Visual Studio 2013 for Desktop is displaying incorrectly. When I open the program, it displays correctly but upon moving my cursor over links or images inside of the interface, they either expand to fill the whole window or the line itself blurs.
I'm running Windows 8.1. I've run it in compatibility mode for XP, Vista, and 7. I've run as administrator. I've reinstalled and repaired. This error is easily reproducible and has occurred over the course of 3 days.
Any help would be appreciated.
Can only guess that your video card vendor happens to maintain a bad driver (or Windows Update pushed a bad version to your machine).
http://support.microsoft.com/kb/2894215
The workaround is to disable hardware graphics acceleration and test again.
Related
So i have a new set up of windows 10 Home Edition on my PC and installed VS 2017 Community Edition. When i build and run the app it runes absolutely fine. But if i use the graphics debugger i get the app open and i print screen to snapshot a frame. The window opens and it shows the following
If i choose to open that frame then i get the following error - An error occurred. Playback of your application may be incomplete(HRESULT = 0x80004002) "No such interface supported"
Does anyone have any ideas what this could be as it worked fine on my laptop and for the record. Opening a brand new Directx12 app project with the spinning cube also does this.
Please have a look for the question at here. I suppose you are using Windows version 1809 or higher.
Graphics Debugging Tool does no longer support DirectX12 after 1809. Instead, you should use the PIX for Windows in future.
So many things happened that I don't know where to start. Seriously, shouldn't this be simpler?
Edit: Someone here knows how can I contact Microsoft to tell this? Or even, can someone tell them about this problem?
I have the last Windows 10 desktop and also have Windows Phone 10.0.10512.1000. I installed Visual Studio 2015 with tools for Universal Apps development (and also 8.1). I have a Lumia 730.
So I connected my phone with my USB cable. Everything fine, the phone gets recognized and I can navigate through the folders.
Then I started Visual Studio 2015 and created a blank universal app. Compiled and tried to deploy. Now this is happening to me: Visual Studio hangs for some moments. Eventually I get an error telling that the device was not found (DEP6200).
I already tried dozens of solutions:
disconnecting from wifi in my laptop and my phone
restarting the IpOverUsbSvc service
rebooting the computer and the phone
deleting the devices in the Device Manager
Registering and Unregistering the phone (it sometimes works)
All of the above with the phone screen unlocked
disabling Hyper-V
disabling firewall
Other solutions that failed miserably
I also tried to use that Windows Phone Developer Power Tools. When I try to use it, it asks me to install some "Phone Tools Update Pack", but when I try, it says that the operation didn't succeed, and also shows the NRE message string (object reference not set to an instance of an object).
I can go through the phone's folders without any problem. I tried to reinstall the drivers... i tried everything.
It's quite sad.
Do you guys can think of some more thing to check?
EDIT: I tested this app before doing all this: https://blogs.windows.com/buildingapps/2015/07/09/just-released-windows-10-application-deployment-tool/
And it worked. If that's the case, is Windows Phone 10 deployment over Visual Studio working already or we have to wait some more time?
Edit2: After making some changes to my app manifest and choosing "ARM" config, now I get this:
1>Deploying to SD Card...
1>Updating the layout...
1>Copying files: Total <1 mb to layout...
1>Checking whether required frameworks are installed...
1>Framework: Microsoft.NET.CoreRuntime.1.0/ARM, app package version 1.0.23117.0 is not currently installed.
1>Framework: Microsoft.VCLibs.140.00.Debug/ARM, app package version 14.0.23019.0 is not currently installed.
1>Installing missing frameworks...
But it just stays there. It's stuck, and it stays there forever. At least I got some info... Its more or less the same steps that WinAppDeployCmd does, but the command line app does it successfully.
Somehow the problem got solved. I created a brand new project and did this:
1 - In your phone, try disabling the developer mode on your phone. What an unexpected development!
2 - Disable the "phone discovery" thingy. I don't know the name of this configuration in english (as my phone is in Portuguese). Just in case.
3 - Choose the correct architecture. This is obvious, right? In my case, ARM. If you try deploying with x86 or x64, it should give you an error. For me, it didn't.
From now on, you should be able to deploy your apps in both developer mode and non-developer mode. It just works, somehow. And it might NOT work for you, sorry. I think I got lucky.
It worked even after a reboot. So the solution is "pretty solid" (in an universe where gelatine is pretty solid).
I had the same problem. I tried the fix of the comment and went to devices manager.
Under USB-Devices there were three Lumia 920s listed.
I selected the second one and clicked on uninstall.
At the end it asked me to restart the Computer. I clicked on NO.
(When I uninstalled the first or third one, it didn't ask me that).
Then the error disappeared (now another common one appears (HRESULT: 0x80073CF6))
I have a Lumia 950 xl, with windows 10 installed, anniversary version. I had the same problem, and my solution was to turn on 'Device discovery' and 'Device Portal', and also keep the 'Developer mode' on.
I believe the only necessary option was the 'Device discovery' though!
Just in case someone still runs into this issue, I had something very similar with my Visual Studio 2015 professional update 1 but I couldn't even deploy to an emulator.
