In the example of gob usage http://golang.org/src/encoding/gob/example_interface_test.go they provide the following thesis:
Pass pointer to interface so Encode sees (and hence sends) a value of interface type. If we passed p directly it would see the concrete type instead. See the blog post, "The Laws of Reflection" for background.
I've read The Laws of reflection twice, and a related Russ Cox article too. But I can't find a distinction between pointer-to-interface and interface there.
So why is it that through the pointer it sees a value of interface type, and with no pointer it sees (surprisingly to me) the concrete type?
It seems to me that the relevant part is this:
Continuing, we can do this:
var empty interface{}
empty = w
and our empty interface value empty will again contain that same pair, (tty, *os.File). That's handy: an empty interface can hold any value and contains all the information we could ever need about that value.
(emphasis added)
When you assign an interface value to a value of type interface{}, the "pointer to data" part of the new value doesn't point to the old value, but rather to the data old value was pointing to. We can prove that with a bit of unsafe code:
type iface struct {
Type, Data unsafe.Pointer
}
var r io.Reader = &bytes.Buffer{}
var i interface{} = r
rr := *(*iface)(unsafe.Pointer(&r))
ii := *(*iface)(unsafe.Pointer(&i))
fmt.Printf("%v\n", ii.Data == rr.Data) // Prints true.
On the other hand, if we use a pointer, it will point to the interface value itself. So now reflect can actually see, what interface exactly are we talking about. E.g.:
var i2 interface{} = &r
ii2 := *(*iface)(unsafe.Pointer(&i2))
fmt.Printf("%v\n", ii2.Data == unsafe.Pointer(&r)) // Prints true.
Playground: http://play.golang.org/p/0ZEMdIFhIj
Related
In Go, suppose I have a []byte of UTF-8 that I want to return as a string.
func example() *string {
byteArray := someFunction()
text := string(byteArray)
return &text
}
I would like to eliminate the text variable, but Go doesn't support the following:
func example() *string {
byteArray := someFunction()
return &string(byteArray)
}
Is this second example syntax correct? And if so, why doesn't Go support it?
Because the spec defines is that way:
For an operand x of type T, the address operation &x generates a pointer of type *T to x. The operand must be addressable, that is, either a variable, pointer indirection, or slice indexing operation; or a field selector of an addressable struct operand; or an array indexing operation of an addressable array. As an exception to the addressability requirement, x may also be a (possibly parenthesized) composite literal.
Notice that type conversions (what you are trying to do with string(byteArray)) are not included in this list.
See Marc's answer for an official citation, but here's an intuitive reason for why Go doesn't support this.
Suppose the following code
var myString string
stringPointer := &myString
*stringPointer = "some new value"
Hopefully you know, this code will write some new value into myString. This is a basic use of pointers. Now consider the modified example (pretending that it is valid code):
var myBytes []byte
// modify myBytes...
stringPointer := &string(myString)
*stringPointer = "some new value"
The question is, where in the world (or computer) are we writing to?? Where is some new value going?
In order for the language to handle this correctly, the compiler would need some internal process to "promote" the temporary value to an invisible variable, and then take the address of that. This would be adding needless complexity to make some code slightly shorter, but create this confusing situation where we have pointers with no well defined location in the program. Instead of creating these confusing ghost-variables, the language delegates to the programmer to use their own variable as usual.
hi a have this func for get type of value, but i try this and never can get reflect.struct:
type Test struct {
Code int
Name string
}
func main(){
test := getTest()
data, err := getBytes(slice...)
sanitizedFile := bytes.Split(data, []byte("\r\n"))
err = Unmarshal(sanitizedFile[0], &test)
}
func getTest() interface{} {
return Test{}
}
With this code i don't can get the reflecet.struct from v params in Unmarshall func
func Unmarshal(data []byte, v interface{}) error {
rv := reflect.ValueOf(v)
if rv.Kind() == reflect.Ptr {
rvElem := rv.Elem()
switch rvElem.Kind() {
case reflect.Struct:
// implement me
}
}
return ErrInvalid
}
I would like to know if I can somehow find out if an interface is of type struct or access the values of that struct.
I think the real problem here is illustrated by this quote:
I would like to know if I can somehow find out if an interface is of type struct or access the values of that struct.
An interface value isn't "of type struct". Never! An interface value can contain a value whose type is some structure, but it is not a value of that type. It just contains one. This is similar to the way that a box1 you get from Amazon can contain a corkscrew, but the box is not a corkscrew, ever.
