I've never run into this before. on the /orders page there is the list of orders. When clicking the link it should take you to that order. However there is a long pause and the browser
re-displays the list even though the url is correct localhost/orders/2024 . If I look at the page source it shows the order, not the order list. If I refresh the page it shows the order not the order list. It does this in both firefox and chrome.
The only thing I can thing is that laravel is caching something.
My routes file:
<?
Route::get('orders/{id}',['as'=>'orders.show','uses'=> 'OrdersController#show']);
Route::get('orders', ['as'=>'orders.index','uses'=>'OrdersController#index']);
Does anyone have any idea about what's going on? I should add it does this from other computers also
EDIT: the show method. The order show file just display's "hello"
public function show($id)
{
return View::make('orders.show');
}
Looking at the source code for most browsers means refresh. To check your source code, open developers tool on Chrome, click the order link and then inspect your source code on the 'Elements' tab.
Somehow your order request in the first time is not being served by 'orders/{id}' and falling back to 'orders'. So do some tests:
1) Open a new browser tab and hit: localhost/orders/2024, what do you get?
2) Use dd() to understand where you are exactly:
public function show($id)
{
dd('on show!');
return View::make('orders.show');
}
public function index()
{
dd('on index!');
return View::make('orders.index');
}
3) Check the source code of your lists page, how those links are being generated? They might being somehow confusing Laravel routing system.
4) Create a link to a product manually and check if it does the same.
This didn't have anything to do with Laravel. It was twitter bootstrap. I haven't tracked down the problem yet but when I exclude twitter-bootstrap it works fine. Sorry, this should have been one of the first things I checked.
Related
I've already tried to find anything about that problem but I guess I either was not sure how to shortly describe the problem to find a solution or nobody else had that before which I can't think of. Maybe my thinking is wrong, too.
I have a stateless wicket 1.6 form with an ajax supporting panel (WebMarkupContainer with output id). The panel holds a dataview with paging navigator. The dataview itself is filled by a DataProvider.
The panel shows some entries from the database and below that is the navigator. by clicking any page on the navigator, the panel is refreshed (ajax) and shows content from that page. The page itself is not re-rendered by the browser.
When I now leave the page by navigating to another internal page (so basically when leaving the dataview-panel-page in any way) to open a detail page or so and then return to that dataview-page the navigator is resetted (because it's stateless I guess). The navigator can't remember which page to show and begins at the top of the first page again.
The question is: How can I solve this? I would like to i.ex. navigate to page 2 and then temporary leave the page for another internal page. When returning I want to be on page 2, focussed on the record where I clicked the link to "details" before. This also happens when I just open a new page in a new Browser tab.
Thank you!
Here's some code:
final WebMarkupContainer gamesPanel = new AjaxContainer("gamesPanel");
final DataView<Game> dataView =
new GameDataView("gameOverview", targetCurrencyModel, searchTextModel, gameFilterModel,
new GameDataProvider(searchTextModel, gameFilterModel, targetCurrencyModel));
dataView.setItemsPerPage(ITEMS_PER_PAGE);
gamesPanel.add(dataView);
final XNPagingNavigator navigator = new XNPagingNavigator("navigator", dataView);
navigator.setOutputMarkupId(true);
add(navigator);
You guys can try what I mean: The page I'm talking about is http://www.xbox-now.de. Just navigate to page 2, then click on details and return to main page.
I think you might use History API to push a new state when you click on navigation bar. In the new URL for the state you can include a parameter that indicates the index of the current navigator page.
You can customize your AJAX link in order to perform this operations when user click on it.
For more details on History API see Updating address bar with new URL without hash or reloading the page
I solved this in the NoWicket framework by introducing a model aware page cache which reuses page instances when hashcode/equals matches in the page model. You can see the implementation in the GitHub repo, try this implementation of the IPageFactory wrapper as a starting point, but it is more code involved there, just check out the code, debug the example and navigate the code to understand it better in order to apply it to your application. See your use case in action by trying this data table example in the documentation website (which you can also debug locally): http://invesdwin.de/nowicket/ajaxdatatable
Try changing the paging index, navigate to a different page and navigate back to the data table example page. You will still see the paging index that you left there.
