Often, when I am reading code or debugging, I want the ability to quickly jump around files. I especially want to "go back" to where I was. I know about "Command+T", "Command+Shift+T", and, bookmarks. But, I cannot figure out a way to jump around files quickly.
UPDATE: I do not think I my question was clear enough judging by two answers given. Specifically, I am looking for a way to "jump back" to where I was in a file. I know how to navigate in TextMate (in general). I want to know if TextMate has a "jump back" key binding.
It's subtle.
The command-T thing has the files listed in Most Recently Used order.
So, you can go command-T return to get back to your last file real quick. At first I couldn't find it either.
I don't think there's a go to last edit location as there is in, say, IDEA/RubyMine.
Courtesy of MacroMates.com
2.3 Moving Between Files (With Grace)
When working with projects there are a few ways to move between the open files.
The most straightforward way is by clicking on the file tab you need. This can also be done from the keyboard by pressing ⌘1-9, which will switch to file tab 1-9.
You can also use ⌥⌘← and ⌥⌘→ to select the file tab to the left or right of the current one.
It is possible to re-arrange the file tabs by using the mouse to drag-sort them (click and hold the mouse button on a tab and then drag it to the new location). This should make it possible to arrange them so that keyboard switching is more natural.
One more key is ⌥⌘↑ which cycles through text files with the same base name as the current file. This is mainly useful when working with languages which have an interface file (header) and implementation file (source).
When you want to move to a file which is not open you can use the Go to File… action in the Navigation menu (bound to ⌘T). This opens a window like the one shown below.
Go To File
This window lists all text files in the project sorted by last use, which means pressing return will open (or go to) the last file you worked on. So using it this way makes for easy switching to the most recently used file.
You can enter a filter string to narrow down the number of files shown. This filter string is matched against the filenames as an abbreviation and the files are sorted according to how well they match the given abbreviation. For example in the picture above the filter string is otv and TextMate determines that OakTextView.h is the best match for that (by placing it at the top).
The file I want is OakTextView.mm which ranks as #2. But since I have already corrected it in the past, TextMate has learned that this is the match that should go together with the otv filter string, i.e. it is adaptive and learns from your usage patterns.
If you have a project window open, you can leave frequently-accessed files open (in tabs), and then use ⌘+1-9 to jump to open tabs.
Related
I have been developing in zend studio and there is a feature I miss a lot in Xcode. When you are reading code in a main function and you want to go in a specific function to read something, you can click in the left area of your current line of code were your are, and a flag-mark appears in that line of code, so you can go anywere else in the code and it will be very easy to come back to that line of code you were before because there is a flag and you only have to click on it and you automatically go back. Does Anybody know a similar way to do this in Xcode?
Unfortunately, this feature was present in earlier versions of Xcode (up to Xcode3 IIRC) and was called "Bookmarks", but it was removed since then.
You can use breakpoints (and disable them) as a workaround, even if it's not perfect. I personally prefer using other tricks, like "Open Quickly" and named tabs.
Alternate trick 1 : "Open Quickly"
One trick is to use Command+Shift+O (or "File" menu > "Open Quickly") to quickly open a file. In the field that appears, you can type:
The name or parts of the name of a file.
Typing "MainViewController" will propose to jump to the MainViewController.h or MainViewController.m file.
Typing "MainVC" will work too, as well as "MainViewCtrl", as long as the order of the letters you type is the same as the full name.
Very handy to just type "ContTVCell" to open the ContactsTableViewCell.h file that is hidden deep in subgroups of my project for example
Similarly, you may also type the name or parts of the name of a symbol, especially a method name.
For example, typing tvcellforrow will list you all the definitions of -tableView:cellForRowAtIndexPath: it could find in your project and let to jump to the one you want
When typing (parts of) the name of a file, adding : followed by a number at the end will allow you to directly jump at the corresponding line
For example, typing mvc:50 will propose you to jump to line 50 of MainViewController.h or MainViewController.m
Another trick : using (named) tabs
Don't forget that you can open tabs in Xcode, which can be very handy in this kind of situation.
