images, named img001.png, img002.png, img003.png, …
(each image will have a duration of 5 seconds)
ffmpeg -f image2 -r 1/5 -i img%03d.png -vcodec libx264 out.mp4 # x264 video
ffmpeg -f image2 -r 1/5 -i img%03d.png out.webm # WebM video
You may have to slightly modify the following commands if you have a very recent version of ffmpeg
This will create a slideshow in which each image has a duration of 15 seconds:
ffmpeg -f image2 -r 1/15 -i img%03d.png out.webm
If you want to create a video out of just one image, this will do (output video duration is set to 30 seconds):
ffmpeg -loop 1 -f image2 -i img.png -t 30 out.webm
If you don't have images numbered and ordered in series (img001.jpg, img002.jpg, img003.jpg) but rather random bunch of images, you might try this:
cat *.jpg | ffmpeg -f image2pipe -r 1 -vcodec mjpeg -i - out.webm
or for png images:
cat *.png | ffmpeg -f image2pipe -r 1 -vcodec png -i - out.webm
That will read all the jpg/png images in the current directory and write them, one by one, using the pipe, to the ffmpeg's input, which will produce the video out of it.
Important: All images in a series need to be of the same size (x and y dimensions) and format.
Explanation: By telling FFmpeg to set the input file's FPS option (frames per second) to some very low value, we made FFmpeg duplicate frames at the output and thus we achieved to display each image for some time on screen. You have seen, that you can set any fraction as framerate. 140 beats per minute would be -r 140/60.
Source: The FFmpeg wiki
For creating images from a video use
ffmpeg -i video.mp4 img%03d.png
This will create images named img001.png, img002.png, img003.png, …
You can extract images from a video, or create a video from many
images:
For extracting images from a video:
ffmpeg -i foo.avi -r 1 -s WxH -f image2 foo-%03d.jpeg
This will extract one video frame per second from the video and will
output them in files named 'foo-001.jpeg', 'foo-002.jpeg', etc. Images
will be rescaled to fit the new WxH values. If you want to extract
just a limited number of frames, you can use the above command in
combination with the -vframes or -t option, or in combination with -ss
to start extracting from a certain point in time. For creating a video
from many images:
ffmpeg -f image2 -i foo-%03d.jpeg -r 12 -s WxH foo.avi
The syntax foo-%03d.jpeg specifies to use a decimal number composed
of three digits padded with zeroes to express the sequence number. It
is the same syntax supported by the C printf function, but only
formats accepting a normal integer are suitable.
This is an excerpt from the documentation, for more info check on the documentation page of ffmpeg.
I wound up using this:
mencoder "mf://html/*.png" -ovc x264 -mf fps=1.16666667 -o output.avi
and changing the sample rate afterwards in LiVES.
a load more details (and the end result video) at: http://hyperdata.org/hackit/ (mirror)