Thank you guys for your replies. I've done it now another way. Used the base code from here and modified it in some ways. Added some nice css AttributeModifiers to indicate the actual page:
item.add(new AttributeModifier("class", new PageLinkCssModel(pageable, pageIndex, "active")));
Then I modified some code to add or reset the page parameter, that it's 1) used only once and 2) keeps all the actual page parameters which were there before adding own ones. So I am just appending the page number now. This way I can keep my initially mount path like www.foo.bar/path/path/path. Complete URL would now look like: www.foo.bar/path/path?page=123.
To pass my entered page (i.e. page=5) to the data provider I just had to override the providers iterator. It should start with the page I entered. Due to the ugly generated navigator URLs (which are extremly bad for SEO) I now have nice looking urls which are working independently what wasn't possible before. And that's also the reason why I could not get back to the correct page. The navigator URL was not lookup-able by wicket.
new DataView<GamePrice>("gamePriceOverview", new GameDetailDataProvider(gameId, targetRegion) {
#Override
public Iterator<GamePrice> iterator(final long first, final long count) {
return super.iterator(ITEMS_PER_PAGE * getCurrentPage(), count);
}
getCurrentPage() comes from the base template and gets the actual page number entered (if one is entered):
public long getCurrentPage() {
// -1 weil zero based
return getRequest().getQueryParameters().getParameterValue("page").toString() != null
? (getRequest().getQueryParameters().getParameterValue("page").toLong() - 1)
: 0;
}
So instead of having ugly SEO-unfriendly URLs which are also not compatible to work independant (directly enter the generated url) I now have the same URL I expect with an added page-parameter.
URL now would looks like:
http://localhost:8080/game/4249/de/doom-preorder?page=2
URL before was:
localhost:8080/game/4249/DE/doom-preorder?0-1.ILinkListener-gamePrices-navigator-navigation-2-pageLink
If I now go back from the detail page to the main index with active "Bookmarkable-Navigator", I correctly come back to the page and position where I left it (because of bookmarkable page links).
That's how I achieved this problem with a nice bonus: User- and SEO-friendly URLs.
In Magento EE I need to redirect customers depending Origin country, browser lang and previous preference set in a cookie.
I have huge problems making it work with FPC.
I tryed to observe the controller_action_predispatch event, but FPC somehow caches my redirect instruction and customer is not redirected.
I then tried another solution: extending the run() method in Mage_Core_Model_App in order to perform operations before FPC starts to work.
Unfortunately, I don't know why, inside this method you can't access Mage::getModel(), Mage::helper(), Mage::getConfig() ecc
Can you help me please?
Thank you
I've recently been through exactly the same pain. You are on the right track;
controller_action_predispatch
Is the correct event to observe, and you can use this quite happily if you are redirecting to a category or product page with FPC enabled. The problem is the home page - which is a cms page. The cms page cache does not fire controller_action_predispatch. I got around this by adding this to my observer;
public function switchUser($event)
{
// CMS page bug, disable FPC to still use observer
$action = $event->getEvent()->getControllerAction();
if($action instanceof Mage_Cms_IndexController) {
$cache = Mage::app()->getCacheInstance();
$cache->banUse('full_page');
}
// do the rest of your code here
}
The blocks within the cms page will still cache so the page is still nippy, though obviously not as fast as it would be with full FPC enabled. Its a sound trade off in my opinion.
I think this is slightly different to the usual controller passing data to the view. I have a Project which has one DocumentOne. Within my app, the user creates a Project. This then redirects them to the show page for this project.
So with the project created, and the user on the show page for that project, I display the project ID. I then provide a select menu where the user can select a Document to display. So say I am in Project with the ID of 1, I then decide to show DocumentOne for this project. This displays a form with inputs for DocumentOne.
When the user fills in the form and submits, the data is saved to the database. The Project ID is the foreign key for DocumentOne. The following route is set up for DocumentOne
Route::resource('projects.documentOne', 'DocumentOneController');
Now I have data for DocumentOne which is linked to the Project with an ID of 1. However, if I now go back to the projects show page and then select Document One from the dropdown again, all I see is an empty form. This is obviously because the controller for this is
public function show(Project $project)
{
return view('projects.show', compact('project'));
}
So I am never passing it data for DocumentOne because theoretically it is not created when the Project is first shown. What I want to do is when the Document is selected in the Projects show page, is to have the form populated with whatever is in the database for that Document. If nothing is in the database, then the form will be empty. I have a DocumentOne Controller, but I dont know if I can link this to the Projects show page. I was thinking about doing something like this in the DocumentOne controller
public function show(DocumentOne $documentOne)
{
return view('projects.show', compact('documentOne'));
}
But not sure this will work. Hope I have not been too confusing and you understand what I am attempting, hoping someone can offer advice on how best to handle this situation.