The issue has gone after I upgraded to Visual Studio 2013 update 3.
I had the same issues on Windows 10 with Visual Studio 2015. I updated the the UWP SDK to Anniversary Edition Build 14393, set the target framework to this and it worked. I guess the incompatibility between the device version and sdk version was not allowing the device to be discovered by Visual Studio.
I'm trying to install visual studio 2013. I have an iso file and I'm mounting image to drive but the installation doesn't process anything after displaying Visual Studio logo and a black rectangle after that.
Visual Studio logo appears. See Image
Now logo gets disappear and there is a black rectangle box in front of me.
See Image
I can move the box by pressing mouse button and moving it even with 2 inch below the box.
I have Windows7 32 bit with service pack 1 installed in my desktop. Core i3 and Intel HD graphics. I have Titanium Studio, Visual Studio 2010 and other regular softwares installed as well.
The exactly same issue happens when I attempt to install VS2012.
I googled quite a while and found some topics on https://social.msdn.microsoft.com complaining this issue. Basically, the answers ask to check Windows Update and make sure it's up-to-date, especially .NET framework to version 4.5.x. So I do this, and after installing updates and restarting several times, it finally works. Maybe you can try this way too.
I found solution for myself. I was using a software which was protecting my pc's graphic driver and was using another one. I removed that and VS installed as usually.
You should try to install at least once without any driver in your system if you are facing such issue.
In my case it was a missing file machine.config in C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG. I copied the file from another PC and installation of VS2013 immediately started, and completed successfully.
I have a VB6 app that loads initially (for a small prompt to enter a license key, only on the first time). It works fine on my machine (windows 7).
I had complaints of it crashing on someone else's machine (both xp and 7), so I made a Windows XP virtual machine. I installed it on the virtual machine, it crashed. I wanted to see where it crashed so I installed Visual Studio on the virtual machine so that I would get a debug prompt. When I ran the program again, it worked.
I am more familiar with C++ and had these kinds of problems, so I figured it was some sort of runtime issue.
I found this VB6 SP6 Redistributable Runtime:
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=24417
I installed that, and it still wouldn't run.
Any ideas where to go from here?
Edit:
I have tried depends.exe, it only shows MSJava, which I've heard I can ignore. Does depends.exe also show things like .ocx (Active X controllers?) that are required?
Also, from the cmd prompt, %errorlevel% doesn't seem to get populated. Is that a VB6 things, or does that indicate that this is truely a crash and not a user exit?
Open the Visual Basic project and check both "References" and "Components" under the "Project" menu.
Since it is crashing with the VB runtime installed it is likely a component that you have referenced in the project that either does not exist (or is not registered) on the client under test.
This should be a simple fix.
I had the same problem on my windows 7 computer.
I have uninstalled everything, changed my windows theme to Windows Classic.
I changed following properties of VB setup file.
Right click on setup.exe and go to properties and in compatibility tab change the compatibility mode to windows XP SP2. And in settings uncheck the following check boxes.
Disable Visual themes
Disable Desktop composition
Disable display scaling on high DPI settings.
Run this program as an administrator
And have completed installation.
Followed by installing VB 6 service pack 6 from here.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=24417
Hope it helps.
It may require something else other than just the runtime, have you tried viewing it with dependency walker http://www.dependencywalker.com/ on the machine that it crashes on?
It should quickly point out any missing references.
Maybe try again, create a new VM, but install the remote debugger instead of the full VS.
You should create an installer for your application. There may be more dependencies than just the VB6 runtime. A good installation tool will detect at least some of necessary dependencies for you. Have a look at this question or this question
VS6 popped off a series of errors before bombing out completely during install on Windows 7. I specifically need to get VB6 functioning on Windows 7. Anyone having any luck?
Folks on the VB6 newsgroup report they have managed to get it working on Windows 7.
There's this step-by-step guide on how to install the IDE on Windows 7 (including 64 bit).
If that doesn't work (scrapes barrel) try this old tip about persuading the install not to install the Java VM? Link is now broken so here is the tip:
Before trying to install VB6. Create a new file, name it msjava.dll and place it in your windows directory. The file can be zero length. You can then happily install without the prompt to install an old version of Microsoft's flavour of Java. Once you have installed VB6, delete the msjava.dll otherwise windows update will prompt you to update it.
Or (scrapes hole in barrel) these tips from an article about getting the IDE working on Vista?
Footnote: if developing with ADO, be aware of this.
The only way I've found that works is Windows XP mode (i.e. a virtual machine). Works fine there, but otherwise, not at all.
I found ALL the answers in a thread at vbmonster.com. As mentioned above, you CAN install Visual Studio 6 with Service Pack 6 under Windows 7 by following Derek's detailed instructions at fortypoundhead.com.
I had a problem because I needed to install Service Pack 5. I use a third party program that does not work with Service Pack 6. A really smart programmer (GuideX) came up with a great hack to get around the MDAC 2.5 error.
Win 7 64 bit service pack 5 & 6. Turn compatability off and it seems to work.
