Are there any dependencies between Spark and Hadoop?
If not, are there any features I'll miss when I run Spark without Hadoop?
Spark is an in-memory distributed computing engine.
Hadoop is a framework for distributed storage (HDFS) and distributed processing (YARN).
Spark can run with or without Hadoop components (HDFS/YARN)
Distributed Storage:
Since Spark does not have its own distributed storage system, it has to depend on one of these storage systems for distributed computing.
S3 – Non-urgent batch jobs. S3 fits very specific use cases when data locality isn’t critical.
Cassandra – Perfect for streaming data analysis and an overkill for batch jobs.
HDFS – Great fit for batch jobs without compromising on data locality.
Distributed processing:
You can run Spark in three different modes: Standalone, YARN and Mesos
Have a look at the below SE question for a detailed explanation about both distributed storage and distributed processing.
Which cluster type should I choose for Spark?
Spark can run without Hadoop but some of its functionality relies on Hadoop's code (e.g. handling of Parquet files). We're running Spark on Mesos and S3 which was a little tricky to set up but works really well once done (you can read a summary of what needed to properly set it here).
(Edit) Note: since version 2.3.0 Spark also added native support for Kubernetes
By default , Spark does not have storage mechanism.
To store data, it needs fast and scalable file system. You can use S3 or HDFS or any other file system. Hadoop is economical option due to low cost.
Additionally if you use Tachyon, it will boost performance with Hadoop. It's highly recommended Hadoop for apache spark processing.
As per Spark documentation, Spark can run without Hadoop.
You may run it as a Standalone mode without any resource manager.
But if you want to run in multi-node setup, you need a resource manager like YARN or Mesos and a distributed file system like HDFS,S3 etc.
Yes, spark can run without hadoop. All core spark features will continue to work, but you'll miss things like easily distributing all your files (code as well as data) to all the nodes in the cluster via hdfs, etc.
Yes, you can install the Spark without the Hadoop.
That would be little tricky
You can refer arnon link to use parquet to configure on S3 as data storage.
http://arnon.me/2015/08/spark-parquet-s3/
Spark is only do processing and it uses dynamic memory to perform the task, but to store the data you need some data storage system. Here hadoop comes in role with Spark, it provide the storage for Spark.
One more reason for using Hadoop with Spark is they are open source and both can integrate with each other easily as compare to other data storage system. For other storage like S3, you should be tricky to configure it like mention in above link.
But Hadoop also have its processing unit called Mapreduce.
Want to know difference in Both?
Check this article: https://www.dezyre.com/article/hadoop-mapreduce-vs-apache-spark-who-wins-the-battle/83
I think this article will help you understand
what to use,
when to use and
how to use !!!
Yes, of course. Spark is an independent computation framework. Hadoop is a distribution storage system(HDFS) with MapReduce computation framework. Spark can get data from HDFS, as well as any other data source such as traditional database(JDBC), kafka or even local disk.
Yes, Spark can run with or without Hadoop installation for more details you can visit -https://spark.apache.org/docs/latest/
Yes spark can run without Hadoop. You can install spark in your local machine with out Hadoop. But Spark lib comes with pre Haddop libraries i.e. are used while installing on your local machine.
You can run spark without hadoop but spark has dependency on hadoop win-utils. so some features may not work, also if you want to read hive tables from spark then you need hadoop.
Not good at english,Forgive me!
TL;DR
Use local(single node) or standalone(cluster) to run spark without Hadoop,but stills need hadoop dependencies for logging and some file process.
Windows is strongly NOT recommend to run spark!
Local mode
There are so many running mode with spark,one of it is called local will running without hadoop dependencies.
So,here is the first question:how to tell spark we want to run on local mode?
After read this official doc,i just give it a try on my linux os:
Must install java and scala,not the core content so skip it.
Download spark package
There are "without hadoop" and "hadoop integrated" 2 type of package
The most important thing is "without hadoop" do NOT mean run without hadoop but just not bundle with hadoop so you can bundle it with your custom hadoop!
Spark can run without hadoop(HDFS and YARN) but need hadoop dependency jar such as parquet/avro etc SerDe class,so strongly recommend to use "integrated" package(and you will found missing some log dependencies like log4j and slfj and other common utils class if chose "without hadoop" package but all this bundled with hadoop integrated pacakge)!
Run on local mode
Most simple way is just run shell，and you will see the welcome log
# as same as ./bin/spark-shell --master local[*]
./bin/spark-shell
Standalone mode
As same as blew,but different with step 3.
# Starup cluster
# if you want run on frontend
# export SPARK_NO_DAEMONIZE=true
./sbin/start-master.sh
# run this on your every worker
./sbin/start-worker.sh spark://VMS110109:7077
# Submit job or just shell
./bin/spark-shell spark://VMS110109:7077
On windows?
I kown so many people run spark on windown just for study,but here is so different on windows and really strongly NOT recommend to use windows.
The most important things is download winutils.exe from here and configure system variable HADOOP_HOME to point where winutils located.
