I'm trying to log the time for the execution of a command, so I'm doing that by using the builtin time command in bash. I also wish to redirect the stderr and stdout to a logfile at the same time. However, it doesn't seem to be working as the stderr just spills out onto my terminal.
Here is the command:
rm -rf doxygen
mkdir doxygen
bash -c 'time "/cygdrive/d/Program Files/doxygen/bin/doxygen.exe" Doxyfile > doxygen/doxygen.log 1>&2' genfile > doxygen/time 1>&2 &
What am I doing wrong here?
You are using 1>&2 instead of 2>&1.
With the lengths of names reduced, you're trying to run:
bash -c 'time doxygen Doxyfile > doxygen.log 1>&2' genfile > doxygen.time 1>&2 &
The > doxygen.log sends standard output to the file; the 1>&2 then changes your mind and sends standard output to the same place that standard error is going. Similarly with the outer pair of redirections.
If you used:
bash -c 'time doxygen Doxyfile > doxygen.log 2>&1' genfile > doxygen.time 2>&1 &
then you send standard error to the same place that standard output goes — twice.
Incidentally, do you realize that the genfile serves as the $0 for the script run by bash -c '…'? I'm not convinced it is needed in your script. To see this, try:
bash -c 'echo 0=$0; echo 1=$1; echo 2=$2' genfile jarre oxygene
When run, this produces:
0=genfile
1=jarre
2=oxygene
Related
I tried to compare two files and output customized string. Following is my script.
#!/bin/bash
./${1} > tmp
if ! diff -q tmp ans.txt &>/dev/null; then
>&2 echo "different"
else
>&2 echo "same"
fi
When I execute script, I get:
sh cmp.sh ans.txt
different
Files tmp and ans.txt differ
The weird part is when I type diff -q tmp ans.txt &>/dev/null. No output will show up.
How to fix it(I don't want line:"Files tmp and ans.txt differ")? Thanks!
Most probably the version of sh you are using doesn't understand the bash (deprecated/obsolete) extension &> that redirect both stdout and stderr at the same time. In posix shell the command &>/dev/null I think is parsed as { command & }; > /dev/null - it results in running the command in the background & and the > /dev/null part I think is ignored, as it just redirect output of a nonexistent command - it's valid syntax, but executes nothing. Because running the command in the background succeeds, the if always succeeds.
Prefer not to use &> - use >/dev/null 2>&1 instead. Use diff to pretty print the files comparison. Use cmp in batch scripts to compare files.
if cmp -s tmp ans.txt; then
I know how to redirect stdout to a file:
exec > foo.log
echo test
this will put the 'test' into the foo.log file.
Now I want to redirect the output into the log file AND keep it on stdout
i.e. it can be done trivially from outside the script:
script | tee foo.log
but I want to do declare it within the script itself
I tried
exec | tee foo.log
but it didn't work.
#!/usr/bin/env bash
# Redirect stdout ( > ) into a named pipe ( >() ) running "tee"
exec > >(tee -i logfile.txt)
# Without this, only stdout would be captured - i.e. your
# log file would not contain any error messages.
# SEE (and upvote) the answer by Adam Spiers, which keeps STDERR
# as a separate stream - I did not want to steal from him by simply
# adding his answer to mine.
exec 2>&1
echo "foo"
echo "bar" >&2
Note that this is bash, not sh. If you invoke the script with sh myscript.sh, you will get an error along the lines of syntax error near unexpected token '>'.
If you are working with signal traps, you might want to use the tee -i option to avoid disruption of the output if a signal occurs. (Thanks to JamesThomasMoon1979 for the comment.)
Tools that change their output depending on whether they write to a pipe or a terminal (ls using colors and columnized output, for example) will detect the above construct as meaning that they output to a pipe.
There are options to enforce the colorizing / columnizing (e.g. ls -C --color=always). Note that this will result in the color codes being written to the logfile as well, making it less readable.
The accepted answer does not preserve STDERR as a separate file descriptor. That means
./script.sh >/dev/null
will not output bar to the terminal, only to the logfile, and
./script.sh 2>/dev/null
will output both foo and bar to the terminal. Clearly that's not
the behaviour a normal user is likely to expect. This can be
fixed by using two separate tee processes both appending to the same
log file:
#!/bin/bash
# See (and upvote) the comment by JamesThomasMoon1979
# explaining the use of the -i option to tee.
exec > >(tee -ia foo.log)
exec 2> >(tee -ia foo.log >&2)
echo "foo"
echo "bar" >&2
(Note that the above does not initially truncate the log file - if you want that behaviour you should add
>foo.log
to the top of the script.)
