I'm trying to set up some automated tests using the Robot Framework's pybot script that allows you to execute Robot tests via shell. pybot, for those not familiar, is installed along with the Robot Framework to /usr/local/bin, and simply does:
#!/usr/bin/python
import sys
from robot import run_cli
run_cli(sys.argv[1:])
Effectively allowing you to evoke it "natively" from bash rather than python. Now, the way I'm trying to call pybot is as follows:
cd /var/www/parsingdev/meTypeset/tests && for file in ./*.txt; do pybot -d $(echo "/var/www/parsingdev/robot/"$(echo $file | sed -e "s/\.\///g" -e "s/\.txt//g")) $file; done
If I run this with sudo bash -c and wrap it all in single quotes, it works fine. If I save it to /opt/robottest.sh with a #!/bin/bash declaration as a first line and the command as the second line, and call it from the shell, it also works fine. However, none of the expected output files from the Robot tests are created when I use either of those methods to run it via root's cron, so something's not working.
I don't get it, though -- if I just do sudo env, it shows that /usr/local/bin is in the PATH, so it shouldn't be failing to find pybot, and otherwise I don't know why running it as sudo should be different from running it from root's crontab.
Thoughts appreciated!
Environment for root cron (or cron in general) is not identical to that when running a root bash. I suspect that pybot is not in the PATH used by cron.
In general, you want to make sure all paths are fully-qualified or PATH explicitly declared for cron tasks.
Related
I was trying to get a crontab working on my Raspberry PI and I think I messed up my environment variables. I can execute a file from the GUI by right-clicking and choosing execute. However I cannot get the same file to run from command line. I can use ls to see the file (ChromeTab.sh), but when I type ChromeTab.sh, I get "bash: ChromeTab.sh: command not found".
I think I messed up my environment variables when I put this in the crontab.
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
I followed the examples in Script doesn't run via crontab but works fine standalone.
Any idea what I'm doing wrong?
UPDATE:
OK,
Let me clarify what efforts I took on my part BEFORE posting my question on stackoverflow before getting anymore downvotes.
First of all thanks S. Adam Nissley for your suggestions.
In answer to your steps listed above.
Running this from home path, or fully qualified path does Not work as stated.
Error: bash: ChromeTab.sh: command not found
./ChromeTab.sh
I have also ensured read/write and execute permissions on the file with
chmod +x ./ChromeTab.sh
Also, my bash script starts off with the following shebang
#!/bin/sh
So, what i'm trying to say is, regardless of using crontab or not the issue at hand is that I can not even execute the script from command line. This started happening after I was messing around with the environment variables in the crontab. I'm looking for a way to revert to the situation where I can at least run/execute bash commands from the terminal.
The only way I can effectively execute this script is (right-click execute) through the GUI.
Assuming you are in the same directory as your script, you should just be able to enter
./ChromeTab.sh
If it does not execute, make sure it is executable with the command
chmod +x ./ChromeTab.sh
Or
chmod 755 ./ChromeTab.sh
And if it still won't execute, make sure it has an appropriate hashbang on the very first line of the script like #!/bin/sh or #!/bin/bash
When you add it to your crontab, make sure it has the full path like
/home/pi/bin/ChromeTab.sh <br/>
EDIT: Default PATH and SHELL for Raspbian
You can check your PATH and SHELL environmental variables from the command line as follows:
echo $SHELL
echo $PATH
The default PATH for Rasbian is:
/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
And the default SHELL is:
/bin/bash
So if you need to set those it is as simple as:
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/games:/usr/games
SHELL=/bin/bash
If you are having other issues with your environment, you may want to disable some of your local settings to see if the problem is in your profile. You can list all files with ls -a, which includes hidden files. Raspbian typically has a .bashrc and a .profile in each user's home directory. To disable them simple rename them:
mv .bashrc .bashrc_disabled
mv .profile .profile_disabled
If that solves the problem, you can inspect the files and make the necessary corrections before renaming them back to their original names.
I have a Perl program on server_B which uses Perl DBI and 5.010 and runs fine from the server_B terminal. I run it from a shell script which first prepares some arguments and then passes them to the Perl program, all works fine.
I need to run a shell script on server_A that will execute that script on server_B. This is because the Perl program creates several files that I want to SFTP back over to server_A. This is the script I'm running on server_A:
ssh server_B <<- EOF
perl/update.sh
EOF
There is some strange behavior which I'm trying to understand:
The script (update.sh) on server_B runs mysql, which is not installed on server_A (which is why I have to do this whole thing.) If I try to run it on server_B as-is, I can call mysql just like that. But when I run the above script (on server_A) to ssh into server_B and run that script, it doesn't recognize mysql unless I change the file (on server_B) to call the full path /opt/mysql/client/bin/mysql (even though that file is already on server_B with mysql installed) Does this mean server_B is picking up on the PATH variable from server_A instead of using my PATH variable from server_B? Is it trying to run my programs from server_A on the files on server_B? How and why??