At this moment 3.2.1 is the most latest release version of spark,but a bug is exist.You will got a exception like Illegal character in path at index 32: spark://xxxxxx:63293/D:\classe when run ./bin/spark-shell.cmd,only startup a standalone cluster then use ./bin/sparkshell.cmd or use lower version can temporary fix this.
For more detail and solution you can refer for here
No. It requires full blown Hadoop installation to start working - https://issues.apache.org/jira/browse/SPARK-10944
Related
I am new to HBase, recently I installed HBase and tried to start it on my Mac. Everything is fine and I could play with HBase. In some articles, it said I should start Hadoop first when using HBase, I am wondering if this prerequisite changed?
Hadoop is not a hard requirement for HBase unless you are running fully distributed which you are not. Running on a single node like you are you can use the local filesystem. See HBase run modes: Standalone and Distributed for more information.
Your local filesystem (the file:// URI) is Hadoop-compatible. Hbase requires a Hadoop compatible storage layer, but that does not mean that it must literally be HDFS.
HDFS will simply provide scalability and reliability
I understand you can download Spark source code (1.5.1), or prebuilt binaries for various versions of Hadoop. As of Oct 2015, the Spark webpage http://spark.apache.org/downloads.html has prebuilt binaries against Hadoop 2.6+, 2.4+, 2.3, and 1.X.
I'm not sure what version to download.
I want to run a Spark cluster in standalone mode using AWS machines.
<EDIT>
I will be running a 24/7 streaming process. My data will be coming from a Kafka stream. I thought about using spark-ec2, but since I already have persistent ec2 machines, I thought I might as well use them.
My understanding is that since my persistent workers need to perform checkpoint(), it needs to have access to some kind of shared file system with the master node. S3 seems like a logical choice.
</EDIT>
This means I need to access S3, but not hdfs. I do not have Hadoop installed.
I got a pre-built Spark for Hadoop 2.6. I can run it in local mode, such as the wordcount example. However, whenever I start it up, I get this message
WARN NativeCodeLoader: Unable to load native-hadoop library for your platform... using builtin-java classes where applicable
Is this a problem? Do I need hadoop?
<EDIT>
It's not a show stopper but I want to make sure I understand the reason of this warning message. I was under the assumption that Spark doesn't need Hadoop, so why is it even showing up?
</EDIT>
I'm not sure what version to download.
This consideration will also be guided by what existing code you are using, features you require, and bug tolerance.
I want to run a Spark cluster in standalone mode using AWS instances.
Have you considered simply running Apache Spark on Amazon EMR? See also How can I run Spark on a cluster? from Spark's FAQ, and their reference to their EC2 scripts.
This means I need to access S3, but not hdfs
One does not imply the other. You can run a Spark cluster on EC2 instances perfectly fine, and never have to access S3. While many examples are written using S3 access through the out-of-the-box S3 "fs" drivers for the Hadoop library, pay attention that there are now 3 different access methods. Configure as appropriate.
However, your choice of libraries to load will depend on where your data is. Spark can access any filesystem supported by Hadoop, from which there are several to choose.
Is your data even in files? Depending on your application, and where your data is, you may only need to use Data Frame over SQL, Cassandra, or others!
However, whenever I start it up, I get this message
WARN NativeCodeLoader: Unable to load native-hadoop library for your platform... using builtin-java classes where applicable
Is this a problem? Do I need hadoop?
Not a problem. It is telling you that it is falling back to a non-optimum implementation. Others have asked this question, too.
In general, it sounds like you don't have any application needs right now, so you don't have any dependencies. Dependencies are what would drive different configurations such as access to S3, HDFS, etc.
I can run it in local mode, such as the wordcount example.
So, you're good?
UPDATE
I've edited the original post
My data will be coming from a Kafka stream. ... My understanding is that .. my persistent workers need to perform checkpoint().
Yes, the Direct Kafka approach is available from Spark 1.3 on, and per that article, uses checkpoints. These require a "fault-tolerant, reliable file system (e.g., HDFS, S3, etc.)". See the Spark Streaming + Kafka Integration Guide for your version for specific caveats.
So why [do I see the Hadoop warning message]?
The Spark download only comes with so many Hadoop client libraries. With a fully-configured Hadoop installation, there are also platform-specific native binaries for certain packages. These get used if available. To use them, augment Spark's classpath; otherwise, the loader will fallback to less performant versions.
Depending on your configuration, you may be able to take advantage of a fully configured Hadoop or HDFS installation. You mention taking advantage of your existing, persistent EC2 instances, rather than using something new. There's a tradeoff between S3 and HDFS: S3 is a new resource (more cost) but survives when your instance is offline (can take compute down and have persisted storage); however, S3 might suffer from latency compared to HDFS (you already have the machines, why not run a filesystem over them?), as well as not behave like a filesystem in all cases. This tradeoff is described by Microsoft for choosing Azure storage vs. HDFS, for example, when using HDInsight.
We're also running Spark on EC2 against S3 (via the s3n file system). We had some issue with the pre-built versions for Hadoop 2.x. Regrettably I don't remember what the issue was. But in the end we're running with the pre-built Spark for Hadoop 1.x and it works great.
