I want to install Cygwin on Windows 8.1 64bit but got no success using any variant.
I tried:
1) I downloaded fresh setup-x86_x64 from cygwin site and then tried to install from Internet but got empty mirror list.
2) The I tried manually add mirror from https://cygwin.com/mirrors.lst (this file accessible from my computer) but got "unable to get setup.ini" error.
3) then I tried to download WHOLE package manually from one of the mirrors (all mirrors normally accessible from my computer via FTP or HTTP) to setup from local package. When I downloaded all packages (about 30 Gigs) I ran setup with local package option. Package folder was scanned and I got list of categories. But there was no package in any category.
4) also I tried to run setup on my Windows 7 notebook. It got mirror list normally. Also I downloaded packages by setup program using my notebook, then transfered them to my Win 8.1 desktop, but the story was the same: I saw list of categories without packages. But on Win7 notebook I saw packages in categoies when I tried to install from the same directory.
5) Also I tried to turn off or even uninstall my firewall and antivirus software, but all results was the same.
6) I tried to run setup with administrator rights, tried to use different folders and HDD paths, tried to use x86 setup instead of x64 setup.
But nothing helped me.
Any ideas?
Define "didn't work". Post whatever error message the installer presents to you. Every little bit of information helps.
A common issue people experience while installing cygwin are outdated mirrors, i.e., websites who'd usually mirror the cygwin stack, but failed to keep it updated, which explains your issue regarding a missing/bad setup.ini file.
In any case, you most definitely would never want to actually download the entire cygwin stack, as it also includes past-, current-, and beta-versions.
As far as I know, "local installation" is a remnant of the days where one could acquire CDs containing the cygwin stack, but feel free to correct me if I'm wrong.
Related
Trying to update my 32-bit Cygwin install on a Windows 10 64-bit fresh install and every setup-x86 I have tried fails with errors.
I had it all working on my old system, which was a Windows 7 upgrade to Windows 10. My 3rd party SDK with Cygwin plus an upgrade was installed a good few years ago while on Windows 7 then did the Windows 10 upgrade thing. I could still compile my code for an embedded processor device with no errors after that.
But Microsoft corrupted my system with the last update (December 2022) so my system was unbootable and irreparable by any of their troubleshooting Advanced methods.
So I put a new hard drive in and installed windows 10 from scratch.
Two weeks later I have reinstalled much software but now I am at my SDK re-install and cannot get any Cygwin version to download.
I have a 3rd party SDK which instructs me to install their Cygwin first (version 1.5.18) then remove some environment variables, then go to http://www.crouchingtigerhiddenfruitbat.org/Cygwin/timemachine.html and Follow the “Dead Simple Instructions" and go for "any version 2017 +".
After downloading the files I must copy the directory to my original install directory, thus upgrading the install.
I just cannot download anything though.
I went to that time machine page and was totally confused. I noticed they said "this is the last 32 bit install" on several places, so I tried clicking on all those setup-x86 links.
I tried running the downloaded setup-x86 files from the download directory but each one failed.
On most of the more recent setup-x86 files,(like 2.924) it shows a small blue square telling me Windows protected me etc. I click Run anyway and then it says "Cygwin is not supported on 32-bit windows".
So I tried earlier versions like 2.909 and they show the interface; I choose download, then choose the download directory ( a folder on my desktop) then I have tried both direct connection and use system proxy; then I select a mirror (tried all of them, I think) and it begins some action then stops with errors like:
"https:\cygwin.mirror.constant.com\x86\setup.ini line 12: The current ini file requires at least version 2.924 of setup. Please download a newer version from https://cygwin.com/setup-x86.exe"
But I have already tried 2.924 and it gives the "Cygwin is not supported on 32-bit windows" error!
With setup-x86-2.874.exe, it shows the interface etc. but in the mirror list all I see is http://update.setup.invalid.
With 2.774 it does the interface then "Unable to get setup.ini from 'my selected mirror url'.
Then I tried that page https://cygwin.com/install.html#unsupported, where I tried the circa urls and did these from an Administrator command line, as they say. No good- errors.
Under "Dead Simple Instructions"(no they are not) I followed the link to the machine top level snapshot index, but each link their only gives a plain text list of files- nothing downloadable!
