I have installed rpm from this site 1- Zabbix 2.4 download page for centos7
And I have been following installation instructions on this site 2- Zabbix.org centos installation instructions
first, I configure zabbix repository
rpm -ivh http://repo.zabbix.com/zabbix/2.4/rhel/6/x86_64/zabbix-release-2.4-1.el6.noarch.rpm
But, then I realized this repository is for /rhel/6. Then I run the command below to change the zabbix repository which is for /rhel/7 , since I use centos 7.
rpm --import http://repo.zabbix.com/RPM-GPG-KEY-ZABBIX
rpm -Uv http://repo.zabbix.com/zabbix/2.4/rhel/7/x86_64/zabbix-release-2.4-1.el7.noarch.rpm
Then, I try to install zabbix
yum install mysql-server zabbix-server-mysql zabbix-web-mysql zabbix-agent zabbix-java-gateway
But I couldn't because of some dependency could not be installed.
--> Finished Dependency Resolution
Error: Package: zabbix-server-mysql-2.4.5-1.el6.x86_64 (zabbix)
Requires: libmysqlclient.so.16()(64bit)
Error: Package: zabbix-server-mysql-2.4.5-1.el6.x86_64 (zabbix)
Requires: libmysqlclient.so.16(libmysqlclient_16)(64bit)
Error: Package: zabbix-server-mysql-2.4.5-1.el6.x86_64 (zabbix)
Requires: libnetsnmp.so.20()(64bit)
Error: Package: iksemel-1.4-2.el6.x86_64 (zabbix-non-supported)
Requires: libgnutls.so.26()(64bit)
Error: Package: iksemel-1.4-2.el6.x86_64 (zabbix-non-supported)
Requires: libgnutls.so.26(GNUTLS_1_4)(64bit)
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
I have searched a bit and I have came accross a lot of people has same problem and you can find some offered solutions to the problem. I have tried to implement the offered solutions but non of them solved the problem.
3.1- Offered solution from centos.org/forum : I could not understand this, I run the commands and result are shown below.
rpm -qR postfix
libmysqlclient.so.18()(64bit)
libmysqlclient.so.18(libmysqlclient_18)(64bit)
rpm -q mysql-libs
package mysql-libs is not installed
3.2- Offered solution from centos.org/forum This problem seems very similar but it does not helped either
3.3- Offered solution from zabbix.com/forum This problem seems exactly same, and a solution is offered. But I could not understand it.
Also, I found that on Zabbix official documentation 4- Zabbix 2.4 manual
Supported for versions: RHEL6, CentOS 6
centos 7 is not listed here, but it contradicts with Zabbix download page, since they provide a link for centos 7. you can check first link.
Please share if you have any idea how to solve this problem.
As #Jan Garaj pointed, the problem was yum try to install el6 packages, although I have changed the zabbix repository which is for rhel/7.
So, I have just cleaned the cache with the commands below and problem is resolved.
yum clean headers
yum clean packages
yum clean metadata
You can find more information about cleaning yum caches on this site:
Centos/clearing yum caches
You can find information about removing a yum repository on tihs site, Just cleaning cache solves this problem, so I did not try to remove yum repository. But, it can be useful if cleaning cache does not help.
serverFault/how to remove yum repo
I had similar problem while installing nginx. For me what helped was continuous release repository CR
Usage:
yum -y install yum-utils
yum-config-manager --enable cr
Related
I am using CentOS7 and PostgreSQL-13. As it is very difficult to work database-related queries in the command line I want to install pgadmin3. Aas it is available on the yum repository and in my CentOS, I do not have any internet connection. So I have installed pgadmin3 with the following installation command only: yum install pgadmin3.
I have seen in some tutorials they modified the sudo /usr/pgadmin4/bin/setup-web.sh file. But I did not find such a file in my CentOS machine after pgadmin3 installation. Now I have no idea how to configure it with my already installed PostgreSQL-13 and httpd and how I can use this. I have not found any documentation regarding this.
PostgreSQL-13 not supported for pgadmin3, you must install pgadmin4
I am trying to install a memory profiler (https://github.com/arnaud-lb/php-memory-profiler) on my EC2 instance (LAMP stack runnign php 7.2) as we are running in to memory allocation errors. During the installation, I get the following error:
checking for judy lib... yes, shared
checking for judy files in default path... not found
configure: error: Please reinstall the judy distribution
ERROR: `/tmp/pear/install/memprof/configure --with-php-config=/usr/bin/php-config' failed
For the life of me, I cannot figure out how to reinstall the judy library. I've tried both pecl (No releases available for package "pecl.php.net/libjudy") and yum (No package libjudy available.)
