I'm trying to setup GoLand to use WSL 2 as in this guide: https://www.jetbrains.com/help/go/how-to-use-wsl-development-environment-in-product.html
I've installed Go in the Ubuntu distro following the linux instructions on the GoLang website, and go version prints outs the version I downloaded, so it appears that Go is working inside WSL.
So now I tried to create a new project in GoLand, and I'm getting errors, which appear to come from the fact that the SDK isn't loaded in GoLand. The guide doesn't offer much guidance on this, so I just tried to add a local SDK.
When I select /usr/local/go I get an error that it's not a valid SDK.
So I created the ~/go directory, and then updated my .zshrc file to export the GOPATH and GOROOT environment variables, even though they already showed up when I ran go env, doing this got them to show up on a simple env call.
But I'm still getting the invalid SDK error like above.
Is there a configuration step I'm missing that isn't spelled out in the guide? I came across this old post about creating symlinks to fake the expected directory structure. I haven't done this because it's a really old post, has comments that say this has been fixed, and seems like a really odd solution.
Support for Go SDK in WSL2 will be available in the next 2021.3 release, please see GO-10618.
October 2021 update.
2021.3 reaches Early Access Program at the moment. GoLand suggests selecting Go SDK on WSL2 mount if the location of the project is on WSL2 as well.
I experienced this on my Debian machine and I wasn't using WSL2. I found that the actual cause of the issue is that Goland is unable to read the directory /usr/local/go/bin due to inadequate permission.
A possible solution is to run the goland.sh script as root. The script can be found in the bin/goland.sh directory of the Goland IDE folder. Here is a simple command to do run Goland as the root
export HISTIGNORE='*sudo -S*' && echo "sudo-password-here" | sudo -S /absolute-path-to-goland.sh
export HISTIGNORE='*sudo -S*' tells bash history to ignore caching any command matching sudo -S* to bash history. This way, your sudo-password isn't saved into the bash-history file.
echo "sudo-password-here" | pipes your sudo password as input to the next command.
sudo -S tells bash to read input for password prompt from stdin, which has been provided through the echo command.
Alternatively, you can just install the latest version of Goland. Hopefully, it doesn't come with this bug
I'm trying to install a typo3(v10) extension with composer under XAMPP in the C:\xampp\htdocs\typo3\public\typo3 folder. I'm on Windows 10, I use cmd in admin to install with composer.
With cmd, I accessed my TYPO3 folder using the following command: cd C:\xampp\htdocs\typo3 then I started composer. I typed the command:
composer require typo3/cms-introduction
I get a message that told me the extension is installed. Following the instructions, I must now enter the following commands:
./vendor/bin/typo3 extension: activate bootstrap_package
./vendor/bin/typo3 extension: activate introduction
But cmd returns me the following message (an english translation from the message i get in french)
'.' is not recognized as an internal order or external, an executable
program or a batch file.
How can I activate those 2 extensions?
(De-)Activating TYPO3 extensions is always possible via the extension manager module in the TYPO3 backend.
Side note:
Maybe you want to check out DDEV-local as local development environment instead of XAMPP. DDEV uses Docker and is an awesome powerful tool but easy to use. And it provides a native shell for commands like yours above.
A big plus is the very helpful community. If you have problems, register an account at my.typo3.org, request your TYPO3 Slack invitation and go to the #ddev Slack channel.
This works on Windows:
vendor\bin\typo3 extension:activate <EXTKEY>
Note: You have to solve dependencies manually, but you will be warned and the extension will not be activated if dependencies are absent.
I get this error:
code . is not recognised as an external or internal command, operable program or batch file
moreover shell commands are not coming in my compiler VS code neither do setx path "%path%;C:\Program Files\Microsoft VS Code" is working in command prompt .
It looks as if you do not have the code program installed. You can open the Command Palette,
Mac: ShiftCmdP
Windows/Linux: ShiftCtrlP
And search "install command", which should return this as one of the options:
Shell Command: Install 'code' command in PATH
Run that, and it should install the code command, after which you should be able to use it.
For Mac OS,
You can paste this into your terminal, or in your .bashrc file (or whatever shell config file you are using) :
export PATH="$PATH:/Applications/Visual Studio Code.app/Contents/Resources/app/bin"
I found it. In the "search" type environment variables then click on the "edit system environment variables".
Inside Environment variables->Path put C:\Users\{your_username}\AppData\Local\Programs\Microsoft VS Code\bin.
Go to the project folder and open the cmd with it typing in the location bar and then type code .
That will do.
in windows problem is with insiders version of VSC.
