I imported an Earth model into My Maps, then exported it to a KMZ. I unzipped the KMZ and ran the resulting doc.kml through a a validator (XmlValidator) against the XSD at http://schemas.opengis.net/kml/2.2.0/ogckml22.xsd.
The response?
C:\Users\Bugmagnet\Downloads\XmlValidate-master>bin\xv.bat -v -kmz ..\doc.kml
Check: ..\doc.kml
http://www.opengis.net/kml/2.2
ERROR: SAXParseException org.xml.sax.SAXParseException; lineNumber: 3319; columnNumber: 38; cvc-complex-type.2.4.a:
Invalid content was found starting with element 'Style'. One of '{"http://www.opengis.net/kml/2.2":AbstractFeatureGroup, "http://www.opengis.net/kml/2.2":DocumentSimpleExtensionGroup, "http://www.opengis.net/kml/2.2":DocumentObjectExtensionGroup}' is expected.
Line: 3319, column: 38
3319: <Style id="line-000000-1-normal">***
ERROR: SAXParseException org.xml.sax.SAXParseException; lineNumber: 3319; columnNumber: 38; cvc-complex-type.2.4.a:
Invalid content was found starting with element 'Style'. One of '{"http://www.opengis.net/kml/2.2":AbstractFeatureGroup, "http://www.opengis.net/kml/2.2":DocumentSimpleExtensionGroup, "http://www.opengis.net/kml/2.2":DocumentObjectExtensionGroup}' is expected.
Line: 3319, column: 38
Errors: 2 Warnings: 0 Files: 1 Time: 3659 ms
Valid files 0/1 (0%)
Is this important? Will it bite me later? What, if anything, can or should be done?
I'm asking because I'm using the KML exported from Maps as a template for generating KML programmatically for use in Maps.
Strangely, the first instance of the markup <Style id="line-000000-1-normal"> is not on line 3319 but on 4022 being
<Style id='line-000000-1-normal'>
<LineStyle>
<color>ff000000</color>
<width>1</width>
</LineStyle>
</Style>
Line 3199 is part way through a Placemark, on the , viz
<Placemark>
<name>LPVGDatumLutID {133}- Swan Hill</name>
<description>
<![CDATA[Log Provider [10] Google Analytics V3]]>
</description>
<styleUrl>#poly-000000-1-76</styleUrl>
<ExtendedData>
</ExtendedData>
<Polygon>
<outerBoundaryIs>
<LinearRing>
<tessellate>1</tessellate>
<coordinates>143.5614,-35.250688,0.0 143.555643,-35.250811,0.0 143.549902,-35.25118,0.0 143.544192,-35.251793,0.0 143.538529,-35.25264899999999,0.0 143.532928,-35.253746,0.0 143.527406,-35.25508000000001,0.0 143.521976,-35.256649,0.0 143.516654,-35.258447,0.0 143.511454,-35.26046899999999,0.0 143.506391,-35.26271100000001,0.0 143.501478,-35.265166,0.0 143.496729,-35.267828,0.0 143.492156,-35.270688,0.0 143.487773,-35.27373999999999,0.0 143.483592,-35.276975,0.0 143.479623,-35.280383,0.0 143.475877,-35.283957,0.0 143.472366,-35.287686,0.0 143.469098,-35.29155900000001,0.0 143.466083,-35.295567000000005,0.0 143.463328,-35.299698,0.0 143.460842,-35.30394100000001,0.0 143.458631,-35.308284,0.0 143.456702,-35.312715,0.0 143.455059,-35.317223,0.0 143.453707,-35.32179500000001,0.0 143.45265,-35.326419,0.0 143.451892,-35.331081,0.0 143.451433,-35.335769,0.0 143.451276,-35.34047000000001,0.0 143.45142,-35.345172,0.0 143.451866,-35.349861,0.0 143.452613,-35.354524,0.0 143.453657,-35.35914900000001,0.0 143.454998,-35.363723,0.0 143.45663,-35.368234,0.0 143.458549,-35.372668999999995,0.0 143.460751,-35.377016000000005,0.0 143.46322900000004,-35.381263000000004,0.0 143.465977,-35.385398,0.0 143.468986,-35.389411,0.0 143.47224900000003,-35.39328900000001,0.0 143.475757,-35.397023,0.0 143.479501,-35.400601,0.0 143.483469,-35.404015,0.0 143.487652,-35.407255000000006,0.0 143.492037,-35.410312,0.0 143.496612,-35.413178,0.0 143.501366,-35.415844,0.0 143.506285,-35.418304,0.0 143.511355,-35.42055,0.0 143.516563,-35.422577,0.0 143.521894,-35.424378999999995,0.0 143.527334,-35.42595,0.0 