When you are editing a file at some interesting position, you can create a new tab to browse elsewhere and go at any other place… and then go back to your first tab to find the code where you left it at the time you switched to the other tab.
Don't forget that you can name your tabs (simply double-click on their title) to give them a more explicit title. You may then quite think of them as "named bookmarks" somehow
Likewise, don't forget that you can detach tabs in separate windows too, if you prefer (for example to keep them around and visible on your secondary screen while you edit another part of your code)
You can even combine this with the "Open Quickly" trick presented above: once you made the "Open Quickly" field appear and typed something into it, instead of just validating using the enter key:
use Alt+Shift+enter to let Xcode present you a small widget that let you choose where you want the file to open (in the current tab, in another tab, in the assistant editor, in a dedicated window…)
use Alt+enter to open the file using the alternate navigation defined in Xcode preferences (Xcode > Preferences > Navigation > Optional Navigation). By default, the behavior when opening a file while using the Alt key is to open the file in the Assistant Editor. Personally I changed that in my Xcode preferences as I prefer to make Xcode open the file in a separate tab instead, which makes Alt+clic much more useful.
Sure, all those tricks with "Open Quickly…" and "Tabs" do not replace the bookmarks feature that you are missing. But they are still nice alternate ways to jump quickly to any position in your code, even any specific line of any specific file in your project, wherever you are in Xcode (even without having to have the Project Navigator visible on the left part of your window), and let you have multiple editors in different tabs to go quickly back to a part of interest in your code
its on top of your editor i have added two pics just check them.
When you navigate to another place in Xcode, say, open a different file, or Command-click and jump to definition, you can go forward and back by swiping right or left on the trackpad with two fingers.
You can also use keyboard shortcuts: Ctrl+⌘+→ to go forward, or Ctrl+⌘+← to go back.
Finally, you can click triangular buttons at the top left in your edit area.
There is a go back button at the top left of the editor!
If that is not good enough, whar I do is misuse breakpoints to set flags in my code. The breakpoint navigator thus becomes a table of flags. It isn't much but there you are.
For example, let's say I have three tabs open in vim:
1: nice_program.c
2: something_fun.h
3: super_script.sh
So if I hit some magic modifier key, and then type 'n' and hit enter I change tab to tab 1. Likewise, typing 'su' instead will navigate me to tab 3 instead.
Is such behavior possible? There are so many vim extensions, and I dont really get the whole vim extension lingo.
BTW, I am using gVim on XP and MacVim on OS X. Preferably the solution will work on both...
EDIT:
Note that I only want the incremental search to search across the names of the open tabs. That is, it's not supposed to actually search inside the tabs themselves.
Also, I never use buffers, it's tabs that I want this working for.
From the wording of the question it seems that you take the idea of tabs in
Vim not the way it is supposed to be taken by design of this feature. A Vim
tab page is not a form of a buffer or a window, it is a window layout
container, instead. No wonder there is no built-in way for switching to a tab
by the name of a buffer that is active (or the only one in its tab page, or
special in some other way). Semantically, that is switching to a buffer, not
a tab (but tab could be switched in order to show a buffer, if it is
necessary).
To switch to a buffer by its name use the :sbuffer command (:sb, for
short). It is not necessary to type the whole buffer name each time, since
the command has auto-completion. Usually one have to type only few letters of
a name to uniquely identify a buffer (the same way as you described
incremental search in the question).
By default, Vim open the requested buffer displacing one in the current
window. This behavior is governed by the switchbuf option. One of the
choices (called usetab) provided by that option allows to switch to a window
in another tab page if that window contains the buffer to edit. This is
exactly what suits your manner of work with tab pages.
To summarize, change the switching behavior as follows
:set switchbuf=usetab
and use the :sb command to open a buffer by typing a few letters of its name
and using Tab-completion.
