I'm getting the above error as soon as I enable Memcache at my Drupal application.
Memcache is within the same environment as Apache
PHP version 5.5.0
"extension=memcached.so" added to php.ini
Error doesn't appear on local dev environment
Error doesn't appear on another VPS
This issue may be related to an outdated libmemcached version:
https://serverfault.com/questions/456300/upgraded-php-to-5-3-19-and-memcached-stopped-working
Is there anything I can try?
As you can see from the attached picture, extension has a name memcache.so (also, there are several additional extension versions in the modules folder), so it is necessary to specify in the php.ini correct file name. Please, change the name and try if it works.
Related
So I'm building a web app and I decided to move it from my localhost to Jelastic. The app requires one custom module: mod_auth_cas. I followed the instructions on the Jelastic website for adding a module.
The only step I didn't follow was compiling the module against 2.2.15. I tried configuring that version, but I couldn't figure out how to run it concurrently with the 2.2.24 version my Mac runs natively. I figured that a module that worked with 2.2.24 should work with 2.2.15.
I uploaded the .so file to the Jelastic server and added the following LoadModule command to the httpd.conf file:
LoadModule auth_cas_module /usr/lib64/php/modules/mod_auth_cas.so
and restarted Apache. I got the following error:
Failed to start
Stopping httpd [ OK ] Starting httpd
Jelastic autoconfiguration mark httpd
Syntax error on line 161 of /etc/httpd/conf/httpd.conf
Cannot load /usr/lib64/php/modules/mod_auth_cas.so into server
/usr/lib64/php/modules/mod_auth_cas.so invalid ELF header [FAILED]
From the research I did, it seemed as though this error comes when "the installation is
'corrupted' or someone installed something for the wrong processor/binary type."
So I'm trying to figure out what to do. I either need to figure out how to install Apache 2.2.15 and compile a module against that, or I need to figure out what I'm doing wrong on the Jelastic side, or I need to figure out why the .so file is getting corrupted. Which one is it, and how do I do it?
Indeed the problem is the different platforms.
The module was compiled for the correct platform and installed for you.
FYI: To use this module we created a cas.conf file in conf.d please open this file and modify accordingly.
I recommend that you contact your hosting provider and ask them to compile that module for you. The problem is most likely caused by that (compilation on a different system / system that is too dissimilar), or else it's at least the first thing to rule out.
I installed Joomla 3.1.1 Stable on a Centos system.
I can access it, browse through it's admin backend and frontend, but I found in the Extension Manager/Warnings that "The PHP temporary directory is not set"
I went on google and found a fix: I created a php.ini file where I completed this line:
upload_tmp_dir = var/www/html/joomla/tmp
I did that because that is the location where I installed joomla (var/www/html/joomla/)
The fix I found online gave some other location for this folder, it was something with the home/accountname/public_html/... , but I do not have joomla installed in any accounts, it is installed in the "public": var/www/html folder.
I am asking what am I doing wrong because even after doing this, the warning stays the same:
"The PHP temporary directory is not set"
How can I fix this?
I set up the permissions for the entire joomla folder to 40777, and then to the inner folders and files so I would avoid a permission conflict. I then disabled the FTP from Global Settings (before doing this I was receiving a lot more errors when trying to upload anything)
I seriously thought that installing joomla on Centos would not give me so many headaches.
I need to install an extension in joomla (for a template) and I have an error that says nothing to me:"-1 - An error has occurred." - "Copy file failed" so I try to fix any warnings/errors that may cause this before giving up.
The fixes found online about this error (Copy file failed) refer to joomla 1.5 - 1.6. How is it possible that I still get it in version 3.1 ? It is rather absurd.
Any help would be appreciated.
Try to set it via .htaccess file, just add this:
php_value upload_tmp_dir /var/www/html/joomla/tmp
It started working after I changed permissions to ALL subfolders located in var/www/html/joomla
I will reset those permissions after I finish with configuring and customizing the website.
