I am trying to train tesseract for work on windows. The process finish well but when I make the call to
tesseract.exe file.tiff out
after this the run, file is empty.
I don´t know what is happen here, I did the same process under linux and work perfectly.
I think that the problem could be the generation with the mftraining.exe.
It throw this messages:
Warning: no protos/configs for a in CreateIntTemplates()
Warning: no protos/configs for f in CreateIntTemplates()
Warning: no protos/configs for l in CreateIntTemplates()
Warning: no protos/configs for o in CreateIntTemplates()
Warning: no protos/configs for r in CreateIntTemplates()
Error: no configs for class a in mftraining
Error: no configs for class f in mftraining
Error: no configs for class l in mftraining
Error: no configs for class o in mftraining
Error: no configs for class r in mftraining
any other end without problems
Somebody can help me please?
I know the question is old, but if you're looking for a way to train current version of Tesseract (4+) on Windows, I have created a GUI that automates all the process. It requires Python 3. Here is my GitHub repository that contains all the sources and compiled portable executable file.
did you try to follow this manuel from google on how to train tesseract ?
https://code.google.com/p/tesseract-ocr/wiki/TrainingTesseract3
According to here:
Training is not supported on windows.
If you want to test/fix something, use the current code from repository (it should be posible to build it with msys2 on windows)
Training tools are only included in Tesseract 3.03+. Separate commands are used to build the main program tesseract.exe and the training tools. Shown as below.
I have successfully built the main program on Windows 7 with MSYS2. But I failed to build the training tools.
Update
Now I have turned to use Xubuntu to build both the main program and the training tools. And the training process can be carried out. Though there's a lot of details to be tuned.
Related
I'm trying to install boost mpi from boost 1_78_0 on macOS, but I'm getting this error:
error: Unable to find file or target named
error: '/mpi//mpi'
error: referred to from project at
error: 'libs/mpi/build'
I've tried various different entries in my project-config.jam:
using mpi ;
using mpi : /Users/nick/sfw/openmpi-4.1.2/bin/mpicxx ;
and putting the mpi bin directory in my PATH. I've run ./b2 with debugging output and it looks like my mpicxx is being used, but I'm still getting the error. I've installed this successfully many times on linux using the using mpi directive without a problem.
thanks.
I was trying to build existing Dlang project on my home Mac. But I am getting this error. I haven't find anything about it.
$ dub build
Running pre-generate commands for vibe-d:tls...
Performing "debug" build using dmd for x86_64.
tinyendian 0.2.0: target for configuration "library" is up to date.
dyaml 0.8.0: building configuration "library"...
/Library/D/dmd/src/phobos/std/uni.d(935,32): Error: object._d_arraysetlengthTImpl not found. The current runtime does not support resizing arrays, or the runtime is corrupt.
/Library/D/dmd/src/phobos/std/uni.d(968,32): Error: object._d_arraysetlengthTImpl not found. The current runtime does not support resizing arrays, or the runtime is corrupt.
/Library/D/dmd/src/phobos/std/uni.d(4064,18): Error: template instance std.uni.MultiArray!(BitPacked!(uint, 13LU), BitPacked!(bool, 1LU)).MultiArray.length!0LU error instantiating
/Library/D/dmd/src/phobos/std/uni.d(4312,37): instantiated from here: TrieBuilder!(bool, dchar, 1114112, sliceBits!(8LU, 21LU), sliceBits!(0LU, 8LU))
/Library/D/dmd/src/phobos/std/regex/internal/ir.d(26,14): instantiated from here: CodepointSetTrie!(13, 8)
/Library/D/dmd/src/phobos/std/uni.d(935,32): Error: object._d_arraysetlengthTImpl not found. The current runtime does not support resizing arrays, or the runtime is corrupt.
/Library/D/dmd/src/phobos/std/uni.d(968,32): Error: object._d_arraysetlengthTImpl not found. The current runtime does not support resizing arrays, or the runtime is corrupt.
/Library/D/dmd/src/phobos/std/uni.d(4064,18): Error: template instance std.uni.MultiArray!(BitPacked!(uint, 13LU), BitPacked!(bool, 1LU)).MultiArray.length!1LU error instantiating
/Library/D/dmd/src/phobos/std/uni.d(4312,37): instantiated from here: TrieBuilder!(bool, dchar, 1114112, sliceBits!(8LU, 21LU), sliceBits!(0LU, 8LU))
/Library/D/dmd/src/phobos/std/regex/internal/ir.d(26,14): instantiated from here: CodepointSetTrie!(13, 8)
dmd failed with exit code 1.