Given a non-nil value of type interface I for some interface type I, you know that you have a value that implements the methods of I. Since {} is the empty set of methods, all types implement it, so given a (still non-nil) value of type interface{}, you have a value that implements no methods. That's not at all useful by itself: it means you can invoke no methods, which means you can't do anything method-like.
But just because you can't do anything method-y doesn't mean you can't do anything at all. Any interface value, regardless of the interface type, can have a type-assertion used on it:
iv := somethingThatReturnsAnInterface()
cv := iv.(struct S) // assert that iv contains a `struct S`
If iv does in fact contain a struct S value—if that's what's inside the box once you open it—then this type-assertion doesn't panic, and cv winds up with the concrete value of type struct S. If panic is undesirable, we can use the cv, ok := iv.(struct S) form, or a type switch. All of these—including the version that panics—work by checking the type of the value inside the interface.
What this—or, more precisely, the way the Go language is defined—tells us is that the interface "box" really holds two things:
a concrete type, and
a concrete value.
Well, that is, unless it holds a <nil, nil> pair, in which case iv == nil is true. Note that the iv == nil test actually tests both parts.
If Go had a syntax for this, we could write something like iv.type and iv.value to get at the two separate parts. But we can't do that. We have to use type assertions, type-switch, or reflect. So, going back to this:
I would like to know if I can somehow find out if an interface is of type struct
we can see that the question itself is just a little malformed. We don't want to know if an interface value has this type. We want to know if a non-nil interface's held value is of this type, as if we could inspect iv.type and iv.value directly.
If you have a limited set of possible types, you can use the type-switch construct, and enumerate all your allowed possiblities:
switch cv := iv.(type) {
case struct S:
// work with cv, which is a struct S
case *struct S:
// work with cv, which is a *struct S
// add more cases as appropriate
}
If you need more generality, instead of doing the above, we end up using the reflect package:
tv := reflect.TypeOf(iv)
or:
vv := reflect.ValueOf(iv)
The latter is actually the more useful form, since vv captures both the iv.type pseudo-field and the iv.value pseudo-field.
As mkopriva notes in a comment, test, in your sample code, has type interface{}, so &test has type *interface{}. In most cases this is not a good idea: you just want to pass the interface{} value directly.
To allow the called function to set the object to a new value, you will want to pass a pointer to the object as the interface value. You do not want to pass a pointer to the interface while having the interface hold the struct "in the box" as it were. You need a reflect.Value on which you can invoke Set(), and to get one, you will need to follow an elem on the reflect.Value that is a pointer to the struct (not one that is a pointer to the interface).
There's a more complete example here on the Go Playground.
1This is partly an allusion to "boxed values" in certain other programming languages (see What is boxing and unboxing and what are the trade offs?), but partly literal. Don't mistake Go's interfaces for Java's boxed values, though: they are not the same at all.
Maybe what you need is type assertion?
t, ok := v.(myStruct)
https://tour.golang.org/methods/15
In any case this code prints "struct":
type tt struct {}
var x tt
var z interface{}
z = x
v := reflect.ValueOf(z).Kind()
fmt.Printf("%v\n", v)
And see this for setting the value of a struct field using reflection:
Using reflect, how do you set the value of a struct field?
I started learning golang a couple of days ago and found reflect.Valueof() and Value.Elem() quite confusing. What is the difference between this two function/methods and how to use them correctly?
Both function/methods return a Value, and according to the go doc
ValueOf returns a new Value initialized to the concrete value stored in the interface i. ValueOf(nil) returns the zero Value.
Elem returns the value that the interface v contains or that the pointer v points to. It panics if v's Kind is not Interface or Ptr. It returns the zero Value if v is nil.
I found this code from a post on stackoverflow but still don't understand when to use .Elem()
func SetField(obj interface{}, name string, value interface{}) error {
// won't work if I remove .Elem()
structValue := reflect.ValueOf(obj).Elem()
structFieldValue := structValue.FieldByName(name)
if !structFieldValue.IsValid() {
return fmt.Errorf("No such field: %s in obj", name)
}
if !structFieldValue.CanSet() {
return fmt.Errorf("Cannot set %s field value", name)
}
structFieldType := structFieldValue.Type()
// won't work either if I add .Elem() to the end
val := reflect.ValueOf(value)
if structFieldType != val.Type() {
return fmt.Errorf("Provided value %v type %v didn't match obj field type %v",val,val.Type(),structFieldType)
}
structFieldValue.Set(val)
return nil
}
reflect.ValueOf() is a function, think of it as the entry point to reflection. When you have a "non-reflection" value, such as a string or int, you can use reflect.ValueOf() to get a reflect.Value descriptor of it.