I use this snippet I picked up in vim wiki to switch between open buffers (mapped to F5):
" switch between numbered buffers
:nnoremap <F5> :buffers<CR>:buffer<Space>
(put in your .vimrc file or whichever dotfile you use).
As for incremental search across open buffers, whenever I look up something using either /[something] or with */# on current word, it's automagically also highlighted in other buffers/tabs. Then I can switch buffers and hit n or N to move between matches in the currently viewed buffer. That's already baked into Vim.
Hope that helps.
The :set switchbuf=usetab solution given by ib never worked for me for whatever reason (even without loading plugins or my .vimrc) but :tab drop name-of-file works just the way you want (I found it on the Vim wiki).
Make it a custom mapping to save a few keystrokes with nnoremap <leader>t :tab drop.
Also I second ib's comment on the right and wrong way to use tabs in Vim.
Can anyone tell me if there's a quick way to format your code in Text Mate, similar to pressing ctrl K+D in Visual studio?
Thanks!
Edit by Damien_The_Unbeliever:
For those not familiar with Ctrl K+D, it doesn't just indent code - it reformats it using the generally established formatting conventions in the editor - it may replace spaces with tabs or vice-versa for the indentation, ensure code is consistently indented, move braces to separate lines, etc.
TextMate reindenting and reformatting varies a little depending on the language you're using.
You can generally use the Text menu, that depending wether you have an active selection or not it will show you different commands under it. For example, if you have selected a section of code, there will be a Indent Selection menu item. If you have no active selection, it will be Indent Line.
To have this working properly, be sure to select the current language, if it isn't assigned yet (like on unsaved documents). If you're working with HTML, it will simply indent the lines depending on what's above it. It will keep line breaks intact.
If you need something to break out tags on new lines and properly format the document, you should use the Tidy command that is found in the Bundles menu, under HTML (or simply by using the shortcut CTRL+SHIFT+H. If you have a selection active at the moment that you use it, it will simply reindent that section. If instead you have no selection, it will properly reformat the whole document, including checking for tag validity and other errors.
The Bundles for other language have similar commands, like XML (still Tidy) and Javascript (that has a Reformat Document command).
As an ending note, I simply suggest to look into the Bundles menu; there are many little gems in it. ;)
Did you look in the menu bar? Under Text you have a couple of Reformat… entries that may fit your needs.
Beside these native features, some bundles — like the JavaScript one — have custom Reformat… commands : click on the little cog button at the bottom and explore your current language's bundle's content.
How do I switch between the header and implementation file in Xcode 4?
In XCode 3 it was cmd and right or left (I think)
Ctrl+Cmd+Up or Down, but the shortcut seems a bit finicky and sometimes stops working, not yet sure when and why.
Be sure to FIRST click ON the actual code window...
that's the critical tip to ensure it works. Click anywhere at all on the actual code. (If you're active in one of the other many panes of Xcode, the keystroke combo has no, or different, meaning(s).)
Also, you can 3 finger swipe up and down on the touchpad if you have one.
Ctrl+Cmd+Up or Down
The shortcut sometimes stops working!!
The menu option has moved to "Navigate->Jump to Next Counterpart" and "Navigate->Jump to Previous Counterpart".
In preferences the key binding is now under "Jump to Next Counterpart" and "Jump to Previous Counterpart".
Why Apple insist on changing the menu positions AND names of these things is beyond me! I mean "Counterpart"!?
Worth nothing that Ctrl+Cmd+Left or Right move between previous and next files that were viewed (I mean "counterparts") too. These are also under the key bindings "Jump to Next Counterpart" & "Jump to Previous Counterpart").
The reason the menu option has been split between:
"Navigate->Jump to Next Counterpart" and "Navigate->Jump to Previous Counterpart"
is because you can have more than just one header file and one source file with the same file name. Besides having matching .xib files for view controllers, I have separate .vsh and .fsh files for vertex and fragment shaders in my OpenGL program. Along with my .h and .cpp files that's a list of 4 files that I can navigate up or down through with one key binding, instead of hitting the same key binding 3 times in a row to cycle back from file 2 to file 1.