Can somebody pls help?
I am using these:
MacOS 10.15.4
DMD64 v2.091.1
DUB 1.20.1
Thx to Adam D. Ruppe.
It looks like there was a problem with previously installed version of dmd.
Solved by:
brew uninstall dub
brew uninstall dmd
delete /Library/D directory
brew install dmd
brew install dub
476/5000
rstudio generates error when running R code with python code. At first the code worked very well but in the second installation it started to generate faults. Here is the link of the code in case you want to play #https: //www.r-bloggers.com/r-and-python-using-reticulate-to-get-the-best-of-both-worlds/
. My laptop is hp 4 gigs of ram and 500 mb of hard disk.
I would greatly appreciate who can explain the failure and how to solve it.
I have reinstalled anaconda last version twice.
library(reticulate)
use_python("/usr/local/bin/python")
use_virtualenv("r-reticulate")
os <- import("os")
Error: lexical error: invalid char in json text.
WARNING: The conda.compat modul
(right here) ------^
os$listdir(".")
Error: object 'os' not found
py_config()
Error: lexical error: invalid char in json text.
WARNING: The conda.compat modul
(right here) ------^
Actually, it comes from a deprecation warning reported a few days ago (fix compat import showing warning #8507).
But the fact is that this warning in "conda.compat" generates some errors, for example in the case of using conda environments in R through "reticulate" functions. This issue has been reported quite recently Conda warnings taken as errors #477.
The solution is to simply install the github version of "reticulate" in order to avoid these errors and ignore the conda warnings which shouldn't necessarily impede these functionalities. You can do it like this way:
remotes::install_github("rstudio/reticulate")
And don't forget to have the latest Rtools installed in your operating system!
This might be useful for you: https://docs.anaconda.com/anaconda/user-guide/tasks/switch-environment/
I have Anaconda, and set up Python 2 environment. Once activated, run 'use_python' with the path to that environment and set the 'required' parameter to TRUE.
I had the same problem. I solved the problem by installing an older version of conda.
In anaconda promt
conda install conda = 4.1.6
I am currently trying - unsuccessfully to install perl PDL as I would like to automate some of my data analysis and graphics generation.
Unfortunately I seem unable to even install the necessary modules without issue, let alone create a small script to deal with my data files.
I have some rudementary experience with Perl but Nothing fancy and am using Windows 10 x64.
Initially I went for the x64 strawberry perl v5.24 installation, followed by ppm installations of Astro::FITS::Header, Convert::UU, OpenGL and PDL - as instructed here http://pdl.perl.org/?page=install. However, there were issues with the installation of Inline::C and after trying the example listed on page 5 of the PDL_Book_Latest http://sourceforge.net/projects/pdl/files/PDL/2.4.10/PDL-Book-20120205.pdf/download there wasn't any image appearing, nor image file in any location I could think to search. Back to Google and still no luck finding any information on the source of this issue so I decided to go back to square one and use an older version in the hopes that it would be more well documented.
So, uninstallation of strawberry perl through Windows installed programs dialog, deletion of strawberry folder and registry entries containing "strawberry". Then a new installation of perl, with the Padre IDE, v5.14 - maybe some debugging fonctionality will help pinpoint the errors. Started installing the same modules (Astro::FITS::Header, Convert::UU, OpenGL, PGPLOT). Astro and Convert worked fine, but the OpenGL started throwing errors about ExtUtils::F77 which I am apparently missing after a few more hours searching. I go to install this module and it keeps giving errors about 'gfortan' being an unknown command... It was my understanding that the idea of PDL was to avoid fortran and C, and I have found next to no information about this installation problem so far.
So i decided to try an alternative approach. I installed the ppm module from cpan and repeated the initial installation process through the ppm command. This time i get:
"Unknown element 'PROVIDE' found inside SOFTPKG. at C:/Dwimperl/perl/site/lib/PPM.pm line 1462."
So my question is as follows:
Am I missing some critical step in the installation process? Is my system just handing this really badly, and if so is there any sort of possible work around? Is the fact that I tried two different versions liable to create path issues that could be at the root of this problem?
Could anyone provide an alternative and preferably not too complex route to install PDL with a given perl installation on Windows 10?
EDIT 1:
Here is the code for the error I got trying to install Inline::C, an apparent pre-requisite for PDL
code deleted to make space for updates...
