I'm getting [INS-35180] Unable to check for available memory error while installing Oracle 19c in my laptop. I have tried to run DBCA as admin but still facing the same issue.
Error: [INS-35180] Unable to check for available memory.
Details: Additional Information:
Exception details - PRVG-1901 : failed to setup CVU remote execution framework directory "C:\Users\u720770\AppData\Local\Temp\InstallActions2023-02-08_06-14-10PM\CVU_19.0.0.0.0_u720770" on nodes "blrl52gm6g3"
Please select a different work area for the framework
blrl52gm6g3 : PRKN-1014 : Failed to execute remote command "C:\Users\u720770\AppData\Local\Temp\InstallActions2023-02-08_06-14-10PM\CVU_19.0.0.0.0_u720770\exectask.exe" on node "BLRL52GM6G3".Failed during connecting to service
blrl52gm6g3 : Failed during connecting to service
Version of exectask could not be retrieved from node "blrl52gm6g3"
I did below steps.
Downloaded Oracle 19c from Oracle site.
Extracted the zip file and copied it to C: drive.
Renamed the folder to 'db_home'
Ran setup file as administrator.
Please let me know how to resolve this issue to be able to install Oracle 19c.
Hello Can you check this path really exists and permissions on exectask.exe allow you to execute ?
C:\Users\u720770\AppData\Local\Temp\InstallActions2023-02-08_06-14-10PM\CVU_19.0.0.0.0_u720770\exectask.exe
or maybe it could be this bug
Bug 28747089 - DBCA Errors Out During Verification-- Unable to check for available memory (Doc ID 28747089.8) To BottomTo Bottom
or this
After applying Microsoft KB, DBCA Fails With [DBT-50000] Unable To Check For Available Memory (Doc ID 2807229.1)
SOLUTION
Make a note of the directory from which the OracleRemoteExecService is running; usually it is %temp% or c:\windows\temp. This information is available in the Service Control Manager.
Delete the OracleRemExecService.
Clean all the files under the directory from which OracleRemoteExecService was running, i.e. %temp% or c:\windows\temp.
It looks like I dont have enough admin privileges. I was able to install successfully after obtaining admin privileges.
I'm trying to install Jasper Report Server but I keep getting always the same error: during the post-install actions I get the following
Problem running post-install step. Installation may not complete correctly
Error running C:\Jaspersoft\jasperreports-server-cp-8.0.0/buildomatic/js-ant.bat
load-sugarcrm-db:[create-ks] Failed to create the keystore C:\Users\Paolo\.jrsks
BUILD FAILED
C:\Jaspersoft\jasperreports-server-cp-8.0.0\buildomatic\build.xml:377: The
following error occurred while executing this line:
C:\Jaspersoft\jasperreports-server-cp-8.0.0\buildomatic\bin\setup.xml:377:
Keystore may have been tampered with.
Total time: 1 second
I'm using the default installation and windows 11. I also tried running it in compatibility mode for Windows 7 but nothing changed. Can someone help me?
My problem was that js-install.sh created the keystore and placed it in a user directory, where it then couldn't access it again.
You could check the access rights for the folder the keystore is placed, and check if your user has the right ones.
Error message -
Install -Package : Exception 'System.AggeratteException' thrown when trying to add source 'https://api.nuget.org/v3/index.json'
Please verify all your online package are available.
One or more errors occurred.
Unable to load the service index for source 'https://api.nuget.org/v3/index.json.
An error occurred while sending the request.
The underlying connection was closed. an unexpected error occurred on a send.
Unable to read data from transport connection: an existing connection was forcibly closed by remote host.
Please download the related .nupkg file to your local machine and add/set the corresponding package source in VS > Tools > Options > NuGet Package Manager > Package Sources, then install it offline by using package manager console.
Jenkins unable to download xamarin dependency from dl.google.com / maven.google.com
Download failure reason: Unable to connect to the remote server
Project stack
Dotnet Xamarin android application
Error
Downloading https://dl.google.com/dl/android/maven2/com/google/firebase/firebase-core/16.0.1/firebase-core-16.0.1.aar to C:\Windows\system32\config\systemprofile\AppData\Local\XamarinBuildDownloadCache\googlefb-16.0.1/firebasecore.aar
C:\Windows\system32\config\systemprofile\.nuget\packages\xamarin.build.download\0.8.0\build\Xamarin.Build.Download.targets(52,3): error XBD001: Download failed. Please download https://dl.google.com/dl/android/maven2/com/google/firebase/firebase-core/16.0.1/firebase-core-16.0.1.aar to a file called C:\Windows\system32\config\systemprofile\AppData\Local\XamarinBuildDownloadCache\googlefb-16.0.1/firebasecore.aar. [D:\myfolder\Jenkins\workspace\projectname\project\project.Android\project.Android.csproj]
Download failure reason: Unable to connect to the remote server
Downloading https://maven.google.com/com/crashlytics/sdk/android/crashlytics-core/2.6.3/crashlytics-core-2.6.3.aar to C:\Windows\system32\config\systemprofile\AppData\Local\XamarinBuildDownloadCache\crashlyticscore-2.6.3.aar
C:\Windows\system32\config\systemprofile\.nuget\packages\xamarin.build.download\0.8.0\build\Xamarin.Build.Download.targets(52,3): error XBD001: Download failed. Please download https://maven.google.com/com/crashlytics/sdk/android/crashlytics-core/2.6.3/crashlytics-core-2.6.3.aar to a file called C:\Windows\system32\config\systemprofile\AppData\Local\XamarinBuildDownloadCache\crashlyticscore-2.6.3.aar. [D:\myfolder\Jenkins\workspace\projectname\project\project.Android\project.Android.csproj]
Download failure reason: Unable to connect to the remote server
I have tried configured corporate proxy in Jenkins. it works on the proxy configuration page but throws an error while building code. See in the below screenshot.
