Closed. This question needs debugging details. It is not currently accepting answers.
Edit the question to include desired behavior, a specific problem or error, and the shortest code necessary to reproduce the problem. This will help others answer the question.
Closed 10 months ago.
Improve this question
I decided recently that I want to start learning to code. I chose python as my first language because of it's versatility and Open Source connections. Now, of course to learn any programming language, first you have to be able to practice with it by writing code and running it.
I have Python beginner tutorials I am using but as soon as I got to the point where I wanted to run a simple Hello World message, I couldn't figure out how to get my document to actually RUN. I downloaded LiClipse with the hopes of using PyDev. I read that you can run a code directly from PyDev.
Wow, what a confusing mess! I downloaded the instant install version of LiClipse and I had to manually update the pip because it was out of date and that took an hour of research all on it's own to figure out how to do it.
Now that I have the interpreter set up correctly with the most recent pip...(I THINK), when I try to run any code I write, it doesn't let me. It wants me to save it first, which of course is quite logical. But when I try to save it, it says there is no folders to save to. How can there be no folders? I have been reading the install help, but it doesn't say anything about this issue. Or maybe it did explain how to fix this issue and I simply didn't understand all the jargon included in the configuration documentation. It kept instructing me to do technical things I couldn't understand.
Can anyone tell me what is going on? Shouldn't this all be ready to go when I used the "instant install" ?? I am just a beginner here, I don't know all this technical installation jargon. If anyone can help me get this setup, please let me know.
I really want to start learning. But I can't if I don't have the right tools.
Yeah, the technical jargon can be really confusing in the beginning. I've never heard of LiClipse but I can give you a few tips to get started:
Use a good IDE or Editor. For beginning VsCode with the Python PlugIn is quite good. You can also use PyCharm (the free version is enough) but that IDE is quite confusing.
Get comfortable with the commandline. On Windows you can invoke Python by running py on Linux with python3. You open the commandline on Windows by opening the startmenu, entering cmd and hitting enter.
You will have to make sure Python is in your "PATH" enviroment variable. That is a variable telling the Operating System where to find your programms. It should have asked you whether you want to add Python to your PATH during the install.
You run your python programm by saving it as a .py file and running py <filename.py> or python3 <filename.py> on Windows or linux respectively. You have to be in the directory where you saved your file of course.
I hope I could help you. Please mark this answer as accepted if it did answer your question or helped you with your issue.
I want to start by saying I'm mainly experienced in C & C++, not Python, but with programming in general many of the concepts carry over. I also don't have enough rep to comment, or I'd ask for some clarification on how familiar you are with the commandline.
I'm going to assume you're on Windows since you didn't mention the platform.
I wrote this like a tutorial, because I found those to be very helpful when I first started programming.
I can't recommend this enough, start off by using the commandline!
I think you complicated things more by searching for a text editor that can also run code. In order to get something like that working for your setup you need to know what's happening behind-the-scenes first.
Once you have a grasp of how to write & execute Python code, then you can move on to an IDE or advanced text editor like Visual Studio Code or LiClipse with confidence.
R+Click on the Start Menu, then click on Windows PowerShell to open a terminal.
Take a moment to note the filepath shown before the blinking cursor.
This is known as the Working Directory, which works similar to how the file explorer only allows you to "view" one directory at any given time; You can open multiple explorer windows side-by-side, but you can't view multiple directories at the same time in a single window.
You can run commands by typing them and pressing Enter.
You can also use the Tab key to autocomplete things like directory/file names, commands, etc. after typing a few characters.
Now let's create a workspace directory for your first project.
This can be anywhere that you choose, but for the sake of simplicity I'll be using my User directory which is usually where PowerShell will start by default.
To create a new directory named _workspace, use the mkdir (Make Directory) command like so:
mkdir _workspace
Now let's change our working directory to _workspace by using the cd (Change Directory) command like so:
cd _workspace
This directory is empty, but if you want to view the contents of a directory you can use the ls (List Directory) command:
ls
Since this is an empty directory, nothing will happen.
Next, we'll create a Python script file using the touch command, which creates empty files:
touch HelloWorld.py
Now that we have a script file, open HelloWorld.py in Notepad by running this command:
notepad HelloWorld.py
If you use a dark desktop theme, now is the time when your retinas may be seared out by the intensity of Notepad's white color scheme.
Now, let's add the code to print "Hello World!" in Python:
print("Hello World!")
Once you're done, you can save & close Notepad to save your retinas.
Now it's time to run the program! In the PowerShell window, enter this command:
py HelloWorld.py
which will show:
Hello World!
If you see an error saying this:
The term 'py' is not recognized as the name of a cmdlet, function, script file, or operable program.
You should re-install Python and make sure you check this box in the installer:
After re-installing Python and checking the Add to PATH box, close and reopen the PowerShell window, enter the cd _workspace command again, followed by py HelloWorld.py, which should be successful this time.
