I'm not sure whether this is a bug or not, so I'm just going to ask this. I created a view (and block) with a 'Comment: Post date' field with 'Time ago (with "ago" appended)' as Date format. I didn't fill in a custom date format.
Everything is previewed perfectly, but when I go to my dashboard, I only see the "ago": the actual numbers (hours, minutes, seconds...) aren't displayed.
I cleared caches, but nothing happened. I'm still using the default Seven 7.23 administration theme for my dashboard and I didn't set a custom template file or anything else. I just created the view.
How can I solve this?
Edit: I exported my view, so you can read the code here.
Try clearing your cache in drupal. Admin > Configuration > Performance > Clear All Caches
(/admin/config/development/performance)
I noticed you said you added Comment: Post Date. If you did not mean to display the time of comments on the node then my guess is that would be your issue. If not comments exist, you have nothing to get the last time.
If you wanted to get the last time of the save for the node then you will need to switch to last updated to fix your issue.
Edit: It seems odd to me that everything is working in the views preview section but not on the actual page. This leads me to think it might have something to do with the user you are viewing it with. Are you logged in when you test it, or are you opening it in a different browser on a new session? Check the user permissions for your content field type and make sure "can view" is checked.
I don't know what causes the problem, but I solved it temporally. I changed the Date format to 'Time ago' an added the 'ago' manually via the 'Rewrite results' function.
Related
I am using BIRT Designer, I am having an issue of page break when generating the report as PDF.
After generating the PDF report, What happen is since the note from the input file is too long for the description column to accommodate some of the string is being pushed down to next line or being wrap to ensure that the note fits in the description column area which cause for the trailer details to be push to the next page.
I have tried many page break options like avoid before and after for tables/grid but nothing is working.
Please find the attachment of sample pdf for getting page break issue and rptdesign file and xml file.
So Please give some suggestion to solve as soon as possible.
Thanks and Regards,
Sharath.
I had similar issues in the past and found these answers a long time ago.
Set the page break interval to zero and see if this works for you. The page break before, inside and after settings should be set to Auto as setting something to avoid will always try to avoid page breaks when displaying your selection. Auto will use page breaks where necessary.
Check to see if this works for you.
You can also try entering this code in the beforeFactory section:
if( reportContext.getOutputFormat() == "pdf" ){
reportContext.getReportRunnable().designHandle.getDesignHand le().findElement(
"mytable").setProperty("pageBreakInterval",
0);
}
Go to the script tab and then change the name "mytable" to the name you have given your table under Properties > General > Name
Alright, in my web application there's a dropdown that UFT picks up as a 'WebElement' instead of a 'WebList'. The options available in this dropdown are all just 'divs' and the data within the div is dynamic. Has anyone had to deal with this before? I even tried using the absolute xpath within the object repository, but that seems to be inconsistent. Whenever I run my test the first time it interacts with the dropdown it will wait the entire object sync timeout before selecting the element. Then I have it going back to select another item from the dropdown and it goes instantly. This isn't the approach I want to take with this as the abs xpath could break at any time. I've been reading blog posts etc from as far back as 2008, and tried every person's suggestion but I can't reliably click a dropdown and select something. I can give more detail if needed, but any help here would be appreciated.
When UFT waits the object synchronization timeout and then succeeds to perform the action it's usually because it has been using smart identification. Look in the report to see if this is the case (or just disable smart identification and see what happens).
If this is the case, you should try to fine-tune the description to succeed on the description and not resort to smart identification.
I got it! This behaviour was being caused by the 'browser' being different in that part of my code. I think this happened due to some of the same items being added into the OR from different pages.
Instead of having:
Browser("Browser1").Page("Page1").WebElement("Element I want").
It was:
Browser("Browser2").Page("Page1").WebElement("Element I want").
Once this was corrected in the OR everything worked as expected.
I am building a new website in Joomla 3 and here is some really weird behavior i just stumbled over…
I get a wrong URL in Menu Items and read more links, saying, e.g
website.de/weOffer/drinks/Read%20Private%20Message/beer.
I would give you a real URL, but the project is still under development and classified.
The /Read%20Private%20Message/ part in the URL obviously does not belong there and gets inserted by joomla by default. The result of course is fatal. Not only the menu items aren't working, the read more links aren't either, all leading to 404 errors !
To go into more detail, here is what i have set up and what i have found out so far.
I have made a category blog, where articles are listed, each with a read more link in it, which works as expected.
Now each full text article should have its own slideshow and a couple of other modules, like a facts box in it.