You can use 'code-insiders .' command or make a copy of 'code-insiders.cmd' file as 'code.cmd' inside folder with code-insider (use 'path' command to see where your VSC is installed)
make sure you run the command in C folder
Then click window key + R and type rundll32.exe sysdm.cpl,EditEnvironmentVariables
then enter .
It will open Environment Variables edit Path variable .
Check whether you have C:\Users\{pc name}\AppData\Local\Programs\Microsoft VS Code\bin if not add it and run code -v in C folder cmd
This worked for me !
For Windows OS
For Windows, you'll need to re-install code. You can download the latest version and just install it overtop of your existing install.
During setup, make sure to check the box to Add to PATH
See Also: The VSCode docs on installing the CLI
After installation, you need to restart your computer to make the PATH changes effective. Post restart, the command worked for me.
about linux, if u can't see the >shell option with ctrl+shif+p, You could install via
sudo snap install --classic code
and try again
code .
I am completely new to nodejs. I am trying to get nodejs to work on my Windows 2008 box in order to install Karma which I would use for TDDing my AngularJs code. I have done the following steps so far
Install using Chocolatey ==> npm is not recognised
Install using 64-bit nodejs installer from nodejs.org ==> npm is not recognised
At this stage, running where npm gives me c:\User\<Username>\AppData\Roaming\npm which has nothing in it
I figure out that nodejs is installed in C:\Program Files\nodejs. Opening a command prompt in this directory makes npm work fine.
So I added C:\Program Files\nodejs to PATH only to get the same error again that npm is not recognized
One of the github issues on nodejs repository says that I need to restart the machine and it would fix. But that has not helped so far
I do see a Node.js icon in my Start -> Programms mennu which takes me to nodejs console but not sure what to do with that.
Have I missed any important step in the process?
Edit
I figured out that if I open "Nodejs command prompt" from program files, then npm is recognized. How do I make it work on a normal command prompt?
Edit
After node I started facing a similar problem with another application. I posted this question on superuser and as rightly pointed out by the accepted answer, I had an additional quote in my PATH which was causing issues with all the paths added after the quote. I have a feeling that some Chocolatey install adds this troubling quote but I am just not sure which one.
Just add:
;C:\Program Files\nodejs\
To the end of your Path variable on the "User variable" section of the Environment Variables on the System Properties.
After that, reopen your command prompt and type
npm
This should work.
Don't forget to reboot your computer after installing node! That one got me.
If you are using VS Code, close VS code and open again.
I tried closing Terminal and then opening new Terminal but it didn't work.
Re-Starting VS Code works!
To elaborate on Breno's answer... For Windows 7 these steps worked for me:
Open the Control Panel (Click the Start button, then click Control Panel)
Click User Accounts
Click Change my environment variables
Select PATH and click the Edit... button
At the end of the Variable value, add ;C:\Program Files\nodejs
Click Ok on the "Edit User Variable" window, then click Ok on the "Environment Variables" window
Start a command prompt window (Start button, then type cmd into the search and hit enter)
At the prompt (C:\>) type npm and hit enter; you should now see some help text (Usage: npm <command> etc.) rather than "npm is not recognized..."
Now you can start using npm!
For Windows users: A picture tells a thousand words
Reference: npm not recognized as internal or external command (Note: this is my own blog)
Just Download and Install Node.js from here https://nodejs.org/en/
If you run the downloaded file and install it, they will automatically configure for your system
You don't need any other configurations anymore, now you can use the npm command anywhere
If the Nodejs is successfully installed and still displays the message like this:
'npm' is not recognized as an internal or external command, operable program or batch file.
Follow the steps below for Windows users:
Go to My Computer Properties
Click Advanced System Setting from the Left bar of a window.
Now you have a System Properties window. Click Advanced
Then, Click Environment Variable button
Now you have Environment variable window: From System Variable, Select Path
Click Edit
At the end of the Variable value, add ;C:\Program Files\nodejs\
Note: If you have installed nodejs on other drives then please act accordingly.
Click Ok all the open dialogue box
Very important Note: "Close your Command Prompt And Restart Again"
(It's very important because if you didn't restart your command prompt then changes will not be reflected.)
Now you can use the npm command anywhere
Don't forget to run cmd as admin.
I understand this question is really old and we have many answers, unfortunately, my scenario was different, thus a different solution.
If you started using nvm to manage the node versions after you install the node in your machine, most likely you will be facing the same issue.
I installed a version 10.15.3 and then I had to use another version as there is some tight dependency with one of my projects. Then I decided to install the nvm, while installing it asked, whether I need nvm to manage the version already installed on my machine which is 10.15.3. And yeah, I said Yes hoping that it will take care of that, unfortunately, it didn't.