I wanted to know that what is the performance gain or loss if I use pig in local mode (which internally calls Map reduce) vs using PIG-withouthadoop.jar file.?
Does PIG-withouthadoop.jar really does not use hadoop ???
And If I only want to use Pig without clusters, like design a data flow, then what should I use,? Pig in local mode OR pig-withouthadoop.jar file??
Currently I have written my script using pig local mode and while trying to deploy in server and set up PIG in local mode, I think I also need HADOOP_HOME to be set in the environment variables before setting the PIG_HOME variable
Kindly advice ..
Thanks in advance. :)
Let me answer your question in a sequence:
1) When we talk about performance, then if we assume the file size and the Pig script to be constant, while running in local mode and Hadoop mode. Then, definitely the processing will be faster in local mode as all the task is getting performed in a single JVM and but in case of Hadoop mode, the input file will be carried to the data nodes, then the Pig script or UDFs will also get carried to the cluster. This will demand more time, although, in both the cases the pig scripts and UDFs will internally get converted to map and reduce task and also the number of map and reduce class constructed will always be same in both the cases. We can check this by using EXPLAIN command.
2) No. Pig internally contains a bundle of Hadoop jars. So, if you haven't started the Hadoop by using start-all.sh command, pig will work as it uses the internal Hadoop bundled jars. Now, the interesting part is, if you have installed hadoop and then use pig without starting the Hadoop, then sometimes it will not work because the of Hadoop version mismatch. So to be in safe side start Hadoop explicitly. So, Pig always uses Hadoop. :)
3) Always use Hadoop local mode if the file size is less. As already explained, Pig by default comes with Hadoop jars.
4) Yes you need to set this, if you are using Hadoop explicitly.
Local mode will literally run Pig, HDFS and MR1 (or YARN+MR2) in one JVM.
It's not really relevant to compare performance difference in local vs cluster modes. Local mode is generally used for testing or running small MR jobs that can work on 1 node.
With regards to pig-withouthadoop.jar, I can see how the jar's name can be construed to mean that Pig won't using Hadoop. But that is not the case.
Pig packages two jars relevant to execution:
pig.jar, which is an "uber jar" that also includes all hadoop and mapreduce jars. You can literally take that jar on a box which does not already have hadoop installed, and run pig (after setting the right configs and environment.)
But most clusters already have hadoop installed and configured. In that case, you use pig-withouthadoop.jar. This jar is half the size of the uber jar, for obvious reasons.
Either ways you'll need to ensure hadoop configs hdfs-site.xml, mapred-site.xml etc are in standard location (/etc/hadoop/conf/ typically) for Pig to work.
I am new to Hadoop and much interested in Hadoop Administration,so i tried to install Hadoop 2.2.0 in Ubuntu 12.04 as pseudo distributed mode and installed successfully and run some example jar files also ,now i am trying learn further ,trying to learn data back up and recovery part now,can anyone tell ways to take data back back up and recovery it in hadoop 2.2.0 ,and also please suggest any good books for Hadoop Adminstration and steps to learn Hadoop Adminstration.
Thanks in Advance.
There is no classic backup and recovery functionality in Hadoop. There are several reasons for this:
HDFS uses block level replication for data protection via redundancy.
HDFS scales out massively in size, and it is becoming more economic to backup to disk, rather than tape.
The size of "Big Data" doesn't lend itself to being easily backed up.
Instead of backups, Hadoop uses data replication. Internally, it creates multiple copies of each block of data (by default, 3 copies). It also has a function called 'distcp', which allows you to replicate copies of data between clusters. This is what's typically done for "backups" by most Hadoop operators.
Some companies, like Cloudera, are incorporating the distcp tool into creating a 'backup' or 'replication' service for their distribution of Hadoop. It operates against a specific directory in HDFS, and replicates it to another cluster.
If you really wanted to create a backup service for Hadoop, you can create one manually yourself. You would need some mechanism of accessing the data (NFS gateway, webFS, etc), and could then use tape libraries, VTLs, etc. to create backups.
What are sites for Hadoop Best practice , Not the Books where I can get the step by step process to create new projects and small examples . I am not able to find a single site like this , please share.
There is an awesome article from yahoo developers on Apache Hadoop: Best Practices and Anti-Patterns
Hadoop is not something one single application instead it is a distributed processing framework which is used by several applications which sits top of this framework. Pig, Hive, HBase, Cassandra, etc are few of many such application designed for specific requirement. Underneath all of these application consume Hadoop framework which mainly consist of distributed file system (HDFS) and distributed processing (MapReduce).
Technically when you have a bare minimum Hadoop cluster (HDFS + MapReduce only) you can start writing MapReduce based applications (in Java or other languages are supported through Hadoop Streaming) to process some data.
What you could do is first download a pre-build/configured Hadoop virtual Image from Cloudera or Hortonworks distribution and get it running in your machine. After that start learning writing MapReduce jobs in Java and run in your virtual machine.
Here is the URL to download Cloudera Hadoop Distribution VM
Here is the link to learn writing simplest wordcount job.