I am trying to install Chocolatey
https://chocolatey.org/install
and using the command:
#"%SystemRoot%\System32\WindowsPowerShell\v1.0\powershell.exe" -NoProfile -InputFormat None -ExecutionPolicy Bypass -Command "iex ((New-Object System.Net.WebClient).DownloadString('https://chocolatey.org/install.ps1'))" && SET "PATH=%PATH%;%ALLUSERSPROFILE%\chocolatey\bin"
It is showing error:
Unable to unzip package using 7zip. Perhaps try setting $env:chocolateyUseWindowsCompression = 'true' and call install
again. Error: 7-Zip encountered a fatal error while extracting the files
At line:221 char:9
+ 2 { throw "$errorMessage 7-Zip encountered a fatal error while ex ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OperationStopped: (Unable to unzip...cting the files:String) [], RuntimeException
+ FullyQualifiedErrorId : Unable to unzip package using 7zip. Perhaps try setting $env:chocolateyUseWindowsCompres
sion = 'true' and call install again. Error: 7-Zip encountered a fatal error while extracting the files
I have 7zip installed.
I encounter the same issue.
Running window cmd as administrator may be a solution for some but in my case i had to update my window system environment variable,
I just added this to exiting value on
path: $env:chocolateyUseWindowsCompression = 'true'
and all works just fine.
I had the same error when I was trying to install chocolatey on multiple servers which was finally getting blocked at chocolatey server, which is a chocolatey feature.
https://chocolatey.org/docs/community-packages-disclaimer#rate-limiting
Hence the downloaded file is null and cannot be unzipped. The block is lifted an hour later. After rate limit is lifted, the errors disappears until you trigger it again.
Rate limiting also applies to other packages. When limit is hit while downloading a package other than chocolatey itself, you will get an error code 429.
https://chocolatey.org/docs/troubleshooting#im-getting-a-429-too-many-requests-issue-when-attempting-to-use-the-community-package-repository
First answer: Running window cmd as administrator may be a solution for some but in my case i had to update my window system environment variable, I just added this to exiting value on path: $env:chocolateyUseWindowsCompression = 'true' and all works just fine.
may not work immediately and you still receive "Unable to unzip package using 7zip." error.
Try again after restarting your machine. In my case command works after restarting.
Thx
karam
After a few months, i ran the same command from cmd with Administrative Privilege and it worked. The main point was running
cmd.exe As an Administrator.
I'm unable to install the Alien::XGBoost library using the default installation of Strawberry Perl on Windows 10. I'm using the 64-bit version of Strawberry Perl.
When installing Alien::XGBoost, I receive an error on line 49 in the Alien/Build/CommandSequence.pm file as shown below.
gmake[1]: Leaving directory 'C:/STRAWB~1/cpan/build/Alien-XGBoost-0.04-1/_alien/build_wYwS'
Alien::Build::CommandSequence> + md "C:/STRAWB~1/cpan/build/Alien-XGBoost-0.04-1/blib/lib/auto/share/dist/Alien-XGBoost/dynamic"
Alien::Build::CommandSequence> + md "C:/STRAWB~1/cpan/build/Alien-XGBoost-0.04-1/blib/lib/auto/share/dist/Alien-XGBoost/bin"
Alien::Build::CommandSequence> + copy xgboost.exe C:/STRAWB~1/cpan/build/Alien-XGBoost-0.04-1/blib/lib/auto/share/dist/Alien-XGBoost/bin/
The syntax of the command is incorrect.
external command failed at C:/Strawberry/perl/site/lib/Alien/Build/CommandSequence.pm line 49.
gmake: *** [Makefile:2881: _alien/mm/build] Error 2
PABLROD/Alien-XGBoost-0.04.tar.gz
C:\STRAWB~1\c\bin\gmake.exe -- NOT OK
Stopping: 'install' failed for 'Alien::XGBoost'.