143.532867,-35.427287,0.0 143.538479,-35.428386,0.0 143.544154,-35.429244,0.0 143.549876,-35.429859,0.0 143.55563,-35.430228,0.0 143.5614,-35.430352,0.0 143.56717,-35.430228,0.0 143.572924,-35.429859,0.0 143.578646,-35.429244,0.0 143.584321,-35.428386,0.0 143.589933,-35.427287,0.0 143.595466,-35.42595,0.0 143.600906,-35.424379,0.0 143.606237,-35.422577,0.0 143.611445,-35.42055,0.0 143.616515,-35.418304000000006,0.0 143.621434,-35.41584400000001,0.0 143.626188,-35.413178,0.0 143.630763,-35.410312,0.0 143.635148,-35.407255000000006,0.0 143.639331,-35.404015,0.0 143.643299,-35.400601,0.0 143.647043,-35.397023,0.0 143.650551,-35.393289,0.0 143.653814,-35.389411,0.0 143.656823,-35.385398,0.0 143.659571,-35.381263000000004,0.0 143.662049,-35.377016000000005,0.0 143.664251,-35.372669,0.0 143.66617,-35.368234,0.0 143.667802,-35.363723,0.0 143.669143,-35.35914900000001,0.0 143.670187,-35.354524,0.0 143.670934,-35.349861000000004,0.0 143.67138,-35.345172,0.0 143.671524,-35.34047000000001,0.0 143.671367,-35.335769000000006,0.0 143.670908,-35.331081,0.0 143.67015,-35.32641900000001,0.0 143.669093,-35.321795,0.0 143.667741,-35.317223,0.0 143.666098,-35.312715,0.0 143.664169,-35.308284,0.0 143.661958,-35.30394100000001,0.0 143.659472,-35.29969799999999,0.0 143.656717,-35.295567000000005,0.0 143.653702,-35.291559,0.0 143.650434,-35.287686,0.0 143.646923,-35.283957,0.0 143.643177,-35.280383,0.0 143.639208,-35.276975,0.0 143.635027,-35.273740000000004,0.0 143.630644,-35.270688,0.0 143.626071,-35.267828,0.0 143.621322,-35.265166,0.0 143.616409,-35.262710999999996,0.0 143.611346,-35.260469,0.0 143.606146,-35.258447,0.0 143.600824,-35.256649,0.0 143.595394,-35.25508000000001,0.0 143.589872,-35.253746,0.0 143.584271,-35.25264899999999,0.0 143.57860800000003,-35.251793,0.0 143.572898,-35.25118,0.0 143.567157,-35.250811,0.0 143.5614,-35.250688,0.0</coordinates>
</LinearRing>
</outerBoundaryIs>
</Polygon>
</Placemark>
LATER
More weirdness: I imported the kml into Fusion Charts and then exported it. The KML now has the style information before the placemarks, and validates perfectly.
Solution: Put the style information first.
<?xml version='1.0' encoding='UTF-8'?>
<kml xmlns='http://www.opengis.net/kml/2.2'>
<Document>
<name>doc</name>
<Style id='Style2-point-1'>
<IconStyle>
<color>ff0000ff</color>
<scale>1.0</scale>
<Icon>
<href>http://maps.google.com/mapfiles/kml/shapes/placemark_circle.png</href>
</Icon>
</IconStyle>
<LabelStyle>
<scale>0.0</scale>
</LabelStyle>
<BalloonStyle>
<text>$[description]</text>
</BalloonStyle>
</Style>
<Style id='Style2-point-1-hover'>
<IconStyle>
<color>ff0000ff</color>
<scale>1.0</scale>
<Icon>
<href>http://maps.google.com/mapfiles/kml/shapes/placemark_circle.png</href>
</Icon>
</IconStyle>
<BalloonStyle>
<text>$[description]</text>
</BalloonStyle>
</Style>
<StyleMap id='Style2-point-1-map'>
<Pair>
<key>normal</key>
<styleUrl>#Style2-point-1</styleUrl>
</Pair>
<Pair>
<key>highlight</key>
<styleUrl>#Style2-point-1-hover</styleUrl>
</Pair>
</StyleMap>
<Placemark>
<name>LPVGDatumLutID {11}- Canberra</name>
<snippet/>
<description>
<![CDATA[<div class="googft-info-window">
<b>description:</b> Log Provider [10] Google Analytics V3<br>
<b>name:</b> LPVGDatumLutID {11}- Canberra
</div>]]></description>
<styleUrl>#Style2-polygon-3-map</styleUrl>
<ExtendedData/>
<Polygon>
<outerBoundaryIs>
<LinearRing>