The POSIX.1-2008 specification of tee(1) requires that output is unbuffered, i.e. not even line-buffered, so in this case it is possible that STDOUT and STDERR could end up on the same line of foo.log; however that could also happen on the terminal, so the log file will be a faithful reflection of what could be seen on the terminal, if not an exact mirror of it. If you want the STDOUT lines cleanly separated from the STDERR lines, consider using two log files, possibly with date stamp prefixes on each line to allow chronological reassembly later on.
Solution for busybox, macOS bash, and non-bash shells
The accepted answer is certainly the best choice for bash. I'm working in a Busybox environment without access to bash, and it does not understand the exec > >(tee log.txt) syntax. It also does not do exec >$PIPE properly, trying to create an ordinary file with the same name as the named pipe, which fails and hangs.
Hopefully this would be useful to someone else who doesn't have bash.
Also, for anyone using a named pipe, it is safe to rm $PIPE, because that unlinks the pipe from the VFS, but the processes that use it still maintain a reference count on it until they are finished.
Note the use of $* is not necessarily safe.
#!/bin/sh
if [ "$SELF_LOGGING" != "1" ]
then
# The parent process will enter this branch and set up logging
# Create a named piped for logging the child's output
PIPE=tmp.fifo
mkfifo $PIPE
# Launch the child process with stdout redirected to the named pipe
SELF_LOGGING=1 sh $0 $* >$PIPE &
# Save PID of child process
PID=$!
# Launch tee in a separate process
tee logfile <$PIPE &
# Unlink $PIPE because the parent process no longer needs it
rm $PIPE
# Wait for child process, which is running the rest of this script
wait $PID
# Return the error code from the child process
exit $?
fi
# The rest of the script goes here
Inside your script file, put all of the commands within parentheses, like this:
(
echo start
ls -l
echo end
) | tee foo.log
Easy way to make a bash script log to syslog. The script output is available both through /var/log/syslog and through stderr. syslog will add useful metadata, including timestamps.
Add this line at the top:
exec &> >(logger -t myscript -s)
Alternatively, send the log to a separate file:
exec &> >(ts |tee -a /tmp/myscript.output >&2 )
This requires moreutils (for the ts command, which adds timestamps).
Using the accepted answer my script kept returning exceptionally early (right after 'exec > >(tee ...)') leaving the rest of my script running in the background. As I couldn't get that solution to work my way I found another solution/work around to the problem:
# Logging setup
logfile=mylogfile
mkfifo ${logfile}.pipe
tee < ${logfile}.pipe $logfile &
exec &> ${logfile}.pipe
rm ${logfile}.pipe
# Rest of my script
This makes output from script go from the process, through the pipe into the sub background process of 'tee' that logs everything to disc and to original stdout of the script.
Note that 'exec &>' redirects both stdout and stderr, we could redirect them separately if we like, or change to 'exec >' if we just want stdout.
Even thou the pipe is removed from the file system in the beginning of the script it will continue to function until the processes finishes. We just can't reference it using the file name after the rm-line.
Bash 4 has a coproc command which establishes a named pipe to a command and allows you to communicate through it.
Can't say I'm comfortable with any of the solutions based on exec. I prefer to use tee directly, so I make the script call itself with tee when requested:
# my script:
check_tee_output()
{
# copy (append) stdout and stderr to log file if TEE is unset or true
if [[ -z $TEE || "$TEE" == true ]]; then
echo '-------------------------------------------' >> log.txt
echo '***' $(date) $0 $# >> log.txt
TEE=false $0 $# 2>&1 | tee --append log.txt
exit $?
fi
}
check_tee_output $#
rest of my script
This allows you to do this:
your_script.sh args # tee
TEE=true your_script.sh args # tee
TEE=false your_script.sh args # don't tee
export TEE=false
your_script.sh args # tee
You can customize this, e.g. make tee=false the default instead, make TEE hold the log file instead, etc. I guess this solution is similar to jbarlow's, but simpler, maybe mine has limitations that I have not come across yet.
Neither of these is a perfect solution, but here are a couple things you could try:
exec >foo.log
tail -f foo.log &
# rest of your script
or
PIPE=tmp.fifo
mkfifo $PIPE
exec >$PIPE
tee foo.log <$PIPE &
# rest of your script
rm $PIPE
The second one would leave a pipe file sitting around if something goes wrong with your script, which may or may not be a problem (i.e. maybe you could rm it in the parent shell afterwards).
