I want to filter a column that spans from 2014-2019 to 2017-2018 in VS with SSIS.
I have tried different things but none seem to work.
Derived Column date in your example is likely what you're looking for.
The Week column is of a date type DT_DBDATE. Your string "2017-01-01" should be getting promoted to a data date type so the boolean check will identify if the lower bound is being met.
You'd either need to create a second derived column to check against the upper bound or as #vhoang indicates, change the logic to just extract the year from the date column.
YEAR([Week]) >= 2017 && YEAR([Week]) < 2019
Now, you have a column that flags each row as meets criteria or not (year is 2017 or 2018)
You will then need to do something with that. The SSIS something is called a Conditional Split. I would add a new path called OutOfConsideration and the logic there would be the inverse of our above Derived Column Derived Column date which is true if the year meets our criteria.
![Derived Column date]
Now connect your destination, or additional processing steps, to the Conditional Split's default output path. If you need to do processing on the invalid data, that'd be the OutOfConsideration path.
Finally, to get the best performance out of SSIS, only bring the rows into it that you need. If the source data is in a system that supports filtering, filter the data there. It is easy to click click click design SSIS packages but it is better long term for you to write custom queries to only bring the required columns and rows into the data flow. Less work for all around, lower maintenance cost, etc
This is might be a basic question but just curious to know, My source is a flat file and do we need to maintain same field order between source and source qualifier objects in Informaitca?
Thanks!
No but you need to maintain field order against list of fields returned by the query... especially if you use an sql override
No, you should not.You even may need to change this order if you are going to Sort data by Source Qualifier. If you set integer value for ‘Number of Sorted Ports’ SQ property Informatica Information Service(IS) will look at that number of ports starting at the top. So, you may need to rearrange ports order by moving sorting ports at top.
On a number of reports I have noticed that setting sort options through the tablix properties does not work. I choose the data I'd like to sort by (date) and set the option (Z to A), but the report still shows unsorted. Has anyone else seen this issue? I have read that updating the report xml to include the sort may be what needs to be done because the report builder does not preserve the changes made. Haven't gone down that road yet as I'm looking to see if there's a fix already identified.
Date Type Lead Name State distance Consultant ZIP State 1 Level Reason url
Those are the columns from the export with data filling each column. Can't give too much info because it shows phone numbers and addresses.
One option is to sort the data in your dataset. Then you can leave it and SSRS will honor that.
As the others mentioned, make sure you check the datatype so it's not trying to sort the dates as a string.
Set the sort priorities at the group level, not on the table or dataset properties.
You should never have to edit the XML to get this to work. This is a basic built-in feature that most reports use.
Do you have groups on your tablix? if yes, did you try sorting it with the Row Groups or Column Groups at bottom instead of the sorting properties of the tablix?
SSRS 2008
I've defined Interactive sort on a column that has also null values.
I want the nulls to always appear at the end of the report regardless of whether the
direction is Ascending or Descending.
Report is displayed by Reportviewer in VS2010
User clicks on column header to activate interactive sort
All help/suggestions are welcome.
I can think of one workaround here, which may or may not help, but at worst might give you more ideas.
What you can try doing is actually use two tables, and apply the sort to only one, but make it look like one table in the report.
Create two tables:
Apply filters to the tables to show non-null values in the first and null values in the second.
I used the expression:
=IIf(IsNothing(Fields!val2.Value), "NULL", "NOTNULL")
Apply Interactive Sorting to the first table.
This gives the results:
So in this simple case it's achieving what you're after.
Since it's actually two objects, you might get breaks in places users don't expect; this could be mitigated by keeping the objects together with a Rectangle.
If you're looking for multiple columns this might not be suitable, but hopefully it helps.
I am trying to remove all references to a table from a Crystal XI report. Crystal is telling me that a column from that table is currently being used, because there is a little green check mark over the field in the field viewer. Also, if I try to remove the entire table, I get a warning. The warning is almost useless though because it doesn't tell me where the field is used. Now, back when programmers were real programmers, and mice were things cats chased, I could just grep a directory or file and find all references to a variable I was interested in. But how do I do this in Crystal? I have already tried exporting the report to a Report Definition, which helped find some instances of the troublesome field. Unfortunately, that format does not include all formulas, just some. Please tell me I don't have to buy a third party app (or write my own COM thingy) just to do this seemingly simple thing.
