when i run from windows-7 with cygwin to connect CFEngine bersion 3.4.2
cf-agent -Bs 217.64.173.210
Challenge response from server 217.64.173.210/217.64.173.210 was incorrect!
I: Made in version 'not specified' of '/var/cfengine/inputs/update.cf' near line 47
!! Authentication dialogue with 217.64.173.210 failed
Challenge response from server 217.64.173.210/217.64.173.210 was incorrect!
I: Made in version 'not specified' of '/var/cfengine/inputs/update.cf' near line
and in /var/cfengine/inputs/update.cf on line 47 is
47 : perms => m("600"),
on cgwin in folder keys
/var/cfengine/ppkeys
localhost.pub
localhost.priv
root-MD5=b8825ba0a0e7017e34b15766d3b3ac58 (which is also at CFEngine Server Side shared ky)
on Cf-Engine Server Side
/var/cfengine/ppkeys/
localhost.priv
localhost.pub
root-MD5=b8825ba0a0e7017e34b15766d3b3ac58
With Regards
Sandeep
Did you also get the server to trust the client's key? like so:
cf-key -t root-MD5=b8825ba0a0e7017e34b15766d3b3ac58
(on the server)
Also, try restarting cf-serverd in verbose mode with the -v switch on the server, and watch what error messages you get on that end.
Related
The situation is, I wanna establish a QUIC connection based on quic-go from local to ECS server. The related tests using localhost are done both on local and remote device. That is:
#local: .$QUIC-GO-PATH/example/client/main -insecure -keylog ssl.log -qlog trial.log -v https://127.0.0.1:6121/demo/tile
#local: .$QUIC-GO-PATH/example/main -qlog -tcp -v
These tests are completed.
Now is the problem,when I start local-remote connection an error occurred:
#remote: .$QUIC-GO-PATH/example/main -qlog -tcp -v
#local: .$QUIC-GO-PATH/example/client/main -insecure -keylog ssl.log -qlog trial.log -v https://$REMOTE_IPADDR:6121/demo/tile
timeout: no recent network activity
When I go through a wireshark examination, it seems like the CRYPTO handshake never finishes:
Wireshark
Also client Qlog file atteched here:
Qlog file
Codes are all the same with https://github.com/lucas-clemente/quic-go
Help!
This problem has been solved.
Code $QUIC-GO-PATH/example/main.go has binded the port as a default onto 127.0.0.1:6121, which led to the problem that the server cannot get reached by client outside, just get this on server running:
-bind 0.0.0.0:6121
I have:
-Windows 10
-ruby 1.9.3p551 (2014-11-13) [i386-mingw32]
-git version 2.6.4.windows.1
When I type in: rhc setup and then i try to log in i get this:
use the server for OpenShift Online: openshift.redhat.com.
Enter the server hostname: |openshift.redhat.com| here is my login
You can add more servers later using 'rhc server'.
RSA 1024 bit CA certificates are loaded due to old openssl compatibility
An unexpected error occurred: invalid character at "<!DOCTYPE "
I need little help here :)
At this step "Enter the server hostname: |openshift.redhat.com|", just hit enter, don't type anything there. If you type something else there it's going to try to connect to that and it won't work.
The following error is occurred in the exchange server 2007 and mail are not disseminating to all recipients.
I tried with get-queue | fl commands and also followed some of the online suggestions made for other users. But nothing worked out to fix my issue.
Can some one help me out to fix this issue with my mail server?
