Downloaded Vagrant, and went through th installation process.
When I ran vagrant -v it says vagrant: command not found
It has put the files in /opt/vagrant/...
It should install in the Applications folder with a link to the /usr/bin so it is added to the shell path.
There is no directory that has been created during this process.
I am afraid I can't even get started with it. ITs obviously not creating all the shortcuts it needs to be able to run the commands.
I have looked for support on this issue and reported a bug.
I also accepted the xcode licence agreement.
Has anybody else had this issue.
My next step is to manually create the shortcuts.
If you look at the uninstall script including in the Vagrant DMG, it is referring to /usr/local/bin which does not exist. It should be error handling (the Vagrant pkg installer) and create it (permissions/ownership etc) but it doesn't.
You need to mkdir the /usr/local/bin. I tried a symlink between /usr/bin/vagrant (as /usr/bin exists, and in-path) to /opt/vagrant/bin/vagrant BUT this does not work, as later on in life, Vagrant refers in a hard fashion to /usr/local/bin/vagrant because its stupid.
$ sudo mkdir /usr/local/bin
If you sudo it, it should be made with correct ownership etc. Now just re-run the Vagrant installer pkg.
Make sure the Virtual Box setup is installed on Mac before installing Vagrant.
I raised the bug with https://github.com/mitchellh/vagrant/issues/6034
The issue is that I had no /usr/local directory at all.
It is an apple issue.
After I created the directories as you described I was able to install vagrant vitrual boax and laravel.
Here is what I did.
sudo mkdir /usr/local
Then bin.
cd /usr/local
sudo mkdir bin
I uninstalled Vagrant, re-installed and when I ran vagrant -v I then got the version.
cd /usr/local/bin
ls
sudo chmod 755 vagrant
Thanks for your Answer.
Weird, on 1.8.5 I couldn't run Vagrant either, noticed that /usr/local/bin was owned by root. Ran command
# chown -R User:Group /usr/local/bin
as root and works from my username now.
Related
I am having a problem about linuxbrew.
bash: /lustre7/home/lustre4/user1/applications/bin/cut: /lustre7/home/lustre4/user1/.linuxbrew/lib/ld.so: bad ELF interpreter: No such file or directory
I tried to uninstall linuxbrew using instructions at its website, but somehow it didn't work (because of sudo requirements).
there is linuxbrew directory but I can't remove when I type rm -r linuxbrew it says;
-bash: /lustre7/home/lustre4/user1/applications/bin/rm: /lustre7/home/lustre4/user1/.linuxbrew/lib/ld.so: bad ELF interpreter: No such file or directory
When I tried to install homebrew it says your CPU is not supported. (I tried this before and it worked, but now it is not working.)
I want to solve this problem but I couldn't find any solution. I am not able to run sudo and yum commands because I am not root. I am a user at a linux cluster.
OK. I finally was able to solve this issue.
I am wring in case someone else may have the same issue.
First, this was related to a bash problem. I recently installed a tool that put some variables to both bashrc and bash_profile and altered path of bin directory.
I wasn't able to use system commands such as rm, ls, cat etc. and I wasn't able to run system ruby. Paths of all commands and ruby were in my bin directory under my application directory.
What I did is;
I edited my bash_profile by cancelling the new path that caused conflict between bash_profile and bashrc. This enabled me run system commands.
I uninstalled linuxbrew as described in its website.
I removed linuxbrew from my home directory, and cancelled its path in bash_profile (comment out).
I installed homebrew again and put its path to my bashrc.
Now it is working.
I could uninstall linuxbrew using the procedure I described in here:
How to completely uninstall brew and re-install brew in ubuntu 19.04
-> In short, I just replaced install.sh by uninstall.sh and it worked...
$/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/uninstall.sh)"
I was trying to install the postgres through terminal on mac os. I used homebrew to install the postgres.
During the install I got following error
"Error: The brew link step did not complete successfully
The formula built, but is not symlinked into /usr/local
Could not symlink share/man/man3/SPI_connect.3"
I also got error regarding initdb
"initdb: file "/usr/local/share/postgresql/postgres.bki" does not exist
This might mean you have a corrupted installation or identified
the wrong directory with the invocation option -L.
