I have a CDH 5.1 cluster with 3 nodes. We installed it using cloudera manager automated installation.
It was running perfect until we moved the box to a different network and IP addresses changed. I tried following steps
1. Stopped service, cloudera-scm-server.
2. Stopped service, cloudera-scm-agent
3. Edit the /etc/cloudera-scm-agent/config.ini
4. change the server host to the new ip.
5. restart service, cloudera-scm-agent, cloudera-scm-server.
not working .
Then i followed
http://www.cloudera.com/content/cloudera/en/documentation/cloudera-manager/v4-latest/Cloudera-Manager-Administration-Guide/cmag_change_hostnames.html
Not helped even after changing the ips in the PostgreSQL directly.
I found following blog :
http://www.geovanie.me/changing-ip-of-node-in-cdh-cluster/
Getting following error in the scm-agent log file
ProtocolError: <ProtocolError for 127.0.0.1/RPC2: 401 Unauthorized>
Not working ....
Can anyone please help how to change all IP addresses in a cdh 5.1 cluster safely .....
Thanks,
Amit
This is causing because of precious cloudera-scm-agent service wasn't stopped correctly, please try,
$> ps -ef | grep supervisord
$> kill -9 <processID>
then restart the agent again.
$>service cloudera-scm-agent start
Related
I follow the first steps to install Flink.
I can start the cluster without any problem
$ start-cluster.sh
Starting cluster.
Starting standalonesession daemon on host DESKTOP-....
Starting taskexecutor daemon on host DESKTOP-....
But I don't get any status from
$ ps aux | grep flink
I can also not access the dashboard via localhost:8081.
There is an older post having these issues, but the solution didn't work for me, since the described conf files do no longer exist, apparently.
My JAVA_HOME is set as C:\Progra~1\Java\jdk1.8.0_311 to avoid issues with the space in Program Files.
Can you check the logs in the /logs folder? I'm suspecting that C:\Program Files\ could still cause issues because of the space there.
go to download Flink folder and try bash command
$./bin/start-cluster.sh --daemon bootstrap-server localhost:8081
and run code one more
$ ./bin/flink run examples/streaming/WordCount.jar
if you finished run above code which not issue, go to localhost:8081
This still seems to be problematic. I tried to run from Windows Subsystem for Linux (WSL).
I have the following versions: java 11.0.16 and flink 1.15.2.
sudo apt-get update
sudo apt install openjdk-11-jre-headless
export FLINK_HOME=/mnt/c/Projects/Apache/flink-1.15.2
I set the following in flink-conf.yaml
rest.port: 8081
rest.address: localhost
rest.bind-adress: 0.0.0.0
Whereby I changed the bind address for localhost to 0.0.0.0 this seems to have fixed the problem.
$FLINK_HOME/bin/start-cluster.sh
Now I can access the Flink Web Dashboard.
I'm a student working on a test cluster, consisting of around 25 hosts. We installed using Ambari and have FreeIpa running on a host as a dns and ldap server. The rest are typical Hadoop
infrastructure. Hive was failing and I wondered whether the db connection parameters used during the Ambari installation were incorrect and I tried to find a way to re-run the db connection process. I didn't get anywhere and it was late so I left it, ambari interface working.
Next morning, ambari webUI seems to be down. I thought that maybe the webserver needed restarted so I tried the following:
[akidd#dw ~]$ sudo ambari-server start
Using python /usr/bin/python
Starting ambari-server
ERROR: Exiting with exit code 1.
REASON: Unable to detect a system user for Ambari Server.
- If this is a new setup, then run the "ambari-server setup" command to create the user
- If this is an upgrade of an existing setup, run the "ambari-server upgrade" command.
Refer to the Ambari documentation for more information on setup and upgrade.
Can anyone help me to understand what could have happened?
If I run ambari-server setup will the existing cluster be ok assuming I create everything like for like with how it was originally?
Thanks for your help!
#user3535074 You should try to start it with the user that installed it.
If you do run ambari-server setup as current user, remember to choose No the following options:
Customize user account for ambari-server daemon [y/n] (n)? n
Do you want to change Oracle JDK [y/n] (n)? n
Enter advanced database configuration [y/n] (n)? n
More info on the following post, including how to backup ambari database before running setup again:
https://community.cloudera.com/t5/Support-Questions/Ambari-server-failed-to-start-after-system-reboot-Below-is/td-p/203806
I installed Hadoop 2.6.4 on my AWS - 4 instance; 1 namenode; 1 secnamenode; 2 slaves. After the installation is completed, I tried seeing the namenode on Web UI using URL ec2-52-90-242-76.compute-1.amazonaws.com:50070 I am getting timed out.. anybody help??