Value.Elem() is a method of reflect.Value. So you can only use this if you already have a reflect.Value. You may use Value.Elem() to get the value (reflect.Value) pointed by the value wrapped by the original reflect.Value. Note that you may also use reflect.Indirect() for this. There's another "use case" for Value.Elem(), but it's more "advanced", we return to it at the end of the answer.
To "leave" reflection, you may use the general Value.Interface() method, which returns you the wrapped value as an interface{}.
For example:
var i int = 3
var p *int = &i
fmt.Println(p, i)
v := reflect.ValueOf(p)
fmt.Println(v.Interface()) // This is the p pointer
v2 := v.Elem()
fmt.Println(v2.Interface()) // This is i's value: 3
This will output (try it on the Go Playground):
0x414020 3
0x414020
3
For a great introduction to Go's reflection, read The Go Blog: The Laws of Reflection. Although if you're just starting with Go, I'd focus on other things and leave reflection for a later adventure.
Another use case for Value.Elem()
This is kind of an advanced topic, so don't freak out if you don't understand it. You don't need to.
We saw how Value.Elem() can be used to "navigate" when a pointer is wrapped in the reflect.Value. Doc of Value.Elem() says:
Elem returns the value that the interface v contains or that the pointer v points to.
So if reflect.Value wraps an interface value, Value.Elem() may also be used to get the concrete value wrapped in that interface value.
Interfaces in Go is its own topic, for the internals, you may read Go Data Structures: Interfaces by Russ Cox. Again, not necessarily a topic for Go starters.
Basically whatever value you pass to reflect.ValueOf(), if it's not already an interface value, it will be wrapped in an interface{} implicitly. If the passed value is already an interface value, then the concrete value stored in it will be passed as a interface{}. This second "use case" surfaces if you pass a pointer to interface (which is otherwise very rare in Go!).
So if you pass a pointer to interface, this pointer will be wrapped in an interface{} value. You may use Value.Elem() to get the pointed value, which will be an interface value (not a concrete value), and using Value.Elem() again on this will give you the concrete value.
This example illustrates it:
var r io.Reader = os.Stdin // os.Stdin is of type *os.File which implements io.Reader
v := reflect.ValueOf(r) // r is interface wrapping *os.File value
fmt.Println(v.Type()) // *os.File
v2 := reflect.ValueOf(&r) // pointer passed, will be wrapped in interface{}
fmt.Println(v2.Type()) // *io.Reader
fmt.Println(v2.Elem().Type()) // navigate to pointed: io.Reader (interface type)
fmt.Println(v2.Elem().Elem().Type()) // 2nd Elem(): get concrete value in interface: *os.File
Try it on the Go Playground.
I'm new to interfaces and trying to do SOAP request by github
I don't understand the meaning of
Msg interface{}
in this code:
type Envelope struct {
Body `xml:"soap:"`
}
type Body struct {
Msg interface{}
}
I've observed the same syntax in
fmt.Println
but don't understand what's being achieved by
interface{}
Note: Go 1.18 (Q1 2022) does rename interface{} to any (alias for interface{}).
See issue 49884, CL 368254 and commit 2580d0e.
See the last part of this answer.
You can refer to the article "How to use interfaces in Go" (based on "Russ Cox’s description of interfaces"):
What is an interface?
An interface is two things:
it is a set of methods,
but it is also a type
The interface{} type (or any with Go 1.18+), the empty interface is the interface that has no methods.
Since there is no implements keyword, all types implement at least zero methods, and satisfying an interface is done automatically, all types satisfy the empty interface.
That means that if you write a function that takes an interface{} value as a parameter, you can supply that function with any value.
(That is what Msg represents in your question: any value)
func DoSomething(v interface{}) {
// ...
}
func DoSomething(v any) {
// ...
}
Here’s where it gets confusing:
inside of the DoSomething function, what is v's type?
Beginner gophers are led to believe that “v is of any type”, but that is wrong.
v is not of any type; it is of interface{} type.
