I updated to High Sierra earlier this week and am having trouble running compass. When trying to run compass watch it gives me this error:
compass watch
-bash: /usr/local/bin/compass: /System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/bin/ruby: bad interpreter: No such file or directory
Tried to update ruby and failed. I have version 2.3. I don't have version 2.0 thats its looking for. so tried to change the path, failed again.
Also tried to update/reinstall compass.
I get an error saying I don't have permission to make changes.
I had the same problem. Solved it by running:
$ sudo gem uninstall compass
$ gem update --system
$ sudo gem install compass
Hope it works for you!
UPDATE:
From ewartx: https://github.com/Compass/compass/issues/2129
\curl -sSL https://get.rvm.io | bash -s stable
rvm install 2.0.0
gem install compass
If you don't want to revert, this worked for me (slightly modified from an answer here https://github.com/oklai/koala/issues/679)
Open Terminal
Install Homebrew: ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
Do not close Terminal, open Mac Appstore and check Update, install all XCode Command Line Tools updates OR in my case, XCode Command Line Tools started install automaticly throught Terminal right after step
2.
Back to Terminal
Install Ruby: brew install rbenv ruby-build
At this point, install Compass (instead of SASS in original answer)
Install Compass gem: sudo gem install -n /usr/local/bin compass
I just ran into this as well. The solution was to make sure that the xCode command line tools were installed.
Run the following to install the needed development files.
xcode-select --install
Per #Adi's solution run this to uninstall compass and reinstall it.
sudo gem uninstall compass
gem update --system
sudo gem install compass
After that is complete you should be able to use compass and can re-run your command.
I have a problem installing sass. I tried gem install sass, it doesnt work so I tried sudo gem install sass but it still doesn't work. What should I do?
PASs-iMac:~ user$ sudo gem install sass
ERROR: While executing gem ... (Errno::EPERM)
Operation not permitted - /usr/bin/sass
PASs-iMac:~ user$
Try this command instead
sudo gem install -n /usr/local/bin sass
I am not able to install and run fakes3 gem on El Capitan Beta 5.
I tried:
sudo gem install fakes3
ERROR: While executing gem ... (Errno::EPERM)
Operation not permitted - /usr/bin/fakes3
Then I tried doing it the cocoapods way. It worked for cocoapods but not for fakes3.
mkdir -p $HOME/Software/ruby
export GEM_HOME=$HOME/Software/ruby
gem install cocoapods
[...]
1 gem installed
gem install fakes3
ERROR: While executing gem ... (Gem::FilePermissionError)
You don't have write permissions for the /Library/Ruby/Gems/2.0.0 directory.
Disclaimer: #theTinMan and other Ruby developers often point out not to use sudo when installing gems and point to things like RVM. That's absolutely true when doing Ruby development. Go ahead and use that.
However, many of us just want some binary that happens to be distributed as a gem (e.g. fakes3, cocoapods, xcpretty …). I definitely don't want to bother with managing a separate ruby. Here are your quicker options:
Option 1: Keep using sudo
Using sudo is probably fine if you want these tools to be installed globally.
The problem is that these binaries are installed into /usr/bin, which is off-limits since El Capitan. However, you can install them into /usr/local/bin instead. That's where Homebrew install its stuff, so it probably exists already.
sudo gem install fakes3 -n/usr/local/bin
Gems will be installed into /usr/local/bin and every user on your system can use them if it's in their PATH.
Option 2: Install in your home directory (without sudo)
The following will install gems in ~/.gem and put binaries in ~/bin (which you should then add to your PATH).
gem install fakes3 --user-install -n~/bin
Make it the default
Either way, you can add these parameters to your ~/.gemrc so you don't have to remember them:
gem: -n/usr/local/bin
i.e. echo "gem: -n/usr/local/bin" >> ~/.gemrc
or
gem: --user-install -n~/bin
i.e. echo "gem: --user-install -n~/bin" >> ~/.gemrc
(Tip: You can also throw in --no-document to skip generating Ruby developer documentation.)
In my case, I had to re-install Ruby using Brew. That seems to have solved the problem as I can install gems again.
brew install ruby
After this, you need to log out and log back in, either graphically or just restarting your terminal.
That is because of the new security function of OS X "El Capitan".
Try adding --user-install instead of using sudo:
$ gem install *** --user-install
For example, if you want to install fake3 just use:
$ gem install fake3 --user-install
sudo gem install -n /usr/local/bin cocoapods
Try this. It will definately work.
You have to update Xcode to the newest one (v7.0.1) and everything will work as normal.