Also in Xcode 6.1/7.1 shortucts are the same:
Jump to next counterpart:
Ctrl+Cmd+Up
Jum to previous counterpart:
Ctrl+Cmd+Down
Personally, coming from eclipse, I change this shortcut with:
Ctrl+Tab
this combination insn't already binded to anything else.
Xcode -> Preferences -> Key Bindings
search for "Jump to next counterpart" and put the new keys combination.
PRO
This is more efficient than default bindings see that you can use one hand instead of two!
"but the shortcut seems a bit finicky and sometimes stops working, not yet sure when and why."
Sometimes Xcode loses track of which .m and .h belong together. This is e.g. the case
when you open one of the files directly from the Finder. When you open the file from
the file list in Xcode, it normally works okay. Although when you have moved files between
folders & groups in the file list of Xcode, it will also list the relation between the files.
The command to swap between m and h files is CTL-CMD-up/down. It sometimes get stuck. To unstick it simply save the file, i.e. CMD-S, and the hotkey should work again.
I'm a NotePad++ user, new to TextMate.
There are some features that I really like in NP++ but couldn't figure out if TextMate support them.
Double click on a variable and have all instances highlighted
View 2 text windows side by side
Drag a file onto another opened Window
For this one, I don't know how to generate a screenshot ;-p. Basically, you can drag a file from Windows Explorer and drop it into NP++ to have it opened.
A lot of long time TextMate users are leaving TextMate land, actually. So, I'm not sure it's the right time to move to TextMate.
Emacs and Vim both do what you want and more. If you can afford the learning curve it's definitely worth it.
As for your question:
View 2 text windows side by side
You can have two or more windows for the same document. Assuming you are in a "project" right-click your file in the drawer and choose Open "foo.ext" in New Window. The two "views" contents are more or less in sync but doing cool things like columnar editing tends to break the syncing.
Due to how Mac OS X manages windows, the new window will probably be too large/too small and/or placed in a less than useful place. I use ShiftIt system wide to manage my windows and in such a case have them the same size side by side.
Double click on a variable and have all instances highlighted
What do you use this for? Is this visual highlight or non-contiguous selection?
Type ctrlw to select the word, then ⌘e to make the word your search term, then ⇧⌘f or Edit > Find > Find in Project… It will show all instances of the search term in another window. You can then "jump" to any occurence and do whatever you want.
If you only want to jump from occurence to occurence, select the word then type ⌘e then ⌘g to jump to the next occurence.
Another way is to type ctrls, a little text field appears at the bottom of your window where you can type a word and see its first occurence selected in real time. Repeatly typing ctrls will cycle through the occurences.
Drag a file onto another opened Window
You can drag & drop a file on TextMate's icon in the Dock. You can also right-click the file and choose Open with TextMate *or Open with…*. If you are in a "project" you can right-click and choose Add Existing Files…. Opening multiple files in TextMate will automatically create a "project" for you.
View 2 text windows side by side
I just tried this and it doesn't seem to recognize this functionality. the only time any sort of "add" icon came up was when I dragged the file into an open document and then released, but that resulted in adding the contents of the file into the document.
I just did a quick google search for "textmate split view" and it still doesn't seem to be supported according to some of the answers i found (one from macromates wiki).
Double click on a variable and have all instances highlighted
This also doesn't seem to be supported. This post suggests using the command + f (find), put the word into find, then command + g to jump to the next instance of that word.
There are definitely some things that can be added to textmate to make it more robust. If you are looking for something similar and are on a windows machine, you should check out e text editor. I loved that editor when I was working on a windows machine - split view is supported, but not sure about the highlighting. One thing that e also beats out textmate is the real time regular expression highlighting.