<coordinates>148.836481,-35.026301,0.0 148.833751,-35.028007,0.0 148.816238,-35.040183,0.0 148.799522,-35.053091,0.0 148.783649,-35.066695,0.0 148.768662,-35.080959,0.0 148.754603,-35.095843,0.0 148.74151,-35.111308,0.0 148.729419,-35.127311,0.0 148.718365,-35.143808,0.0 148.708377,-35.160755,0.0 148.699483,-35.178105,0.0 148.691709,-35.195812,0.0 148.685076,-35.213826,0.0 148.679604,-35.2321,0.0 148.675308,-35.250581,0.0 148.672201,-35.269222,0.0 148.670291,-35.287969,0.0 148.669585,-35.306772,0.0 148.670086,-35.32558,0.0 148.671794,-35.34434,0.0 148.674704,-35.363002,0.0 148.678809,-35.381513,0.0 148.684099,-35.399824,0.0 148.69056,-35.417884,0.0 148.698174,-35.435644,0.0 148.706923,-35.453053,0.0 148.716782,-35.470065,0.0 148.727726,-35.486632,0.0 148.739723,-35.502709,0.0 148.752743,-35.518252,0.0 148.766749,-35.533217,0.0 148.781704,-35.547563,0.0 148.797566,-35.561251,0.0 148.814293,-35.574242,0.0 148.831838,-35.586501,0.0 148.850153,-35.597994,0.0 148.869187,-35.608688,0.0 148.888889,-35.618555,0.0 148.909204,-35.627566,0.0 148.930075,-35.635698,0.0 148.951446,-35.642927,0.0 148.973256,-35.649233,0.0 148.995445,-35.654599,0.0 149.017952,-35.659009,0.0 149.040715,-35.662453,0.0 149.063669,-35.664919,0.0 149.086753,-35.666401,0.0 149.104176,-35.666774,0.0 149.1099,-35.666896,0.0 149.133047,-35.666401,0.0 149.156131,-35.664919,0.0 149.179085,-35.662453,0.0 149.201848,-35.659009,0.0 149.224355,-35.654599,0.0 149.246544,-35.649233,0.0 149.268354,-35.642927,0.0 149.289725,-35.635698,0.0 149.310596,-35.627566,0.0 149.330911,-35.618555,0.0 149.350613,-35.608688,0.0 149.369647,-35.597994,0.0 149.387962,-35.586501,0.0 149.405507,-35.574242,0.0 149.422234,-35.561251,0.0 149.438096,-35.547563,0.0 149.453051,-35.533217,0.0 149.467057,-35.518252,0.0 149.480077,-35.502709,0.0 149.492074,-35.486632,0.0 149.503018,-35.470065,0.0 149.512877,-35.453053,0.0 149.521626,-35.435644,0.0 149.52924,-35.417884,0.0 149.535701,-35.399824,0.0 149.540991,-35.381513,0.0 149.545096,-35.363002,0.0 149.548006,-35.34434,0.0 149.549714,-35.32558,0.0 149.550215,-35.306772,0.0 149.549509,-35.287969,0.0 149.547599,-35.269222,0.0 149.544492,-35.250581,0.0 149.540196,-35.2321,0.0 149.537488,-35.223056,0.0 149.534724,-35.213826,0.0 149.528091,-35.195812,0.0 149.520317,-35.178105,0.0 149.511423,-35.160755,0.0 149.501435,-35.143808,0.0 149.490381,-35.127311,0.0 149.47829,-35.111308,0.0 149.465197,-35.095843,0.0 149.451138,-35.080959,0.0 149.436151,-35.066695,0.0 149.420278,-35.053091,0.0 149.403562,-35.040183,0.0 149.386049,-35.028007,0.0 149.367787,-35.016595,0.0 149.348826,-35.005979,0.0 149.329217,-34.996186,0.0 149.309014,-34.987245,0.0 149.288271,-34.979178,0.0 149.267046,-34.972008,0.0 149.245395,-34.965755,0.0 149.223377,-34.960435,0.0 149.201052,-34.956062,0.0 149.178481,-34.952648,0.0 149.155724,-34.950204,0.0 149.132843,-34.948734,0.0 149.1099,-34.948244,0.0 149.104176,-34.948367,0.0 149.086957,-34.948734,0.0 149.064076,-34.950204,0.0 149.041319,-34.952648,0.0 149.018748,-34.956062,0.0 148.996423,-34.960435,0.0 148.974405,-34.965755,0.0 148.952754,-34.972008,0.0 148.931529,-34.979178,0.0 148.910786,-34.987245,0.0 148.890583,-34.996186,0.0 148.870974,-35.005979,0.0 148.852013,-35.016595,0.0 148.836481,-35.026301,0.0</coordinates>
</LinearRing>
</outerBoundaryIs>
</Polygon>
</Placemark>
</Document>
</kml>
Related
I have a custom Xcode 13.2.1 (13C100) Instrument to which I have recently added os-signpost-point-schema. I notice that the events are marked with a hyphen/dash rather than a ⓢ. See the comparison of my custom tool vs the standard “Points of Interest” tool:
I have been digging through the documentation and while I wager that there is some simple attribute that can be set to dictate which symbol is included within the signpost ⃝, it is not jumping out at me. How does one select the symbol used within custom event points in Instruments?