I'm looking for a solution (similar to the bash code below) to copy both stdout and stderr to a file in addition to the screen within ksh on Solaris.
The following code works great in the bash shell:
#!/usr/bin/bash
# Clear the logfile
>logfile.txt
# Redirect all script output to a logfile as well as their normal locations
exec > >(tee -a logfile.txt)
exec 2> >(tee -a logfile.txt >&2)
date
ls -l /non-existent/path
For some reason this is throwing a syntax error on Solaris. I assume it's because I can't do process substitution, and I've seen some posts suggesting the use of mkfifo, but I've yet to come up with a working solution.
Does anyone know of a way that all output can be redirected to a file in addition to the default locations?
Which version of ksh are you using? The >() is not supported in ksh88, but is supported in ksh93 - the bash code should work unchanged (aside from the #! line) on ksh93.
If you are stuck with ksh88 (poor thing!) then you can emulate the bash/ksh93 behaviour using a named pipe:
#!/bin/ksh
# Clear the logfile
>logfile.txt
pipe1="/tmp/mypipe1.$$"
pipe2="/tmp/mypipe2.$$"
trap 'rm "$pipe1" "$pipe2"' EXIT
mkfifo "$pipe1"
mkfifo "$pipe2"
tee -a logfile.txt < "$pipe1" &
tee -a logfile.txt >&2 < "$pipe2" &
# Redirect all script output to a logfile as well as their normal locations
exec >"$pipe1"
exec 2>"$pipe2"
date
ls -l /non-existent/path
The above is a second version to enable stderr to be redirected to a different file.
How about this:
(some commands ...) 2>&1 | tee logfile.txt
Add -a to the tee command line for subsequent invocations to append rather than overwrite.
In ksh, the following works very well for me
LOG=log_file.$(date +%Y%m%d%H%M%S).txt
{
ls
date
... whatever command
} 2>&1 | tee -a $LOG
I would like to run several commands, and capture all output to a logfile. I also want to print any errors to the screen (or optionally mail the output to someone).
Here's an example. The following command will run three commands, and will write all output (STDOUT and STDERR) into a single logfile.
{ command1 && command2 && command3 ; } > logfile.log 2>&1
Here is what I want to do with the output of these commands:
STDERR and STDOUT for all commands goes to a logfile, in case I need it later--- I usually won't look in here unless there are problems.
Print STDERR to the screen (or optionally, pipe to /bin/mail), so that any error stands out and doesn't get ignored.
It would be nice if the return codes were still usable, so that I could do some error handling. Maybe I want to send email if there was an error, like this:
{ command1 && command2 && command3 ; } > logfile.log 2>&1 || mailx -s "There was an error" stefanl#example.org
The problem I run into is that STDERR loses context during I/O redirection. A '2>&1' will convert STDERR into STDOUT, and therefore I cannot view errors if I do 2> error.log
Here are a couple juicier examples. Let's pretend that I am running some familiar build commands, but I don't want the entire build to stop just because of one error so I use the '--keep-going' flag.
{ ./configure && make --keep-going && make install ; } > build.log 2>&1
Or, here's a simple (And perhaps sloppy) build and deploy script, which will keep going in the event of an error.
{ ./configure && make --keep-going && make install && rsync -av --keep-going /foo devhost:/foo} > build-and-deploy.log 2>&1
I think what I want involves some sort of Bash I/O Redirection, but I can't figure this out.
(./doit >> log) 2>&1 | tee -a log
This will take stdout and append it to log file.
The stderr will then get converted to stdout which is piped to tee which appends it to the log (if you are have Bash 4, you can replace 2>&1 | with |&) and sends it to stdout which will either appear on the tty or can be piped to another command.
I used append mode for both so that regardless of which order the shell redirection and tee open the file, you won't blow away the original. That said, it may be possible that stderr/stdout is interleaved in an unexpected way.
If your system has /dev/fd/* nodes you can do it as:
( exec 5>logfile.txt ; { command1 && command2 && command3 ;} 2>&1 >&5 | tee /dev/fd/5 )
This opens file descriptor 5 to your logfile. Executes the commands with standard error directed to standard out, standard out directed to fd 5 and pipes stdout (which now contains only stderr) to tee which duplicates the output to fd 5 which is the log file.
Here is how to run one or more commands, capturing the standard output and error, in the order in which they are generated, to a logfile, and displaying only the standard error on any terminal screen you like. Works in bash on linux. Probably works in most other environments. I will use an example to show how it's done.