When passing a value into the DoSomething function, the Go runtime will perform a type conversion (if necessary), and convert the value to an interface{} value.
All values have exactly one type at runtime, and v's one static type is interface{} (or any with Go 1.18+).
An interface value is constructed of two words of data:
one word is used to point to a method table for the value’s underlying type,
and the other word is used to point to the actual data being held by that value.
Addendum: This is were Russ's article is quite complete regarding an interface structure:
type Stringer interface {
String() string
}
Interface values are represented as a two-word pair giving a pointer to information about the type stored in the interface and a pointer to the associated data.
Assigning b to an interface value of type Stringer sets both words of the interface value.
The first word in the interface value points at what I call an interface table or itable (pronounced i-table; in the runtime sources, the C implementation name is Itab).
The itable begins with some metadata about the types involved and then becomes a list of function pointers.
Note that the itable corresponds to the interface type, not the dynamic type.
In terms of our example, the itable for Stringer holding type Binary lists the methods used to satisfy Stringer, which is just String: Binary's other methods (Get) make no appearance in the itable.
The second word in the interface value points at the actual data, in this case a copy of b.
The assignment var s Stringer = b makes a copy of b rather than point at b for the same reason that var c uint64 = b makes a copy: if b later changes, s and c are supposed to have the original value, not the new one.
Values stored in interfaces might be arbitrarily large, but only one word is dedicated to holding the value in the interface structure, so the assignment allocates a chunk of memory on the heap and records the pointer in the one-word slot.
Issue 33232 seems to point out to any as an alias to interface{} in Go 1.18 (Q1 2022)
Russ Cox explains:
'any' being only for constraints is a detail that will be in every writeup of generics - books, blog posts, and so on.
If we think we are likely to allow it eventually, it makes sense to allow it from the start and avoid invalidating all that written material.
'any' being only for constraints is an unexpected cut-out that reduces generality and orthogonality of concepts.
It's easy to say "let's just wait and see", but prescribing uses tends to create much more jagged features than full generality. We saw this with type aliases as well (and resisted almost all the proposed cut-outs, thankfully).
If 'any' is allowed in generics but not non-generic code, then it might encourage people to overuse generics simply because 'any' is nicer to write than 'interface{}', when the decision about generics or not should really be made by considering other factors.
If we allow 'any' for ordinary non-generic usage too, then seeing interface{} in code could serve as a kind of signal that the code predates generics and has not yet been reconsidered in the post-generics world.
Some code using interface{} should use generics. Other code should continue to use interfaces.
Rewriting it one way or another to remove the text 'interface{}' would give people a clear way to see what they'd updated and hadn't. (Of course, some code that might be better with generics must still use interface{} for backwards-compatibility reasons, but it can still be updated to confirm that the decision was considered and made.)
That thread also includes an explanation about interface{}:
It's not a special design, but a logical consequence of Go's type declaration syntax.
You can use anonymous interfaces with more than zero methods:
func f(a interface{Foo(); Bar()}) {
a.Foo()
a.Bar()
}
Analogous to how you can use anonymous structs anywhere a type is expected:
func f(a struct{Foo int; Bar string}) {
fmt.Println(a.Foo)
fmt.Println(a.Bar)
}
An empty interface just happens to match all types because all types have at least zero methods.
Removing interface{} would mean removing all interface functionality from the language if you want to stay consistent / don't want to introduce a special case.
interface{} means you can put value of any type, including your own custom type. All types in Go satisfy an empty interface (interface{} is an empty interface).
In your example, Msg field can have value of any type.
Example:
package main
import (
"fmt"
)
type Body struct {
Msg interface{}
}
func main() {
b := Body{}
b.Msg = "5"
fmt.Printf("%#v %T \n", b.Msg, b.Msg) // Output: "5" string
b.Msg = 5
fmt.Printf("%#v %T", b.Msg, b.Msg) //Output: 5 int
}
Go Playground
There are already good answers here. Let me add my own too for others who want to understand it intuitively:
Interface
Here's an interface with one method:
type Runner interface {
Run()
}
So any type that has a Run() method satisfies the Runner interface:
type Program struct {
/* fields */
}
func (p Program) Run() {
/* running */
}
func (p Program) Stop() {
/* stopping */
}
Although the Program type has also a Stop method, it still satisfies the Runner interface because all that is needed is to have all of the methods of an interface to satisfy it.