Warning: The post-install step did not complete successfully
You can try again using brew postinstall postgresql"
After the install I am not able to run any of postgres commands. I would really appreciate any help as I am new to postgres. Please, provide little explanation.
Thank You!
Not sure if this solution is the best, but so far this is the only one.
Note: I did this on a macOS environment
I have chowned the directory I wasn't allowed to write. (chown -R user/usr/local/lib/pkgconfig)
/usr/local/lib/pkgconfig` (assumed that dir should be mine anyway - since it's within /usr/local)
I ran
brew link postgres - so the links required are there
Then initdb /usr/local/var/postgres -E utf8 worked perfectly.
Running brew postinstall postgres --debug gives:
Errno::EACCES: Permission denied # dir_s_mkdir - /usr/local/var/postgres
Creating the directory manually and setting the right group worked:
cd /usr/local/var
sudo mkdir postgres
sudo chown <user> postgres
sudo chgrp admin postgres/
I installed MongoDB via Homebrew (following http://docs.mongodb.org/manual/tutorial/install-mongodb-on-os-x/) but it's not working.
Typing mongod at shell prompt gives me:
-bash: mongod: command not found
Not sure if I need to add something for Homebrew to my PATH env var?
I can see Mongo is installed under /usr/local/Cellar/mongodb – but am assuming I don't need to add everything I install via homebrew to the path? Also, assuming I can run mongod from any directory or am I actually meant to be in install directory?
When I run brew doctor I get:
Warning: You have unlinked kegs in your Cellar
Followed by a list of 3 items which includes MongoDB – but I'm not sure how I'm meant to link them?
Works perfectly
brew update
brew tap mongodb/brew
brew install mongodb-community#4.2
For latest version, check https://docs.mongodb.com/manual/release-notes/
You're getting this error because your 'brew' install failed to create the correct symlinks in /usr/local/bin. As a result, the shell can't find the mongo executables in your $PATH. You can fix this using the following steps:
Check the permissions on /usr/local/bin and make sure that you own that directory and have write permissions on it
$ ls -ld /usr/local/bin
Once you've fixed that, run 'brew link' to fix the symlinks
$ brew link mongodb
If you are on mongodb-community#4.0. You can try to reinstall with brew reinstall mongodb-community#4.0.
Then I get the following hint:
==> Caveats
mongodb-community#4.0 is keg-only, which means it was not symlinked into /usr/local,
because this is an alternate version of another formula.
If you need to have mongodb-community#4.0 first in your PATH run:
echo 'export PATH="/usr/local/opt/mongodb-community#4.0/bin:$PATH"' >> ~/.bash_profile
So you can just copy the echo command and restart your shell!
Copied from a different channel running these commands in the terminal updated the installation/configuration issues as described in OP
brew tap mongodb/brew
brew install mongodb-community
brew services start mongodb-community
I faced the same problem and this solution seemed to work for me. I had previously uninstalled mongodb and reinstalled it through homebrew which gave me a bunch of problems. This solution seemed to work just fine.
brew uninstall --force mongodb
brew cleanup -s mongodb
brew cleanup --prune-prefix
brew install mongodb
It works from the directory since the sh searches the ENV path and then the cwd for a program named mongod. I have been looking around a little and it seems that the default install of MongoDB (I am not a Mac user) does not install a rc or init script for which sh to understand it's running behaviour as stated here:
http://docs.mongodb.org/manual/tutorial/install-mongodb-on-os-x/#using-mongodb-from-homebrew-and-macports
The packages installed with Homebrew and MacPorts contain no control
scripts or interaction with the system’s process manager.
If you have configured Homebrew and MacPorts correctly, including
setting your PATH, the MongoDB applications and utilities will be
accessible from the system shell. Start the mongod process in a
terminal (for testing or development) or using a process management
tool.
