So I'm trying to make the switch from Bootstrap to Foundation , and I'm attempting to follow the instructions on this page (as I'm trying to install Foundation with Sass), but the instructions on the site are rather unclear to me - I've installed Git, Ruby and NodeJS but every time I get to the step
foundation new MY_PROJECT
I keep getting the error "Can't find Git, you can install it from http://git-scm.com/downloads except I've already installed it (and reinstalled it, twice actually) and I have no idea what to do to fix it. Perhaps someone could lay out the instructions from start to finish in more concrete terms so that I can understand?
Strangely enough, I reinstalled Git and found that you have to adjust Git's PATH option so that it runs Git from the Command Prompt (essentially, pick the second option on the "Adjusting your PATH environment" screen when installing Git).
Not entirely sure why I didn't realize that before, but it fixed the problem for me!
It is probably some kind of path issue.
You could also run Git Bash that was installed when you installed Git and then execute the foundation new MY_PROJECT command from there. It worked for me :)
Related
I'm frustrated. I'm a total beginner in this (TYPO3), know well about HTML/CSS though but all the info I found on the web reads like Chinese for me. Like that one: http://mac-dev-env.patrickbougie.com/graphicsmagick/
I have no clue what that means!
I've downloaded GM, extracted the zip and double-clicked the configure file. The installation finished without any problems (as far as I can tell).
So here's the ting: can anybody please tell me, how this sort of installation is suppossed to be completed? I need it from the very beginning, actually from unpacking the zip.
Do I have to have another program, like this terminal program on the Mac, where you have to type in command lines? Do I have to write or edit code somewhere? Do I need to create folders? Where, in the TYPO3-Backend, can I check if it even works?
TYPO3 is installed and it works perfectly so far. THANKS A LOT! :)
PS: I really like to learn this (!), but my head is bumping right now :(
Easy way:
If you want to "just install" GM I suggest you to use one of OS X package managers like homebrew or macports. They can simplify configuration, building and installation process for you. So you'll only need to open Terminal and type (depending on chosen package manager):
brew install graphicsmagick or port install graphicsmagick
To verify that your installation is successful open Terminal and type gm version, as result you should see version and other details of your installation.
Fundamental way:
If you want learn how to build and install GM from sources, I recommend you to start reading official documentation. And then, by the way, read about "Make" and other tools used in build process.
As #Oles Savluk pointed easiest way to install such stuff is using homebrew. When you'll install it already, open new terminal window and use command which gm to find the path it will be i.e.: /usr/local/bin/gm - copy/write it and use in the TYPO3's Install Tool in proper place.
I recently installed railsinstaller on my computer, but have noticed that the installation for git that came with the application is old. I wanted to install it through the git installer, but it never showed me where I would like for the location of git to be at. My other solution is to upgrade it through the command prompt without using the git installer. How do I do this? Which commands would I have to use in the command prompt terminal?
Installing software from the command prompt isn't an easy task on Windows. First, you will need to find out what technology was used to create the installation package. Then you need to download a (UI based) tool which can modify the installation package to stop asking questions and just do what you want. It's certainly possible ... if you can spend a couple of hours or days to find out how.
Now the reason why the git installer isn't asking is probably because it detects an existing install and wants to upgrade it - since the "new" place must be the old place, no question is asked. To "fix" this, you can try to deinstall Git (Control Panel -> Installed Software -> Remove). When you run the installer again, it should give you more options.
If you just want to update the command line tools, you can also try to unpack the installer or install on a second computer. That should give you the git.exe plus all the DLLs and scripts which you can then copy manually. But Git on Windows also install a MINGW environment with a shell and to update that, you probably have to run the installer so it can make the necessary changes to the registry.
I have researched this and found answers on SO on this topic yet remain confused.
Trying to get started with Git. I'm new to shell scripting too so hopefully after this I'll be more familiar with it.
I'm reading this page about how to get up and running with Git: http://git-scm.com/book/en/Getting-Started-Installing-Git
I created a directory on my desktop called "git" and navigated to it in the terminal. With my level of experience in shell scripting this was a victory. Then, following a blog post on how to download fromt he terminal ran this command:
curl -O http://git-scm.com/download
That worked, or at least a new file was added to the "git" directory that I created.
Reading down the instructions one is told that "To install Git, you need to have the following libraries that Git depends on: curl, zlib, openssl, expat, and libiconv"
OK. Um. How? I did read some blog posts and SO answers on how to do this but failed. The first one for example - type zlib and hit enter - command not found? How do I either check if it's already installed or how do I install it? What about the others?