EDIT 3:
I reinstalled GnuWin32 in the directory specified by PATH, rather that changing PATH, and the tried the installation again. Inline::C gave the same 'diff' and 'rm' errors. So i ran "cpanm --notest 'package'" to install Inline::C and then PDL, both said they were successful. However, even using '--notest' cpanm could not install OpenGL and PGPLOT.
The final objectif is to be able to produce graphics using the fonctions from PGPLOT: for example
# use PDL;
# use PDL::Graphics::PGPLOT;
# imag(sin(rvals(200,200)+1));
yet this doesn't work of course if PGPLOT can't install.
EDIT 4:
Tried the fix found by #Dr.Avalange at sourceforge https://sourceforge.net/p/pogl/bugs/26/ and noticed that I seem to have multiple copies of this file.
Here
Is this normal...?
EDIT 5:
So i uninstalled perl, deleted any lingering files I could find in %APPDATA%, %USERPROFILE% and C:/DWIM, and then ran ccleaner just in case I missed anything.
I then downloaded Strawberry perl 5.24.1 x64 for Windows and installed it.
After this, I ran 'cpanm Astro::FITS::Header', cpanm 'Convert-UU' and 'cpanm OpenGL' as per http://pdl.perl.org/?page=install. This all worked fine. Then I ran 'cpanm PDL' which installed Inline, Pegex, Win32::Mutex and Module::Compile dependencies. However, if had the same error with Inline::C that you mentioned previously.
I already had GetGnuWin32 installed before so not sure why this isn't working. The Windows 'Path' environment (not PATH - this doesn't exist according to the advaced system dialogue) is noted as
%USERPROFILE%\AppData\Local\Microsoft\WindowsApps;
In this directory I have the folder GetGnuWin32 which should have installed all the packages from the link you provided, unless there is a supplementary step that I missed to install this correctly? So I redownloaded the DiffUtils setup and ran that, installing to \programfiles(x86) (default option). I then reran 'cpanm PDL'.
I still get the same 'diff' error message. So is DiffUtils, not installing properly? (I did close and re-open the commandline between tries and after the installation)
EDIT 6:
So after installing PDL and PGPLOT with --notest I tried to run the following test and it failed. See below
C:\Windows\system32>perldl
perlDL shell v1.357
PDL comes with ABSOLUTELY NO WARRANTY. For details, see the file
'COPYING' in the PDL distribution. This is free software and you
are welcome to redistribute it under certain conditions, see
the same file for details.
ReadLines, NiceSlice, MultiLines enabled
Reading PDL/default.pdl...
Found docs database C:/Strawberry/perl/site/lib/PDL/pdldoc.db
Type 'help' for online help
Type 'demo' for online demos
Loaded PDL v2.017 (supports bad values)
Note: AutoLoader not enabled ('use PDL::AutoLoader' recommended)
pdl> use PDL::Graphics//PLplot
Unknown regexp modifier "/P" at (eval 62) line 4, at end of line
Unknown regexp modifier "/L" at (eval 62) line 4, at end of line
Unknown regexp modifier "/t" at (eval 62) line 4, at end of line
BEGIN not safe after errors--compilation aborted at (eval 62) line 5, <DATA> line 207.
pdl> use PDL::Graphics::PLplot
Can't locate PDL/Graphics/PLplot.pm in #INC (you may need to install the PDL::Graphics::PLplot module) (#INC contains: C:/Strawberry/perl/site/lib/MSWin32-x64-multi-thread C:/Strawberry/perl/site/lib C:/Strawberry/perl/vendor/lib C:/Strawberry/perl/lib .) at (eval 72) line 5.
BEGIN failed--compilation aborted
pdl> use PDL
pdl> use lib 'C:/Strawberry/perl/site/lib/PDL/Graphics'
pdl> use PGPLOT
pdl> use PDL::Graphics::PGPLOT
pdl> imag(sin(rvals(200,200)+1))
Undefined subroutine &PDL::Graphics::PGPLOT::pgqinf called at C:/Strawberry/perl/site/lib/PDL/Graphics/PGPLOT.pm line 408, <DATA> line 90.
pdl> exit
C:\Windows\system32>cpanm PDL::Graphics::PGPLOT::pgqinf
! Finding PDL::Graphics::PGPLOT::pgqinf on cpanmetadb failed.
! Finding PDL::Graphics::PGPLOT::pgqinf () on mirror http://www.cpan.org failed.