I got this error:
NextHopDomain : hub version 15
LastError : 451 4.4.0 Primary target IP address responded with: "235 00000870YIIGUAYJKoZIhvcSAQICAQBuggY/MIIGO6ADAgEFoQMCAQ6iBwMFAAAAAACjggTEYYIE
wDCCBLygAwIBBaEPGw1JTkNPSVMuR09WLklOoigwJqADAgECoR8wHRsHU01UUFNWQxsSTUFJTC5pbmNvaXMuZ292Lmluo4IEeDCCBHSgAwIBEqEDAgFMooIEZgSCBGIjDRqya
dXg4Y1GQAcMZKo9KfI/2l1JPauKHPjVxyi3sP+6PV8wXjzRn36QjnIsLu7OPtzWDRkJBR/VFnJMLT3wTpg0uEe4eAr7kAgJ+mo4vbuFdlYb+ns23tnLO2kyt3dfXgrPF5Ulm4
C6me734JrfOrkT51UCliUMKmlcDAhcPEmDUagjCg9XmLatKNTn41sFZktRjFs8bXexAacl/Wil+gFI5qZbh9nrs922FUoLhmX1U7dS6xiyH2VHaxCAodcbNh14apN/rK0SvjQ
Zi+L2bO2RSF3Rx5LO4zAPfn9LAlNQRwQo8U8NR7J1JACBUwe3t3InTRA0TXyJNCxVGZBM5QjgeJFgBRN6pqa6jZyT7tUgURrG1fHFs4fV77jyxgKjxcrUdc5n7MWT77sfLlb4
Ao5HJukOnWlBVUyoDCDvVarc+8/5VJdWFxnNUkohaVUPnDYMMGiGsadDYy39omsSasFkLShLqE7vBGx3WdsvQQnH2kOTwS4mfbWsuulDUfgHOoBg4AW/fB1oxCUT5E3/siLDd
urZX/LEjSCmwxbtzzLJ9IGhAlMb+WUUhlZiNb2mn3pZAUlQnDip0ZkXi2nYm71FaTnBb1chScpnpBJ+o30C6yPubBnP562F33sgd/CqB9ZbH4nawrG4pPa6yoVDFgB9lVnQ0h
EGlcyNotCTdFMuJrqVF/XFwGKPT+V9uxdNtMNqDkXjLNGE7FshmmhAMbPPVtGdpJaPyAx5RKf1IqZRs2aHwU294AdChan+SsxZkruzB3ahiyIlops5j3Ie64lPJOnQdAmT9LU
WBG4ssEToAILaVfNvgfPx60dh1noK8Ih0plJ0+r7dV7SctqijbRtgyDccKYqrM5z+UjdbTJjzEwq54dljmq2MyEC7lghBcUkzNA0v1gKztXiIDa+vED9Z0u34n5bUghzZCSpF
41BjMt82S6IKzFfZxVZgW68I3kCvslzRFHmnn0V3ICQBkwrwUoz73l9xnWUqvSyg8khALOMcuyXfrDT3H5Mb/Ar62e6VnOb2RAh7Mc28I3JsbZ6oucv80Xpe9uHTkvNcitUUD
4lFKyHPv65t6/19lju4clUXC+fbP94uL1I9g8nQlCBWSmQt+QZeCZ5xcBoCh0qb1CexWVihixZPRxcp7Ut+JCt1RCL1IYNJqA7k33xTT7KyXgV8f0BYuck5PdeDMFYVB77dju
kAlWDpRd2PYOTosswHnF6d1rTQihawC+BOBx2U03jROO57K/xnto/shWxuz4j8kBQHuX+RJfZvOZLtO5AsgmM/34iTe6fitAQ5MVi5R1X7BioxUik9OgXUjRa/ilFvm9JfAe/
TxYclvNckP3ZtnsLyM3vynitaKIzUPhDotnvfJhZb1hVL69KYl77Bh/b6/wKF8vzoytXHgUkwgaBfvGvugD4oyH0yhzRWaazi905+OkbqwH2pb+/JY11PSQgRxaVYMvvgfcfg
sDvfjS0CA44oj/Nz0//fAhYYBW6kggFcMIIBWKADAgESooIBTwSCAUsxZR1eKvSuYI6zhYpUMZJQ5cyo/GmW7Zrq9qcFO3pZjdOI9/gGKp9H5pYsmOcEx6zzCfRw1yBsVz7Mh
BmAITrQ7FslxYzQS/O6TTaJsT2TPL3dfwyOaqM7xv4xtht3GN9vr6KceDhfU7jBC6osgSioL5/HOzTuwpZW7eUg+22PDdLx/1XbTlBcYL9ZVJ73ELgbv/EadMCWwe1VCowKJx
YZjaZTTiIhPa68Nogxu7QnaXGE7CLUD8LeJuoh3fL1VGMfD+5X/azU8Bla2pqMT1OvUfhuDUK9s/3++tzFUNIVuzYlP+IxVFFM6kSrxlV1Raoywasu0PIczzjQ4hRV3xJ1NEI
yCuiXSN4oxJP3kq6a/TzFsxURdBbKK5YuNIRmb3t/mTpgihoGXKJPoDwEPpbB55IUBhhDG9t3y7sPEcpo48M4JVAJxslG5GM+0000002CPuzRqM2PPoahT81xmujDkYbkp2uE
O19dIzolNFXEmmU=." Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery f
ailed to all alternate hosts.
