I first build sumo using
export CPPFLAGS="$CPPFLAGS -I/opt/local/include"
export LDFLAGS="$LDFLAGS -L/opt/local/lib"
make -f Makefile.cvs
./configure --with-fox-config=/opt/local/bin/fox-config -with-proj-gdal=/opt/local --with-xerces=/opt/local --prefix=/opt/sumo
then sudo make install ends with the following error
NIImporter_ArcView.cpp:129:49: error: no member named 'Open' in 'OGRSFDriverRegistrar'
best regards
SG
In ./configure should be --with-proj-gdal=/opt/local (with two dashes).
Related
I want to download an API called libtrading, the process to download it in terminal is as the follows,
OSX
$ brew install libevent glib pkgconfig
$ pip install pyyaml
Then run:
$ make install
You can also run the test harness:
$ make check
I have successfully processed the first two steps, but when I put 'make install' and 'make check', it always says (make: *** No rule to make target `check'. Stop. )
Does anyone know how can I solve the problem? Is it because some file path is needed here? but I don't know what is it.
Thanks in advance!
I am installing fabric in a custom path $HOME//gopath/src/github.com/hyperledger/fabric using the make command but after installing all the 15 steps, I am getting the following error
Step 15/15 : LABEL org.hyperledger.fabric.version=1.0.2 org.hyperledger.fabric.base.version=0.3.2
---> Running in ed05a67810db
Removing intermediate container ed05a67810db
---> 99b4b0b28957
Successfully built 99b4b0b28957
Successfully tagged hyperledger/fabric-javaenv:latest
docker tag hyperledger/fabric-javaenv hyperledger/fabric-javaenv:x86_64-1.0.2
build/bin/peer
CGO_CFLAGS=" " GOBIN=/root/gopath/src/github.com/hyperledger/fabric/build/bin go install -tags "" -ldflags "-X github.com/hyperledger/fabric/common/metadata.Version=1.0.2 -X github.com/hyperledger/fabric/common/metadata.BaseVersion=0.3.2 -X github.com/hyperledger/fabric/common/metadata.BaseDockerLabel=org.hyperledger.fabric -X github.com/hyperledger/fabric/common/metadata.DockerNamespace=hyperledger -X github.com/hyperledger/fabric/common/metadata.BaseDockerNamespace=hyperledger" github.com/hyperledger/fabric/peer
go build github.com/hyperledger/fabric/vendor/github.com/miekg/pkcs11: invalid flag in #cgo LDFLAGS: -Wl,--no-as-needed
Makefile:227: recipe for target 'build/bin/peer' failed
make: *** [build/bin/peer] Error 1
Docker version 17.12.0-ce, build c97c6d6
docker-compose version 1.18.0, build 8dd22a9
go version go1.9.4 linux/amd64
OS : Ubuntu 16.04
I have set the following path also
$ mkdir $HOME/gopath
$ export GOPATH=$HOME/gopath
$ export GOROOT=$HOME/go
$ export PATH=$PATH:$GOROOT/bin
Jira Link: https://jira.hyperledger.org/browse/FAB-2218 which I have already done
It is a known issue in go 1.9.4:
https://github.com/golang/go/issues/23739
While go people are fixing it, you can manually whitelist the flags before starting make:
$ export CGO_LDFLAGS_ALLOW='-Wl,--no-as-needed'
$ make
Alternatively you can just downgrade to go 1.9.3
as far as I know you don't need to build the fabric itself.
You just need to have sources in the gopath, as your chaincode will need this, when you are building your chaincode for the blockchain itself.
In addition you will probably also need to install the fabric-ca for your chaincode to build successfully, if you use the certificate-stuff.
This is sufficient to check if you installed fabric correctly:
cd $GOPATH/src/github.com/hyperledger/fabric
make unit-test
Keep going if this works.
I found this confusing at first as well ;)
I'd assume you switch to golang 1.9.4 or greater hence I belive this actually related to following issue, to solve it you need to update vendor dependencies:
govendor fetch github.com/hyperledger/fabric/vendor/github.com/miekg/pkcs11
Next continue to build binaries and run tests.
I am trying to upgrade asterisk 11 to 14 on Debian (8.7) and I got the following error when I do make install.
The error is as below
res_pjsip_transport_management.c: In function ‘monitored_transport_state_callback’:
res_pjsip_transport_management.c:190:8: error: ‘PJSIP_TP_STATE_SHUTDOWN’ undeclared (first use in this function)
case PJSIP_TP_STATE_SHUTDOWN:
^
res_pjsip_transport_management.c:190:8: note: each undeclared identifier is reported only once for each function it appears in
/root/asterisk-14.3.0/Makefile.rules:149: recipe for target 'res_pjsip_transport_management.o' failed
make[1]: *** [res_pjsip_transport_management.o] Error 1
Makefile:401: recipe for target 'res' failed
make: *** [res] Error 2
The commands I used are as follow
tar -zxvf asterisk-14-current.tar.gz
/etc/init.d/asterisk stop
cd asterisk-14.3.0/
./configure
rm -f /usr/lib/asterisk/modules/*
make install
I tried some solutions from the internet and it didn't fix....
