Vimperator (Firefox) macro to copy text - firefox

I am using Vimperator 3.8.1 with Firefox 25.0. I have created a macro to solve a problem (details below), and this macro fails at the following point.
Vimperator Macro e:
/foo<Return>cv<Down>y
My macro searches for a string ('foo') in the page, then goes into caret mode, then into the visual mode, and then selects one line of text and then copies that text.
My problem is that when I record this macro, the one selected line gets copied, but when I play it (using play command), nothing gets copied onto the clipboard. Thus, due to this, I am unable to retrieve that info in an automated manner. I don't know what to Google for in this case, so I posting this here on SO.
I will be highly obliged if someone can also explain why this happens the way it does. Please also let me know if something is not clear.
Problem Details
I am using Vimperator 3.8.1 with Firefox 25.0. I have a lot of tabs (about 300 tabs) which contain similar information (only one line is different on each tab). I want to copy that single line from each tab and collate it in one place. That one line begins with the string 'foo' in every case, and each of the 300 tabs has links that can be incremented using Ctrl+a in Vimperator (i.e. ...page=1, ...page=2)
How I plan to accomplish this is as follows. I have an online notepad open in tab 1, and the very first of my 300 tabs open in tab 2. I copy my single line from tab 2, and paste it into tab 1, then go back and increment tab 2 to point to the next tab. I will repeat this macro 300 times to get all the info.
Thus my complete macro will look like
/foo<Return>cv<Down>y<C-PageUp><C-t>p<C-PageDown><C-a>

Related

RStudio tab functionality working differently

On my desktop computer, tab quickly moves a comment or command across over 4 spaces in rapid succession. On my laptop, tab brings up a message that says "(No matches)", then when I hit tab again, it moves 4 spaces, then another message, then another 4 spaces. I cannot quickly move text to the right. I imagine this is a setting I can turn on and off but I cannot figure it out.
I am using 0.99.903
Odds are you need to tweak two settings:
Insert spaces for tab
Use tab for multiline autocompletions
You can find each in the Global Options pane:

Is there a way to indent lines (not format them) in Visual Studio?

In Eclipse, there are two distinct features: one to format a selection, one to just indent the lines, see e.g. Difference between Ctrl+Shift+F and Ctrl+I in Eclipse. I found the format feature in Visual Studio but how can I actually just indent the lines? Is there some built-in command for that or possibly a 3rd party add-on?
Note: I have asked a couple of friend that use VS daily and they all tried to persuade me that I am looking for the format feature. No I'm not. I tried to live with it for a while and it is just a different feature. I am after the indent/reindent only.
EDIT: I am looking for a clever indent, sometimes called reindent, which is different to just pressing Tab or Shift+Tab (increase/decrease indent level). The indent feature in Eclipse behaves like this:
It places a beginning of current line at the right position, no matter where that line was starting before. So instead of thinking whether you need to increase or descrease the indent level (Tab or Shift+Tab), you just invoke the indent command and it will do the right thing.
Invoking the indent command on an empty line places the caret at the right position for the user to start typing.
It never influences any character beyond the first non-whitespace character.
If you just want to indent some lines, you can
Select them.
Press Tab.
To un-indent them, replace the second step to: Shift+Tab.
You can find more VS shortcuts here.
There are toolbar buttons for this, with wonderfully inconsistent labels (at least in the Visual Studio 2013 I'm using)...
In the "Text Editor" toolbar (in my default setup), I have to buttons whose tooltips are:
"Decrease Line Indent"
"Increase Line Indent"
In the "Customize" dialog, on the "Commands" tab (with "Toolbar" set to "Text Editor") they appear in the list as:
"Line Unindent"
"Line Indent"
And finally, if you press the "Add Command..." button (on the "Customize" dialog) to produce the "Add Command" dialog and select the "Edit" category, you'll see these two entries:
"Outdent"
"Indent"
As far as I can tell, these are all the same two commands, which should do what you want.
They also appear in the Edit -> Advanced menu, at the very bottom.
----- Edit -----
I believe you might be able to turn off all of the "formatting" actions except for indentation, so that when you use the "auto-format" command, only the indentation is "formatted" for you. (Of course this prevents you from ever using the rest of the formatting features without turning them on again, but if you don't use them, this might work!)

