Does anyone know if there is a Windows equivalent for the RDMA Communication Manager found on Linux (http://linux.die.net/man/7/rdma_cm -- librdmacm), and also ib verbs (libibverbs)?
Both these libraries are available when installing drivers for Infiniband Hardware on Linux distributions.....but what about Windows?
I've read about Windows Network Direct, but since i'm already familiar with the above mentioned Linux libs, I would like to use (if possible) their equivalents on Windows.
I have established data transfer (RDMA writes) between Linux nodes, but now I have to RDMA data from a Windows node to a Linux node, but at the moment I'm not sure which route to follow....
How do I determine whether Windows Network Direct will be compatible with IB verbs/RDMA CM?
I was under the impression that the verbs spec would be implemented on both platforms...!
Kind regards
librdmacm and libibverbs should be provided by your OpenFabrics Enterprise Distribution (OFED). There's an open source OFED for Windows provided by OFA: https://www.openfabrics.org/index.php/-download-windows-installer-.html.
Related
I need to set up USB communication between a Windows 7 host and a Linux device for data transfer. I was able to compile the Linux kernel on the device to include the Gadget Zero driver in the kernel (not as a loadable module - Linux version 3.0.15). My project has some requirements, which also explains why I chose Gadget Zero:
1) On the Windows 7 host, a kernel mode driver must be used to communicate over the USB connection for sending and receiving bulk data. (speed is not important, not a lot of data at once).
2) On the linux device, no requirements on USB side except send and receive data easily over USB link. The data received will eventually be "unmarshalled" to call functions in another kernel module (and those responses packaged and sent back to the host).
3) Multiple linux devices will be connected to the host, so need easy way to enumerate connected devices and communicate with them.
So due to the requirements, I decided against the Gadget Serial. I'm having serious issues sending and receiving data over the virtual COM port in kernel mode (KMDF) in Win 7 host. WinUSB does not seem to want to open my attached device (I'm using KMDF windows USB driver from template in VS2012) Also, the gadget serial driver on the linux side, I cannot find the functions where the data is received and sent. Plus, any received data on the linux device seems to be echoed back to the host for some reason. (and to test this, I wrote a simple user-mode app in Windows, which is a no-no for my project).
Gadget Zero, it appears much simpler on the linux side. I can plug the USB cable to the Win7 host, and I can get the device to appear in the device manager. However, again I am having problems with getting communication going over the link. Gadget Zero has 2 bulk endpoints, so this shouldn't be an issue. Surely, someone has made data communication possible between a Windows host and a linux device using Gadget Zero? With Gadget Zero, it should be easy to enumerate the connected linux devices and communicate with them.
The trick is to keep the Windows side communication in kernel mode. Can someone point me in the right direction perhaps with Gadget Zero, Windows 7 KMDF, and some sample source code? I have a hard time believing no one has done this before because my internet searches don't turn up much. (and mostly user-mode solutions with Gadget Serial).
Thanks!
So you're writing a Win32 driver in which you want to communicate with your linuxed usb? I haven't written much win32 kernel code, but I believe I've seen a huge section in the doc, saying something like "This is how you make usb drivers"... That'd be it. In other words, when in kernel mode you have access to the full kernel usb layer. You don't need an existing driver or whatnot.
On the linux side you can use the serial gadget, in a different run mode. Only the default run mode, registers it self as VCP. There exist a more basic mode:
modprobe g_serial use_acm=0
Give it your own vendor id and you'll be able to attach your very own custom win32 driver. The 'multiple linux devices' will be handled by Windows. (Multiple instances of your driver, will be initiated.)
The echo you're seeing btw, is most likely a terminal feature. (The terminal mode on uarts will echo.) You have to disable it, when connecting. And now that you're at it, you also have to disable the xon/xoff, esc chars etc. (Standard legacy rubbish.)
And another thing. I'm not sure the gadget zero actually sends the data onto the line. It's meant for testing the gadget framework. (I could be mistaken though.)
Anyway, you've prolly solved this issue years ago. I'd be nice to know what you came up with.
I have written a application in Qt and what is the best way to communicate with a custom USB device (does not belong to any class - need to write custom drivers for it) under Windows. In Linux I could just share the data with user space from the /dev or /sys filesystems. What are the equivalent alternative in Windows ?
There are a couple of user-space USB libraries for Windows. While Microsoft do provide WinUSB directly, I'd recommend using either libusbx or libusb and installing the driver for your device with zadig.
Using libusbx rather than the Microsoft driver directly has the advantage of being easier to port to other operating systems, which might be a consideration for you as you are using Qt.
I am aware of windows kernel but new to linux kernel. I just need to know how its done in linux, i.e. the program development.
You can check there (free-electrons.com), it's a good informations source for kernel developement. (specialized in embedded linux, but most of the docs are available for standard development)
You have also the classical Linux Devices Drivers, which is very complete and detailled.