I was always getting this error no matter I tried many other things mentioned in the other answers here, including setting the path. In the end, to fix that, these are the things I tried.
Uninstall the node version installed, for example, nvm uninstall 10.15.3
Make sure no other node versions are there, nvm list
Then, install the version needed, for example, nvm install 10.15.3. This should give you an output as preceding.
Downloading node.js version 10.15.3 (64-bit)...
Complete
Creating C:\Users\SibeeshVenu\AppData\Roaming\nvm\temp
Downloading npm version 6.4.1... Complete
Installing npm v6.4.1...
Installation complete. If you want to use this version, type
nvm use 10.15.3
PS C:\Users\SibeeshVenu> nvm use 10.15.3
Now using node v10.15.3 (64-bit)
Please note that from the above command, the npm is also installed.
Now use the version you need, nvm use 10.15.3 and type npm
I had the same problem described by Ashu, but in addition to that, the PATH entry for nodejs was terminated by a backslash:
C:\Program Files\nodejs\
I also had to remove that final backslash in order to have it work.
I faced the exact same issue and notice that after installing node.js there was a new path entry in the user variable section for PATH with value --> c:\User\\AppData\Roaming\npm. Also the Path entry in the system variable is appended with --> C:\Program Files\nodejs. Now since user variable has preference over system you have two options to fix this. Either delete the path from user variable or correct the right path (C:\Program Files\nodejs). Restart CMD and it should work.
Set aside all the tips, just run the following line in cmd
> SET PATH=C:\Program Files\Nodejs;%PATH%
If you're getting this error through a service account like Visual Studio TFS Build controller service or any other background service, make sure you restart the service after installing npm as the new PATH environment settings will not be picked up by those already running processes. I was getting same error through my build service but I had npm installed and running in the console.
You might have already received a response but this might help others since I experienced the same issue recently and this is what I did:
Added a path for Powershell. For me, the path was C:\Windows\System32\WindowsPowerShell\v1.0
Then, I opened the command prompt with administrative privileges and ran
#powershell -NoProfile -ExecutionPolicy unrestricted -Command "iex ((new-object net.webclient).DownloadString('https://chocolatey.org/install.ps1'))" && SET PATH=%PATH%;%ALLUSERSPROFILE%\chocolatey\bin
Next, choco install nodejs
Restart and everything worked fine. Try opening the command prompt without admin privileges and run npm -v
Cheers.
Had the same problem on Windows 8.1 64 bit.
Turns out i get that problem if I start cmd by typing it in the path bar at the top of a folder window or when i shift right click in a folder window and then open command prompt from the list.
When I run cmd using Run or Just from the cmd.exe executable it works.
I installed nodejs following this AngularJS tutorial. the npm command did work when I open a new cmd window but not in the current one.
So the fix was to close and open a new cmd window.
If the package is successfully installed and still shows the message "'npm' is not recognized as an internal or external command, operable program or batch file."
Click windows start button.
Look for "ALL APPS", you will see Node.js and Node.js Command prompt there.
You can run the Node.js Command prompt as administrator and soon as its run it will show the message "Your environment has been set up for using Node.js 6.3.0 (x64) and npm."
and then it works from there...
I ran into this issue as well. It turns out Windows doesn't enjoy single quotes on the command line. The culprit was one of my npm scripts. I changed the single quotes to escaped double quotes:
'npm -s run sass-build'
to
\"npm -s run sass-build\"
I'm updating this thread with a new answer because I've found the solution to my miserable situation after not less than a week ...
For those still experiencing the error even though they have their path value set properly, check your pathext variable to have the value (default value in windows 7 +) : .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
Mine was to set only to : .BAT and changing it solved the problem. I wonder why nobody brought this up ...
Hope this helps!
If everything looks fine. I would advice to check this for PATHEXT .CMD must be added.
I don't know why most of user suggesting ; / in the command.
I solved this by removing ; and /
Before
;C:\Program Files\nodejs\
After Solution
C:\Program Files\nodejs
You need to save them into system PATH variables
I ran into this problem the other day on my Windows 7 machine. Problem wasn't my path, but I had to use escaped forward slashes instead of backslashes like this:
"scripts": {
"script": ".\\bin\\script.sh"
}
Step 1: install NodeJs
step 2: Set environment path
Step 3: Restart PC once
I installed Node.js and while trying to install Ionic and cordova using this piece of code:
npm install -g cordova ionic
I faced the above error. I added 'C:\Program Files\nodejs' to my Environment Variable 'PATH'. But still was unable to get over this issue. Turned out that my PATH variable was longer than 2048 characters and so I was unable to add the Nodejs path to it. I had to remove the path of another program and add the Nodejs path.