Here is the code for the instrument:
<?xml version="1.0" encoding="UTF-8" ?>
<!-- Instruments Developer Help: https://help.apple.com/instruments/developer/mac/current/ -->
<package>
<id>com.robertmryan.CustomInterval</id>
<version>0.2</version>
<title>Custom Points of Interest</title>
<owner>
<name>Robert Ryan</name>
</owner>
<import-schema>os-signpost</import-schema>
<!-- See https://help.apple.com/instruments/developer/mac/current/#/dev536412616 -->
<os-signpost-point-schema>
<id>custom-point-schema</id>
<title>Points</title>
<owner>
<name>Robert Ryan</name>
</owner>
<purpose>Provide mechanism for multicolored events posted by `os_signpost`; The string generated by `os_signpost` must be in form of "Label:%d,Concept:%{public}#", where "Label" is string that will control what text appears in the event, and "Concept" is one of the strings listed in https://help.apple.com/instruments/developer/mac/current/#/dev66257045 that dictates the color of the interval. No spaces after the commas within this string.</purpose>
<note>That message must use that printf-style format, not embedding the values in the format string literal.</note>
<!-- you can constrain this to a particular subsystem if you'd like:
<subsystem>"com.domain.MyApp"</subsystem>
-->
<category>"Interval"</category>
<name>?name</name>
<pattern>
<message>"Label:" ?label ",Concept:" ?concept</message>
</pattern>
<column>
<mnemonic>name</mnemonic>
<title>Name</title>
<type>string</type>
<expression>?name</expression>
</column>
<column>
<mnemonic>label</mnemonic>
<title>Label</title>
<type>string</type>
<expression>?label</expression>
</column>
<column>
<mnemonic>concept</mnemonic>
<title>Concept</title>
<type>event-concept</type>
<expression>?concept</expression>
</column>
</os-signpost-point-schema>
<os-signpost-interval-schema>
<id>custom-interval-schema</id>
<title>Intervals</title>
<owner>
<name>Robert Ryan</name>
</owner>
<purpose>Provide mechanism for multicolored intervals posted by `os_signpost`; The string generated by `os_signpost` must be in form of "Label:%d,Concept:%{public}#", where "Label" is string that will control what text appears in the interval, and "Concept" is one of the strings listed in https://help.apple.com/instruments/developer/mac/current/#/dev66257045 that dictates the color of the interval. No spaces after the commas within this string.</purpose>
<note>That message must use that printf-style format, not embedding the values in the format string literal.</note>
<!-- you can constrain this to a particular subsystem if you'd like:
<subsystem>"com.domain.MyApp"</subsystem>
-->
<category>"Interval"</category>
<name>?name</name>
<start-pattern>
<message>"Label:" ?label ",Concept:" ?concept</message>
</start-pattern>
<column>
<mnemonic>name</mnemonic>
<title>Name</title>
<type>string</type>
<expression>?name</expression>
</column>
<column>
<mnemonic>label</mnemonic>
<title>Label</title>
<type>string</type>
<expression>?label</expression>
</column>
<column>
<mnemonic>concept</mnemonic>
<title>Concept</title>
<type>event-concept</type>
<expression>?concept</expression>
</column>
</os-signpost-interval-schema>
<instrument>
<id>com.robertmryan.CustomInterval.instrument</id>
<title>Custom Points of Interest</title>
<category>Behavior</category>
<purpose>Provide multi-colored intervals as dictated by the "event-concept" parsed from the `start-pattern` string.</purpose>
<icon>Generic</icon>
<limitations></limitations>
<create-table>
<id>custom-interval-table</id>
<schema-ref>custom-interval-schema</schema-ref>
</create-table>
<create-table>
<id>custom-point-table</id>
<schema-ref>custom-point-schema</schema-ref>
</create-table>
<graph>
<title>Custom Interval Graph</title>
<lane>
<title>Points</title>
<table-ref>custom-point-table</table-ref>
<plot-template>
<instance-by>name</instance-by>
<label-format>%s</label-format>
<value-from>name</value-from>
<color-from>concept</color-from>
<label-from>label</label-from>
</plot-template>
</lane>
<lane>
<title>Intervals</title>
<table-ref>custom-interval-table</table-ref>
<plot-template>
<instance-by>name</instance-by>
<label-format>%s</label-format>
<value-from>name</value-from>
<color-from>concept</color-from>
<label-from>label</label-from>
<qualified-by>layout-qualifier</qualified-by>
</plot-template>
</lane>
</graph>
<list>
<title>Custom Regions of Interest</title>
<table-ref>custom-interval-table</table-ref>
<column>name</column>
<column>label</column>
<column>concept</column>
<column>start</column>
<column>duration</column>
</list>
<list>
<title>Custom Points of Interest</title>
<table-ref>custom-point-table</table-ref>
<column>name</column>
<column>label</column>
<column>concept</column>
</list>
</instrument>
</package>
I posted this on the Apple forums, too, and received this answer:
… To customize the icon that is set in the point rendering scenario, your type that is selected in your value-from field needs to have a "Special Value Treatment" defined. In your case, instead of using name, you could safely use event-concept.
The mapping between Value -> (Icon, Color) can be found in the etype documentation. For event concept, that would be: https://help.apple.com/instruments/developer/mac/current/#/dev66257045
Please let me know if that helps!
Kacper
Posted 57 minutes ago by kacperh_
In short, the event-concept can control both the color and the symbol for the event, too.
So, I replaced the value-from in the points lane to use the parsed event-concept string, just like the color-from was doing:
<lane>
<title>Points</title>
<table-ref>custom-point-table</table-ref>
<plot-template>
<instance-by>name</instance-by>
<label-format>%s</label-format>
<value-from>concept</value-from>
<color-from>concept</color-from>
<label-from>label</label-from>
</plot-template>
</lane>
And that yielded:
I have tried to validate my XML against XSD by following way.
<?php
$xml= new DOMDocument;
$xml->load(xml path);
if ($xml->schemaValidate(xsd path)) {print "valid.\n";} else {print "invalid.\n";}
?>
It gives me following error
DOMDocument::schemaValidate(): Element '{http://www.w3.org/2001/XMLSchema}attribute': The content is not valid. Expected is (annotation?).
To see the error detail I add the libxml_use_internal_errors(true); in validation code as you can see below.