The author of the library just confirmed it was a bug. His statement is below. I installed the previous version and it worked perfectly.
Thanks for reporting this!!
It's a bug! I forgot to quote the path.
As you can see both md commands have the path double quoted (""), but not the copy command.
I'm working to fix it and also I'm going to get travis and appveyor integrations to avoid this in the future.
This weekend this will be fixed. Meanwhile please install the previous version:
cpanm PABLROD/Alien-XGBoost-0.03.tar.gz
I am currently trying - unsuccessfully to install perl PDL as I would like to automate some of my data analysis and graphics generation.
Unfortunately I seem unable to even install the necessary modules without issue, let alone create a small script to deal with my data files.
I have some rudementary experience with Perl but Nothing fancy and am using Windows 10 x64.
Initially I went for the x64 strawberry perl v5.24 installation, followed by ppm installations of Astro::FITS::Header, Convert::UU, OpenGL and PDL - as instructed here http://pdl.perl.org/?page=install. However, there were issues with the installation of Inline::C and after trying the example listed on page 5 of the PDL_Book_Latest http://sourceforge.net/projects/pdl/files/PDL/2.4.10/PDL-Book-20120205.pdf/download there wasn't any image appearing, nor image file in any location I could think to search. Back to Google and still no luck finding any information on the source of this issue so I decided to go back to square one and use an older version in the hopes that it would be more well documented.
So, uninstallation of strawberry perl through Windows installed programs dialog, deletion of strawberry folder and registry entries containing "strawberry". Then a new installation of perl, with the Padre IDE, v5.14 - maybe some debugging fonctionality will help pinpoint the errors. Started installing the same modules (Astro::FITS::Header, Convert::UU, OpenGL, PGPLOT). Astro and Convert worked fine, but the OpenGL started throwing errors about ExtUtils::F77 which I am apparently missing after a few more hours searching. I go to install this module and it keeps giving errors about 'gfortan' being an unknown command... It was my understanding that the idea of PDL was to avoid fortran and C, and I have found next to no information about this installation problem so far.
So i decided to try an alternative approach. I installed the ppm module from cpan and repeated the initial installation process through the ppm command. This time i get:
"Unknown element 'PROVIDE' found inside SOFTPKG. at C:/Dwimperl/perl/site/lib/PPM.pm line 1462."
So my question is as follows:
Am I missing some critical step in the installation process? Is my system just handing this really badly, and if so is there any sort of possible work around? Is the fact that I tried two different versions liable to create path issues that could be at the root of this problem?
Could anyone provide an alternative and preferably not too complex route to install PDL with a given perl installation on Windows 10?
EDIT 1:
Here is the code for the error I got trying to install Inline::C, an apparent pre-requisite for PDL
code deleted to make space for updates...
EDIT 3:
I reinstalled GnuWin32 in the directory specified by PATH, rather that changing PATH, and the tried the installation again. Inline::C gave the same 'diff' and 'rm' errors. So i ran "cpanm --notest 'package'" to install Inline::C and then PDL, both said they were successful. However, even using '--notest' cpanm could not install OpenGL and PGPLOT.
The final objectif is to be able to produce graphics using the fonctions from PGPLOT: for example
# use PDL;
# use PDL::Graphics::PGPLOT;
# imag(sin(rvals(200,200)+1));
yet this doesn't work of course if PGPLOT can't install.
EDIT 4:
Tried the fix found by #Dr.Avalange at sourceforge https://sourceforge.net/p/pogl/bugs/26/ and noticed that I seem to have multiple copies of this file.
Here
Is this normal...?
EDIT 5:
So i uninstalled perl, deleted any lingering files I could find in %APPDATA%, %USERPROFILE% and C:/DWIM, and then ran ccleaner just in case I missed anything.
I then downloaded Strawberry perl 5.24.1 x64 for Windows and installed it.
