I am new to JMeter and trying to record a JMeter script on firefox but getting an error message
Did Not Connect: Potential Security Issue
First make sure you have followed all the steps below and especially the browser side configuration:
https://jmeter.apache.org/usermanual/jmeter_proxy_step_by_step.html
If your site is HTTPS, I would suggest you to use Blazemeter Plugin for Chrome to record your tests without much hassles and then export it later into Jmeter.
1.Try to add the link to trusted sites.
-In Firefox go to the Open Menu (Upper right 3 lines)
-Locate and select the “Security” tab.
-Click on the “Exceptions…” button.
Next type in the internet address you would like to remain trusted EX:
*.test.com
-Click “Close” then “OK” to complete this action.
Try recording with chrome.
When making an auth request to the Google API (gapi), it's returning false on the checkOrigin.
I have removed any client id's or anything that would link directly to my account and replaced it with a regex indicating what the data is for reference.
Url: https://accounts.google.com/o/oauth2/iframerpc?action=checkOrigin&origin=https%3A%2F%2Flocal.tools&client_id=(\d{21})
My origin url is a local url, which is https://local.tools
Result: {valid: false}
I'm using the example found here without deviation (except for replacing clientid with my 21 digit clientid): https://ga-dev-tools.appspot.com/embed-api/third-party-visualizations/
The items I'm trying to display show up nicely on the demo site, but aren't getting past the Not valid origin for the client error on my local.tools site.
Clear your browser cache. Started getting this error in Chrome and then I created a new client id and was still getting the issue. Opened firefox and it worked, so I cleared the cache on Chrome and it started working.
I received the same console error message when working with this example: https://developers.google.com/analytics/devguides/reporting/embed/v1/getting-started
The documentation says not to overlook two critical steps ("As you go through the instructions, it's important that you not overlook these two critical steps:
Enable the Analytics API [&] Set the correct origins"), but does not clearly state WHERE to set the correct origins.
Since the client ID I had was not working, I created a new project and a new client ID. The new project may not have been necessary, but I'm retaining (and using) it.
Here's what worked:
Create a new project
Add and Enable the Analytics API
Create a new credential - ensure that it is an OAUTH credential (scroll to the bottom of this page for instructions https://developers.google.com/api-client-library/javascript/start/start-js#Setup).
During creation of the credentials, you will see a section called "Restrictions
Enter JavaScript origins, redirect URIs, or both". This is where you can enter your origins.
Save and copy your client ID (and secret).
My script worked after I created the new OAUTH credential, assigned the origin, and used the newly generated client ID following this process.
try clear caches and then hard reload, i had same error but when i tried to run on incognito browser in chrome it worked.
Key Point: Add both http://localhost and http://localhost:port_number to the Authorized JavaScript origins box for local tests or development.
Credentials do not work if API is not enabled. In my case the next steps were needed:
Go to https://console.developers.google.com/apis/library
Enter 'People'
From the result choose 'Google People API'
Click 'Enable'
Creating new oauth credentials worked for me
You probably use Client ID like this: <CLIENT_ID>.apps.google.com
Make sure your client ID is without ".apps.google.com"
For me - I just went here:
https://console.developers.google.com/apis/credentials
Then chose the right project; then choose the credential with the same ID shown in your console error message. When editing the credentials you can add multiple origins to the white list.
After updated Authorized JavaScript origins browser still caching old data, so I need to Empty cache and hard reload then it works
1. Change Authorized origins
2. Open Dev Tool (F12) then right-click into reload button
Clearing the cache on chrome works!
Please find the steps below to clear the cache.
Open dev tools (Right-click on the page and select inspect/ press F12)
Right-click on the chrome reload button while the dev tool is opened. (You will find the option to clear the cache and reload the site)
clearing the cache works for me.
for React developers try to restart the project otherwise it will show the same error again and again.
It was a referrer-policy problem.
This has been such a pain for a long time to me too...
Found the issue, my website instance had a referrer policy set to
no-referrer. After setting it to no-referrer-when-downgrade, the One
Tap prompt showed up as expected.
https://stackoverflow.com/a/63039142/15565029
If you are using Django, SECURE_REFERRER_POLICY is 'same-origin' by default. Change it by adding the below code in your settings file.
# settings.py
SECURE_REFERRER_POLICY = 'no-referrer-when-downgrade'
https://docs.djangoproject.com/en/3.2/ref/settings/#std:setting-SECURE_REFERRER_POLICY
Similar to few answers at above but with screenshots. If you created project for Firebase, may also use the same steps to configure at Google Cloud Platform console.
