How can I set in Windows 'read-only' mode for specific logical disk (like F:), which formatted by FAT32? I know about access permissions politic for removable storage in gpedit.msc, but they works for all logical disk together. I want setting this mode via disk names (F: H: etc). How can I do it? I had tried to write simple C# code, which change access permissions for disk, but it does't work for FAT disks:
System.Security.AccessControl.DirectorySecurity d = System.IO.Directory.GetAccessControl("F:\\");
SecurityIdentifier everyone = new SecurityIdentifier(WellKnownSidType.WorldSid, null);
FileSystemAccessRule accRule = new FileSystemAccessRule(everyone, FileSystemRights.Write, AccessControlType.Deny);
d.AddAccessRule(accRule);
System.IO.Directory.SetAccessControl("F:\\", d);
Related
How do i write to a physical drive in Windows 7?
I am trying to write to a physical disk (e.g. \\.\PhysicalDrive0) in Windows 7.
This question has been asked to death, but has never been answered. It is something that used to work in Windows XP, but Microsoft intentionally broke in Windows Vista. Microsoft provides hints about how to do it, but nobody has even been able to figure it out.
It used to work
In the olden days, writing to a physical disk was allowed (as long as you were an administrator). The method to do it was even documented in a Knowledge Base article:
INFO: Direct Drive Access Under Win32
To open a physical hard drive for direct disk access (raw I/O) in a Win32-based application, use a device name of the form
\\.\PhysicalDriveN
where N is 0, 1, 2, and so forth, representing each of the physical drives in the system.
You can open a physical or logical drive using the CreateFile() application programming interface (API) with these device names provided that you have the appropriate access rights to the drive (that is, you must be an administrator). You must use both the CreateFile() FILE_SHARE_READ and FILE_SHARE_WRITE flags to gain access to the drive.
All that changed in Windows Vista, when addition security restrictions were put in place.
How do you write to a physical disk?
Many people, and many answers, on many stackoverflow questions confuse:
writing to a physical disk (e.g. \\.\PhysicalDrive0), and
writing to a logical volume (e.g. \\.\C$)
Microsoft notes the restrictions placed on both kinds of operations:
Blocking Direct Write Operations to Volumes and Disks
Write operations on a DASD (Direct access storage device) volume handle will succeed if:
the file system is not mounted, or if
The sectors being written to are the boot sectors.
The sectors being written to reside outside file system space.
The file system has been locked implicitly by requesting exclusive write access.
The file system has been locked explicitly by sending down a lock/dismount request.
The write request has been flagged by a kernel-mode driver that indicates that this check should be bypassed. The flag is called SL_FORCE_DIRECT_WRITE and it is in the IrpSp->flags field. This flag is checked by both the file system and storage drivers.
In my case i am asking about writing to a Physical, not a Logical one. Microsoft notes the new set of restrictions on writing to a physical disk handle:
Write operations on a disk handle will succeed if:
The sectors being written to do not fall within a file system.
The sectors being written to fall within a mounted file system that is locked explicitly.
The sectors being written to fall within a file system that is not mounted or the volume has no file system.
My sectors being written do fall within a file system --> fail
My sectors being written do fall within mounted, unlocked, file system --> fail
My sectors being written do fall within a file system that is mounted, and in inside a logical volume that has a file system.
The hints on how to make it work revolve around:
unmounting a file system
locking a file system
But the question is how do you unmount a file system? How do you lock a file system?
What are you doing now?
I am able to read all physical sectors of a disk; that is no problem. The problem is when i want to write to a physical sector of the disk.
