I've created a local NuGet feed for some testing. In an attempt to automate the process, I've tried to create a post-build event to execute the 'NuGet add' for the package. The NuGet add fails with:
Provided Nupkg file 'XXXXX\bin\x64\Debug\XXXXX.1.0.0.nupkg' is not
found.
However, when I look at the folder, the 'nupkg' file is where I expect it to be. I'm using the following command in the post-build event:
nuget add "$(ProjectDir)bin\$(Platform)\$(Configuration)\$(ProjectName).$(PackageVersion).nupkg" -Source "C:\XXXXX\NuGet Local Source"
Is this a problem with 'timing'?
How can I perform the 'NuGet add' in a post-build event?
I found How to run 'nuget add' as a post-build evnet in Visual Studio, but, I can't tell what I'm doing wrong.
After some more digging, I found a workaround. I found .Net Core 2.0 "Generate Nuget package on build" issue with Post-build events that mentioned using "Pack" as an 'AfterTargets'. The current build events tab does not offer 'Pack' as an option. So, the procedure I used was to fill in the post-build event, save the project and close it. Then, I edit the .csproj file and change this line in the file:
<Target Name="PostBuild" AfterTargets="Pack">
This allowed me to run the 'nuget' command from the post-build event.
How to deploy (copy the application files) to multiple locations when TFS build is executed.
See the picture when ever build is initiated I am copying to a location, I wanted to give multiple location in MSBuild Arguments.
MSBuild Arguments : /p:DeployPath=\\ServerName\C$\Inetpub\wwwroot\ApplicationName
Add another CopyDirectory activity to your build process template XAML.
<mtbwa:CopyDirectory DisplayName="Drop Files to Drop Location" Source="[BinariesDirectory]" Destination="[DropLocation]" />
Or, use MSBuild Copy task in the last scipt being run in the build (AKA post-build script).
I have some custom made XML files and a read me file that I've included in my project.
How do I make it so that these files are copied to my debug/release folders automatically when I build my project? I've tried setting the Copy to Output Directory property to "Copy Always" but this doesn't seem to do the trick.
I'm using VS2010
I've found the answer. The build action needs to be set to Content if you want to just directly copy the file to the output folder.
I'd like to copy a file and include the file in the web project and would like to do this as a part of the Pre/Post build events.
My understanding is that these events support DOS commands and I can use xcopy for copying a file, but I am not sure how I would update the csproj file to include the file in the project.
Do you need the file to be in the output directory or actually be part of the .csproj file ?
If you really want to update the csproj file then try customising the AfterBuild target in the csproj file of the startup project in your solution. All csproj files are msbuild files and you can use the full power or msbuild including callling any task. Right click on the project in the solution explorer, select unload project and then edit project. Then customise the AfterBuild target to change the particular csproj file you want. Use built in tasks or the excellent extension pack for changing the file. Finally reload the project.
I have a Visual Studio C++ project that relies on an external DLL file. How can I make Visual Studio copy this DLL file automatically into the output directory (debug/release) when I build the project?
Use a post-build action in your project, and add the commands to copy the offending DLL. The post-build action are written as a batch script.
The output directory can be referenced as $(OutDir). The project directory is available as $(ProjDir). Try to use relative pathes where applicable, so that you can copy or move your project folder without breaking the post-build action.
$(OutDir) turned out to be a relative path in VS2013, so I had to combine it with $(ProjectDir) to achieve the desired effect:
xcopy /y /d "$(ProjectDir)External\*.dll" "$(ProjectDir)$(OutDir)"
BTW, you can easily debug the scripts by adding 'echo ' at the beginning and observe the expanded text in the build output window.
The details in the comments section above did not work for me (VS 2013) when trying to copy the output dll from one C++ project to the release and debug folder of another C# project within the same solution.