I've searched for ways to install it and have come up empty.
Anyone have any advice?
Thanks in advance.
p.s. I have also asked this question of the memory profile developer.
try the following repository
Download latest rpmforge-release rpm from
wget https://ftp.tu-chemnitz.de/pub/linux/dag/redhat/el7/en/x86_64/rpmforge/RPMS/rpmforge-release-0.5.3-1.el7.rf.x86_64.rpm
Install rpmforge-release rpm:
# rpm -Uvh rpmforge-release*rpm
Install judy rpm package:
# yum install judy judy-devel
I am trying to download/install php7.2 on Debian which is installed on my WSL (Windows Subsystem for Linux), through my company's proxy.
I have been able to download apt packages by using this solution : https://askubuntu.com/questions/89437/how-to-install-packages-with-apt-get-on-a-system-connected-via-proxy
The problem now is that I need ppa from sudo add-apt-repository ppa:ondrej/php cause php > 7.0 is not available anymore with sudo apt-get install and I tried many solutions but no one worked for me. Every solution tested by the asker of https://unix.stackexchange.com/questions/361213/unable-to-add-gpg-key-with-apt-key-behind-a-proxy were tried and the answers too.
So, there is my last obstacle :
$ sudo -E add-apt-repository ppa:ondrej/php
Co-installable PHP versions: PHP 5.6, PHP 7.x and most requested extensions are included. Only
Supported Versions of PHP (http://php.net/supported-versions.php) for Supported Ubuntu Releases
(https://wiki.ubuntu.com/Releases) are provided. Don't ask for end-of-life PHP versions or Ubuntu
release, they won't be provided.
Debian oldstable and stable packages are provided as well: https://deb.sury.org/#debian-dpa
You can get more information about the packages at https://deb.sury.org
BUGS&FEATURES: This PPA now has a issue tracker:
https://deb.sury.org/#bug-reporting
CAVEATS:
1. If you are using php-gearman, you need to add ppa:ondrej/pkg-gearman
2. If you are using apache2, you are advised to add ppa:ondrej/apache2
3. If you are using nginx, you are advise to add ppa:ondrej/nginx-mainline
or ppa:ondrej/nginx
PLEASE READ: If you like my work and want to give me a little motivation, please consider donating
regularly: https://donate.sury.org/
WARNING: add-apt-repository is broken with non-UTF-8 locales, see
https://github.com/oerdnj/deb.sury.org/issues/56 for workaround:
# LC_ALL=C.UTF-8 add-apt-repository ppa:ondrej/php
More info: https://launchpad.net/~ondrej/+archive/ubuntu/php
Press [ENTER] to continue or ctrl-c to cancel adding it
gpg: keybox '/tmp/tmpw9sj_dvp/pubring.gpg' created
gpg: keyserver receive failed: No name
I'm on Fedora 30. I am trying to install "epel-release".
I am following this guide: https://www.phusionpassenger.com/library/install/standalone/install/oss/el7/ -- I am unable to successfully run the command:
$ sudo yum install -y epel-release yum-utils
I get as a result:
No match for argument: epel-release
So, I tried the following commands from this article: https://www.liquidweb.com/kb/enable-epel-repository/
$ cd /tmp
$ wget https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
$ yum install ./epel-release-latest-*.noarch.rpm
No such luck - this is the output:
Error:
Problem: problem with installed package fedora-release-workstation-30-1.noarch
- package epel-release-7-11.noarch conflicts with fedora-release provided by fedora-release-workstation-30-1.noarch
- package epel-release-7-11.noarch conflicts with fedora-release provided by fedora-release-workstation-30-4.noarch
- conflicting requests
I have also tried:
$ sudo dnf install epel-relase
which that didn't work either, here's the results:
No match for argument: epel-release
Error: Unable to find a match
I have come across several different articles basically saying to either use the first command listed or variations of the second command I've tried - all unsuccessful. side note: Is this because Fedora 30 was just "recently" released?
My end goal is to deploy a Ruby on Rails web app internally using Nginx. For that, I am following this guide: https://www.phusionpassenger.com/library/walkthroughs/deploy/ruby/ownserver/nginx/oss/el7/deploy_app.html
Any direction for how to install epel-release would be great as I can't move forward until passenger is installed.
Note that EPEL is not suitable for use in Fedora! Fedora is not Enterprise Linux. EPEL provides "a high quality set of additional packages for Enterprise Linux, including, but not limited to, Red Hat Enterprise Linux (RHEL), CentOS and Scientific Linux (SL), Oracle Linux (OL)". Put simply, Enterprise Linux is a term that refers to Red Hat Enterprise Linux or one of its clones. And Fedora is not a Red Hat clone.