In Windows7 when I set MQSNOAUT=yes everything is ok and I can do whatever I want in WebSphere MQ. But in RedHat even after setting MQSNOAUT to yes I'm getting this error:
[root#RHEL6-135 bin]$ ll crtmqm
-rwxrwxrwx. 1 mqm mqm 41822 Oct 22 2015 crtmqm
[root#RHEL6-135 bin]$ crtmqm testqm
AMQ7077: You are not authorized to perform the requested operation.
[root#RHEL6-135 bin]$
Using mqm user I can create queue manager but cannot start it:
[mqm#RHEL6-135 bin]$ crtmqm testqm
WebSphere MQ queue manager created.
Directory '/var/mqm/qmgrs/testqm' created.
The queue manager is associated with installation 'Installation1'.
Creating or replacing default objects for queue manager 'testqm'.
Default objects statistics : 79 created. 0 replaced. 0 failed.
Completing setup.
Setup completed.
[mqm#RHEL6-135 bin]$ strmqm testqm
WebSphere MQ queue manager 'testqm' starting.
The queue manager is associated with installation 'Installation1'.
5 log records accessed on queue manager 'testqm' during the log replay phase.
Log replay for queue manager 'testqm' complete.
Transaction manager state recovered for queue manager 'testqm'.
The queue manager ended for reason 545284129, ''.
[mqm#RHEL6-135 bin]$
Unfortunately, there is no useful information in these log files:
/var/mqm/errors/AMQERR01.LOG:
----- amqxfdcx.c : 888 --------------------------------------------------------
03/14/2017 10:00:16 AM - Process(15859.1) User(mqm) Program(amqzmur0)
Host(RHEL6-135) Installation(Installation1)
VRMF(8.0.0.4)
AMQ6125: An internal WebSphere MQ error has occurred.
EXPLANATION:
An internal error has occurred with identifier 2080520F. This message is
issued in association with other messages.
ACTION:
Use the standard facilities supplied with your system to record the problem
identifier and to save any generated output files. Use either the MQ Support
site: http://www.ibm.com/software/integration/wmq/support/, or IBM Support
Assistant (ISA): http://www.ibm.com/software/support/isa/, to see whether a
solution is already available. If you are unable to find a match, contact your
IBM support center. Do not discard these files until the problem has been
resolved.
...
repeated 27 times!
/var/mqm/qmgrs/testqm/errors/AMQERR01.LOG:
03/14/2017 10:00:16 AM - Process(15840.4) User(mqm) Program(amqzmuc0)
Host(RHEL6-135) Installation(Installation1)
VRMF(8.0.0.4) QMgr(testqm)
AMQ5051: The queue manager task 'LOGGER-IO' has started.
EXPLANATION:
The critical utility task manager has started the LOGGER-IO task. This task has
now started 1 times.
ACTION:
None.
-------------------------------------------------------------------------------
....
-------------------------------------------------------------------------------
03/14/2017 10:00:16 AM - Process(15859.6) User(mqm) Program(amqzmur0)
Host(RHEL6-135) Installation(Installation1)
VRMF(8.0.0.4) QMgr(testqm)
AMQ5037: The queue manager task 'DEFERRED_DELIVERY' has started.
EXPLANATION:
The restartable utility task manager has started the DEFERRED_DELIVERY task.
This task has now started 1 times.
ACTION:
None.
-------------------------------------------------------------------------------
The mqm user is sudoer and the following is a part of my /etc/group file:
root:x:0:root, mqm, bin
adm:x:4:root,adm,daemon, mqm, mquser
mqm:x:500:root, mqm
mquser:x:502:mqm
... regardless all these, I think having MQSNOAUT variable that is set to yes should be enough to work with WebShpere MQ using any user. Maybe something related to RedHat caused the problem.
BTW, searching for The queue manager ended for reason 545284129, ''., I couldn't find any solution.
Any thoughts?