Close and reopen the cmd prompt and try to install Ionic again.
This worked for me.
for me adding path to PATH didn't do the trick.
Run c:\Program Files\nodejs\nodevars.bat instead, it will do the job for you
Well in my case doing testing via Mocha i tried everything just to realize i have to remove single quotes around my test case script tag inside package.json.
I am running mocha test case on all *.test.js files as can see below:
package.json
Before:
"scripts": {
"test": "mocha server/**/*.test.js",
"test-watch": "nodemon --exec 'npm run test'"
}
After(removing single quotes - npm run test):
"scripts": {
"test": "mocha server/**/*.test.js",
"test-watch": "nodemon --exec npm run test"
}
Worked for me, just in case someone else also gets stuck on this.
Check npm config by command:
npm config list
It needs properties: "prefix", global "prefix" and "node bin location".
; userconfig C:\Users\username\.npmrc
cache = "C:\\ProgramData\\npm-cache"
msvs_version = "2015"
prefix = "C:\\ProgramData\\npm"
python = "C:\\Python27\\"
registry = "http://registry.com/api/npm/npm-packages/"
; globalconfig C:\ProgramData\npm\etc\npmrc
cache = "C:\\ProgramData\\npm-cache"
prefix = "C:\\ProgramData\\npm"
; node bin location = C:\Program Files\nodejs\node.exe
; cwd = C:\WINDOWS\system32
In this case it needs to add these paths to the end of environment variable PATH:
;C:\Program Files\nodejs;C:\ProgramData\npm;
If you used ms build tools to install node the path is here:
C:\Program Files (x86)\Microsoft Visual Studio\2019\BuildTools\MSBuild\Microsoft\VisualStudio\NodeJs
You don't need to "install" Node.js. Just download the package from https://nodejs.org/en/download/releases/ and extract the contents somewhere. Then, in a command prompt, you can navigate there using cd. Then you can run npm from that location. While you will have to do the cd C:\Users\YourAcct\Documents\node-v16.13.0-win-x64 or similar command before you can run it, it's a way to get it onto your computer and run npm without having to be an admin or editing environmental variables.
The issue is with system policy. I have tried the following comments in powers heel then it is started working
$> Set-ExecutionPolicy Unrestricted -Scope CurrentUser -Force
$> npm install -g npm-windows-upgrade
$> npm-windows-upgrade
I got this idea from the following link
After adding environment varible path restart your machine maybe this will work. it work for me. i was using vm.
I had run the MacPorts installer (2.0.3) for my OS X Leopard (10.5.8) which finished "successfully". Unfortunately the port command was not available so I looked in the MacPorts Guide which says that the installer should have run a so-called "postflight" script that sets the necessary environment variables. I tried to run the postflight script manually (which I downloaded from here), but the execution fails with the following output:
Detected the bash shell.
Your shell already has the right PATH environment variable for use with
MacPorts!
Your shell already has the right MANPATH environment variable for use with
MacPorts!
Your shell already has the right DISPLAY environment variable for use with
MacPorts!
Adding [default] tag to sources.conf if needed...
couldn't read file "/Contents/Resources/upgrade_sources_conf_default.tcl": no
such file or directory
Updating port image format...
couldn't read file "/Contents/Resources/images_to_archives.tcl": no such file or
directory
Synchronizing the MacPorts installation with the project's rsync server...
-bash: __PREFIX__/bin/port: No such file or directory
An attempt to synchronize your recent MacPorts installation with the project's
rsync server failed!
Please run 'sudo port -d selfupdate' manually to find out the cause of the
error.
You have succesfully installed the MacPorts system, launch a terminal and try it
out!
Read the port(1) manual page and http://guide.macports.org for help,
http://www.macports.org/contact.php if you need to get in touch with The
MacPorts Project.
Any ideas?
First invoke the port command directly:
$ /opt/local/bin/port help
If that comes back with something reasonable (like the help text) then it's just that your $PATH isn't being used by your current shell. Try logging off and back on again to resolve that in the short term (this will test that your .bashrc file is correctly configured) or you could just modify the PATH environment variable directly (which doesn't test .bashrc):
$ export PATH=$PATH:/opt/local/bin
You downloaded the postflight script but it alone cannot access the accessory scripts in Contents/ because those are located into the install package.
Those missing Tcl scripts are for upgrading from an older install, the log says PATH was already correctly configured but the macports bin directory could have the wrong position in PATH variables, for instance being at the end of PATH.
If you are doing a fresh install you can just only need PATH and MANPATH -you want man pages provided by macports before system's ones- as per [1]
[1] http://guide.macports.org/#installing.shell.postflight