I tried following this blog post: http://www.neuraladvance.com/using-open-source-libraries-on-mac-os-x.html
I typed:
./configure
make
sudo make install
Wasn't even sure what to expect. The first two commands said not found the last one asked me for a password.
I then tried ./configure --help
Was then told "No such file or directory"
Needless to say I don't know what to do next. How do I install the libraries on a Mac using the terminal? curl, zlib, openssl, expat, and libiconv
I'm pretty sure all those libraries are preinstalled on your Mac.
If not, installing Xcode (free on the AppStore) would do the trick.
Xcode actually comes with git (but not the latest version) so if you install Xcode you don't need to install git separately.
To answer your question more generally, you might want to install Homebrew.
It's a command line tool to install software and libraries and it's pretty easy to use.
It's great that you are discovering the shell. You should read some tutorials for beginners. If you like it, you will learn very fast and in a few weeks, you will understand exactly why the command you tried didn't work. Have fun learning!
As Simon suggested you should install Xcode, however the CLI tools are not installed automatically. They must be downloaded through Xcode's, preferences. In Preferences click the Downloads tab then install next to Command Line Tools.
If any of the required tools are not automatically installed with Xcode, Homebrew is a great, easy to use, utility that can install nearly any UNIX or Linux command with the following syntax:
brew install <SomeAppName>
The Homebrew website has easy to follow instructions for setting it up initially. So if anything you need is missing try using that.
In Xcode 5, to download Command Line Tools, choose Open Developer Tool under "Xcode", then More Developer Tools> from the sub Menu. This takes you to an Apple web page - you'll need a Developer username/password to get to the Downloads page.
Choose the right CLT for your system, download and install from the dmg/pkg.
I have to confess I am not an expert in Mac OS but I am trying to install Cappuccino. I ran the script and the following files are now in the "narwhal" subdirectory. Trouble is, I have no idea what to do next. There doesn't appear to be an install executable, and no icon has appeared to invoke the development environment. Any help is appreciated.
These are the downloaded files:
I'm assuming you've downloaded the package on the website, there's a shell script. In the terminal run the bootstrap.sh file:
./bootstrap.sh
Then, you're set to install Cappuccino.
Inside the Cappuccino directory type:
jake install
or sometimes
jake sudo-install
is required. (it'll complain about permissions if you need to use sudo-install)
That will install Cappuccino itself.
To create a new cappuccino project you'll need to use the "capp" tool
capp gen MyNewProjectName
or capp --help
will tell you how to use some of the more advanced features of the capp tool.
This will give you a blank project where you can get to work.
There are other tools you can (and will want to) use when you're ready to deploy, but we can get to those when the time comes.
Additionally, the mailing list is very helpful when it comes to these kinds of questions, and it monitored much more closely than SO. :)
For what I've read I need Python-Dev, how do I install it on OSX?
I think the problem I have, is, my Xcode was not properly installed, and I don't have the paths where I should.
This previous question:
Where is gcc on OSX? I have installed Xcode already
Was about I couldn't find gcc, now I can't find Python.h
Should I just link my /Developer directory to somewhere else in /usr/ ???
This is my output:
$ sudo easy_install mercurial
Password:
Searching for mercurial
Reading http://pypi.python.org/simple/mercurial/
Reading http://www.selenic.com/mercurial
Best match: mercurial 1.5.1
Downloading http://mercurial.selenic.com/release/mercurial-1.5.1.tar.gz
Processing mercurial-1.5.1.tar.gz
Running mercurial-1.5.1/setup.py -q bdist_egg --dist-dir /tmp/easy_install-_7RaTq/mercurial-1.5.1/egg-dist-tmp-l7JP3u
mercurial/base85.c:12:20: error: Python.h: No such file or directory
...
Thanks in advance.
I was struggling with this problem all day today.
I eventually discovered a site that claimed that all one needed to do was to reinstall Xcode, or install the latest version (4.3.2, as of this writing).
So I tried that. It did not help; not on its own. But then I went a step further: I fired up Xcode.app, and once I had done that, I opened the Xcode..Preferences menu item, and then go to the Downloads tab, and say that you want to install the "Command Line Tools"
Once I did that, and then re-ran easy_install (in my case I was trying to "easy_install dulwich" to satisfy a hg-git dependency), it was able to properly find Python.h for me.
Might depend on what version of Mac OSX you have, I have it in these spots:
/Developer/SDKs/MacOSX10.5.sdk/System/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5/Python.h
/System/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5/Python.h
Also I believe the version of python that comes with Xcode is a custom build that plays well with xcode but you have to jump through some hoops if you use another dev environment.
Are you sure you want to build Mercurial from source? There are binary packages available, including the nice MacHg which comes with a bundled Mercurial.