For example, now I have a "root.exp" expect script as following:
spawn ssh user#ip
expect "Password:"
send "password"
Then, the expect command I want to send to this ssh server is stored in another expect script file branch.exp, which for example is as following:
expect ">>"
send "ls"
My question is, how to call this branch.exp in root.exp? For example, something like following in the root.exp:
spawn ssh user#ip
expect "Password:"
send "password"
*call* branch.exp
As Johannes said, you can use the source command. The Expect and TCL mini reference manual says:
source Procedures and variables can be stored in other files and read using the source command. As the file is read, the commands are executed.
Example:
source ~/def.tcl
Related
I'm writing a script that will scp a tar file from my local server to a remote host. Since the script generates the file through a pre-requisite process, the name is generated dynamically. My script needs to take the name of the file and pass it to scp for transfer.
#!/usr/bin/expect -f
spawn scp test.$(date +%y%m%d_%H%M).tar user#IP-ADDRESS:/destination/folder
set pass "password"
expect "password: "
send -- "$pass\r"
expect eof
I've tried setting the filename as a variable but keep seeing the same error:
can't read "(date +%y%m%d_%H%M)": no such variable
while executing "spawn scp test.$(date +%y%m%d_%H%M).tar user#IP-ADDRESS:/destination/folder"
$(date +%y%m%d_%H%M) is not a Tcl command. If you use expect, you have to learn Tcl. To get a formatted date in Tcl, use the clock command. Also, interpolation of the result from a command in Tcl is not done by $(....), but by [....]. You can find examples for this construct here.
Decided to go another route since the team was able to provision a new Artifactory repo for this binary and alike. However, to the advice provided here I was able to make a few discoveries which I used to fix my issues:
I also had a password with $ symbol and that also caused a world of issues.
#!/bin/bash
TEST=$(date +%y%m%d_%H%M)
/usr/bin/expect <<eof
set password {pas\$word}
spawn scp "$TEST" user#IP-ADDRESS:/destination/folder
expect "*password:"
send "$pasword\r"
expect eof
I need to connect in a system where I have to SSH first then telnet. Then I can start executing some command.
I am struggling about the telnet part. Can you tell me how I can make it please? Is there another alternative than spawn please? Thank you
#!/bin/bash
cat command.sh | sshpass -p 'passowrd' ssh -q -o StrictHostKeyChecking=no root#pc1;
Then my command.sh
#!/bin/bash
spawn telnet pc_modem
expect "login:"
send "root"
expect "Password:"
send "youyou"
cliclient GetMonitoringData;
In this use, the shebang has no effect*. You're passing the contents of the script file to ssh to be executed line by line as if each line were separate commands that will be interpreted by the shell instead of expect.
Try changing command.sh to something like:
# no shebang here
/bin/expect -f - <<<'spawn telnet pc_modem
expect "login:"
send "root"
expect "Password:"
send "youyou"
cliclient GetMonitoringData;'
This sends the expect script as a here string to expect's STDIN. If you use variables in your expect script you may need to change the quoting or escaping depending on whether they are shell or TCL variables and where the substitution needs to take place.
* The shebang is used by the kernel to select the program to interpret the contents of the file when the file has been marked as executable and is run by invoking the file by its name. When a file is run by explicitly naming the interpreter (e.g. sh run_me or ssh user#host run_me_there) the shebang doesn't come in to play.
I find out the answer and works perfectly :
/bin/expect <<<'spawn telnet pc_modem
expect "login:"
send "root\r"
expect "Password: ";
send "youyou\r"
send "yourcommand1\r"
send "yourcommand2\r"
expect eof
'
I need to make a sftp connection with a password and download a file. There is an ip restriction so first of all i should make a ssh connection. I wrote a script but it stucks after connecting with ssh.
Note: i also tried doing it with an expect script but it also didn't work.
#!/usr/local/bin/
ssh test#test1.t.com
lftp sftp://test2:123456#test2.com
get "file.xls"
Edit: You can also see my expect code here.
#!/usr/local/bin/expect -f
expect -c "
spawn ssh test#test1.t.com
expect \"test\#test1\:\~\$\"
spawn sftp test2#test2.com
expect \"*assword:\"
send \"123456\r\"
expect \"sftp\>\"
send \"get file.xls\r\"
expect \"sftp\>\"
exit 1
";
I'm not sure exactly what you're trying to accomplish here. First, I'll address the problems in your expect script. Since your shebang line invokes expect, you don't need to wrap the expect body in a call to expect. That gets rid of all the backslashes. Next, you have 2 spawn calls, which raises questions about you're intent. I'm going to assume that you want to ssh to test1, then grab the file from test2 so the file exists on test1. This assumption changes the 2nd spawn to a plain send command.