<?php
libxml_use_internal_errors(true);
$xml= new DOMDocument;
$xml->load(xml path);
if ($xml->schemaValidate(xsd path)) {print "valid.\n";} else {print "invalid.\n";}
?>
After adding this I got following warning
Severity: Warning
Message: DOMDocument::schemaValidate(): Invalid Schema
I validated this xml online against my xsd and it is valid.However, in my php code it gives me error and I google these errors and it says the document could be invalid while I am sure the document is correct as I have validated it online. I am bit new in this so may be there is some mistake I am doing in validation code but unable to see.
Here is XML
<Application xmlns="NextGenMALI-Schema" Type="NewApplication">
<Identifier>1584928194</Identifier>
<SalesChannel SalesChannelType="Broker">
<Identifier>I12345</Identifier>
<CompanyName BusinessName="National Finance and Loans"/>
<PersonName>
<NameTitle Value="Mr"/>
<FirstName>Jonson</FirstName>
<Surname>Jonson</Surname>
</PersonName>
<RelatedEntityRef Type="crm_id">abc#yahoo.com</RelatedEntityRef>
<Email>abc#yahoo.com</Email>
</SalesChannel>
<SalesChannel SalesChannelDescription="BDM">
<Identifier/>
<PersonName>
<Surname/>
</PersonName>
</SalesChannel>
<Comment>Test comments.</Comment>
<PartySegment>
<Party Type="Applicant" PrimaryApplicant="Yes">
<Identifier>4</Identifier>
<Privacy AllowCreditCheck="Yes" AllowDirectMarketing="No" SignatureVerification="No" PointVerificationCompleted="No" ExistingCustomer="Yes" AllowThirdPartyDisclosure="Yes">
<PointVerification DocumentType="DriversLicenceAust" DocumentNumber="12345" NameOnDocument="Josie Ann Test" VersionSighted="Original" VerificationCategory="Primary" Photographic="Yes" NameVerified="Yes" AddressVerified="Yes" SignatureVerified="Yes" DOBVerified="Yes">
<PlaceOfIssue>
<City>NSW</City>
</PlaceOfIssue>
<EndDate>2014-11-28</EndDate>
</PointVerification>
<DocumentsSightedBy LoanWriter="No"/>
</Privacy>
<ResponsibleLend/>
<Person FirstHomeBuyer="Yes" CustomerOfLender="Yes" EmployeeOfLender="Yes" Director="No" PreviousName="Jones" Sex="Female">
<PersonName>
<NameTitle Value="Mr"/>
<FirstName>First Name</FirstName>
<OtherName>Middle Name</OtherName>
<Surname>Surname</Surname>
</PersonName>
<DateOfBirth>1993-02-01</DateOfBirth>
<MaritalStatus Status="Single" OtherDescription=""/>
<Dependent Age="2"/><Dependent Age="4"/>
<MothersMaidenName>Mother Maiden Name</MothersMaidenName>
<Residency PermanentInAustralia="Yes" Status="Citizen">
<Country ISO3166="AU"/>
</Residency>
<ContactDetails>
<AddressDetails Residential="Yes" Mailing="No" PriorAddress="No" PostSettlement="No" HousingStatus="Boarding">
<RelatedEntityRef>45e7815c217b8a</RelatedEntityRef>
<StartAndEndDates><StartDate>2019-04-04</StartDate></StartAndEndDates>
</AddressDetails><AddressDetails Residential="No" Mailing="No" PriorAddress="No" PostSettlement="No" HousingStatus="Caravan">
<RelatedEntityRef>45e7815c217ba4</RelatedEntityRef>
<StartAndEndDates><StartDate>2017-02-02</StartDate><EndDate>2017-02-02</EndDate></StartAndEndDates>
</AddressDetails><AddressDetails Residential="No" Mailing="No" PriorAddress="No" PostSettlement="No" HousingStatus="Renting">
<RelatedEntityRef>45e7815c217bac</RelatedEntityRef>
<StartAndEndDates><StartDate>2015-03-01</StartDate><EndDate>2015-03-01</EndDate></StartAndEndDates>
</AddressDetails>
<Email PreferredContactMethod="Yes">asd#yahoo.com</Email>
</ContactDetails>
<Employment OnProbation="No" PrimaryEmployment="Yes" PriorEmployment="No" Role="1112-11" RoleDescription="General Manager">
<PAYE Type="FullTime">
<RelatedEntityRef Type="RelatedParty">1097796810218</RelatedEntityRef>
</PAYE>
<StartAndEndDates>
<StartDate>2005-01-01</StartDate>
</StartAndEndDates>
<EmploymentIncome>
<ValueItem Value="10000">
<Identifier>IDARAHXC-Income</Identifier>
<Income Type="OtherIncome">
<Period Unit="Monthly">
<StartDate>2013-07-01</StartDate>
<EndDate>2014-06-30</EndDate>
</Period>
</Income>
</ValueItem>
</EmploymentIncome>
</Employment>
</Person>
</Party>
</PartySegment>
<AddressSegment>
<AddressWrapper>
<Identifier>45e7815c217b8a</Identifier>
<Address>
<StreetNo>8</StreetNo><Street Type="Street">Street</Street><City>Melbourne</City><State Name="VIC"/><Postcode>3000</Postcode>
<Country ISO3166="AU"/>
</Address>
</AddressWrapper>
<AddressWrapper>
<Identifier>45e7815c217ba4</Identifier>
<Address>
<StreetNo>4</StreetNo><Street Type="Street">Street</Street><City>Melville</City><State Name="WA"/><Postcode>6153</Postcode>
<Country ISO3166="AU"/>
</Address>