If I make the change above it executes the script, but when it hits Perl it says
Perl v5.10.0- required - this is only v5.8.8
Again, 5.10 works fine on server_B but the version of Perl on server_A is 5.8.8.
So I got rid of use 5.010; because it actually wasn't necessary, but then I have a similar problem with my modules (DBI and DBD::mysql). I get:
Can't locate DBI.pm in #INC (#INC contains.. [my Perl PATH from server_A])
at perlfile.pl line 4
I was expecting the ssh heredoc call to update.sh (from server_A) to run exactly as update.sh does if I call it on server_B, but instead it seems like it's trying to use my programs from server_A on server_B, which I find weird. Can anyone help me understand why it's happening? I feel like I'm misunderstanding something fundamental about how ssh works.
server_A is AIX with ksh
server_B is AIX with bash
Edit - since some of you voted to the effect that I haven't done my research, here's what else I've tried. I didn't mention because I don't understand them fully, these are just guesses based on other SO posts & hunches. It'd be disingenuous if I gave the impression I knew what I was talking about.
If this is a duplicate, which question should I be looking at? If this is a "just read the manual situation", which one? What should I look for?
Read man ssh looking for clues related to environment variables, didn't find anything I understood
Tried running with -t
Tried running with -t -t
Did log in remotely with ssh and manually running it - this DOES work
Sourced my .bash_profile in the update script
Tried to re-assign PATH as the remote server's PATH when ssh
Tried using a different delimiter for the heredoc
Tried < instead of <<
Tried without the "-"
Edit 2 with Saigo's help below I determined that when in interactive ssh, if I echo $PATH I do get the target server's $PATH, but in a shell script I don't. That led me to this:
https://serverfault.com/questions/643333/different-bash-path-variables-when-using-ssh-script-vs-interactive-ssh
where I found out that scripted ssh doesn't call .bashrc, but interactive ssh does. So it looks like I was on the right track trying to source .bash_profile inside the scripted SSH heredoc, just need .bashrc not .bash_profile - however I don't have a .bashrc on the target server. I do have .profile but when I source that, I get an error stating it's for interactive bash sessions only. So now I'm just trying to find whatever file would contain my $PATH variable because it's apparently not .bashrc as there isn't one in there.
Edit 3 - tried hard-coding the PATH variable into a file and sourcing that and even then when I echo $PATH I get the origin server's PATH variable. It is reading the file in correctly, I also assigned another test variable and echoed that as part of the script. I tried sourcing /etc/profile and no luck.
I found a solution that works perfectly. I wasn't able to get it to work with ~/.bashrc, ~/.bash_profile, or ~/.ssh/rc but still not sure why it's not picking up my environment variables even with sourcing these.
Since it works when I manually ssh in and then run the commands one-by-one, I used these arguments to run ssh in a forced interactive login.
ssh server_B bash --login -i "~/perl/update.sh"
See these for more:
https://superuser.com/questions/564926/profile-is-not-loaded-when-using-ssh-ubuntu
https://unix.stackexchange.com/questions/46143/why-bash-unable-to-find-command-even-if-path-is-specified-properly
Hope this is useful for someone in the future. Thank you for your assistance Saigo.
I'm trying to write a script shell (Mac OS X) for deploying my Awestruct site within a launch agent.
So, I have to generate site before deploying it. The command to generate site is :
awestruct -g
My script is myscript.sh :
cd /my/site/structure/base/directory
awestruct -g
This script is launched by the system when an event occurs.
But the problem is it doesn't know about awestruct...
My awestruct program is a part of my ruby installation and is added to my PATH variable.
When I run the script manually, it works (because it's my user who is lauynching it)
When the system detect the event and runs the script, it results as :
awestruct: command not found
The problem is the PATH...
If it works manually, then in the same prompt where it works, run command:
which awestruct
That will print the program file with full path, let's assume /usr/local/bin/awestruct, but use whatever it really is. Then use that in your script, for example:
cd /my/site/structure/base/directory
/usr/local/bin/awestruct -g
This assumes that there are no other environment variables, only defined for your account, which awestruct needs. If there are, then find out what they are, and add them to your script before running awestruct, for example with line:
export AWESTRUCT_ENVIRONMENT_VARIABLE=foobar
(Note: When you run the script normally like any program, that will not change the parent shell environment.)
You can also add the path to the executable in the PATH of the user that run the script and gets the error.