That is why you cannot install the "epel-release" package in Fedora. It simply does not exist. Don't try to use EPEL on Fedora.
As noted before, the Fedora repositories provide most (if not all) of the EPEL packages. Additional software for Fedora is available in the RPMFusion repositories. In their own words, RPMFusion is "an extension of Fedora" that "provides software that the Fedora Project or Red Hat doesn't want to ship." RPMFusion can not be used on Enterprise Linux. You could see RPMFusion as the "EPEL alternative" for Fedora, but be aware that the software collections provided by RPMFusion and EPEL are entirely unrelated and uncomparable.
EPEL is managed from within the Fedora project, and thus part of Red Hat. RPMFusion is an independent organization. You can consider their repositories reliable, but always be cautious when you install software from external sources.
Finally - on a sidenote - on recent Fedora versions, 'dnf' has replaced 'yum'.
Okay, so turns out that this can be simplified to just:
$ sudo dnf install passenger
Crazy that they have an entire tutorial for how to install passenger when it can just be simplified to this one line.
you'll need to install the EPEL (Extra Packages for Enterprise Linux) repository.
The EPEL project is run by the Fedora team.
When you install third-party repositories on Red Hat and CentOS systems.
Install in centos:
sudo yum install yum-plugin-priorities epel-release
When the installation completes, navigate to the /etc/yum.repos.d directory,
and open the CentOS-Base.repo file in your favorite text editor.
After the last line of the base, updates, and extras sections, add the line: priority=1.
After the last line of the centosplus section, add the line:
priority=2.
Save the file and close the editor.
Now, Open the epel.repo file for editing.
After the last line of the epel section,add the line:
priority=10.
After the last line of each remaining section, add the line:
priority=11.
Update the system and then create a list of the installed and available packages by running:
sudo yum upgrade
sudo yum list > yum_list.txt
For RHEL - dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
Try with the above command to install epel-release in RHEL 8
I need to install Ansible Control Machine behind a corporate firewall with no internet access. I can't find documentation for an offline install. I have access on my workstation to download anything I want and can copy it to the target machine. I have tried searching online but have not been able to find examples on how to do this. My server is Ubuntu 14.04 but if anyone has documentation for Red Hat or another distro that would also help.
I did a testing on my RH6, so if you have a RH6 with Internet access to download all required installation file, and a RH6 installation ISO. You should be able to achieve this.
Assuming you have a RH6 which has Internet access, let's call it A. And another one doesn't have access: B.
download Ansible and Jinja2 from A, and copy the files to B.
For Ansible: http://docs.ansible.com/ansible/intro_installation.html
Jinja2 is required for Ansible, download it here:
https://pypi.python.org/pypi/Jinja2
Mount the RH6 installation ISO to your RH6 B, then install the required RPM.
In my case, i installed PIP as well:
rpm -ivh python-paramiko-1.7.5-2.1.el6.noarch.rpm libyaml-0.1.3-4.el6_6.x86_64.rpm PyYAML-3.10-3.1.el6.x86_64.rpm perl-TermReadKey-2.30-13.el6.x86_64.rpm perl-Error-0.17015-4.el6.noarch.rpm python-six-1.9.0-2.el6.noarch.rpm
//following required for Git
rpm -ivh --force --nodeps perl-Git-1.7.1-3.el6_4.1.noarch.rpm
rpm -ivh git-1.7.1-3.el6_4.1.x86_64.rpm
Note: i didn't install httplib2 here, you can do it later.
install MarkupSafe (required for Jinja2)
//install MarkupSafe
tar -xvf MarkupSafe-0.23.tar.gz
cd MarkupSafe-0.23/
sudo python setup.py install
install Jinja2
//install Jinjia2
tar -xvf Jinja2-2.8.tar.gz
cd Jinja2-2.8/
sudo python setup.py install
On RH6 B, you should be able to run Ansible now:
tar -zxvf ansible.tar.gz
source ./hacking/env-setup
echo "127.0.0.1" > ~/ansible_hosts
export ANSIBLE_INVENTORY=~/ansible_hosts
ansible --version
I know this is a very old question, but I've found the answer in this blog post and I believe that could help someone out there.
Although this post aproach is on a CentOS/RHEL machine, I believe the procedure is very similar to other distros:
Download the packages (RPM) dependencies
Download the Ansible packages
Upload the downloaded packages to the target machine
Install it using yum localinstall
Or you could also install it from the source.