If after you install the newest Xcode and still doesn't work try to install gem in this way:
sudo gem install -n /usr/local/bin GEM_NAME_HERE
For example:
sudo gem install -n /usr/local/bin fakes3
sudo gem install -n /usr/local/bin compass
sudo gem install -n /usr/local/bin susy
Looks like when upgrading to OS X El Capitain, the /usr/local directory is modified in multiple ways :
user permissions are reset (this is also a problem for people using Homebrew)
binaries and symlinks might have been deleted or altered
[Edit] There's also a preliminary thing to do : upgrade Xcode...
Solution for #1 :
$ sudo chown -R $(whoami):admin /usr/local
This will fix permissions on the /usr/local directory which will then help both gem install and brew install|link|... commands working properly.
Solution to #2 :
Ruby based issues
Make sure you have fixed the permissions of the /usr/local directory (see #1 above)
First try to reinstall your gem using :
sudo gem install <gemname>
Note that it will install the latest version of the specified gem.
If you don't want to face backward-compatibility issues, I suggest that you first determine which version of which gem you want to get and then reinstall it with the -v version. See an exemple below to make sure that the system won't get a new version of capistrano.
$ gem list | grep capistrano
capistrano (3.4.0, 3.2.1, 2.14.2)
$ sudo gem install capistrano -v 3.4.0
Brew based issues
Update brew and upgrade your formulas
$ brew update
$ brew upgrade
You might also need to re-link some of them manually
$ brew link <formula>
As it have been said, the issue comes from a security function of Mac OSX since "El Capitan".
Using the default system Ruby, the install process happens in the /Library/Ruby/Gems/2.0.0 directory which is not available to the user and gives the error.
You can have a look to your Ruby environments parameters with the command
$ gem env
There is an INSTALLATION DIRECTORY and a USER INSTALLATION DIRECTORY. To use the user installation directory instead of the default installation directory, you can use --user-install parameter instead as using sudo which is never a recommanded way of doing.
$ gem install myGemName --user-install
There should not be any rights issue anymore in the process. The gems are then installed in the user directory : ~/.gem/Ruby/2.0.0/bin
But to make the installed gems available, this directory should be available in your path. According to the Ruby’s faq, you can add the following line to your ~/.bash_profile or ~/.bashrc
if which ruby >/dev/null && which gem >/dev/null; then
PATH="$(ruby -rubygems -e 'puts Gem.user_dir')/bin:$PATH"
fi
Then close and reload your terminal or reload your .bash_profile or .bashrc (. ~/.bash_profile)
This is the solution that I have used:
Note: this fix is for compass as I wrote it on another SO question, but I have used the same process to restore functionality to all terminal processes, obviously the gems you are installing are different, but the process is the same.
I had the same issue. It is due to Apple implementing System Integrity Protection (SIP). You have to first disable that...
Reboot in recovery mode:
Reboot and hold Command + R until you see the apple logo.
Once booted select Utilities > Terminal from top bar.
type: csrutil disable
then type: reboot
Once rebooted
Open terminal back up and enter the commands:
sudo gem uninstall bundler
sudo gem install bundler
sudo gem install compass
sudo gem install sass
sudo gem update --system
The the individual gems that failed need to be fixed, so for each do the following:
On my machine this was the first dependency not working so I listed it:
sudo gem pristine ffi --version 1.9.3
Proceed through the list of gems that need to be repaired. In all you are looking at about 10 minutes to fix it, but you will have terminal commands for compass working.
Screenshot
If the gem you are trying to install requires xml libraries, then try this:
sudo gem install -n /usr/local/bin <gem_name> -- --use-system-libraries --with-xml2-include=/usr/include/libxml2 --with-xml2-lib=/usr/lib/
Specifically, I ran into a problem while installing the nokogiri gem v 1.6.8 on OS X El Capitan
and this finally worked for me:
sudo gem install -n /usr/local/bin nokogiri -- --use-system-libraries --with-xml2-include=/usr/include/libxml2 --with-xml2-lib=/usr/lib/
To make sure you have libxml2 and libxslt installed, you can do:
brew install libxml2 libxslt
brew install libiconv
and then check to make sure you have xcode command line tools installed:
xcode-select --install
should return this error:
xcode-select: error: command line tools are already installed, use "Software Update" to install updates
Reinstalling RVM worked for me, but I had to reinstall all of my gems afterward:
rvm implode
\curl -sSL https://get.rvm.io | bash -s stable --ruby
rvm reload
I ran across the same issue after installing El Capitan, I tried to install sass and compass into a symfony project, the following command returned the following error:
$ sudo gem install compass
ERROR: Error installing compass:
ERROR: Failed to build gem native extension.
/System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/bin/ruby extconf.rb
checking for ffi.h... /System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/lib/ruby/2.0.0/mkmf.rb:434:in `try_do': The compiler failed to generate an executable file. (RuntimeError)
So I then tried to install sass with:
$ sudo gem install sass
Got the same error message, after some googling I managed to install sass using the following command:
$ sudo gem install -n /usr/local/bin sass
The above worked for me with installing sass but did not work for installing compass. I read that someone somewhere had opened an instance of xcode then closed it again, then successfully ran the same command after which worked for them.