Thats why, the article itself must show up as a menu item as well, so in the module manager i can select, that a specific slideshow module is used in this specific article only.
Therefore i have created menu items with the type of single article that links to the defined Article.
The main menu represents the page tree, each category blog has links to single articles as children. Some cat blog have cat blogs as children and then articles.
This setup works as expected, as long as i don't set the article menu item as a child of the category blog of the category the article itself belongs to.
Example:
MENU =
we offer(catblog) -> drinks(catblog) -> beer(singlearticle)
ARTICLEMANAGER
beer(category: drinks)
RESULT: wrong URL as above.
I can fix the error, by using rebuild in the menu manager, but thats only half way done. The menu URL is getting fixed, but than i have to go into the article itself, remove the read more and insert it back again, because the read private message doesnt get removed, even when i clear my cache. When i am done re-saving the readmore link, everything works like normal, until i save the article menu item the next time. Read Private Message bug is back again, up for another round.
I am a SuperUser, so i suspect i have all rights possible in joomla...
This must have something to do with Search engine friendly URLS (SEF), since it only occurs when i have SEF and mod rewrite turned on. I am using the default .htaccess file without any changes.
Here are some people with a similar problem, but no satisfying solution is given:
http://forum.joomla.org/viewtopic.php?t=802045
http://www.jevents.net/forum/viewtopic.php?f=31&t=19620
I have read about migration and update errors, leading to the same problem.
I migrated manually (sql backup, change of some path in config file) from local apache to 1&1 apache server, both running PHP 5.4, so i doubt that this is a migration issue Plus the problem also appears when i create new articles and menu items (under the parent category).
Changing aliases in both menu items and article itself does not have any effect.
I really hope somebody could give me a hint, or maybe even just confirm that this is a bug If this is designed behavior than whats the reason for it ?.
I am quite frustrated about it and i don't have that many options left since:
1. SEF is a MUST (to my client)
2. Changing the menu tree structure, so that the linked items are no longer children of their cat block parent destroys my breadcrumbs.
3. rebuild and change every menu item and article manually 2 to 3 times is time consuming, error prone, annoying and i don#t want to sell a product to a client like this, since they want to maintain it for themselves as far as posiible.
Your help is really appreciated !
Greets paad.
I'm fairly new to Share Point so forgive me if this is to easy for you guys, but I could not seem to find the answer anywhere and I am rather stumped.
I am currently trying to make a website to track if particular tasks go over their due date. I have a calculated column that leaves a DIV tag to the image of a red/yellow/green circle which is displayed by the javascript for a Content Editor Web Part (CEWP) made by Christophe on his site here:
http://blog.pathtosharepoint.com/2008/09/01/using-calculated-columns-to-write-html/
I was able to put his code into the CEWP and everything looks great when it is in a standard list.
But I want a web part version of this on the homepage for easy view. When I make the web part (of a view grouping by the image tag) and place on the main site all I see is the DIV tag! I made sure to put an identical CEWP on the homepage as well but i get as grouping:
+[columnName] : DIV>img title=blahblahblah>/DIV> (2)
Needles to say when I expand this it stays the same for all entries below
Any Ideas?
Thanks for your time :D
Nobody has responded, but I found the answer so hopefully this will save someone the hours of grief I had. This will seem ridiculous but just go with it.
In the calculated column instead of returning the type as text, return it as a currency. Sounds ridiculous BUT IT WORKS!!
I've got an ActiveReport which has a textbox populated at run time. The "cangrow" and "multiline" properties are both set to "true".
When I run the report on my machine, the report prints out fine with all of the text set at run time. IE: "Dear John, hello -- how are you..." There's only about 250 characters for this textbox.
However, one of the machines downstairs will only print the name of the textbox. IE: "txtVerbage". A blank report with "txtVerbage" in the middle of it, where the body (see above) should be.
Has anyone else had this experience? I've been banging my head against the wall for days now.
Thanks,
Jason
Its probably the timing of when you're setting the Field/TextBox value. Make sure you set it in the Format event of the section containing the control (e.g. Detail_Format). Using the BeforePrint or AfterPrint or one of the Report events can yield unpredictable results like this.
Also be sure you set the Field.DataValue property and not the Text property.
Some background information on this is in the articles below:
ActiveReports Architecture: Report Processing
ActiveReports Architecture: Events
Navigable documentation w/ TOC
Hope this helps!
Scott Willeke
GrapeCity
The data you access from downstairs is not there. That is why when you bind the data to the report, nothing appears. The reason you see txtVerbage is because that is what you called the text control and that was the default text there.
So you need to make sure that you are actually getting data.