So you must actually define (as you said) MongoDBs path, here is an example: https://snipt.net/sido/installing-mongodb-on-os-x/
Edit: the example is not mine. I just stole it from it's user: https://snipt.net/sido/
I'm working on the front end for a web app, but I'm trying to learn as much of the backend setup as I can as well. I am setting up redis on a new computer myself, but running into a few hiccups.
The wget command cannot be found, so I assume it Linux only? I am following these instructions to install redis on Mac OS 10.7. I have redis 2.0.0 installed, but while attempting to install 2.4.4 using the same commands, I am told redis-server, redis-cli, redis-benchmark cannot be found, and I can't copy them to /usr/local/bin.
I could not find an update command to bring redis up to the most recent version. I don't think it should be this difficult to install the most recent version on redis on Mac OS, but I can't see what I am doing wrong.
So far as I know, typing:
$ brew upgrade redis
should work, where $ indicates your command line. If it complains about HomeBrew not being installed, you can obtain that here. Brew is an excellent package manager, and a great way of taking care of your files.
If you're not using brew, then these steps will help you get up to date.
First, find the location of your installed redis-server instance before updating. In my case, it was in /usr/local/bin/, but it might also be in /usr/bin/. If it's not here, you can type which redis-server to find the location.
Next, download the redis tar file from https://redis.io/download, then install it from the directory it downloaded to:
cd Downloads
tar xzf redis-X.Y.Z.tar.gz
cd redis-X.Y.Z
make test
make
Next, we'll move the new installed redis to the location where the current instance is running:
sudo mv src/redis-server /usr/local/bin
sudo mv src/redis-cli /usr/local/bin
Now you should be ready to use redis-server and redis-cli in the new version.
PS - I also moved the redis-benchmark, redis-sentinel, redis-check-aof, and redis-check-dump files because they were also already in /usr/local/bin.
Ref: http://jasdeep.ca/2012/05/installing-redis-on-mac-os-x/
It would be better to follow this way.
$ brew update
$brew upgrade redis
Create a bash file...
cd ~
nano .update_redis
Go into the tmp directory and download the latest stable version
cd /tmp
wget http://download.redis.io/redis-stable.tar.gz
Decompress the files
tar xvzf redis-stable.tar.gz
Compile
cd redis-stable
make
Copy the bin programs
cp src/redis-cli /usr/bin/
cp src/redis-server /usr/bin/
cp src/redis-benchmark /usr/bin/
Set Permissions
chmod 755 /usr/bin/redis-cli
chmod 755 /usr/bin/redis-server
chmod 755 /usr/bin/redis-benchmark
Execute
bash .update_redis
I'm having trouble installing RVM on a new Debian 6 VirtualBox VM. I've installed all the needed packages and downloaded the install script fine using
(curl -s https://rvm.beginrescueend.com/install/rvm) > rvm
, but when running it as a single user
bash rvm
I get the following error message:
ERROR: Unable to checkout branch .
Installation stops here, and (as far as I can tell) none of RVM's files are installed.
If I run the script as root (for a multi-user install), I get the other message:
Successfully checked out branch ''
The installer continues and indiciates success, but .rvm directories are not added and even after modifying my .bash_profile(s), I get 'rvm: command not found'.
I'm really stumped here. I don't have a ton of experience in either bash or with git, so I'm not sure if the fact that 'branch' is blank is the problem, or how to continue debugging. I'm here to learn, so please don't hesitate to ask questions so we can figure this out.
Thanks.
I had a /etc/rvmrc lying around that was confusing it. The rvm-installer was trying to install into /usr/local and failing. Deleting it fixed it.
Had the same problem.
Checked for /etc/rvmrc - but did not exist.
Did a ls -al, and found .rvm in my home directory.
Ran rm -rf .rvm
For the syntax error when install rvm on windows.
1. curl -s https://rvm.beginrescueend.com/install/rvm
2. sh rvm
and that did it!
You can try this. (it worked for me)
Set the rvm_path to be user-facing:
appuser$ echo 'rvm_path="$HOME/.rvm"' >> ~/.rvmrc
Now install RVM,
appuser$ curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer -o rvm-installer ; chmod +x rvm-installer ; ./rvm-installer
source :
http://beginrescueend.com/deployment/best-practices/