Select the project at https://console.cloud.google.com/
Navigate to Credentials
Click Edit button for the related OAuth 2.0 Client ID
Add URI into Authorized JavaScript origins
Don't forget to Save
That worked for me after trying for an hour:
On https://console.cloud.google.com/apis/credentials :
Edit Client Outh (mine was: Web Client (Auto Created by Google Service), which was created by my Firebase Web Project)
Enter JavaScript Origin for the Client ID (mine was: localhost:NNNN)
and don't forget to Save.
Try google login for half an hour: didn't work
Enabled Google Analytics as suggested above
Empty Chrome cache and hard reload as suggested above
Try google login for half an hour: didn't work
Sign Out from https://console.cloud.google.com, and sign in again
Empty Chrome cache and hard reload
Now it worked
I don't know which one of the above fixed the problem.
May be it was just a matter of time for cloud.google to
recognize my new JavaScript Origin.
I got the error because of Allow-Control-Allow-Origin: * browser extension.
Trying on a different browser(chrome) worked for me and clearing cache on firefox cleared the issue.
(PS: Not add the hosting URIs to Authorized JavaScript origins in API credentials would give you Error:redirect_uri_mismatch)
I was getting the same error but tried publishing my app and now it shows as below:
I am using Selenium Firefox WebDriver through a script in Python3.4.
Is there a way (keyboard shortcut / parameter in about:config / firefox plugin / selenium command / other) to do in the script the following action that I usually can do manually on a Firefox browser?
CTRL+SHIFT+DEL and delete only active logins
Thank you in advance!
Edit:
As explained here the above action clears the HTTP Authentication Cache, unfortunately the following JS only apply to IE.
document.execCommand("ClearAuthenticationCache");
Doing the following in Firefox is not the same as manually doing the action (because does not solve another problem I met, which is solved by CTRL+SHIFT+DEL and delete active logins)
https://foobar#www.example.com/
Any idea?
Firefox gives me connection untrusted for SSL https, and why is that, Chrome shows https in green so, chrome OK, firefox not, why ?
when i install ff 16.0.2, i seem to have same prob with you(untrusted connection especially firefox addon)..For me, it basically cause by my nod32 antivirus, i try go to setting>protocol filtering>ssl>certificates>untick "add the root certificate to known browser''(make sure ff really close)..then tick it again and click OK..done
Please check this:
https://developer.mozilla.org/En/Displaying_web_content_in_an_extension_without_security_issues
I thing you can bypass the warning:
You can tell Firefox to bypass these certificate warnings. You should only bypass the warning if you're sure that the site is legitimate. Legitimate public sites will not ask you to do this. An invalid certificate can be an indication of a web page that will defraud you or steal your identity.
1.On the warning page, click Or you can add an exception....
2.Click Add Exception.... The Add Security Exception dialog will appear.
3.Click Get Certificate.
4.Read the text describing the problems with this site.
5.Click Confirm Security Exception if you want to trust the site.
http://support.mozilla.com/en-US/kb/Secure%20Connection%20Failed
http://support.mozilla.com/en-US/kb/Firefox%20cannot%20connect%20securely%20because%20the%20site%20uses%20an%20older%20insecure%20version%20of%20the%20SSL%20protocol
If any of these TS won't work, then try to update to FF V7. Don't forget to file a bug in bugzilla with all the necessary information.
However if you wish to access sites without accepting the certificate each time, use the add-on skip-cert-error "https://addons.mozilla.org/en-US/firefox/addon/skip-cert-error"
I had this weird issue "Your connection is not secure" whereas Chrome works like a charm.
Actually, it is because i let the corporate pac script to manage the proxy setup ticking the option "use system proxy settings". Actually, Firefox don't like it !
When i switch back to the manual proxy settings, all get back to work.
Of course, you need to known proxy params.
Go & surf ...
Change your Date to current date :D
I had same issue
I'm writing automation scripts for a website using WatiN. when I browse to a particular url, a authentication dialog pops up. I have following code to handle the dialog. This code basically enters the specified
// Create a logon dialog handler
LogonDialogHandler ldh = new LogonDialogHandler(user, password);
browser.DialogWatcher.Add(ldh);
browser.GoTo("URL that pops up the authentication dialog");
Now this works just fine in IE. But in Firefox, the dialog appears and nothing happens after that. (No username or password entered in their text boxes)
Any idea what's going wrong here?
I'm sorry but the automation of firefox popups/dialogs is not supported by WatiN at this moment (WatiN 2.1 and lower). It probably can be done but this is not high on my priority list.