I've used ObjectDock in the past to replace the taskbar for a number of reasons. I had to reinstall Windows and apparently now ObjectDock is no longer free. One main reason I liked ObjectDock is because it completley replaces the taskbar, hiding the taskbar completely, not just autohiding it or hiding it till moving my mouse to the bottom, but actually completely removing it.
So clearly there is some way to hide it or move it so it doesn't show up in some way, but I've yet to find anything online that shows a way within Windows 7 or a programmatic way to do so. I've got most of my programs linked to hotkeys through AutoHotkey, and since my resolution is small I'd like the extra space.
Try using either Taskbar Eliminator or The Ultimate Windows Tweaker. They should allow you to remove it, this should remove it for you.
Related
I would like to be able to stop windows from being dragged past the border of the screen. For example, open a window that is not maximized, click the top bar with the mouse and drag the window wherever you want. Now drag the window to the left/right/top/bottom of your screen and notice that part of the window goes off screen. I would like the window to bump up against the edge of the screen and go no further.
In the same way the cursor can't go over the edge on the left side, I would like to make a barrier so windows can't move over it either.
The main reason for doing this is because I am making a batch program in which I need it to not go off screen. This is annoying and I was hoping that someone here could be of some help.
Sorry if this is an obvious question, I tried a few searches but had no idea what terms to look up.
Thanks for any help in advance!
Sorry for the late response (I was researching this), but here is the answer:
There is no current way to do this easily. I'm sure you can edit windows src code and add that property, but the language it is made in is not in batch and it would be EXTREMELY hard to edit these files :(
Also, this would affect all windows, not only that specific program, meaning no easy shortcut for split screen. So no, you cannot do this.
On Windows 10 you can simply move a window near the edge of the screen and it will auto-fit on screen. You can also use shortcuts to do this. [Windows key] + [arrow left] or [arrow right]
you were able to change a setting in windows 7 to prevent this. I know that this is a feature if you are using multiple monitors but if using only one monitor there should be a way to change a setting. thank you Microsoft once again for making our lives complicated. the more you guy release a new windows the harder it is to use.
Finally i found real solution for this.
I was searching a real solution for my application.
There are many tricks but using reg we need to restart computer.
You can disable it from powershell. You need to call this file from your code.
Here is link.
Check download file at bottom called "DisableAeroSnap.ps1"
https://michlstechblog.info/blog/windows-disable-aerosnap-automatically-window-arranging-and-resizing-while-dragging/#more-951
I was wondering, would it be possible to create a small piece of software that would allow the user to minimize a window by scrolling down on it? (on the top part that can be used to move it via drag and drop, obviously).
Following the same idea, it would be cool to be able to scroll up on the task bar icons to restore a minimized windows. I thought it would be cool (and since the user does not actually click but scrolls instead, it would prevent accidental nearby program openings when trying to restore a window)!
I am a total newbie when it comes to things like these. Could you please indicate me:
if Windows would let me do that (I doubt it wouldn't)?
How to code something like that (what language, and so on...)?
A way of doing this for maximizing the tabs open in the taskbar would be to create a custom taskbar identical to that of the main one. The second taskbar from Dual Monitor Taskbar works this way. There are also libraries in languages such as C++ which can detect scroll wheel movements.
Although this wasn't the most helpful answer, hopefully this could give you some ideas.
It is definitely possible. I found a software that does that 6 years ago and I have been using it ever since. It is called Preme for windows (http://www.premeforwindows.com/)
I have been using the software for about 6 years now and I cannot use windows without it. It also allows closing windows when clicking the mouse scroll key and maximizing a window with scroll up.
I hope this helps you. I am always wondering why Microsoft does have these options built in in the OS!!
I would like to completely remove the Windows 7 taskbar, including tray and start-button, so that the user can not reactivate it by pressing the Windows-key on the keyboard. however, all other explorer functionality (i.e. starting an explorer Window using Windows+E) should remain.
Is it possible to permanently hide the complete taskbar? Maybe there are some registry values on could change in order to make that behaviour selectable using a powershell script?
Thanks a lot
Here be my solution (it hides rather than replaces or removes the native taskbar - this allows it to work with programs that have a dependency on the native taskbar, such as display fusions taskbar).
disable-taskbar-always-top
Still to solve: [HALF SOLVED]
Eliminate the stupid line that auto-hide leaves with some maximized applications, such as Google Chrome
HALF SOLUTION -
If you move the taskbar to the left or right edge prior to doing the above steps, you don't get the stupid auto-hide line at the top or bottom of Google Chrome. Since the native taskbar is not mouse sensitive anymore, it won't impact your use of hot corners, or multi monitors (for instance I have the native taskbar on the left of my middle monitor, and it does not popup when moving between monitors using the steps in this post).