EDIT to add details about tangential point:
In case anyone is wondering, I am not crazy - I have duplicated the issue where a formula's definition does not show up in the exported Report Definition. I created a new blank report, created one formula named stealth that returns 1234. I then used that formula in the Section Expert for the details section, in the "suppress" formula, setting it to {#stealth} == 0. the use of the formula shows up, but not the definition. So when my unwanted column was used in the formula, I was not be able to find it! Here's what the rpt def looks like (after deleting some blank lines):
Crystal Report Professional v11.0 (32-bit) - Report Definition
1.0 File Information
Report File:
Version: 11.0
2.0 Record Sort Fields
3.0 Group Sort Fields
4.0 Formulas
4.1 Record Selection Formula
4.2 Group Selection Formula
4.3 Other Formulas
5.0 Sectional Information
5.1 Page Header Section
Visible, Keep Together
5.2 Page Footer Section
Visible, New Page After, Keep Together, Print At Bottom of Page
5.3 Report Header Section
Visible, New Page Before
5.4 Report Footer Section
Visible, New Page After
5.5 Details Section
Visible
Subsection.1
Visible, Keep Together
Format Formulas
Visible: {#stealth}= 0
If all else fails ...
File -> Export -> Export Report, then choose the Report Definition (TXT) option.
That will give you a plain-text representation of every element of the report. You can grep or CTRL-F or (insert search tool of your choice) through that. "Find in Formulas" usually works, but I've had to go the export route a couple of times, for no apparent reason.
Edit: Of course, if I'd bothered to completely read your post, I'd see that you've already done this.
Very curious.
If you right click on the field in Field Explorer and select Find in Formulas, it should bring up a dialog listing all of the places it is being used in formulas. On the left hand side of the dialog is a tree of all the possible places it could be, including oddball places like record selector and page formatting functions. Unfortunately, it does not seem to list running total fields.
EDIT: Oops, all the places it exists is listed at the bottom of the dialog; the tree view is the entire "DOM" of the report.
I know this is an old post, but...
Not knocking the Find in Formulas, it's been saving me today, but i was having trouble finding the last instance of the field. Even after all of the formulas and the droppings on the report were taken care of, I still had one lone use hiding somewhere.
I found it hiding as a Subreport Link. Right click on the Subreport -> "Change Subreport Links..." and there was the culprit. Dropping in this post because I figured someone else might have this problem too.
Fields can also sometimes be hiding within "Record Sort Expert"
Responding to an old post, but ran into a similar issue. I had a group based on the formula I wanted to delete that had a specified order. When I changed the grouping to a different field, the specified order remained. When I removed the specified order, my formula could be deleted.
This was tested on XIr2...
You change the tables datasource through the "set datasource location" dialog. Now, when it goes into the column mapping mode, uncheck match-type and pick a new column that would cause an error in a formula. (i.e if the column you're looking for is a string replace it with a datetime column). Go to the preview and you should get an error box like "A string is required here.", close that error and up pops the offending formula!
One more suggestion. After following a lot of the suggestions here, my report was still telling me the formula was in use. I had to close the report. When I opened it again, the check mark was gone and it let me delete it. This was on Crystal v 11.0.0.1282
In my case the Formula Field happened to be part of an old Running Total Field, which itself was not included in the report. Once I deleted this old Running Total Field I could delete the unused Formula Field.
Very late, but i use CR 2008 (12.3.0.601) and just today (6/16/2015) i am trying to document only the formulae of my report. I knew about exporting the Report Definition, and Finding a Formula in all Formulae. But there are about 50 Formulae. I discovered that the exported Report Definition didn't document all of my Formulae, but I didn't bother to uncover the logic behind that; instead, i plopped all Formulae into a section, then exported the Report Definition. Voila. Of course, i still need to cull all the unnecessary definition elements. But at least i have all Formulae.
So with all the great selections.. I still had one instance hiding from me. I found out where it was by creating a clone of the data table and renaming\deleting the field.
I then used the "Set Database Location" as suggested above to point to my new table. It did error out when it could not find that field but still didn't tell me where it really was (it just said report field).
I did NOT map it and clicked continue which deleted the field from the report. I then mapped it back to the real table and I was good.
In my case, there was a Chart, and the field was being used as one of the "on Change" fields.
Although an old post, this functional gap still exists within Crystal Reports itself. We have a fully functional 14 day trial of our third party software that uses the latest Crystal.net API to search for plain text within a library of Crystal RPT files in one fell swoop. Also searches the data saved within reports, and text within labels ... as well as datasource behind all your reports ( stored procedures, views, and table data ) with support for SQL Server, SQL Azure, MySQL, Oracle, Amazon RDS, DB2 and Access.
More info and trial downloads at http://www.finditez.com
Note, you will need to download and install the compatible SAP Crystal.net runtime connector for searching your RPT file library.