The current code i have is, in pseudo-code:
void ZeroSector(Int64 PhysicalSectorNumber)
{
String diskName := '\\.\PhysicalDrive0';
DWORD desiredAccess := GENERIC_READ or GENERIC_WRITE;
//INFO: Direct Drive Access Under Win32
//https://support.microsoft.com/en-us/kb/100027
//says you nedd both
DWORD shareMode := FILE_SHARE_READ or FILE_SHARE_WRITE;
//Open the physical disk
hDisk := CreateFile(diskName, desiredAccess, shareMode,
nil, OPEN_EXISTING, 0, 0);
if hDisk = INVALID_HANDLE_VALUE
RaiseLastWin32Error();
try
{
Int32 bytesPerPhysicalSector := 4096; //Determined elsewhere using IOCTL_STORAGE_QUERY_PROPERTY+STORAGE_ACCESS_ALIGNMENT_DESCRIPTOR
//Setup buffer for what we will be writing
Byte[] buffer = new Byte[bytesPerPhysicalSector];
//Calculate the byte offset of where the sector is
Int64 byteOffset = PhysicalSectorNumber * bytesPerPhysicalSector;
//Seek to that byte offset
SetFilePointer(hDisk, byteOffset.Lo, byteOffset.Hi, FILE_BEGIN);
//Write the buffer
DWORD numberOfBytesWritten;
if (!WriteFile(hDisk, buffer, bytesPerPhysicalSector, out numberOfBytesWritten, nil))
RaiseLastWin32Error();
}
finally
{
CloseHandle(hDisk);
}
}
Surprisingly:
i can open the physical disk for GENERIC_READ + GENERIC_WRITE access
it doesn't fail until the actual WriteFile, which fails with:
ERROR_ACCESS_DENIED
How to do what Microsoft says
Microsoft said that my write would fail, and they were right. They said that i need to explicitly lock the file system:
Write operations on a disk handle will succeed if:
The sectors being written to fall within a mounted file system that is locked explicitly.
Except i don't know how to do that.
I know i probably have to use DeviceIoControl and one of the IOCTLS to "lock" a volume. But that presents three challenges:
figuring out which volume(s) are on the physical disk selected
figuring out which IOCTL to use
figuring out how to unlock the locked volumes
Ignoring those problems, i blindly tried the LockFile API. Just before calling WriteFile:
//Try to lock the physical sector we will be writing
if (!LockFile(DiskHandle, byteOffset.Lo, byteOffset.Hi, bytesPerPhysicalSector, 0)
RaiseLastWin32Error();
That fails with:
ERROR_INVALID_FUNCTION (1)
Check out FSCTL_LOCK_VOLUME, FSCTL_DISMOUNT_VOLUME control codes. I believe you would have to enum all volumes you have on your disk, and then dismount-and-lock them. After lock succeeded, the disk is all yours.
You probably won't be able to do this on a system drive though. I'd also guess that there will be caveats with volumes that contain page files.
after I have done this, I can write to the corresponding \\.\PhysicalDrive3. I could not before:
HANDLE hVol = CreateFileA(
"\\\\.\\X:",
FILE_READ_DATA | FILE_WRITE_DATA,
FILE_SHARE_READ | FILE_SHARE_WRITE,
NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
DWORD unused;
BOOL b = DeviceIoControl(hVol, FSCTL_DISMOUNT_VOLUME, NULL, 0, NULL, 0, &unused, NULL);
if (!b) {
printf("%u", GetLastError());
abort();
}
...
HANDLE h = CreateFileA(
argv[1], // that's my \\physicaldrive3
FILE_READ_DATA | FILE_WRITE_DATA,
FILE_SHARE_READ | FILE_SHARE_WRITE,
NULL,
OPEN_EXISTING,
0,
NULL);
...
bResult = WriteFile(h, buf, cb, &dwWritten, &foo);
if (!bResult) {
// used to fail without messing with vol handle
printf("Failed writing data. Error = %d.\n", GetLastError());
return 0;
}
Do you know you to unmount a drive without ejecting it. NSWorkspace has some methods to unmount drives but it also eject them.
Any idea ?
I am doing it as follows and it un-mounts the drive but doesn't eject it.
(Actually I want to eject the disk, I can only un-mount the disk. :P Please share how to eject a disk.)
DASessionRef session = DASessionCreate(kCFAllocatorDefault);
CFURLRef path = CFURLCreateWithString(NULL, CFSTR("<path_to_your_volume_here>"), NULL);
DADiskRef disk = DADiskCreateFromVolumePath(kCFAllocatorDefault, session, path);
DADiskUnmount(disk, kDADiskUnmountOptionDefault, __unmountCallback, NULL);
This is the code I am still working on and is under development and testing.
I am creating the "path" manually. You can use (and share) a better method to get the path of volume in a generic way. Perhaps this answer has hints of doing it the right way.I'll update when my development is refined and complete.
To do this, use DADiskUnmount in DiskArbitration framework.
http://developer.apple.com/library/mac/#documentation/Darwin/Reference/DiscArbitrationFramework/DiskArbitration_h/index.html#//apple_ref/c/func/DADiskUnmount
To eject the disk, unmount the disk as you stated, and then in your __unmountCallback do the following:
DADiskRef disk2 = DADiskCopyWholeDisk(disk);
DADiskEject(disk2,
kDADiskEjectOptionDefault,
NULL,
NULL);
You can pass any object as context to the DADiskUnmount() and then, for example, use it to determine if the respective disk should be ejected in the __unmountCallback.