After this, I ran 'cpanm Astro::FITS::Header', cpanm 'Convert-UU' and 'cpanm OpenGL' as per http://pdl.perl.org/?page=install. This all worked fine. Then I ran 'cpanm PDL' which installed Inline, Pegex, Win32::Mutex and Module::Compile dependencies. However, if had the same error with Inline::C that you mentioned previously.
I already had GetGnuWin32 installed before so not sure why this isn't working. The Windows 'Path' environment (not PATH - this doesn't exist according to the advaced system dialogue) is noted as
%USERPROFILE%\AppData\Local\Microsoft\WindowsApps;
In this directory I have the folder GetGnuWin32 which should have installed all the packages from the link you provided, unless there is a supplementary step that I missed to install this correctly? So I redownloaded the DiffUtils setup and ran that, installing to \programfiles(x86) (default option). I then reran 'cpanm PDL'.
I still get the same 'diff' error message. So is DiffUtils, not installing properly? (I did close and re-open the commandline between tries and after the installation)
EDIT 6:
So after installing PDL and PGPLOT with --notest I tried to run the following test and it failed. See below
C:\Windows\system32>perldl
perlDL shell v1.357
PDL comes with ABSOLUTELY NO WARRANTY. For details, see the file
'COPYING' in the PDL distribution. This is free software and you
are welcome to redistribute it under certain conditions, see
the same file for details.
ReadLines, NiceSlice, MultiLines enabled
Reading PDL/default.pdl...
Found docs database C:/Strawberry/perl/site/lib/PDL/pdldoc.db
Type 'help' for online help
Type 'demo' for online demos
Loaded PDL v2.017 (supports bad values)
Note: AutoLoader not enabled ('use PDL::AutoLoader' recommended)
pdl> use PDL::Graphics//PLplot
Unknown regexp modifier "/P" at (eval 62) line 4, at end of line
Unknown regexp modifier "/L" at (eval 62) line 4, at end of line
Unknown regexp modifier "/t" at (eval 62) line 4, at end of line
BEGIN not safe after errors--compilation aborted at (eval 62) line 5, <DATA> line 207.
pdl> use PDL::Graphics::PLplot
Can't locate PDL/Graphics/PLplot.pm in #INC (you may need to install the PDL::Graphics::PLplot module) (#INC contains: C:/Strawberry/perl/site/lib/MSWin32-x64-multi-thread C:/Strawberry/perl/site/lib C:/Strawberry/perl/vendor/lib C:/Strawberry/perl/lib .) at (eval 72) line 5.
BEGIN failed--compilation aborted
pdl> use PDL
pdl> use lib 'C:/Strawberry/perl/site/lib/PDL/Graphics'
pdl> use PGPLOT
pdl> use PDL::Graphics::PGPLOT
pdl> imag(sin(rvals(200,200)+1))
Undefined subroutine &PDL::Graphics::PGPLOT::pgqinf called at C:/Strawberry/perl/site/lib/PDL/Graphics/PGPLOT.pm line 408, <DATA> line 90.
pdl> exit
C:\Windows\system32>cpanm PDL::Graphics::PGPLOT::pgqinf
! Finding PDL::Graphics::PGPLOT::pgqinf on cpanmetadb failed.
! Finding PDL::Graphics::PGPLOT::pgqinf () on mirror http://www.cpan.org failed.
! Couldn't find module or a distribution PDL::Graphics::PGPLOT::pgqinf
C:\Windows\system32>cpan PDL::Graphics::PGPLOT::pgqinf
Loading internal null logger. Install Log::Log4perl for logging messages
CPAN: CPAN::SQLite loaded ok (v0.211)
Database was generated on Thu, 13 Apr 2017 13:49:14 GMT
C:\Windows\system32>
There was already a directory problem but I managed to point it in th right direction I had thought. Also tried installing the PLplot 'cpanm' said the installation was successful but there is no .pm file, only a .pd in another directory and so the use PDL::Graphics::PLplot fails as there is no .pm file to find.