I hope I could be of some help, if so, I'd greatly appreciate marking this answer as accepted so I can write comments. Happy coding!
If you are using Linux following will work.
Install python3 first (Its better to stuck on python3 now. Once you get use-to then you can code in python2.7 also.)
Open a terminal, go the folder contains your code. If your source code is in hello.py then type python3 hello.py on terminal. It will execute and print the output on terminal.
The suggestions given by both #radj and #C. Dautermann are excellent.
Like others here, I will be assuming that you are on Windows.
Before jumping into LiClipse and PyDev, I highly recommend making sure that Python and packages (such as pip) are functioning on their own first. Command line is a great tool for this.
Windows Command Line can be accessed in a variety of ways, one of which is to go to your start menu and search "cmd." Command Prompt should return. In the command prompt, run the following:
python
This should return the version of Python installed on your machine if it is configured properly. For example, you may see the following:
Python 3.10.1 (...)[...] on win32
If this does not appear, I recommend uninstalling Python and reinstalling. In the installer, you will want to check the "Add Python ... to PATH" option. This will configure your environment variables on your machine. If you plan on running multiple versions of Python down the road, don't worry; you can use batch files to set the PATH variable to another version.
Once you have Python working, your command prompt will lead with the following:
>>>
Notice that there is no longer a file path followed by >>. This is because you are now in the Python interpreter. Congratulations!
To exit the Python interpreter, enter Ctrl+Z. It should appear as the following:
^Z
After we know Python works, we will check to see that pip works. Ensure you have pip installed by entering the following:
python -m pip --version
You should then be able to see the pip version. For example:
pip 22.0.3 from C:\...
If pip is not working, you can consult this documentation on pip to make sure pip gets installed properly.
Once pip is working, again, congratulations! You've gotten over some of the biggest hurdles. At this point, you can open up any text editor, type in:
print('Hello World!')
save the file with the extension .py, then run the script through command prompt. To run a script through the command line, you have to cd to the file location, then run the script with python, like so:
cd filepath
python filename.py
Where filepath is the path to the Python file and filename is the name of the file. For example:
cd C:\Users\name\Documents\PythonPractice
python helloworld.py
Usually, command line is all that is needed when starting out with Python outside of a text editor. Notepad comes standard on Windows computers, but there are plenty of other editors out there. Sublime text and Notepad++ are some of my favorites, personally.
Now, if you're able to run everything prior, the good news is that your Python and pip are both working, and you have everything you need to get started learning Python. If Python and/or pip are not functioning, there's thankfully a huge body of troubleshooting tips out there.
Unfortunately, from what I get of your initial post, you might be struggling with configuring LiClipse. I personally do not use LiClipse, nor do I use PyDev, so my help at this point may be limited. You may want to uninstall and reinstall after confirming your Python and pip work as a first step. After that, perhaps check that you are following the practices outlined in the LiClipse manual. Worst case scenario, you can try a different version of Python (I believe it has some Python3 incompatibilities), try running PyDev independent of LiClipse, or look at a different tool. If you believe the problem lies with file locations/existence, I would look at radj's post or play around in File Explorer to see what is going on for yourself.
Again, to get familiar with Python, you don't even need these extra tools. All you need is a text editor and the command line to get started.
Some other tools to help you get started:
PyPI
A venv virtual environment tutorial
PyDev
A comparison of LiClipse alternatives in case you continue to struggle
Hope this helps. Happy Coding!
Hi I follow this guideline for sudo-less installation https://guides.cocoapods.org/using/getting-started.html and I stuck on /Users/eloy/.gem/ruby/2.0.0/bin/pod install
Terminal says [!] No Podfile found in the project directory.
Command gem which cocoapods correctly shows path to cocoapds so I guess installation succeed. I tried changing paths in .profile file but it's not a problem. Please give me some ideas.
I followed the same guidelines for sudo-less installation, and I had the same results and issues. I'm very new to all of this, so take this answer with a healthy dose of skepticism unless someone more experienced confirms it.
After some poking around on google, I stumbled upon this article.
Following these instructions resolved my issues, so I hope they help you as well.
EDIT: This temporarily adds CocoaPods to your path. I am using a Mac that uses a zsh shell for the terminal.app. I'm not sure what shell you have, but for Macs you'll need to edit your .zshrc file (or create one because you will not have a .zshrc file on your Mac if you have not created one yourself already). I found this answer that shows how to create the .zshrc file through the terminal. You can find the .zshrc file you have created by navigating to Macintosh HD > Users > [INSERT_USERNAME] and pressing "cmd + shift + ." to show hidden files. Scroll down until you see the .zshrc file, open it with a text editor, and input the code from the first page I linked. Save it and exit. Now you should always have CocoaPods in your path every time you open up the terminal!
Probably an easier way to do this, but it worked for me.
I'm aware of the other threads on this topic but they are autoraised-based and/or all the answers point to software that's no longer being developed. I'm just looking for this simple feature: focus follows mouse WITHOUT autoraise for Mac.