I had to add the following post build-action (right click on the project that has a .dll output) then properties -> configuration properties -> build events -> post-build event -> command line
now I added these two lines to copy the output dll into the two folders:
xcopy /y $(TargetPath) $(SolutionDir)aeiscontroller\bin\Release
xcopy /y $(TargetPath) $(SolutionDir)aeiscontroller\bin\Debug
To do it with the GUI, first add the file(s) to the project: right-click the project, select "Add...", then "Existing Item", then browse to the file or files you want to add and click "Add". Next, tell Visual Studio to copy the file when you build: right-click the file you want to copy, select "Properties". You'll see a list of properties, including "Item Type". Change the "Item Type" to "Copy File". Hit OK and you're done.
Here's the file properties dialog:
Looking in the *.vcxproj file, the steps above add something like this:
<ItemGroup>
<CopyFileToFolders Include="libs\a.dll" />
<CopyFileToFolders Include="libs\a.dll" />
</ItemGroup>
I couldn't find any official documentation for <CopyFileToFolders>, but clearly it's supported or the GUI wouldn't use it. But, if you're doing it by hand and an undocumented item type makes you uncomfortable you can always use the well known but slightly more verbose <Content> type:
<ItemGroup>
<Content Include="libs\a.dll" >
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
</Content>
<Content Include="libs\b.dll" >
<CopyToOutputDirectory>PreserveNewest</CopyToOutputDirectory>
</Content>
</ItemGroup>
Add builtin COPY in project.csproj file:
<Project>
...
<Target Name="AfterBuild">
<Copy SourceFiles="$(ProjectDir)..\..\Lib\*.dll" DestinationFolder="$(OutDir)Debug\bin" SkipUnchangedFiles="false" />
<Copy SourceFiles="$(ProjectDir)..\..\Lib\*.dll" DestinationFolder="$(OutDir)Release\bin" SkipUnchangedFiles="false" />
</Target>
</Project>
(This answer only applies to C# not C++, sorry I misread the original question)
I've got through DLL hell like this before. My final solution was to store the unmanaged DLLs in the managed DLL as binary resources, and extract them to a temporary folder when the program launches and delete them when it gets disposed.
This should be part of the .NET or pinvoke infrastructure, since it is so useful.... It makes your managed DLL easy to manage, both using Xcopy or as a Project reference in a bigger Visual Studio solution. Once you do this, you don't have to worry about post-build events.
UPDATE:
I posted code here in another answer https://stackoverflow.com/a/11038376/364818
xcopy /y /d "$(ProjectDir)External\*.dll" "$(TargetDir)"
You can also refer to a relative path, the next example will find the DLL in a folder located one level above the project folder. If you have multiple projects that use the DLL in a single solution, this places the source of the DLL in a common area reachable when you set any of them as the Startup Project.
xcopy /y /d "$(ProjectDir)..\External\*.dll" "$(TargetDir)"
The /y option copies without confirmation.
The /d option checks to see if a file exists in the target and if it does only copies if the source has a newer timestamp than the target.
I found that in at least newer versions of Visual Studio, such as VS2109, $(ProjDir) is undefined and had to use $(ProjectDir) instead.
Leaving out a target folder in xcopy should default to the output directory. That is important to understand reason $(OutDir) alone is not helpful.
$(OutDir), at least in recent versions of Visual Studio, is defined as a relative path to the output folder, such as bin/x86/Debug. Using it alone as the target will create a new set of folders starting from the project output folder. Ex: … bin/x86/Debug/bin/x86/Debug.
Combining it with the project folder should get you to the proper place. Ex: $(ProjectDir)$(OutDir).
However $(TargetDir) will provide the output directory in one step.
Microsoft's list of MSBuild macros for current and previous versions of Visual Studio
I had a similar question. In my project, there were couple of external DLLs. So I created a new folder in the project called "lib" and copied all the external dlls to this folder.
Add a reference to these DLLs.
Go to Project References>dll properties and change the following properties
enter image description here