Smart indent effect on completion (intelliSense) sessions

I am writing a Visual Studio extension which provides intelliSense for a certain content type.
The problem that I am facing now is the effect of "Auto Indent" that Visual Studio provides on empty lines when user types a character.
Here a completion session started on an empty line (over virtual spaces):
Notice the tab symbols on the other lines and no tab on the line with caret on it.
Now when use starts typing, VS automatically and correctly adds necessary tab characters to the line:
Now the problem is those Added tabs apparently become part of the user input and as a result CurrentSession.SelectedCompletionSet.SelectBestMatch() or Filter() method cannot find the current item which starts with "C" here (thinking user has typed \t\tC instead).
If I start the session on anywhere else which does not require auto indent everything works fine.
Any idea?
Edit (more information): I used a code flow very similar to:
Ook here
vsLua here
vsClojure here
In Lua and Clojure you wouldn't face this problem because they never provide intelliSense on virtual spaces (meaning they always start after a certain set of characters) and if you start after a character virtual spaces are already turned into real spaces.
Ook on the other had has the same problem.
Revised Answer:
Ah, I see. I interpreted your question thinking that you were referring to completion triggering via typing, not from the explicit command. If you enable "show whitespace" for the C# editor, you can see what we do here: when you trigger the "show completion" command, we explicitly realize the whitespace so you're no longer floating around in virtual space. You should probably do this as well. (Alternatively, you could detect the scenario and fix it up on the first typing by adjusting your ApplicableTo span, but that's probably not worth the trouble.)
You can get the whitespace that should be inserted from IEditorOperations. So MEF import an IEditorOperationsFactoryService, and then do:
var editorOperations = editorOperationsFactoryService.GetEditorOperations(textView);
var whitespace = editorOperations.GetWhitespaceForVirtualSpace(textView.Caret.Position.VirtualBufferPosition);
if (whitespace.Length != 0)
{
textView.TextBuffer.Insert(textView.Caret.Position.BufferPosition, whitespace);
}
(Funny aside: as I answered this, I was curious to see how we handled this in the Roslyn C# and VB editors. The answer was "not", but filtering still worked by pure luck later in the code.)
Original Answer:
I suspect by your description of the problem that you are implementing your completion like this: you know a character is about to be typed (either via a keyboard filter or IOleCommandTarget) and you trigger an ICompletionSession, where the tracking span is an empty span on the current caret position.
The best approach to fixing this is to not trigger the session before the key is pressed and goes into the editor, but rather after it. This is what we do in the Roslyn implementation for C# and VB completion. Then, when you are in your AugmentCompletionSession call and creating your CompletionSet, compute the "applicable to" span which consists of the non-whitespace characters around your caret. The easiest way to compute this might just be to call GetWordExtent from the text structure navigator.
This allows for other scenarios to work right. Consider scenarios where the user types C, presses escape, and then continues to type your identifier. If you want to trigger completion again, you'd have to do the math to ensure that the "C" is counted as part of your span anyways.

xcode shortcuts - add text/ limit text till page guide

I want to insert a piece of text using a keyboard shortcut or single click instead of copying ans pasting the whole time. Can I do that in Xcode?
also, I have a page guide at x=80 in my xcode editor. Can I limit all my statements till that vertical line?
i.e., if I am writing a new line, it should automatically inset a new line character when that page guide is reached. Also, any old code that I wrote I might want to wrap that up within x=80.

Fastest way to "jump back" to a file in TextMate?

Often, when I am reading code or debugging, I want the ability to quickly jump around files. I especially want to "go back" to where I was. I know about "Command+T", "Command+Shift+T", and, bookmarks. But, I cannot figure out a way to jump around files quickly.
UPDATE: I do not think I my question was clear enough judging by two answers given. Specifically, I am looking for a way to "jump back" to where I was in a file. I know how to navigate in TextMate (in general). I want to know if TextMate has a "jump back" key binding.
It's subtle.
The command-T thing has the files listed in Most Recently Used order.
So, you can go command-T return to get back to your last file real quick. At first I couldn't find it either.
I don't think there's a go to last edit location as there is in, say, IDEA/RubyMine.
Courtesy of MacroMates.com
2.3 Moving Between Files (With Grace)
When working with projects there are a few ways to move between the open files.
The most straightforward way is by clicking on the file tab you need. This can also be done from the keyboard by pressing ⌘1-9, which will switch to file tab 1-9.
You can also use ⌥⌘← and ⌥⌘→ to select the file tab to the left or right of the current one.
It is possible to re-arrange the file tabs by using the mouse to drag-sort them (click and hold the mouse button on a tab and then drag it to the new location). This should make it possible to arrange them so that keyboard switching is more natural.
One more key is ⌥⌘↑ which cycles through text files with the same base name as the current file. This is mainly useful when working with languages which have an interface file (header) and implementation file (source).
When you want to move to a file which is not open you can use the Go to File… action in the Navigation menu (bound to ⌘T). This opens a window like the one shown below.
Go To File
This window lists all text files in the project sorted by last use, which means pressing return will open (or go to) the last file you worked on. So using it this way makes for easy switching to the most recently used file.
You can enter a filter string to narrow down the number of files shown. This filter string is matched against the filenames as an abbreviation and the files are sorted according to how well they match the given abbreviation. For example in the picture above the filter string is otv and TextMate determines that OakTextView.h is the best match for that (by placing it at the top).
The file I want is OakTextView.mm which ranks as #2. But since I have already corrected it in the past, TextMate has learned that this is the match that should go together with the otv filter string, i.e. it is adaptive and learns from your usage patterns.
If you have a project window open, you can leave frequently-accessed files open (in tabs), and then use ⌘+1-9 to jump to open tabs.

Resources