You could try something like :
$ su - <user_that_run_the_script>
$ echo "export PATH=$PATH:$(which awestruct)" >> ~/.bash_profile
$ source ~/.bash_profile
(For Linux users, use ~/.bashrc instead of ~/.bash_profile)
I am attempting to create a shell script using Node.js similar to packages like express and mocha. My initial test reported command not found so I backed the script to the following:
#!/usr/bin/env node
console.log("printing stuff");
The above should just output "printing stuff" when ran; however, that too doesn't work.
I'm attempting to execute the script via ./script in the directory of the file in order to ensure it's not a pathing issue. Attempting to execute under a privileged state (i.e. sudo) yields the same results/error message.
Any idea what I need to do?
When you shebang (#!) /usr/bin/env node, you are saying "look for a program called node on my PATH". If doing node -v works, as #Ryan says, the shebang should work fine. Any chance you have a shell alias or shell function named node? That could be giving you the illusion that your PATH is correct even when it is not. But essentially, just make sure the directory where the node binary lives (the bin directory under your node install) is on your PATH environment variable, and things really should work at that point.
export PATH=/usr/local/node/bin:$PATH
Figured out my issue. I made the shell script but forgot to set execute permissions onto the file. doing a chmod a+x script resolved the issue.
I tried activating a VirtualEnv through a shell script like the one below but it doesn't seem to work,
#!/bin/sh
source ~/.virtualenvs/pinax-env/bin/activate
I get the following error
$ sh virtualenv_activate.sh
virtualenv_activate.sh: 2: source: not found
but if I enter the same command on terminal it seems to work
$ source ~/.virtualenvs/pinax-env/bin/activate
(pinax-env)gautam#Aspirebuntu:$
So I changed the shell script to
#!/bin/bash
source ~/.virtualenvs/pinax-env/bin/activate
as suggested and used
$ bash virtualenv_activate.sh
gautam#Aspirebuntu:$
to run the script .
That doesn't throw an error but neither does that activate the virtual env
So any suggestion on how to solve this problem ?
PS : I am using Ubuntu 11.04
TLDR
Must run the .sh script with source instead of the script solely
source your-script.sh
and not
your-script.sh
Details
sh is not the same as bash (although some systems simply link sh to bash, so running sh actually runs bash). You can think of sh as a watered down version of bash. One thing that bash has that sh does not is the "source" command. This is why you're getting that error... source runs fine in your bash shell. But when you start your script using sh, you run the script in an shell in a subprocess. Since that script is running in sh, "source" is not found.
The solution is to run the script in bash instead. Change the first line to...
#!/bin/bash
Then run with...
./virtualenv_activate.sh
...or...
/bin/bash virtualenv_activate.sh
Edit:
If you want the activation of the virtualenv to change the shell that you call the script from, you need to use the "source" or "dot operator". This ensures that the script is run in the current shell (and therefore changes the current environment)...
source virtualenv_activate.sh
...or...
. virtualenv_activate.sh
As a side note, this is why virtualenv always says you need to use "source" to run it's activate script.
source is an builtin shell command in bash, and is not available in sh. If i remember correctly then virtual env does a lot of path and environment variables manipulation. Even running it as bash virtualenv_blah.sh wont work since this will simply create the environment inside the sub-shell.
Try . virtualenv_activate.sh or source virtualenv_activate.sh this basically gets the script to run in your current environment and all the environment variables modified by virtualenv's activate will be available.
HTH.
Edit: Here is a link that might help - http://ss64.com/bash/period.html
On Mac OS X your proposals seems not working.
I have done it this way. I'am not very happy with solution, but share it anyway here and hope, that maybe somebody will suggest the better one:
In activate.sh I have
echo 'source /Users/andi/.virtualenvs/data_science/bin/activate'
I give execution permissions by: chmod +x activate.sh
And I execute this way:
`./activate.sh`
Notice that there are paranthesis in form of ASCII code 96 = ` ( Grave accent )
For me best way work as below.
Create start-my-py-software.sh and pest below code
#!/bin/bash
source "/home/snippetbucket.com/source/AIML-Server-CloudPlatform/bin/activate"
python --version
python /home/snippetbucket.com/source/AIML-Server-CloudPlatform/main.py
Give file permission to run like below.
chmod +x start-my-py-software.sh
Now run like below
.start-my-py-software.sh
and that's it, start my python based server or any other code.
ubuntu #18.0
In my case, Ubuntu 16.04, the methods above didn't worked well or it needs much works.
I just made a link of 'activate' script file and copy it to home folder(or $PATH accessible folder) and renamed it simple one like 'actai'.
Then in a terminal, just call 'source actai'. It worked!