And last but not least, the Linux kernel documentation.
Linux does not have a stable kernel API. This is by design, so you should generally avoid writing kernel code if you can; it is unlikely to remain source-compatible indefinitely, and will definitely NOT be binary-compatible, even between minor releases.
This is less-or-more true for vendor kernels; Redhat etc DO maintain source & binary kernel compatibility between major revisions.
More work is gradually being done in the kernel to reduce the amount of kernel-code required to carry out various tasks, such as driver development (for example, USB drivers can typically be done in userspace with libusb), filesystem development (FUSE) and network filtering (NFQUEUE). However, there are still some cases where you need to; in particular, block devices still need to be in the kernel to be able to be usefully used for boot devices and swap.
My dad is looking for ways to automate checking the settings of a Windows server for giving it a standards compliance grade. He needs to know if more than one OS is installed, but wants to avoid taking down the server at all costs. Is there any technique within Windows (XP and newer) for programmatically ascertaining whether a machine has multiple OSs installed?
It depends on what you consider "an installed OS".
At the very least you'd have to scan all partitions (including the ones Windows's limited filesystem support can't recognize) for filesystems and then see if they "look" like another OS. If you need to know if the alternate OS is bootable as well, you'll have to scan for boot loaders and their configuration as well.
By the way, what difference does it make if there's another OS installed on the computer?
Not entirely reliably. You could attempt to access the MBR and the partition table and sniff for evidence of the competition if you can persuade Windows to let you open the other partitions as raw devices. It would be a heap of work.
How about doing a checksum of the bootloader and comparing it against a known-good list of Windows OS bootloaders on the HDs?
I'm developing a project that has a number of hardware sensors connecting to the deployment machine through RS232 serial ports.
But ... I'm developing on a machine without an physical RS232 serial ports, but I would like to make fake serial ports that I can connect to and output data from with the aim of faking input from hardware sensors.
Does anyone know of a way to create a fake serial port and control it on Windows XP?
If you are developing for Windows, the com0com project might be, what you are looking for.
It provides pairs of virtual COM ports that are linked via a nullmodem connetion. You can then use your favorite terminal application or whatever you like to send data to one COM port and recieve from the other one.
EDIT:
As Thomas pointed out the project lacks of a signed driver, which is especially problematic on certain Windows version (e.g. Windows 7 x64).
There are a couple of unofficial com0com versions around that do contain a signed driver. One recent verion (3.0.0.0) can be downloaded e.g. from here.
I know this is an old post, but in case someone else happens upon this question, one good option is Virtual Serial Port Emulator (VSPE) from Eterlogic
It provides an API for creating kernel mode virtual comport devices, i.e. connectors, mappers, splitters etc.
However, some of the advertised capabilities were really not capabilities at all.
EDIT
A much better choice, Eltima. This product is fully baked. Good developer tech support. The product did all it claimed to do. Product options include both desktop applications, as well as software development kits with APIs.
Neither of these products are open source, or free. However, as other posts here have pointed out, there are other options. Here is a list of various serial utilities:
com0com (current)
com0com - With Signed Driver (old version)
Yet another place for com0com with Signed Driver (Pete's Blog)
Tactical Software
Termite
COM Port Serial Emulator
Kermit (obsolete, but still downloadable)
HWVSP3
HHD Software (free edition)
I use com0com - With Signed Driver, on windows 7 x64 to emulate COM3 AND COM4 as a pair.
Then i use COM Dataport Emulator to recieve from COM4.
Then i open COM3 with the app im developping (c#) and send data to COM3.
The data sent thru COM3 is received by COM4 and shown by 'COM Dataport Emulator' who can also send back a response (not automated).
So with this 2 great programs i managed to emulate Serial RS-232 comunication.
Hope it helps.
Both programs are free!!!!!
There's always the hardware route. Purchase two USB to serial converters, and connect them via a NULL modem.
Pro tips:
1) Windows may assign new COM ports to the adapters after every device sleep or reboot.
2) The market leaders in chips for USB to serial are Prolific and FTDI. Both companies are battling knockoffs, and may be blocked in future official Windows drivers. The Linux drivers however work fine with the clones.
Another alternative, even though the OP did not ask for it:
There exist usb-to-serial adapters.
Depending on the type of adapter, you may also need a nullmodem cable, too.
They are extremely easy to use under linux, work under windows, too, if you have got working drivers installed.
That way you can work directly with the sensors, and you do not have to try and emulate data.
That way you are maybe even save from building an anemic system.
(Due to your emulated data inputs not covering all cases, leading you to a brittle system.)
Its often better to work with the real stuff.
i used eltima make virtual serial port for my modbus application debug work. it is really very good application at development stage to check serial port program without connecting hardware.