EDIT: 7
So retrying ppm install http://www.sisyphusion.tk/ppm/PGPLOT.ppd seemed to work this time as the links int he explanation you provided are no longer in use
http://www.kalinabears.com.au/w32perl/pgplot-5.2.2-mingw32.tar.bz2
http://jrfonseca.home.dyndns.org/projects/gnu-win32/software/ported/patches/pgplot-5.2.2-mingw32.diff.gz
And while this seemed to work, there are no traces of the files that were listed as necessary for the installation, unless they were just for this specific method?
pgplot/bin/cpgplot.dll
pgplot/bin/pgplot.dll
pgplot/bin/grfont.dat
pgplot/include/cpgplot.h
pgplot/lib/cpgplot.a
pgplot/lib/pgplot.a
finally, trying the example again gives the following; no errors, but no image either...
Microsoft Windows [version 10.0.14393]
(c) 2016 Microsoft Corporation. Tous droits réservés.
C:\Windows\system32>perldl
perlDL shell v1.357
PDL comes with ABSOLUTELY NO WARRANTY. For details, see the file
'COPYING' in the PDL distribution. This is free software and you
are welcome to redistribute it under certain conditions, see
the same file for details.
ReadLines, NiceSlice, MultiLines enabled
Reading PDL/default.pdl...
Found docs database C:/Strawberry/perl/site/lib/PDL/pdldoc.db
Type 'help' for online help
Type 'demo' for online demos
Loaded PDL v2.017 (supports bad values)
Note: AutoLoader not enabled ('use PDL::AutoLoader' recommended)
pdl> use PDL
pdl> use PDL::Graphics::PGPLOT
pdl> imag(rvals(200,200)+1)
%PGPLOT, Unable to read font file: grfont.dat
%PGPLOT, Use environment variable PGPLOT_FONT to specify the location of the PGPLOT grfont.dat file.
Displaying 200 x 200 image from 1 to 142.421356201172, using 240 colors (16-255)...
pdl> $ENV{PGPLOT_FONT} = "C:/Strawberry/perl/site/lib/PGPLOT/pgplot_supp"
pdl> imag(rvals(200,200)+1)
Displaying 200 x 200 image from 1 to 142.421356201172, using 240 colors (16-255)...
pdl>
After translating from French I can see that you don't have diff in your system. Either install diff (part of gnu32: http://gnuwin32.sourceforge.net/) or just skip the tests. See also:
https://github.com/ingydotnet/inline-c-pm/issues/60
With Strawberry 5.24.1 simply type the following from the command prompt:
cpanm --notest PDL
or if you want to watch everything that's going on:
cpanm -v --notest PDL
This will take some time to run.
I am trying to install Microsoft HDInsight Emulator for Windows Azure using the Web Platform Installer 5.0. The installation fails while installing Hortonworks Data Platform. The following are the part of logs after installation:
CAQuietExec: Checking JAVA_HOME is set correctly...
CAQuietExec: 'C:\Azul\zulu1.7.0_65-7.6.0.1-win64\bin\java -version 2>&1 | findstr /i "version"' is not recognized as an internal or external command,
CAQuietExec: operable program or batch file.
CAQuietExec: "1.6.0_31" was unexpected at this time.
CAQuietExec: Error 0x800700ff: Command line returned an error.
CAQuietExec: Error 0x800700ff: CAQuietExec Failed
CustomAction CheckPreReq returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
I have checked that JAVA_HOME is set in environment variables to C:\Azul\zulu1.7.0_65-7.6.0.1-win64. When I run the command 'C:\Azul\zulu1.7.0_65-7.6.0.1-win64\bin\java -version 2>&1 | findstr /i "version"' in command prompt, It returns the result with the version 1.7.0_65.
I don't understand why in the log this command is not recognized while I am able to execute it and from where 1.6.0_31 version came in log?