Preliminaries:
Open two windows (shells, tmux sessions, whatever)
I will demonstrate with some test files, so create the test files:
touch /tmp/foo /tmp/foo1 /tmp/foo2
in window1:
mkfifo /tmp/fifo
0</tmp/fifo cat - >/tmp/logfile
Then, in window2:
(ls -l /tmp/foo /tmp/nofile /tmp/foo1 /tmp/nofile /tmp/nofile; echo successful test; ls /tmp/nofile1111) 2>&1 1>/tmp/fifo | tee /tmp/fifo 1>/dev/pts/2
Where you replace /dev/pts/2 with whatever tty you want the stderr to display.
The reason for the various successful and unsuccessful commands in the subshell is simply to generate a mingled stream of output and error messages, so that you can verify the correct ordering in the log file. Once you understand how it works, replace the “ls” and “echo” commands with scripts or commands of your choosing.
With this method, the ordering of output and error is preserved, the syntax is simple and clean, and there is only a single reference to the output file. Plus there is flexiblity in putting the extra copy of stderr wherever you want.
Try:
command 2>&1 | tee output.txt
Additionally, you can direct stdout and stderr to different places:
command > stdout.txt >& stderr.txt
command > stdout.txt |& program_for_stderr
So some combination of the above should work for you -- e.g. you could save stdout to a file, and stderr to both a file and piping to another program (with tee).
add this at the beginning of your script
#!/bin/bash
set -e
outfile=logfile
exec > >(cat >> $outfile)
exec 2> >(tee -a $outfile >&2)
# write your code here
STDOUT and STDERR will be written to $outfile, only STDERR will be seen on the console
I have a program that outputs to stdout and would like to silence that output in a Bash script while piping to a file.
For example, running the program will output:
% myprogram
% WELCOME TO MY PROGRAM
% Done.
I want the following script to not output anything to the terminal:
#!/bin/bash
myprogram > sample.s
If it outputs to stderr as well you'll want to silence that. You can do that by redirecting file descriptor 2:
# Send stdout to out.log, stderr to err.log
myprogram > out.log 2> err.log
# Send both stdout and stderr to out.log
myprogram &> out.log # New bash syntax
myprogram > out.log 2>&1 # Older sh syntax
# Log output, hide errors.
myprogram > out.log 2> /dev/null
Redirect stderr to stdout
This will redirect the stderr (which is descriptor 2) to the file descriptor 1 which is the the stdout.
2>&1
Redirect stdout to File
Now when perform this you are redirecting the stdout to the file sample.s
myprogram > sample.s
Redirect stderr and stdout to File
Combining the two commands will result in redirecting both stderr and stdout to sample.s
myprogram > sample.s 2>&1
Redirect stderr and stdout to /dev/null
Redirect to /dev/null if you want to completely silent your application.
myprogram >/dev/null 2>&1
All output:
scriptname &>/dev/null
Portable:
scriptname >/dev/null 2>&1
Portable:
scriptname >/dev/null 2>/dev/null
For newer bash (no portable):
scriptname &>-
If you are still struggling to find an answer, specially if you produced a file for the output, and you prefer a clear alternative:
echo "hi" | grep "use this hack to hide the oputut :) "
If you want STDOUT and STDERR both [everything], then the simplest way is:
#!/bin/bash
myprogram >& sample.s
then run it like ./script, and you will get no output to your terminal. :)
the ">&" means STDERR and STDOUT. the & also works the same way with a pipe: ./script |& sed
that will send everything to sed
Try with:
myprogram &>/dev/null
to get no output
Useful variations:
Get only the STDERR in a file, while hiding any STDOUT even if the
program to hide isn't existing at all. (does not ever hang):
stty -echo && ./programMightNotExist 2> errors.log && stty echo
Detach completely and silence everything, even killing the parent
script won't abort ./prog (Does behave just like nohup):
./prog </dev/null >/dev/null 2>&1 &
nohup can be used as well to fully detach, as follow:
nohup ./prog &
A log file nohup.out will be created aside of the script, use tail -f nohup.out to read it.
Note: This answer is related to the question "How to turn off echo while executing a shell script Linux" which was in turn marked as duplicated to this one.
To actually turn off the echo the command is:
stty -echo
(this is, for instance; when you want to enter a password and you don't want it to be readable. Remember to turn echo on at the end of your script, otherwise the person that runs your script won't see what he/she types in from then on. To turn echo on run:
stty echo
For output only on error:
so [command]