#!/usr/local/bin/expect -f
set shell_prompt "test#test1:~$"
set sftp_prompt "sftp>"
spawn ssh test#test1
expect $shell_prompt
send "sftp test2#test2\r"
expect "*assword:"
send "123456\r"
expect $sftp_prompt
send "get file.xls\r"
expect $sftp_prompt
send "exit\r"
expect $shell_prompt
send "exit\r"
expect eof
Now, you can scp the file to your local machine. Let's put those 2 steps into one shell script:
#!/bin/sh
expect <<'EXPECT_SCRIPT'
set shell_prompt "test#test1:~$"
set sftp_prompt "sftp>"
spawn ssh test#test1
expect $shell_prompt
send "sftp test2#test2\r"
expect "*assword:"
send "123456\r"
expect $sftp_prompt
send "get file.xls\r"
expect $sftp_prompt
send "exit\r"
expect $shell_prompt
send "exit\r"
expect eof
EXPECT_SCRIPT
scp test#test1:file.xls .
I'm trying to automate a startup of a specific service with bash
When the service is started with init.d (/etc/init.d/openvpn.custom) it is promting for username and then password - and then it connects
The auth-user-pass from-file is not possible with the installed version, and it cannot be upgraded because of dependencies
So i'm trying to write a simple bash scripts that executes the init.d script, sleeps for a bit, inputs the username, returns, sleeping a bit, inputting the password - you'll get the flow.
like http://pastebin.com/qWHX7Di5
I've experimented with echo, but it doesent seem to work
This is for a rather legacy firewall i'm asked to keep connected.
Is this even possible?
I would use expect instead of bash. You can still call it from within bash if you need to do other tasks as well.
In expect, the script would be something like the following (untested):
#!/usr/bin/expect -f
set username "username"
set password "password"
spawn /etc/init.d/openvpn.custom start
expect "Username:"
send "$username\r"
expect "Password:"
send "$password\r"
expect eof
You'd want to change the expect "Username:" & expect "Password:" lines to match the actual login prompts that are output by your init.d script.
See the expect man page for further details.
You can try using a here-doc:
/path/to/init.d << END
$username
$password
END
This is the first time I am writing a shell script. I tried to do as much research as I can to avoid dumb/repetitive question. Please excuse if its repeat/dumb question.
I have a shell script which connects to remote linux machine and runs scripts there. I am using 'expect' to spawn a ssh connection and to issue commands to trigger the job. However, I am having issues while closing the connection after completing the job.
This is my script:
set prompt "(%|#|\\$|%\]) $"
expect -c 'spawn ssh $UN#$STAGE ;
expect password ; send "$PASS \n";
expect -regexp "$PROMPT"; send "./settings.$UN.sh > settings_log.txt \n";
interact'
This script successfully runs the script file for me ($UN and $STAGE parameters are input to the script. I omitted that here for simplicity). However, this leaves me with an open connection.
I tried to close the connection after running the script by using following instead of above
expect -c 'spawn ssh $UN#$STAGE ;
expect password ; send "$PASS \n";
expect -regexp "$PROMPT"; send "./settings.$UN.sh > settings_log.txt \n";
expect -regexp "$PROMPT"; send "exit \n"'
This does close the connection but I noticed that my script file did not run at all. Also the settings_log.txt is not generated at all.
Does this mean, that exit command is aborting the process before its completion? I tried using 'sleep' before exit but it did not help. Is there a better suggested way to terminate the connection when using expect?
Any help is appreciated.
with expect, you terminate your send commands with \r not \n, so
expect -c 'spawn ssh $UN#$STAGE
expect password
send "$PASS\r"
expect -regexp "$PROMPT"
send "./settings.$UN.sh > settings_log.txt\r"
expect -regexp "$PROMPT"
send "exit\r"
expect eof'
Note you can execute remote shell commands and copy files using ssh and scp, directly, without using expect.
For example,
scp ./settings.$UN.sh $UN#$STAGE:settings_log.txt
ssh $UN#$STAGE whatever-you-need-to-execute
The connection will close as soon as soon as whatever-you-need-to-execute completes.
Your outer script seems to be written in csh and sets a variable named "prompt", but your expect script is using a variable called "PROMPT". Try making the two variable names match case.