It seems like the pjsip versions do not match (could be that there is more then one version installed) so you want to remove all previous/existing versions of PJSip. If you do not know what packages belong to pjsip you can search them via:
apt-cache search pjsip
or
dpkg -l | grep pj
And once you know which package to remove do
apt-get --purge remove <package name>
You then want to download the latest version of pjsip (current 2.6 according to Asterisk website)
wget wget http://www.pjsip.org/release/2.6/pjproject-2.6.tar.bz2
tar -xjvf pjproject-2.6.tar.bz2
You want to place the pjproject in /usr/local.
cp -R pjproject-2.6 /usr/local/
Once this is done you have to build/compile/install the pjproject and
./configure --prefix=/usr --enable-shared CFLAGS='-O2 -DNDEBUG' //Various options (enable/disable) can be put in here. Please refer to manual
make dep
make
make install
ldconfig
Verify that pjproject has been installed in the target location
ldconfig -p | grep pj
Once this has been done you can now go to you Asterisk folder and issue
./configure
and proceed with installation further :)
pjsip version not match.
Never tried 14*(it is not LTS), for 13.* such error mean you have more then one pjsip or pjsip is not 2.4.
Before rebuilding pjsip do check
yum remove -y pjsip
rm -f `find / -name *pjsip*`
If I'm not mistaken, Asterisk 13 source code came with a built-in pjproject, but 14 will look for an installed pjproject on the system.
Make sure you have it installed (including the -dev or -devel packages, which contains the headers), than try to reconfigure asterisk source.
./bootstrap.sh
./configure
make menuconfig
I am following this document for building the Go Imagick library.
When i ran the following command
go build -tags no_pkgconfig imagick
It throws the following exception :
# imagick
src/imagick/affine_matrix.go:8:29: fatal error: wand/MagickWand.h: No such file or directory
compilation terminated
Now to resolve that i have also installed the following packages as many people suggested to resolve the error. But it didn't work either.
sudo apt-get install libmagickwand-dev libmagickcore-dev imagemagick
Moreover, when i run go build imagick
It throws the following error :
# imagick
could not determine kind of name for C.FlattenAlphaChannel
could not determine kind of name for C.RemoveAlphaChannel
Output of pkg-config --cflags --libs MagickWand gives the correct output
-fopenmp -I/usr/include/ImageMagick -lMagickWand -lMagickCore
ImageMagick is installed to this path(/usr/include/ImageMagick) only.
Their docs mention that no_pkgconfig must be used with manually set GCO_CFLAGS and CGO_LDFLAGS. So something like this should work:
export CGO_CFLAGS="$(pkg-config --cflags MagickWand)"
export CGO_LDFLAGS="$(pkg-config --libs MagickWand)"
go build -tags no_pkgconfig
As mentioned on #68 of the issue tracker, you are using way too old of a version of ImageMagick, which predates the versions that were tested for the master branch. Your Linux distro is older than the current available stable release.
You should manually install a newer ImageMagick, and remove the, one from apt. Or use some solution that allows you to manage multiple versions.
Trying to compile Mapnik on OSX 10.8
So after I clone the Github repo, I go to run the configure command like so:
./configure and then get the error:
Checking for C++ library icuuc... no
Could not find required header or shared library for icuuc
and later:
Exiting... the following required dependencies were not found:
- icuuc (ICU C++ library | configure with ICU_LIBS & ICU_INCLUDES or use ICU_LIB_NAME to specify custom lib name | more info: http://site.icu-project.org/)
Looking at the Mapnik troubleshooting area for a solution: https://github.com/mapnik/mapnik/wiki/InstallationTroubleshooting
Says: Solution: If g++ is available then ICU must be in a custom location so set the paths to the libs and includes - ie. ICU_LIBS=/usr/local/lib and ICU_INCLUDES=/usr/local/include.
By running g++ from command line I get: i686-apple-darwin11-llvm-g++-4.2: no input files
So this means that g++ is available, but I have no idea how to go about setting the paths so that configure can find them.
ICU Libraries were installed by default or with homebrew, not sure which.
terminal: brew install icu4c
Warning: icu4c-51.1 already installed
Finding the icu4c install directory:
terminal: mdfind icu4c
/usr/local/Cellar/icu4c
You can add the path of your ICU_LIB/INCLUDE to your configure command:
./configure ICU_INCLUDES=/usr/local/Cellar/icu4c/include ICU_LIBS=/usr/local/Cellar/icu4c/lib
And for more help about configure on what options are accepted do:
./configure --help
For the installation reference, you can check this:
https://github.com/mapnik/mapnik/blob/v2.2.0/INSTALL.md
As per our discussion and my last comment something like the following might work.
export ICU_LIBS=/usr/local/Cellar/icu4c/lib
export ICU_INCLUDES=/usr/local/Cellar/icu4c/include
./configure
If you find same errors:
Checking for C++ library XXX... no
Follow the command
sudo apt-get install g++ libXXX-dev
Using tips (TAB button), you can see what XXX libraries you have available
sudo apt-get install libXXX(press double TAB)