! Couldn't find module or a distribution PDL::Graphics::PGPLOT::pgqinf
C:\Windows\system32>cpan PDL::Graphics::PGPLOT::pgqinf
Loading internal null logger. Install Log::Log4perl for logging messages
CPAN: CPAN::SQLite loaded ok (v0.211)
Database was generated on Thu, 13 Apr 2017 13:49:14 GMT
C:\Windows\system32>
There was already a directory problem but I managed to point it in th right direction I had thought. Also tried installing the PLplot 'cpanm' said the installation was successful but there is no .pm file, only a .pd in another directory and so the use PDL::Graphics::PLplot fails as there is no .pm file to find.
EDIT: 7
So retrying ppm install http://www.sisyphusion.tk/ppm/PGPLOT.ppd seemed to work this time as the links int he explanation you provided are no longer in use
http://www.kalinabears.com.au/w32perl/pgplot-5.2.2-mingw32.tar.bz2
http://jrfonseca.home.dyndns.org/projects/gnu-win32/software/ported/patches/pgplot-5.2.2-mingw32.diff.gz
And while this seemed to work, there are no traces of the files that were listed as necessary for the installation, unless they were just for this specific method?
pgplot/bin/cpgplot.dll
pgplot/bin/pgplot.dll
pgplot/bin/grfont.dat
pgplot/include/cpgplot.h
pgplot/lib/cpgplot.a
pgplot/lib/pgplot.a
finally, trying the example again gives the following; no errors, but no image either...
Microsoft Windows [version 10.0.14393]
(c) 2016 Microsoft Corporation. Tous droits réservés.
C:\Windows\system32>perldl
perlDL shell v1.357
PDL comes with ABSOLUTELY NO WARRANTY. For details, see the file
'COPYING' in the PDL distribution. This is free software and you
are welcome to redistribute it under certain conditions, see
the same file for details.
ReadLines, NiceSlice, MultiLines enabled
Reading PDL/default.pdl...
Found docs database C:/Strawberry/perl/site/lib/PDL/pdldoc.db
Type 'help' for online help
Type 'demo' for online demos
Loaded PDL v2.017 (supports bad values)
Note: AutoLoader not enabled ('use PDL::AutoLoader' recommended)
pdl> use PDL
pdl> use PDL::Graphics::PGPLOT
pdl> imag(rvals(200,200)+1)
%PGPLOT, Unable to read font file: grfont.dat
%PGPLOT, Use environment variable PGPLOT_FONT to specify the location of the PGPLOT grfont.dat file.
Displaying 200 x 200 image from 1 to 142.421356201172, using 240 colors (16-255)...
pdl> $ENV{PGPLOT_FONT} = "C:/Strawberry/perl/site/lib/PGPLOT/pgplot_supp"
pdl> imag(rvals(200,200)+1)
Displaying 200 x 200 image from 1 to 142.421356201172, using 240 colors (16-255)...
pdl>
After translating from French I can see that you don't have diff in your system. Either install diff (part of gnu32: http://gnuwin32.sourceforge.net/) or just skip the tests. See also:
https://github.com/ingydotnet/inline-c-pm/issues/60
With Strawberry 5.24.1 simply type the following from the command prompt:
cpanm --notest PDL
or if you want to watch everything that's going on:
cpanm -v --notest PDL
This will take some time to run.
I had been trying to install tensorflow for a few day. However, cuda 7.5 is the version that tensorflow r0.10.0 supports default. So I can only install it from source. But I came after the following problem which bother me a lot.
.....
INFO: Reading options for 'clean' from /home/lhx/tensorflow-r0.10/tools/bazel.rc:
Inherited 'build' options: --force_python=py2 --host_force_python=py2 --python2_path=/usr/bin/python --define=use_fast_cpp_protos=true --define=allow_oversize_protos=true --define PYTHON_BIN_PATH=/usr/bin/python --spawn_strategy=standalone --genrule_strategy=standalone
Unrecognized option: --host_force_python=py2
ERROR: /home/lhx/tensorflow-r0.10/WORKSPACE:18:6: First argument of load() is a path, not a label. It should start with a single slash if it is an absolute path..
ERROR: /home/lhx/tensorflow-r0.10/WORKSPACE:22:6: First argument of load() is a path, not a label. It should start with a single slash if it is an absolute path..
ERROR: WORKSPACE file could not be parsed.
ERROR: package contains errors: third_party/boringssl.
ERROR: no such package 'external': Package 'external' contains errors.
Configuration finished
I just can't figure out what is going wrong and I have been trying for so long.
I experienced similar errors when my bazel was too outdated. You can try newer bazel version.