Okay, I think I have finally - finally - got a workaround that:
Keeps the native Windows 7/8 taskbar hidden for your session (you do have a couple of steps you need to do on start-up each time, or if you manually un-hide the taskbar).
Prevents the native Windows 7/8 taskbar from opening with popups or programs seeking attention (flashing taskbar thing).
Prevents the native taskbar from being mouse sensitive (i.e. despite auto-hide, it will not appear when you mouse over the hidden taskbar anymore).
Allows you to use the screen area that is occupied by the native taskbar (this is the problem of not combining Taskbar-Hide with the autohide setting; you can't use that screen real-estate).
Allows you to run alternative taskbars that are dependent on keeping the native taskbar functional (for instance Dislay Fusions Multi-Monitor Taskbar + [Settings >> Advanced Settings ?> 'Show On All Montiors'])
One Time Steps:
1) Download and run this registry edit to prevent balloon notification popups from the native taskbar/system tray:
Notifications - Enable or Disable Message Balloons - Windows 7 Help Forums
(You can open this in notepad to see what changes it will make prior to installing it, if you want).
2) Download and run Taskbar-Hide from here:
Hide Taskbar: Hide Taskbar in Windows 8 | 7 with a hotkey
3) Set the taskbar to auto-hide
Optional:
3) B) Add a shortcut to Taskbar-Hide.exe in your startup folder, to have it launch automatically with windows on startup (you still need to use the Ctrl+Esc hotkeys to activate the functions of taskbar-hide - though you could also script this if you were really keen).
Startup Folder:
C:\Users{User Name}\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
Steps to hide taskbar after each start-up or manually un-hiding using Taskbar-Hide
4) Make sure Taskbar-Hide is running.
5) Make sure the taskbar is in its auto-hide state (i.e. you'll have to look at any programs that are currently seeking attention).
6) Once the taskbar is 'auto-hidden', press the hotkeys for Taskbar-Hide (Ctrl+Esc)
[This should mean that the native taskbar area is no longer sensitive to mouse activity]
One way is to replace the explorer shell with your own shell. This is the a common method done in Windows 7 Embedded.
In older versions of Windows (such as XP) it was possible to specifiy a shell for each user via regedit. I am not sure this is easily possible in Windows 7.
See https://superuser.com/questions/352865/how-do-i-change-the-windows-shell-for-only-one-user
Make an empty exe file and use it as the file to use in your "Custom User Interface" group policy. Additional information here.
I have found another solution that works nearly perfect for me, by just hiding the Taskbar and the Start button by simply sending both the WM_HIDE message:
Handle = FindWindow("Shell_TrayWnd", "");
...
ShowWindow(Handle, SW_SHOW);
The only problem I have with that solution is that the taskbar is not hidden permanently, i.e. as soon as one element is activated that does not have the focus, which on the taskbar leads to the item flashing in yellow, the taskbar gets visible again.
I'm not sure if there is a way to prevent Windows from re-enabling the visible flag of the taskbar in some way, or a method to hook to the SW_SHOW in C# though.
My manager thinks he's seen other people "lock" the windows on screen keyboard to the bottom of their applications, effectively docking it with their window, and wants me to reproduce this. They're using vb6 and occasionally vb.net.
I've done a good amount of googling on the subject and I'm resorting to looking into the windows SDK at the minute, but if someone out there can save me a few days of pain by either confirming that it's not possible or pointing me in the right direction if it is I'd appreciate it.
I find that the keyboard locks if I open it from the taskbar icon. It will stay on the bottom of the screen then, even if I'm not on a text field.
No idea how to achieve that programmatically though
You know the neat text zoom feature in VS2010 where you hold down Ctrl and then use your scroll wheel? Well, this seems to happen by default (and without ever pressing Ctrl) to nearly every file I open.
Usually I open a file and have to scroll to some lower point, but instead it starts zooming the text! I have found that by tapping the Ctrl key VS then realizes that it should scroll instead of zoom, but it's still very annoying.
Any ideas?
CTR+Shift worked for me.
(Works for Microsoft Office as well)
I believe they consider this to be a feature, and I haven't found a way to turn it off. I think it only happens if you are holding the control key while trying to use the mouse wheel, but I've found it gets locked in that mode sometimes. Personally I think this feature is anoying as &^%% and I wish they would take it out.
Check your Accessibility settings, you might have "locked" it down my accident
Under Windows 7 they are here:
Control Panel\Ease of Access\Ease of Access Center