Zooom2 was able to perform this, but they are no longer developing their software.
I'm not using the terminal and need to copy/paste and read between multiple programs with multiple windows, someone please tell you've found a solution to this?
chunkwm has recently added a setting ffm_disable_autoraise which works well for me on macOS Mojave. To enable only the Focus Follows Mouse feature, follow the install steps then edit ~/.chunkwmrc to comment out undesired plugins and enable FFM
# chunkc core::load border.so
# chunkc core::load tiling.so
chunkc core::load ffm.so
and disable autoraise
chunkc set ffm_disable_autoraise 1
The other available plugins are useful but are not the subject of this question.
Edit 2019-09-12:
chunkwm has been superseded by yabai. To install:
brew tap koekeishiya/formulae
brew install yabai
mkdir -p ~/.config/yabai/
printf 'yabai -m config focus_follows_mouse autofocus' >> ~/.config/yabai/yabairc
brew services start yabai
I do miss one thing in Yabai - the ability to focus to a subwindow within a focussed window. That would be gold!
I am using AutoRaise. The modified fork from fredngo works well for me. Check out at https://github.com/sbmpost/AutoRaise/issues/47#issuecomment-1129157693.
Over the weekend I reengineered my .vim directory on OS X to use pathogen.vim. This worked perfectly and I checked everything into github once I finished.
Today, I pulled everything down to my Windows installation of vim and found out it doesn't work here.
The issue I'm encountering is that pathogen.vim doesn't load any plugins, and further, prevents loading anything else from my vimfiles directory (e.g., colorschemes). I've tried to debug it a little bit using vim -V. From what I can tell, pathogen.vim has a function called pathogen#glob_directories which is returning [] when it should be returning a list of all plugin directories. But I'm not really sure why this is happening.
Can someone help me figure out how to get pathogen working on Windows?
My .vim files on github and in particular, my .vimrc.
Here is the output of vim -V with various error reporing levels.
vim -Vlog
vim -V12log
vim -V15log
I have pathogen setup and working fine under Linux, but when I try to use the some configuration with gvim73 under windows it doesn't work at all. I don't get any errors but it does nothing.
Here is my dotfiles repository up on git. I've checked this out to ~/vimfiles and I added the following to _vimrc:
filetype off
call pathogen#helptags()
call pathogen#runtime_append_all_bundles()
I've tried just about everything including putting the autoload/pathogen.vim and bundles/ folders in the /vim73 directory under program files. Nothing.
Does anyone have some experience with this? I'm assuming there is something windows specific that needs to happen to make this work.
Edit: It is probably also worth noting I can run pathogen#runtime_append_all_bundles() even using tab completion so pathogen is being loaded, but my plugins are just not working.
I'm not sure it will help but here is my working configuration:
d:\soft\vim\vim73\ - gvim itself, i.e.
pathogen.vim is copied into the
d:\soft\vim\vim73\autoload\
d:\soft\vim\vimfiles\bundle - directory
for plugins
Corresponding lines from configuration file d:\soft\vim\_vimrc:
" Use pathogen to load plugins from bundle directory
filetype off
call pathogen#runtime_append_all_bundles()
call pathogen#helptags()
Also I changed pathogen#helptags because original didn't work for my paths:
dir[0 : strlen($VIM)-1] !=# $VIM has been changed to stridx(dir, "bundle") != -1
It's an old question, but I had the same issue and solution as the OP, and it has a mildly annoying origin. I was using the following script to install everything on Windows (Vista+ and run as admin if you want the mklink part to work):
cd "%UserProfile%"
rmdir vimfiles /S /Q
git clone http://github.com/brymck/dotvim.git vimfiles
del _vimrc
mklink _vimrc vimfiles\vimrc
cd vimfiles
git submodule init
git submodule update
The above is just a Windows-y version of a Vimcast on syncing your Vim preferences with GitHub and is fairly straightforward, so I figure others may be doing something similar.
Anyway, your experience may differ (and this doesn't apply to Cygwin), but when I just copied and pasted this into the terminal, git submodule update got "eaten" while git submodule init was running. I didn't figure it out initially because this had never happened to me on Linux. In short, wait until everything else has completed before running git submodule update and you should be golden. (Also, FWIW, I'm using the current version of pathogen, which was last updated September 25, 2011.)
For me renaming the .vim folder into vimfiles solved the problem for Vim 7.4.
I had some kind of issue on Windows when I used the pathogen version provided by Vim.org
However, using github pathogen head, the issue was fixed.
I think the latest release from Vim.org is from January last year, and the latest commit on github is from November.
Specifically, I had this issue with after directory:
https://github.com/tpope/vim-pathogen/issues/closed#issue/12
I know this is a long time ago, but maybe it will help someone ... I had the same issue. It wouldn't give me any errors, but no plugins would be loaded. I then RTFM and noticed that he explicitly states at the top of this page that it should go in your vimrc not gvimrc. After I changed that I had no problems.