Recently I had to debug an ancient application written in Visual C++ 6.0 on Windows 8.1. Tried different solutions all of them failed, only this one worked.
This guys made a special installer that allows installing VC++6, VB6, and SP6 on Windows Vista/7/8/8.1/10 without any errors whatsoever.
Hope it would be helpful to someone.
I installed VB6 on Windows 7 Pro without having to use compatibility settings or run as administrator.
Doesn't really help you, but does show that it can work.
Several people in my office have installed Visual Studio 6 (without VC++) on Windows 7, both 32-bit and 64-bit with no problems. The one thing we have in common: we've all turned UAC down to it's lowest setting. Nothing else special required.
I am using vb6 on windows 7 32 bit system for a long time.
you will need to install your vb6 with compatibility of xp2.
Create a 0-byte file in the C:\Windows directory called msjava.dll.
Don't just install via the Autorun executable; instead browse the Visual Studio 6 CD (or folder), right-click Setup.exe and select Run As Administrator.
On any Program Compatibility Assistant warnings, click Run Program.
Step through the setup screens until you're able to choose Custom Setup, then click next.
On the setup options, install the following items and nothing else:
Microsoft Visual Basic 6.0
ActiveX
Data Access
Graphics
Click continue and the process will start, and (hopefully) eventually complete.
Skip the installations of the MSDN CD, BackOffice, VSS and SNA Server, and clear the checkbox for "Register Now". Setup should be complete.
Download the VB6 Service Pack 6 from http://www.microsoft.com/downloads/en/confirmation.aspx?FamilyID=A8494EDB-2E89-4676-A16A-5C5477CB9713&displaylang=en and install.
Change the compatibility settings for Visual Basic (to get it to run a little more smoothly under Windows 7) by browsing to C:\Program Files\Microsoft Visual Studio\VB98, right-clicking the VB6.exe file, and selecting properties.
On the Compatibility tab, check the following:
Run this program in compatibility mode for Windows XP (Service Pack 3)
Disable Visual Themes
Disable Desktop Composition
Disable display scaling on high DPI settings
When you start up the IDE, you may get a notification saying that the color scheme has been changed to Windows 7 Basic, but it will be changed back to Aero once you exit. Everything should be working fine at this point!
Note: when you first run your new install vb6 run it with admin rights and with xp2 compatibility so that your exe can run on any system.
The word "supported" is used loosely in this thread, potentially leading the unwary reader to the conclusion that Microsoft supports the VB6 IDE (that is, the integrated development environment) on operating systems beyond Windows XP. This fact clearly is stated in the table that appears on the page at this link:
https://blogs.msdn.microsoft.com/nikosan/2012/04/20/support-statement-for-visual-basic-6-0-on-windows-8-updated/
Note that executables developed using VB6 are in fact compatible with Windows OS's from Windows XP through Windows 10--32/64-bit versions:
https://blogs.windows.com/buildingapps/2015/06/22/getting-ready-for-windows-10-sdks-compatibility-bridges/
Anyone using non-standard methods to coax the IDE into working on OS's that Microsoft does not support is exposing themselves/their organizations/their employers to risk and is not suitable for risk-averse organizations.
Having said that, I think the purest solution is to install Windows XP onto a virtual machine and run that VM in a modern host OS, such as Windows 10. That works just fine, and you can install directly from the VB6 Setup disc without making any pre-install/post-install customizations.
I had a Vista x64 box with a working copy of the VB6 IDE (which was supported). I upgraded the OS to Windows 7 x64 and the VB6 IDE still works fine. You could try that. I know, a huge PITA and kludgy but still, it worked for me.
I run Windows 7 Ultimate 32-bit, installed Windows Virtual PC - XP Mode, and that solved my problem isince I can run MSDEV 6.0 in the XP Window.
Not esay to install XP Mode though, the MS site is buggy.
The VB6 programming language is supported on the Windows 10 Technical Preview.
Visual Vasic 6 applications run and the VB6 IDE installs and works too.
I have the VB6 IDE running OK on Win-XP-16, Win-7-32, Win-7-64, Win-8.1-32, Win-8.1-64, win-10-32 and win-10-64 by using the instructions above which basically say, turn off UAC, run the installer AS ADMIN, and then set the VB6.exe file to run in XP-SP3 Compatibility mode.
I have had some issues with it and have had to do a bit more googling to solve these but I don't remember any more what those issues or solutions were.
I've even got the VB3 IDE running on the 32-bit versions of XP, Win-7, Win 8.1 and Win-10 - without even installing them - just copied the C:\VB folder from another computer and copied the *.LIC license files and *.VBX etc files as well.
I have successfully installed vb6 on win 7 32 bit by installing xp first then installing new win 7, (not upgrade), and do not format. then it will install vb6 without a problem
It's depending on your build version of Windows 7.
If your Win7's version is lower or is not updated, it has MANY PROBLEMS with compatibility.
But mine is newer Win7 version and has NO COMPATIBILITY TROUBLE.
I am currently using VB6 , VS6 and they still work fine!
If Properties->Compatibility->Windows XP doesn't help, fix it with UPDATING your Win7.