</AddressWrapper>
<AddressWrapper>
<Identifier>45e7815c217bac</Identifier>
<Address>
<StreetNo>7</StreetNo><Street Type="Street">Street</Street><City>Shire of Mornington Peninsula</City><State Name="VIC"/><Postcode>3941</Postcode>
<Country ISO3166="AU"/>
</Address>
</AddressWrapper>
</AddressSegment>
<FinancialSegment NoOtherAssets="No" NoLiabilities="No" NoIncome="No">
<ValueItem Value="41000">
<Identifier>1097796822609</Identifier>
<OwnedByAllApplicants/>
<Asset Class="CurrentSecurity" SecurityType="RegisteredMortgage">
<RealEstate Transaction="Purchasing" PrimarySecurity="Yes" PropertyPrimaryPurpose="OwnerOccupied" ApprovalInPrinciple="No" Status="Established" Holding="Sole">
<Residential WillOwn3UnitsInComplex="No" WillOwn25PercentOfComplex="No" OffThePlan="No" Type="FullyDetachedHouse"/>
<EstimatedValue>41000</EstimatedValue>
<ContractPrice LicencedRealEstateAgentContract="No" ContractPriceAmount="41000"/>
<VisitContact Type="Customer"/>
<Location>
<RelatedEntityRef>1415066564285</RelatedEntityRef>
<Title TitleType="Torrens" TenureType="Freehold"/>
</Location>
</RealEstate>
</Asset>
</ValueItem>
</FinancialSegment>
<RelatedPartySegment>
<RelatedParty RelPartyType="Lender">
<Identifier>1097796817156</Identifier>
<CompanyName BusinessName="AMP"/>
</RelatedParty>
</RelatedPartySegment>
<LoanDetailSegment>
<LoanDetails>
<Identifier>1097796802265</Identifier>
<EstimatedSettlement>2014-11-28</EstimatedSettlement>
<LoanPurpose PrimaryPurpose="OwnerOccupied" OwnerBuilderApplication="No">
<LendingPurposeCode ABSCode="ABS-125" PurposeAmount="0.0" Description="Affinity Fixed Rate, 1 Year (Investment)"/>
</LoanPurpose>
<LoanPortion ProductName="Affinity Fixed Rate, 1 Year (Investment)" ProductCode="AFFR1I" StatementCycle="Monthly" PackageName="">
<Identifier>1097796802265-1</Identifier>
<LoanTerm Units="Years" Type="TotalTerm">30</LoanTerm>
<LoanTerm Units="Years" Type="Variable" PaymentType="PrincipalAndInterest"/>
<AmountRequested Amount="41315" BaseAmount="41315"/>
<PaymentPeriod Payments="0.0">
<Period Unit="Monthly"/>
</PaymentPeriod>
</LoanPortion>
</LoanDetails>
<Representation Self="No">
<NominatedRepresentation>
<RelatedEntityRef>1415066458059</RelatedEntityRef>
</NominatedRepresentation>
</Representation>
</LoanDetailSegment>
<CrossSellSegment Enabled="true"/>
</Application>
<!-- NGPH: 237119.297 -->
Please find XSD here (Word limit exceeds so I had to upload it to share with you)
https://easyupload.io/qifnk1
password: myxsd
this is the xml file:
<?xml version="1.0" encoding="UTF-8"?>
<SOAP-ENV:Envelope SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/">
<SOAP-ENV:Body>
<ns1:putResponse
xmlns:ns1="urn:DmsManagerClient">
<result xsi:type="xsd:string">
<?xml version="1.0" encoding="ISO-8859-1"?>
<MESSAGE ID="11c73b9e-687c-4300-baba-b743c26f7c83" TYPE="CUSDMS">
<DELIVERY>
<FROM>
<SENDER>0072000</SENDER>
<SERVICE>eService</SERVICE>
<DATE>2019-03-08T12:27:25</DATE>
</FROM>
<TO>
<DEALER DEALERCODE="0072000" MARKETCODE="1000"/>
</TO>
</DELIVERY>
<CONTENT>
<dms:ComplexResponse ErrorCode="430" ErrorDescription="null : PrivacyUE Mancante" Return="false"
xmlns:dms="http://dmsmanagerservice">
<dms:Element Name="DMSVERSION">2.7</dms:Element>
</dms:ComplexResponse>
</CONTENT>
</MESSAGE>
</result>
</ns1:putResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I am coding with Ruby and I used Nokogiri and the method xpath to extrapole the "CONTENT" of the file
this is the code:
def extrapolate_error(xml)
doc = Nokogiri::XML(File.open(xml))
doc.xpath('//CONTENT')
end
and this is the result:
[#<Nokogiri::XML::Element:0x1c5ba78 name="CONTENT" children=[
#<Nokogiri::XML::Text:0x1c5b940 "\n">,
#<Nokogiri::XML::Element:0x1c5b8bc name="ComplexResponse" namespace=#<Nokogiri::XML::Namespace:0x1c5b88c prefix="dms" href="http://dmsmanagerservice">
attributes=[
#<Nokogiri::XML::Attr:0x1c5b874 name="ErrorCode" value="430">,
#<Nokogiri::XML::Attr:0x1c5b868 name="ErrorDescription" value="null : PrivacyUE Mancante">,
#<Nokogiri::XML::Attr:0x1c5b85c name="Return" value="false">]
children=[#<Nokogiri::XML::Text:0x1c5b118 "\n">,
#<Nokogiri::XML::Element:0x1c5b094 name="Element" namespace=#<Nokogiri::XML::Namespace:0x1c5b88c prefix="dms" href="http://dmsmanagerservice">
attributes=[#<Nokogiri::XML::Attr:0x1c5b058 name="Name" value="DMSVERSION">]
children=[#<Nokogiri::XML::Text:0x1c5abe4 "2.7">]>,
#<Nokogiri::XML::Text:0x1c5aaac "\n">]>,
#<Nokogiri::XML::Text:0x1c5a974 "\n">]>]
Now I need to enter in it and select some attributes.