So, it has a Run method and it satisfies the Runner interface.
Empty Interface
Here's a named empty interface without any methods:
type Empty interface {
/* it has no methods */
}
So any type satisfies this interface. Because, no method is needed to satisfy this interface. For example:
// Because, Empty interface has no methods, following types satisfy the Empty interface
var a Empty
a = 5
a = 6.5
a = "hello"
But, does the Program type above satisfy it? Yes:
a = Program{} // ok
interface{} is equal to the Empty interface above.
var b interface{}
// true: a == b
b = a
b = 9
b = "bye"
As you see, there's nothing mysterious about it but it's very easy to abuse. Stay away from it as much as you can.
https://play.golang.org/p/A-vwTddWJ7G
It's called the empty interface and is implemented by all types, which means you can put anything in the Msg field.
Example :
body := Body{3}
fmt.Printf("%#v\n", body) // -> main.Body{Msg:3}
body = Body{"anything"}
fmt.Printf("%#v\n", body) // -> main.Body{Msg:"anything"}
body = Body{body}
fmt.Printf("%#v\n", body) // -> main.Body{Msg:main.Body{Msg:"anything"}}
This is the logical extension of the fact that a type implements an interface as soon as it has all methods of the interface.
From the Golang Specifications:
An interface type specifies a method set called its interface. A
variable of interface type can store a value of any type with a method
set that is any superset of the interface. Such a type is said to
implement the interface. The value of an uninitialized variable of
interface type is nil.
A type implements any interface comprising any subset of its methods
and may therefore implement several distinct interfaces. For instance,
all types implement the empty interface:
interface{}
The concepts to graps are:
Everything has a Type. You can define a new type, let's call it T. Let's say now our Type T has 3 methods: A, B, C.
The set of methods specified for a type is called the "interface type". Let's call it in our example: T_interface. Is equal to T_interface = (A, B, C)
You can create an "interface type" by defining the signature of the methods. MyInterface = (A, )
When you specify a variable of type, "interface type", you can assign to it only types which have an interface that is a superset of your interface.
That means that all the methods contained in MyInterface have to be contained inside T_interface
You can deduce that all the "interface types" of all the types are a superset of the empty interface.
An example that extends the excellent answer by #VonC and the comment by #NickCraig-Wood. interface{} can point to anything and you need a cast/type assertion to use it.
package main
import (
. "fmt"
"strconv"
)
var c = cat("Fish")
var d = dog("Bone")
func main() {
var i interface{} = c
switch i.(type) {
case cat:
c.Eat() // Fish
}
i = d
switch i.(type) {
case dog:
d.Eat() // Bone
}
i = "4.3"
Printf("%T %v\n", i, i) // string 4.3
s, _ := i.(string) // type assertion
f, _ := strconv.ParseFloat(s, 64)
n := int(f) // type conversion
Printf("%T %v\n", n, n) // int 4
}
type cat string
type dog string
func (c cat) Eat() { Println(c) }
func (d dog) Eat() { Println(d) }
i is a variable of an empty interface with a value cat("Fish"). It is legal to create a method value from a value of interface type. See https://golang.org/ref/spec#Interface_types.
A type switch confirms i interface type is cat("Fish") . See https://golang.org/doc/effective_go.html#type_switch. i is then reassigned to dog("Bone"). A type switch confirms that i interface’s type has changed to dog("Bone") .
You can also ask the compiler to check that the type T implements the interface I by attempting an assignment: var _ I = T{}. See https://golang.org/doc/faq#guarantee_satisfies_interface and https://stackoverflow.com/a/60663003/12817546.
All types implement the empty interface interface{}. See https://talks.golang.org/2012/goforc.slide#44 and https://golang.org/ref/spec#Interface_types . In this example, i is reassigned, this time to a string "4.3".i is then assigned to a new string variable s with i.(string) before s is converted to a float64 type f using strconv. Finally f is converted to n an int type equal to 4. See What is the difference between type conversion and type assertion?
Go's built-in maps and slices, plus the ability to use the empty interface to construct containers (with explicit unboxing) mean in many cases it is possible to write code that does what generics would enable, if less smoothly. See https://golang.org/doc/faq#generics.