If you are accessing from your system, you need to update your hosts files with IP address along with hostname or you can open directly with IP_address:50070
As well as check below
Check Firewall is on or off (Recommended is off)
Check Iptables service status (Recommended is stop)
Check SELINUX (Recommended is disables)
Trying again & again with all required steps completed but cluster Installation when install selected Parcels, always shows every host with bad health. setup never completed at full.
i am installing cm 5.5 on CentOS 6.7 using virtualbox.
The Error
Host is in bad health cm.feuni.edu
Host is in bad health dn1.feuni.edu
Host is in bad health dn2.feuni.edu
Host is in bad health nn1.feuni.edu
Host is in bad health nn2.feuni.edu
Host is in bad health rm.feuni.edu
above error are shown on step 6 where setup says
The selected parcels are being downloaded and installed on all the hosts in the cluster
in previous step 5 all hosts were completed with heartbeat checks in the end
memory distributions
cm 8GB
all others with 1GB
i could not find proper answer anywhere else. What reason could be for the bad health?
I don't know if it will help you...
For me, after a few days I struggled with it,
I found the log files (at )
It had a comment there is a mismatch of the guid,
so I uninstalled everything from both machines (using the script they give,/usr/share/cmf/uninstall-cloudera-manager.sh , yum remove 'cloudera-manager-*' and deletion of every directory related to cloudera I found...)
and then removed the guid file:
rm /var/lib/cloudera-scm-agent/cm_guid
Afterwards I re-installed everything, and that fixed that issue for me...
I read online that there can be issues with the hostname and things like that, but I guess that if you get to this part of the installation, you already fixed all the domain/FDQN/hosname/hosts issues.
It saddens me there is no real manual/FAQ for this product.. :(
Good luck!
I faced the same problem. This is my solution:
First I edited config.ini
$ nano /etc/cloudera-scm-agent/config.ini
so that the hostname where the same as the command $ hostname returned.
then I restarted the agent and the server of cloudera:
$ service cloudera-scm-agent restart
$ service cloudera-scm-server restart
then in cloudera manager I deleted the cluster and added again. The wizard continued to run normally.
I have been following this tutorial to try and setup a single node mesosphere cluster from their
official tutorial:
http://mesosphere.com/docs/getting-started/developer/single-node-install/
I followed all the commands without any issues, and I also added the ports 5050 and 8080 to my security group. When I try to access the console for mesos/marathon, I get a "Internet Explorer cannot display the webpage" message.
They also recommend checking it the following way:
MASTER=$(mesos-resolve `cat /etc/mesos/zk`)
mesos-execute --master=$MASTER --name="cluster-test" --command="sleep 5"
But that comes up with an error:
WARNING: Logging before InitGoogleLogging() is written to STDERR
F0106 17:03:08.126703 20993 process.cpp:1561] Failed to initialize, gethostbyname2: Unknown host
*** Check failure stack trace: ***
I am not really sure how to troubleshoot this either, and there are not many tutorials I could find on how to install mesos on ubuntu.
I checked the contents of the zk file, seems to be the default value.
$ cat /etc/mesos/zk
zk://localhost:2181/mesos
I would really appreciate any clues on how to go about this one.
Edit: The process is definitely running too - just an fyi:
root 31545 8.5 5.9 187464 35604 ? Ssl 17:28 0:00 /usr/local/sbin/mesos-slave --master=zk://localhost:2181/mesos --log_dir=/var/log/mesos
root 31563 28.5 2.1 116304 12856 ? Rs 17:28 0:00 /usr/local/sbin/mesos-master --zk=zk://localhost:2181/mesos --port=5050 --log_dir=/var/log/mesos --quorum=1 --wo
Mesos uses gethostbyname2 to resolve hostnames to IPs. The first thing I would recommend, is to try "ping localhost" and "ping hostname", and verify that there are no strange settings in /etc/hosts. If you're doing a multi-node cluster, I'd recommend that hostname map to the public IP address (not 127.0.x.1).
If that doesn't help, you can try setting the --ip and --hostname flags when starting mesos-master and mesos-slave, to bypass the gethostbyname2 resolution. These can also be set by writing to the file-based parameters, e.g. /etc/mesos/mesos-master/ip
For additional troubleshooting, try running wget http://localhost:5050 (or curl -L) from the mesos master, to verify that it is locally visible. Also try wget http://<public_ip>:5050 to verify that the web server is up and serving to the public IP. Depending on how your (EC2?) node is setup, you may need to expose/forward the port, or connect to a VPN.
Thanks Adam. I ran the wget and curl commands, and nothing was actually listening on port 8080 or 5050. I did open those ports in the ec2. A simple reboot did the trick however, once I ssh'ed into the ec2 instance after the reboot, both mesos and marathon were running and both ports are now showing after I ran
netstat -ntln.