NextHopDomain : Submission
LastError :
I just had this issue and the problem was the time between the 2 hub transport servers was greater then 5mins. I synced the time and retried the queue and the mail flowed again.
I'm having trouble starting a proxy server for jmeter 2.10 and 2.11. I found a couple links here on SO and apache.org but my error message is slightly different that what's written on these links. Per the wiki from apache.org, I don't think I have trouble finding keytool because it returns the path when I do a
which keytool
/usr/bin/keytool
and I don't have trouble creating a file in the jmeter-210 and jmeter-211/bin dirs. This is the error message I get in my jmeter.log file:
ERROR - jmeter.protocol.http.proxy.ProxyControl: Could not initialise key store java.io.IOException: Command :'"keytool" "-genkeypair" "-alias" ":root_ca:" "-dname" "CN=_ DO NOT INSTALL unless this is your certificate (JMeter root CA), OU=Username: COMPANY\user.name, C=US" "-keyalg" "RSA" "-keystore" "proxyserver.jks" "-storepass" "randomstr1" "-keypass" "randomstr1" "-validity" "7" "-ext" "bc:c"' failed, code: 1
keytool error: java.io.IOException: Invalid escaped character in AVA: 's'
I don't know what this "invalid escaped char in AVA" is. My company and username don't have the string "AVA" and I didn't find it in any of the property files in jmeter-21x/bin.
Not sure if this is affecting it but I'm running jmeter from Darwin on a MBP, OSX 10.7.5.
JMeter 2.9 doesn't give me any proxy issues, although, I ran into other issues with it, which is why I tried using these 2 newer versions, which are giving me problems with the proxy server. I'll try going down to 2.8 to see what happens but I'd rather not if I can help it. That and I'm super curious what the issue is with 2.1x and my laptop. Thanks in advance for your help.
EDIT: The COMPANY/user.name part of the error message was changed this way to sanitize the error message, although, I will try at home on my linux box to see if the funny username representation is the cause.
As per sebb response on User Mailing List:
"I suspect it might be in the string "COMPANY\user.name" which is
derived from the Java system property "user.name".
You could try redefining it on the command line (or in
system.properties) to something simpler, for example:
-Duser.name=foobar
A bug has been opened to fix this issue with "\" character:
https://issues.apache.org/bugzilla/show_bug.cgi?id=56178
I downloaded gsoap 2.8 and went into the samples folder and ran a make. Everything seems to have built fine. I then navigated into the "ssl" folder and ran the sllserver in one xterm and ran sslclient in a second xterm window. (I am running RHEL 6) The server seems to run fine, it says "Bind successful: socket = 4". But when I run the client I receive the following message:
Error -1 fault: SOAP-ENV:Client [no subcode]
"End of file or no input: Operation interrupted or timed out (30 s receive delay) (30 s send delay)"
Detail: [no detail]
I have not modified any of the sample code, so it seems like it should just work. Can anyone please give me some advice as to what I should look at? I am trying to learn how to set up a soap server that uses ssl. (I have a gsoap server running already) I searched all day for an example on the web and as usual, there is not one.
Thank you so much for any help.
You could rebuild this example with compiler switch -DDEBUG to enable message logging (make 'sslclient_CFLAGS = -DWITH_OPENSSL -DWITH_GZIP -DDEBUG'). The TEST.log will tell what went wrong. I suspect it is a network issue with the server address/port that is set by default to "https://localhost:18081".
You could set the timeout parameter: soap.recv_timeout = 60 (for 60 seconds)