I attempted to open xcode but was prompted with a message saying that the version of xcode installed was not compatible with El Capitan.
So I then updated xcode from the app store, re-ran the following command which this time ran successfully:
$ sudo gem install -n /usr/local/bin compass
I was then able to run $ compass init
I now have all my gems working and can proceed to build some lovely sass stuff :)
I had to rm -rf ./vendor then run bundle install again.
You might have two options:
If you've installed ruby and rails, you can first try running the command:
rvm fix-permissions
You can uninstall ruby completely, and reinstall in your ~ directory aka your home directory.
If you're using homebrew the command is:
brew uninstall ruby
For rails uninstall without homebrew the command is:
rvm remove
This should reinstall the latest ruby by running command:
curl -L https://get.rvm.io | bash -s stable --rails<br>
Mac has 2.6.3 factory installed, and it's required... if not run this command:
rvm install "ruby-2.6.3"
and then:
gem install rails
You'll get a few error messages at the end saying you have to add some other bundles...
Just make sure you're in the home ~ directory when you're installing so the permissions won't be an issue, but just in case...
I again ran:
rvm fix-permissions
and:
rvm debug
which told me I had to download yarn, I didn't save the output for it. Basically I did whatever the prompt told me to do if it had to do with my OS.
-D
I don't like to install stuff with sudo.
once you start with sudo you can't stop..
try giving permissions to the Gems directory.
sudo chown -R $(whoami) /Library/Ruby/Gems/2.0.0
sudo chown -R $(whoami):admin /usr/local
That will give permissions back (Homebrew installs ruby there)
I'm running Linux Mint 15. I don't know if this a Path problem but I install compass with gem install compass and it says 1 gem installed. Then when I type compass -v I get the following:
The program 'compass' can be found in the following packages:
* libcompass-ruby1.8
* ruby-compass
Try: sudo apt-get install <selected package>
EDIT
had to put source ~/.bash_profile inside my .bashrc file. But now the error is
/home/mike/.rvm/gems/ruby-2.0.0-p247/gems/bundler-1.3.5/lib/bundler/definition.rb:16:in `build': /Gemfile not found (Bundler::GemfileNotFound)
Well this is strange. I ended up wiping everything and re-installing RVM, Ruby, RubyGems, and Compass and now it all works fine. Don't really know what happened.
I'm trying to install Compass and Susy on my Ubuntu 12.04.
What I have tried are the following steps on the console:
sudo apt-get install rubygems1.8
sudo gem install rubygems-update # Instead of sudo gem update --system
sudo update_rubygems
sudo gem install compass # Installing Compass & Sass
sudo gem install susy
So the gems are installed and will be listed when I do the following command:
gem list
But now, when I try to create a new compass project with
compass create project
I get the following error:
/usr/local/bin/compass: /usr/bin/ruby1.9.1: bad interpreter: No such file or directory
My current ruby version is 1.8.7. So I installed ruby 1.9.1 and get it working.
The console still says the current ruby version is 1.8.7
My question: Do I have to run with both ruby versions to get that working? Is there another way under ubuntu? It's working, I know, but it's a bit confusing.
Using Ubuntu's package manager for multiple ruby versions is a bit of a lost cause.
Most people use rvm, which allows you to install and switch between multiple rubies very easily.
Other popular options are rbenv and chruby. It's just a question of personal preference, but I'd say that rvm has the slight edge for beginners.
Also, I wouldn't recommend installing ruby 1.9.1 - it's best to use 1.9.3 as there are some compatibility issues with other 1.9.x versions.
You can then install compass and sass via ruby gems (rather than aptitude):
$ gem install compass
$ gem install sass
This simple command works on ubuntu 14.10
sudo apt-get install ruby-compass
RVM is awesome and really easy to install. I managed to install rvm, compass, and sass with these commands in my terminal:
Firstly:
curl -L https://get.rvm.io | bash -s stable --rails --autolibs=enabled --ruby=1.9.3
This will instal rvm, it will put a command in ~/.bash_profile to load rvm automatically, except this isn't what Ubuntu uses so put this line into your ~/.bashrc file:
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" # Load RVM into a shell session *as a function*
Then simply run:
gem install compass
gem install susy #(or sass)
Install build-essentials and ruby-dev packages to install compass without errors.
sudo apt-get install build-essential
sudo apt-get install ruby
sudo apt-get install ruby-dev
sudo gem install compass
Masterchief's answer is close, but didn't work for me. This web page provided a clear and reliably working way to install rvm on my ubuntu server instance: http://ryanbigg.com/2010/12/ubuntu-ruby-rvm-rails-and-you/