Thanks
In my previous project, I also deal with such requirement, I thought so. Here my solution to solve such requirement.
Actual code calling from ajax.
Routes
get('setFlashData',function(Request $request){
$final_response = array();
$data_information = $request->except('_token');
$request->session()->flash('cmg_quick_create_data', $data_information);
if($request->session()->has('cmg_quick_create_data')){
$final_response['result']['success'] = true;
}
return response()->json($final_response);
});
But according to you requirement:
$data_information = $request->except('_token');
$request->session()->flash('cmg_quick_create_data', $data_information);
My basic functionality was, to share form data from Quick Create Section which is pop-up form to Full create form section, and whenever user click to "Go To Full Form" button from pop up, ajax call mentioned function which will set the flash data and than on destination side I only check weather its contain the flash data or not. and deal according to data.
#if (Session::has('cmg_quick_create_data')) {
{!! Form::model(Session::get('cmg_quick_create_data'),["class"=>"form-horizontal","data-parsley-validate"=>"data-parsley-validate",'role'=>'form','files'=>true]) !!}
#else
{!! Form::open(["class"=>"form-horizontal","data-parsley-validate"=>"data-parsley-validate",'role'=>'form','files'=>true]) !!}
#endif
I can understand this solution might be different from you requirement but hope full to figure out your solution. Look forward to hearing from you if still unclear from my side.
I am trying to create posts with comments with CodeIgniter and I am trying to add voting for the comments with + and -.
But my problem is not actually this functionallity but more exactly creating the link and the method in controller/model for this.
I understand that there is some kind of link to methods.
If I have something like this:
public function like() {
echo 'Test Function';
}
and when I create link like this one sitename.com/posts/first-post/like theoritecally I will see blank page with "Test Function" text (and of course if I write proper routing rule but I cannor for now).
I can see a blank page with this working echo 'Test Function', but does this mean I have to load every methods and views for the entire page if I want to display the entire webpage with all the elements? I think that I mistake something very serious here but I don't know what.
The example with the "Create news" tutorial in ellislab.com didnt help me. They show something similar I think with /create/ section in the URL and create() methods.
If I have many links with functionallities do I have to add new routing rules for all of them? I really tried to search in Google and everywhere but I didnt find anything related.
Sorry for this lame question.
You need to use Ajax call and on callback you have to increase or decrease the count. For creating a link , once page is loading render the data and provided the default link like
for + http://<site.com>/<controller>/like?totalLike=<36>
for - http://<site.com>/<controller>/unlike?totalunLike=<3>
Once user will click + link then by using Ajax, call the controller method link/unlike and increase or decrease the count and repopulate the link again with fresh counter.
Hope it will resolve your problem.
I am trying to use CodeIgniter and jQuery-ui dialog to create a modal window with form to update user information.
The process should be like:
1. Press a button on a view page.
2. A modal window pops up.
3. Inside the window is a form that a user can fill.
4. If the user filled something before, the information should be shown in corresponding field
5. Click the update button on the modal window to save the changes to database.
Can anyone provide a good sample of this process?
I used ajax to pass the data but it didn't work when I was trying to update the data to the database. It would be nice if an example of how to pass data from ajax to php and how php handle that.
Thanks,
Milo
well the jquery bit for post(), get(), ajax() works the same in any measure you would normally use it.. key difference here is with CI you can't post directly to a file-name file-location due to how it handles the URI requests. That said your post URL would be the similar to how you would access a view file normally otherwise
ie: /viewName/functionName (how you've done it with controllers to view all along. post, get, ajax doesnt have to end in a extension. I wish I had a better example then this but I can't seem to find one at the moment..
url = '/home/specialFunction';
jQuery.get(url, function(data) {
jQuery("#div2display").html(data);
});
in the case of the above you notice despite it not being a great example that. you have the url with 2 parameters home and specialFunction
home in this case is the controller file for home in the control folder for the home file in views the specialFunction is a "public function" within the class that makes the home controller file. similar to that of index() but a separate function all together. Best way I have found to handle it is through .post() and a callback output expected in JSON cause you can form an array of data on the php side json_encode it and echo out that json_encode and then work with that like you would any JSON output. or if your just expecting a sinlge output and not multiples echoing it out is fine but enough of the end run output thats for you to decide with what your comfortable doing currently. Hopefully all around though this gives you some clairity and hopefully it works out for you.