But for now, that was my solution.
-di3sel - the upload_tmp_dir was set up correctly in the php.ini
Thank you both, but my problem seems to be solved now.
I am using Joomla on my website. Now when i try to access the Extension Manager under Extensions, it gives me the following server error
The website encountered an error while retrieving
http://myURL/upload/administrator/index.php?option=com_installer.
It may be down for maintenance or configured incorrectly.
How do i fix it?
Thanks
You should definitely find more information in the error log, but a few things to look at are:
permissions: com_installer may need the tmp folder to be writable
configuration: is your tmp folder configured properly (you can check in system information)
corruption: try reinstalling the update package of Joomla over your current installation (the update package) with ftp/shell
improper routing configuration: you may have some wrong configuration either in your httpd.conf or .htaccess file (try renaming them quickly to see if this is the issue; look for an .htaccess in the administrator folder, and each parent up to the web root (so ./uploads/administrator, ./uploads, . )
I repeat, reading the error log (apache error_log or php error, or turn on debug in Joomla) should give you more than enough information to pinpoint the issue.
I had the same issue when I had forgotten to rename htaccess.txt to .htaccess
I have created a local copy of my remote store (Magento Community 1.6.2.0) using WampServer 2.2E:
Cleared entire Magento cache on remote site
exported remote MySql database using phpMyAdmin
tar'd up the entire remote public_html folder and downloaded to local PC
Recreated directory structure locally under C:\wamp\www\
created a new database locally (I'm using WAMPserver) with appropriate user/pass/DBname according to /app/etc/local.xml -- note: dbase host in local.xml is "localhost"
imported database with no errors
modified mage_core_config_data table's baseurl variables to both point to http://www.localhost.com/
modified local .htaccess to prevent configuration that would result in crashing as well as to modify the rewrite rule that does the 301 redirect for domain.com to www.domain.com (I changed domain.com to be localhost.com).
deleted everything in var/cache, var/session, var/tmp, and the system /tmp folder, as suggested in another Q&A
verified that WAMP has curl PHP extension enabled
So now everything loads except for the admin panel. When I go to http://localhost.com/index.php/admin and log in, the error is:
( ! ) SCREAM: Error suppression ignored for
( ! ) Fatal error: Call to undefined function curl_setopt() in C:\wamp\www\includes\src\Varien_Http_Adapter_Curl.php on line 52
I assume that curl_setopt() is defined in the curl library, and that extension is enabled in WAMPserver.. anyone know what's going on with this?
I just realized that my php version is 5.4.3. Wampserver.com offers a 2.2E package with 5.3.13, but that also doesn't work.
I got this to work only by finally trying wampserver 2.2D, which has php version 5.3.10. I used the 64-bit installer -- didn't try the 32-bit but I assume it will work.. This information is notably absent from the magentocommerce.com wiki entry on setting up Magento with WampServer.
New problem is now no page other than the home page loads (404 not found happens for all product pages and categories). This is solved by ensuring that Apache rewrites are enabled (wampserver menu->apache->apache modules->rewrite_module)
Fatal error: Call to undefined function curl_setopt()
This error mean that php5-curl is not available/activated on your system. You should be able to activate it through the wamp configuration panel.
For linux users, install php5-curl through your packet manager.
I just uploaded a new instance of blogengine.net to a subdomain on my host and I am getting the following error:
Unable to generate a temporary class
(result=1). error CS2001: Source file
'C:\WINDOWS\TEMP\jn5ced1y.0.cs' could
not be found error CS2008: No inputs
specified
I do have VPS plan on my host, do I need to ask for specific permissions?
On previous installs (older versions) of BE I never had this problem - did I do something wrong?
Thank you.
Sounds like a permissions issue on the TEMP directory. I've had the same issue locally on my development machine and took the naughty EVERYONE/ALL route to resolve.