In the specific I need this:
name="ErrorCode" value="430"
name="ErrorDescription" value="null : PrivacyUE Mancante"
I do not know how to procceed. Can you help me?
The following should work for you assuming the dms namespace is always the same
doc.xpath('//CONTENT/dms:ComplexResponse', dms: 'http://dmsmanagerservice')
.xpath('#ErrorCode | #ErrorDescription')
.each_with_object({}) do |e,obj|
obj[e.name] = e.text
end
#=> {"ErrorCode"=>"430", "ErrorDescription"=>"null : PrivacyUE Mancante"}
You already understand how you got to //CONTENT so from there we use dms:ComplexResponse to navigate deeper but since this is namespaced we have to provide the namespace reference e.g. dms: 'http://dmsmanagerservice'.
Then we select the attributes we are interested in #ErrorCode and #ErrorDescription.
In XPath the pipe | means UNION (think AND) so we want to select both.
Then we are just building a Hash using the name as the key and the text as the value.
XPath Cheatsheet - Useful resource if you need additional reference
Update
You asked about conditionals so this is what I would propose
ndoc = Nokogiri::XML(doc)
namespaces = ndoc.collect_namespaces
response = ndoc.xpath("//CONTENT/dms:ComplexResponse", namespaces)
if response.xpath("self::node()[#ErrorCode != '' and #ErrorDescription != '']").any?
response.xpath("#ErrorCode | #ErrorDescription")
.each_with_object({}) do |e,obj|
obj[e.name] = e.text
end
else
response.xpath('dms:Element/#Name | dms:Element/text()',namespaces)
.each_slice(2)
.map {|s| s.map(&:text)}.to_h
end
This checks to see if there is an ErrorCode and and ErrorDescription if so then Hash as originally proposed. If Not then it returns all the dms:Elements as a Hash so {"DMSVERSION"=>"2.7"} in this case Functional Example
I have a XML file which contains multiple XML nodes. I would like to separate two XML notes and store them in separate variables. How would I write this functionality with XQuery? I have added my XML file below. Inside the XML file I have a division root element, Dive and top-song are two child elements. Now I want to read the Dive XML content in one variable and top-song content in another variable. Can any one please help me to sort out this issue?
<?xml version="1.0" encoding="UTF-8"?>
<division>
<Dive ID="2"><!-- I want this node in one variable -->
<DiverFName>Joe</DiverFName>
<DiverLName>Diver</DiverLName>
<Number>2</Number>
<Divedate>1998-03-30</Divedate>
<Country ID="1">Bahamas</Country>
<City ID="2">Freeport</City>
<Place ID="2">
<Site>South Pass</Site>
<Lat>24.865062</Lat>
<Lon>-77.871094</Lon>
</Place>
<Divetime>36.00</Divetime>
<Depth Scale="METRIC">5.48</Depth>
<Buddy IDs="2" Names="Tim Diver" />
<Comments>Great dive, saw 5 Caribbean Reef Sharks. Performed compass navigation skills for Scuba Diver certification.</Comments>
<Water>Salt</Water>
<Entry>Boat</Entry>
<Divetype>Research</Divetype>
<Tanktype>Alu</Tanktype>
<Tanksize>11.43</Tanksize>
<PresS>179.26</PresS>
<PresE>82.73</PresE>
<Gas>Air</Gas>
<Weather>Clear</Weather>
<UWCurrent>Medium Current</UWCurrent>
<MarineLife>
<Animal>
<Type>Nurse Shark</Type>
<Abundance>1</Abundance>
<Size>3 ft</Size>
<Description>Dormant on the bottom, not swimming.</Description>
<Image>
<Filename></Filename>
<Path></Path>
<Caption></Caption>
</Image>
</Animal>
<Animal>
<Type>Blue Tang Surgeonfish</Type>
<Abundance>25+</Abundance>
<Size>4 in</Size>
<Description>Blue with white "scalpel" near base </descreption>
<Image>
<Filename></Filename>
<Path></Path>
<Caption></Caption>
</Image>
</Animal>
</MarineLife>
</Dive>
<top-song><!-- I want this node in another variable -->
<title >Try Again</title>
<artist >Aaliyah</artist>
<weeks last="2008-06-17">
<week>2008-06-17</week>
</weeks>
<album> The
Album</album>
<released>February 29, 20008</released>
<formats>
<format>CD</format>
<format>12 single</format>
</formats>
<recorded>january2012</recorded>
<genres>
<genre>R&B</genre>
</genres>
<lengths>
<length>4:04</length>
</lengths>
<label>Blackground</label>
<writers>
<writer></writer>
<writer></writer>
</writers>
<producers>
<producer></producer>
</producers>
<descr>
<p>hai hello</p>
</descr>
</top-song>
</division>
It's not clear what you're trying to accomplish on a high level, but you can select those elements with some simple XQuery/Xpath:
let $dive := doc('mydoc.xml')/division/Dive
let $top-song := doc('mydoc.xml')/division/top-song
However, just looking at the document it's clear that these two elements are in totally unrelated schemas, and as a general recommendation for MarkLogic, they should probably each be separated before ingestion and inserted as separate documents.