UPDATE
Having done chmod -R 6550 on /opt/mqm/bin, now I can start queue managers and create queue, channel, ... using IBM MQ's command line binaries. For more convenient, however, still I can't use MQ Explorer, because when I run MQExplorer I get the following error:
[mqm#RHEL6-135 bin]$ MQExplorer
No protocol specified
MQExplorer: Cannot open display:
No protocol specified
No protocol specified
MQExplorer: Cannot open display:
MQExplorer:
An error has occurred. See the log file
/var/mqm/IBM/WebSphereMQ/workspace-Installation1/.metadata/.log.
[mqm#RHEL6-135 bin]$
Running it with sudo I get this error:
[mqm#RHEL6-135 bin]$ sudo MQExplorer
[sudo] password for mqm:
/opt/mqm/java/jre64/jre/bin/java: error while loading shared libraries: libjli.so: cannot open shared object file: No such file or directory
(process:4451): Gtk-WARNING **: This process is currently running setuid or setgid.
This is not a supported use of GTK+. You must create a helper
program instead. For further details, see:
http://www.gtk.org/setuid.html
Refusing to initialize GTK+.
[mqm#RHEL6-135 bin]$
and the /var/mqm/IBM/WebSphereMQ/workspace-Installation1/.metadata/.log is as follows:
!SESSION 2017-03-15 16:41:52.369 -----------------------------------------------
eclipse.buildId=unknown
java.fullversion=JRE 1.7.0 IBM J9 2.7 Linux amd64-64 Compressed References 20150630_255653 (JIT enabled, AOT enabled)
J9VM - R27_Java727_SR3_20150630_2236_B255653
JIT - tr.r13.java_20150623_94888.01
GC - R27_Java727_SR3_20150630_2236_B255653_CMPRSS
J9CL - 20150630_255653
BootLoader constants: OS=linux, ARCH=x86_64, WS=gtk, NL=en_US
Command-line arguments: -os linux -ws gtk -arch x86_64
!ENTRY org.eclipse.osgi 4 0 2017-03-15 16:41:54.516
!MESSAGE Application error
!STACK 1
org.eclipse.swt.SWTError: No more handles [gtk_init_check() failed]
at org.eclipse.swt.SWT.error(SWT.java:4423)
at org.eclipse.swt.widgets.Display.createDisplay(Display.java:925)
at org.eclipse.swt.widgets.Display.create(Display.java:909)
at org.eclipse.swt.graphics.Device.<init>(Device.java:156)
at org.eclipse.swt.widgets.Display.<init>(Display.java:507)
at org.eclipse.swt.widgets.Display.<init>(Display.java:498)
at org.eclipse.ui.internal.Workbench.createDisplay(Workbench.java:691)
at org.eclipse.ui.PlatformUI.createDisplay(PlatformUI.java:162)
at com.ibm.mq.explorer.ui.rcp.internal.base.RcpApplication.start(RcpApplication.java:88)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:354)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:181)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:95)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:56)
at java.lang.reflect.Method.invoke(Method.java:620)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:636)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:591)
at org.eclipse.equinox.launcher.Main.run(Main.java:1450)
at org.eclipse.equinox.launcher.Main.main(Main.java:1426)
The log/stacktrace looks like a catch-all exception handling. I didn't yet completely digged into this error but maybe it is also caused by some permission problems. For example, maybe some authorization errors are raised when MQExplorer tries to load it's components from mqm's sub-directories! However, running chmod -R 6550 on some related paths didn't solve the problem.
Setting MQSNOAUT=ANYVALUE only turns off MQ OAM if it is set at the time the queue manager is created. It results a few lines being omitted from the qm.ini file for the queue manager you create while it is set.
If OAM is turned off it means only that any user connecting to the queue manager will have full authority.
The queue manager itself on Unix still needs to run under the mqm userid.
I noted that you showed the following permissions on the crtmqm binary:
-rwxrwxrwx. 1 mqm mqm
This is not correct, the MQ install on Unix has many of the files with setuid permission because the permissions on the files that are created under /var/mqm/qmgrs, /var/mqm/log, /var/mqm/sockets are very important. From the research I did the 545284129 and 2080520F errors are related to file permissions. I would suggest you reset the permissions back to what they previously were, if you do not know then I would suggest you remove the IBM MQ software and reinstall. For reference below is the normal permissions on the crtmqm binary:
-r-sr-s--- 1 mqm mqm
Once the IBM MQ binary permissions are corrected I would suggest that you use dltmqm to delete your queue manager and ensure that nothing remains related to that queue manager name under /var/mqm/qmgrs, /var/mqm/log, /var/mqm/sockets, and in the /var/mqm/mqs.ini file.
Once it is cleaned up, create it again as the mqm user and try starting it.
I would suggest that you try not to disable security and instead set things up with proper permissions. Even if this is a development environment, it is much better to get things working with security enabled. When you develop with security disabled you end up needing to troubleshoot why things are not working later when security is turned on in a real environment.
Take a look at my answer to question "Provide anonymous access to IBM WebSphere MQ" for some more information on how to keep security enabled as well as disabling things if you want to continue down that path.