I am currently writing a Windows utility that does a similar job as Linux dd. But this utility only copy USED block instead of cloning the whole disk block by block.
The way I write it is to
*
(1) Copy MBR from disk A which contains three partitions to disk B.
(2) after step A. I am able see three raw partitions from disk management GUI. (no drive letter, no file system).
(3) Copy each partitions from A to B in a loop.*
The problem I have is:
in step (3) after I get the file handle from OpenDevice and I try to use that handle to lock a raw partition, I get Access Denied (error 5) and I am 100% sure that my program did not accidentally hold the lock somewhere else. My dev and testing environment is Windows 2003 server and my utility is executed as Admin privilege.
Here is the code snippet:
...
shareMode = FILE_SHARE_READ | FILE_SHARE_WRITE;
fHandle= OpenDevice(shareMode);
res = DeviceIoControl(fHandle, FSCTL_LOCK_VOLUME, NULL, 0, NULL, 0, &dummy, NULL);
if (res == 0)
{
DismountAndLockVolume();
}
...
in my OpenDevice function in use:
DWORD access = (fOpenMode==forWriting) ? (GENERIC_READ | GENERIC_WRITE | SYNCHRONIZE) : GENERIC_READ| SYNCHRONIZE;
NTOpen(&fHandle, fName.c_str(), access, FILE_ATTRIBUTE_NORMAL, shareMode, FILE_OPEN,FILE_SYNCHRONOUS_IO_NONALERT|FILE_RANDOM_ACCESS|FILE_NON_DIRECTORY_FILE);
to get the file handle(fHandle).
In DismountAndLockVolume function, I try to dismount this volume and grab the lock on it again.
DeviceIoControl(fHandle, FSCTL_DISMOUNT_VOLUME, NULL, 0, NULL, 0, &dummy, NULL);
DWORD shareMode = FILE_SHARE_DELETE | FILE_SHARE_WRITE | FILE_SHARE_READ;
ntStatus = OpenDevice(shareMode);
res = DeviceIoControl(fHandle, FSCTL_LOCK_VOLUME, NULL, 0, NULL, 0, &dummy, NULL);
The problem is, when I my code try to dismount this volume, an exception is thrown due to access denied.
Then I browsed the Internet and get the following discussion thread: QUOTE
A write on a volume handle will succeed if the volume is not mounted by a
file system, or if one of the following conditions is true:
1. The sectors to be written to are boot sectors.
2. The sectors to be written to reside outside of file system space.
3. You have explicitly locked or dismounted the volume by using
FSCTL_LOCK_VOLUME or FSCTL_DISMOUNT_VOLUME.
4 . The volume has no file system. (In other words, it has been mounted
as a RAW volume.)
A write on a disk handle will succeed if one of the following conditions
is true:
1. The sectors to be written to do not fall within a volume's extents.
2. The sectors to be written to fall within a mounted volume, but you
have explicitly locked or dismounted the volume by using FSCTL_LOCK_VOLUME
or FSCTL_DISMOUNT_VOLUME.
3. The sectors to be written to fall within a volume that is not mounted
or has no file system.
The modification of some disk parts, like the boot sector ( upto 16 ), is
still allowed . But my utility relies on raw write access to the disk. I am
not able to lock volume by FSCTL_LOCK_VOLUME. Result is ACCESS DENIED. While
searching through net i come to know that kernel mode driver is only
solution. But in this group i come to know driver is not require. I work on
services and pass through SCSI, but i am not able to find the solution. If
kernel mode driver is require then what kind of driver it should be ?
Is anybody know the solution of the problem then please help me out
This thread terminates with no conclusion. Can somebody give me a hand on what was going on? Any hint for possible solution?
Millions of Thanks. I have been scratching my hair for days :-(((.
I'm trying to write a test pattern to every sector of a formatted USB drive. There is one logical drive (e.g. h:). This volume is FAT-formatted and contains data to be overwritten. Also, I want to overwrite the whole physical drive. The program is running with elevated user rights.