My problem is specifically about some trouble I'm having parsing an Inkscape (XML) file, but it's solution should be applicable to any XML doc, so I feel it's Stackoverflow relevant.
I'm trying to use the Nokogiri CSS selectors to get all the <g> elements that have the attribute inkscape:groupmode="layer". But the colon is causing the error:
Nokogiri::CSS::SyntaxError: unexpected ':' after 'inkscape'
My XML document looks like:
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!-- Created with Inkscape (http://www.inkscape.org/) -->
<svg xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:cc="http://creativecommons.org/ns#" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:svg="http://www.w3.org/2000/svg" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd" xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape" width="744.09448819" height="1052.3622047" id="svg3720" version="1.1" inkscape:version="0.48.1 r9760" sodipodi:docname="test.svg">
<defs id="defs3722">
<inkscape:perspective sodipodi:type="inkscape:persp3d" inkscape:vp_x="0 : 526.18109 : 1" inkscape:vp_y="0 : 1000 : 0" inkscape:vp_z="744.09448 : 526.18109 : 1" inkscape:persp3d-origin="372.04724 : 350.78739 : 1" id="perspective3728"/>
</defs>
<sodipodi:namedview id="base" pagecolor="#ffffff" bordercolor="#666666" borderopacity="1.0" inkscape:pageopacity="0.0" inkscape:pageshadow="2" inkscape:zoom="0.35" inkscape:cx="375" inkscape:cy="634.28571" inkscape:document-units="px" inkscape:current-layer="g2818" showgrid="false" inkscape:window-width="550" inkscape:window-height="483" inkscape:window-x="66" inkscape:window-y="471" inkscape:window-maximized="0"/>
<metadata id="metadata3725">
<rdf:RDF>
<cc:Work rdf:about="">
<dc:format>image/svg+xml</dc:format>
<dc:type rdf:resource="http://purl.org/dc/dcmitype/StillImage"/>
<dc:title/>
</cc:Work>
</rdf:RDF>
</metadata>
<g inkscape:label="Layer 1" inkscape:groupmode="layer" id="layer1">
<rect style="fill:#d2e149;fill-opacity:1;stroke:none" id="rect2812" width="211.42857" height="128.57143" x="168.57143" y="215.21933" ry="64.285713"/>
</g>
<g inkscape:label="Layer 1 copy copy" inkscape:groupmode="layer" id="g2818">
<rect style="fill:#d2e149;fill-opacity:1;stroke:none" id="rect2820" width="211.42857" height="128.57143" x="145.71428" y="615.2193" ry="64.285713"/>
</g>
</svg>
My selector looks like:
nokogiri_document.css('[inkscape:groupmode="layer"]').to_html
I also tried replacing the colon with a pipe
How do I write the CSS selector to work on the inkscape:groupmode attribute...or for that matter any foo:bar attribute?
Use XPath, specifying the namespace for the g elements. Since your root element declares the xmlns:svg to be the same as the new default namespace (xmlns) you can use svg as your prefix:
require 'nokogiri'
doc = Nokogiri.XML(IO.read('contents.xml'))
layers = doc.xpath('//svg:g[#inkscape:groupmode="layer"]')
p layers.map{ |layer| layer['id'] }
#=> ["layer1", "g2818"]
Decoded, the above XPath says:
// - At any level of the document
svg:g - …find g elements with a namespace matching the svg namespace
[…] - …but only if the contents of this are met
#inkscape:groupmode - …there is an attribute (#) named groupmode with a namespace matching inkscape
="layer" - and the intrinsic value of this attribute is the text layer.
Alternatively, if you're just trying to read this file (and not manipulate and re-save it) you can use the gross-but-simplifying hack of removing all namespaces. In this case, your original code works simply:
doc.remove_namespaces!
p doc.css('g[groupmode="layer"]').map{ |g| g['id'] }
#=> ["layer1", "g2818"]
I suggest that you try to use XPath. Look at this snippet:
require 'nokogiri'
doc = Nokogiri::XML(File.read('your_file.xml'))
doc.xpath('//xmlns:g[starts-with(#inkscape:label, "Layer")]').size # => 2
Please pay attention at xmlns in XPath expression. Because XPath query looks for elements that are not in any namespace, you need to tell your XPath processor that you are looking for elements in given namespace. You can do this by several ways. I use most simple case - the using the default namespace in XPath query. Also you can define a custom namespace in the second argument of the XPath method call and use that in the query.