Interface is a type which is unknown at compile time
It is a contract between object and the struct type to satisfy with common functionality
or
common functionality acting on different types of struct objects
for example in the below code PrintDetails is a common functionality acting on different types of structs as Engineer,Manager,
Seniorhead
please find the example code
interface examplehttps://play.golang.org/p/QnAqEYGiiF7
A method can bind to any type(int, string, pointer, and so on) in GO
Interface is a way of declear what method one type should have, as long as A type has implement those methods, this can be assigned to this interface.
Interface{} just has no declear of method, so it can accept any type
I'm currently reading the source code of the https://github.com/codegangsta/inject go package to understand how does this package works.
I have some questions concerning the file https://github.com/codegangsta/inject/blob/master/inject.go file thats use some element of the Go language I don't understand and don't find precise explanations in the documentation.
// InterfaceOf dereferences a pointer to an Interface type.
// It panics if value is not an pointer to an interface.
func InterfaceOf(value interface{}) reflect.Type {
t := reflect.TypeOf(value)
for t.Kind() == reflect.Ptr {
t = t.Elem()
}
if t.Kind() != reflect.Interface {
panic("Called inject.InterfaceOf with a value that is not a pointer to an interface. (*MyInterface)(nil)")
}
return t
}
My first question is concerning the for loop. Why does it uses a for loop with a test expression ?
The second relates to the message in the panic function. "A pointer to an interface" is mentioned with the (*MyInterface)(nil). I only encounter a similar construction in the go documentation concerning 'compile time checking structure' when you check that a type implements a structure :
var _ SomeType = (*SomeInterface)(nil)
I did not find any informations about a statement with (*Interface)(nil) and pointer to interface.
How should we interpret this statement ? What is the relation with a pointer to interface and where could I find informations about pointer to interface ?
To summarize both answers:
The for loop
for t.Kind() == reflect.Ptr {
t = t.Elem()
}
t.Elem() is the reflection equivalent to *t, so what this loop does it dereferencing t as long as it holds another pointer value. At the end of the loop, t will hold the value that the last pointer pointed to, not a pointer anymore.
The message
Called [...] with a value that is not a pointer to an interface. (*MyInterface)(nil)
The expression (*MyInterface)(nil) is just an (poorly phrased) example of what is expected as parameter.
The syntax is that of a conversion. A conversion will attempt to convert a value (in this case nil) to a given type (*MyInterface) in this case. So,
(*MyInterface)(nil)
will give you a zero value of a *MyInterface whose interface type would be MyInterface (play):
x := (*MyInterface)(nil)
InterfaceOf(x) // MyInterface
Of course, this value does not point somewhere meaningful.
Compile time checking of interface implementation
To avoid confusion, the construct you showed
var _ SomeType = (*SomeInterface)(nil)
is probably not what you wanted. I guess you wanted this:
var _ SomeInterface = (*SomeType)(nil)
This construct enables compile time checking of interface implementation for certain types.
So in case you're writing a library of some sort and you want to satisfy an interface without
using it, you can use this to make sure that your struct implements the interface.
Why this works
First of all, var _ someType is a variable that is going to be checked by the compiler but
will not be in the compiled program and is not accessible due to the Blank Identifier _:
The blank identifier may be used like any other identifier in a declaration, but it does not introduce a binding and thus is not declared.
This enables you do declare an arbitrary number of these constructs without interfering with the
rest of the program.
You can declare a zero value of a pointer of any type by writing:
(*T)(nil)
Check this example on play.
Next, assignability says that x is assignable to T if T is an interface and x implements T.
So to summarize:
T _ = (*x)(nil)
enforces that x implements T as everything else would be an error.
The for loop is used to continually dereference the type until it is no longer a pointer. This will handle case where the type acquired an extra indirection(s).
e.g. play.golang.org/p/vR2gKNJChE
As for the (*MyInterface)(nil), pointers to interfaces always1 an error Go code. I assume the author is just describing what he means by pointer to interface with a code snippet since they are so rare.
If you're still intrigued by the forbidden type Russ Cox has some info how exactly all this works under the hood: research.swtch.com/interfaces. You'll have a hard time finding info on the use of pointers to an interface because [1].
(1) OK not really always, but honestly don't do it unless you're a Go pro. In which case don't tell anyone about it.
That for loop is identical to while loop in other languages
The second thing is just a syntax for conversions:
(*Point)(p) // p is converted to *Point
Because how this library works you just have to pass the pointer to interface, for loop then dereferences it (if we pass something like (***MyInterface)(nil)) and then if statement checks if the ty[e pointed to is an interface.