First I did the following:
// from the drive letter "h:" I get the physical disk number using
// IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS => "\\.\PhysicalDrive2"
hDevice = ::CreateFile( "\\.\PhysicalDrive2", GENERIC_READ|GENERIC_WRITE,
FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, OPEN_EXISTING, 0, NULL );
// get the number of available sectors with IOCTL_DISK_GET_DRIVE_GEOMETRY_EX
// => ulNumberOfSectors
// now I try to write some sectors, e.g. 2 (I want to use a higher value):
WriteFile( hDevice, abBuffer, 2*512, &byteswritten, NULL );
The call to WriteFile fails with ERROR_ACCESS_DENIED.
If I write one sector, it works.
When I overwrite the first sector and plug the device out and in again, Windows wants to format it. In this situation my code with 2048 sectors at once works without ERROR_ACCESS_DENIED.
I also unmounted the volume as described in CodeProject: WriteFile on Physical Drives with Windows 7 but this didn't change anything. Obviously the volume is unmounted because it's no longer visible in Windows Explorer.
I want to write more than a single sector due to perfomance reasons. I'm also afraid that other problems in the field might occur because I don't fully understand ths problem.
Any suggestions?
I didn't have problems with different WriteFile() sizes, but I did solve the
WriteFile(): Access is denied <ERROR_ACCESS_DENIED/5> to
'\.\physicaldriveX
devices (usually USB HDD/SSD) in Windows 7 running as Administrator (elevated rights) as follows:
Computer Management -> Disk Management:
Volume (H: in your case) -> right-click -> Delete Volume
Disk (Disk 2 in your case) -> right-click -> Off-line
Disk (Disk 2 in your case) -> right-click -> On-line
After that, I'm able to write to '\.\physicaldriveX' with no problem.
I think the Win7 locks (unlike previous Windows releases) the physical device as long as there is any file system on the device to avoid consistency problems.
You cannot directly access sectors of a drive which are owned by a mounted filesystem.
See Changes to the file system and to the storage stack to restrict direct disk access and direct volume access
The documentation for FSCTL_DISMOUNT_VOLUME describes the following sequence for overwriting a filesystem:
Open a volume.
Lock the volume.
Format the volume.
Dismount the volume.
Unlock the volume.
Close the volume handle.
Your pattern-writing operation would be in step 3 instead of formatting.
Another method is to use clean to delete all the partitions (and ALL DATA) on the disk:
C:\> diskpart
Diskpart> list disk
Diskpart> select disk N (where N is your disk number)
Diskpart> clean
Diskpart> exit
I'm trying to figure out the available disk space programmatically in windows. For this, I need to first get a list of the available drives, then check which of those are local drives and then query the available bytes on each local drive.
I'm a bit stuck on the first part, where the API presents two functions:
GetLogicalDrives (http://msdn.microsoft.com/en-us/library/aa364972(VS.85).aspx) which gives you a DWORD with the bits set (bit 0 if drive A is present, bit 1 if drive B etc)
GetLogicalDriveStrings (http://msdn.microsoft.com/en-us/library/aa364975(VS.85).aspx) which gives you the actual strings.
Now, although I'll be using strings later on, I'd prefer using the first option for querying. However, on my system a DWORD is typedef-ed to "unsigned long", which is 4 bytes, whereas drive letters only range A-Z (26 - i think - characters). Obviously, one can define more than 26 drives on their system (however unlikely they are to do so) - so I was wondering if there was any convention for those drives. Can someone point me to a resource on this?
Thanks.
DWORD is always 4 bytes, regardless of the system (it's a Win32 type).
The maximum for drive letters in Windows is 26. Because English alphabet has only 26 letters :). However, Windows allows two ways to mount a volume:
to a drive letter
to a directory (on an NTFS volume).
You can mount one volume to multiple locations (but no more than one drive letter, IIRC). A GUI for this task is presented by Control Panel -> Administrative Tools -> Computer Management -> Disk Management.
If you want to have more than 26 drives with the additional drives being redirects to already active drives and are okay with them not working properly in most programs, then you can assign more with the following method (be warned they won't even show up in the file explorer):
subst ♪: C:\Temp\
cd /D ♪:\
and to delete them (also they aren't preserved through restarts):
subst /D ♪:
You can enumerate all volumes and their mount points as described in this article.
You could use WMI. The following WMI query should list all drives:
SELECT * FROM Win32_DiskDrive
It it not sufficient to enumerate MS-DOS drives (there can be at most 26 of them, by the way, although each can be bound twice, once globally and once locally in your session), a volume can, for example, be mounted to a directory. What you want is probably to enumerate all volumes in the system, using FindFirstVolume et al. Take a look at the associated MSDN example.