Could you please help me to resolve this problem?
Thanks in advance.
I found the cause of the failure. It was that command was wrapped in single quotes by installer and command prompt was not recognising it. After replacing single quotes with double quotes I am not getting this error.
I was able to build the most recent version of QScintilla (2.9.1) on Ubuntu 15.10. I have tried building the same version on Windows 10 using Qt 5.6. QMake run to completion without giving errors. A call to Make gives the following error message:
make -f Makefile.Release
make[1]: Entering directory 'G:/Sources/QScintilla/QScintilla_gpl-2.9.2/Qt4Qt5'
Makefile.Release:822: *** missing separator. Stop.
make[1]: Leaving directory 'G:/Sources/QScintilla/QScintilla_gpl-2.9.2/Qt4Qt5'
makefile:34: recipe for target 'release' failed
make: *** [release] Error 2
What am I doing wrong? How can I solve it?
I ran into similar issues. I eventually got a working 'QScintilla' on my Windows 10 machine as described below.
My PC has the following specifications:
Windows 10, 64-bit OS
Anaconda package installed (Python 3.5)
PyQt5 installed (download the .exe installer from https://www.riverbankcomputing.com/software/pyqt/download5)
STEP 1:
Download the file QScintilla-2.9.2-cp35-none-win_amd64.whl from the site https://pypi.python.org/pypi/QScintilla .
Put the file in the folder:
C: \ .. \ Anaconda \ Scripts \
We will use this .whl file to do the installation of QScintilla.
_
STEP 2:
Open the Windows cmd tool with Administrator privileges! Now type the following command:
> cd "C:\..\Anaconda\Scripts"
This brings the cmd shell to the right spot. Now type the following command:
> pip3 install QScintilla
If all goes well, you get the following message:
> pip3 install QScintilla
Collecting QScintilla
Downloading QScintilla-2.9.2-cp35-none-win_amd64.whl (1.6MB)
100% |################################| 1.6MB 984kB/s
Collecting PyQt5 (from QScintilla)
Downloading PyQt5-5.6-cp35-none-win_amd64.whl (74.7MB)
100% |################################| 74.7MB 23kB/s
Collecting sip (from PyQt5->QScintilla)
Downloading sip-4.18-cp35-none-win_amd64.whl (46kB)
100% |################################| 51kB 5.7MB/s
Installing collected packages: sip, PyQt5, QScintilla
..
Successfully installed PyQt5-5.6 QScintilla-2.9.2 sip-4.18
_
STEP 3:
I did not get the message "Successfully installed" from the first shot. Instead I got the following error message:
PermissionError: [Errno 13] Permission denied: 'C:\..\anaconda\Lib\site-packages\sip.pyd'
Apparently the file sip.pyd sitting in the directory C:\..\anaconda\Lib\site-packages could not be accessed. So I opened another Windows command shell (of course again with Administrator privileges!) and typed the following command:
> icacls "C:\..\Anaconda\Lib\site-packages" /grant "Administrators":(OI)(CI)F /T
This command will give full access rights (read - modify and write) to all "Administrator" users for all the files in the site-packages folder, and all the files in its subfolders. While this command executes, you should get the following messages:
...
processed file: C:\..\Anaconda\Lib\site-packages\__pycache__\readline.cpython-35.pyc
processed file: C:\..\Anaconda\Lib\site-packages\__pycache__\simplegeneric.cpython-35.pyc
processed file: C:\..\Anaconda\Lib\site-packages\__pycache__\six.cpython-35.pyc
processed file: C:\..\Anaconda\Lib\site-packages\__pycache__\test_path.cpython-35.pyc
processed file: C:\..\Anaconda\Lib\site-packages\__pycache__\test_pycosat.cpython-35.pyc
...
Successfully processed 38589 files; Failed processing 0 files
Now you can repeat STEP 2, and it should work!