Anyway, copied a url link and then at step 4 it says click for setup-x86. So I did but that blue windows protection square appears. I say run anyway but then it says "Cygwin is not supported on 32-bit windows"!
I am at my wits end! It all worked fine on my old system until Microsoft ruined it with their updates.
How can I get a newer cygwin update for my v1.5, s the 3rd party instructions say???
Aha! I believe I have finally got this to work.
I just found a new release of the instructions for the 3rd party software SDK. They mention version 2.9.0 as the new version they are moving to.
I cannot access their download but I went back and read the Cygwin Time Machine page carefully again (http://www.crouchingtigerhiddenfruitbat.org/Cygwin/timemachine.html).
Under "Dead Simple Instructions", I looked through the list of dates and versions (http://ctm.crouchingtigerhiddenfruitbat.org/pub/cygwin/circa/index.html) and found 2.9.0-1; surely close enough, eh?
So I copied the URL shown there.
Step 4 Run setup-x86.exe downloaded the setup file and Itried it from an Admin CMD prompt, adding the -X and -D switches. It failed with the 32 bit error, as before.
OK so I read again and near the bottom of the page I spotted "Cygwin Setup Archive".
Ah... I went to the link provided there (http://ctm.crouchingtigerhiddenfruitbat.org/pub/cygwin/setup/setup.html) and found setup-x86-2.901.exe.
After it downloaded, I again used the command prompt to run this and an interface appeared.
I was able to choose the existing install directory, the temporary download directory and add the URL I had copied earlier.
It proceeded to get the list of packages correctly.
I then selected to view files that were installed but may need updating and clicked Next.
It all went correctly. Thanks to Doug who offered help already.
So there is a way to do this.
If anyone was looking for the solution, I found the answer in the Cygwin mailing list. You must launch the setup-x86.exe (setup-x86-2.924.exe) with the --allow-unsupported-windows option --site circa_URL arguments, much like the -X switch was used on prior legacy installers to disable signature checking. circa_URL here is a mirror of legacy repos for Cygwin, where http://ctm.crouchingtigerhiddenfruitbat.org/pub/cygwin/circa/2022/11/23/063457 is the suggested url in the mailing listing post.
Apparently, if you are on a true x86, non-64-bit, Windows OS, this flag is not necessary, though I think the repo mirror may be required.
I am attempting to install the Arelle XBRL software and these are the steps I am following.
Download the Windows 64 bit version from http://arelle.org/pub/applications/
Double click on installer
As soon as I click the installer I get an NSIS Error message depicted below.
What I have tried:
E-mailing the Arelle support dept but they don't seem to answer at all
Searched for a solution
The most common solution I have found was to run the installer from the command prompt with the below syntax. This seems to have worked for many people but I am still getting the exact same error.
"C:\Users\MyPc\Desktop\arelle-win-x64-2019-07-24.exe" /NCRC
This problem has existed for weeks and it doesn't make sense as Arelle is a widely used program for use with XBRL and many people have downloaded it.
Disk checks and various error checks are being done frequently by the company's administrator so computer maintenance is always occurring.
Any ideas?
I've had the same issue, I've downloaded installer from another computer and another net, run it on computer where was issue, and it works.
I've been following the documentation on the official RabbitMQ site to install it on my Windows 7 computer. Installing Erlang and setting the environment variables has been trouble-free, but using the RabbitMQ installer has not worked out.
I have tried downloading the installer from both the GitHub and Bintray links as a regular user and administrator, but it does not seem to change the following problem: each time I double-click or right-click->Run as Administrator the installer it removes itself from the computer.
I've tried looking at processes in Task Manager, the Trash Bin, All Programs, and even in Control Panel\Programs\Programs and Features, but there is no sign that the installer has done it's job.
I ended up using Docker and Kitematic to run RabbitMQ image 3.6-management. The image works without any issues and appears to be a preferred option among my co-workers.
I just recently upgraded to Windows 10 and ever since I have upgraded I can't get into VB6. I keep getting the System Registry error. I have googled and tried about everything and nothing seems to work. Running VB6 as Administrator is not an option, don't ask but we can't have admin to our computers we have to be logged in as users. The way we use to fix it was to trick Windows 7 log on as Admin run VB6 as Admin then switch me back to user and it worked, but this no longer works. Does anyone have any suggestions that currently have VB6 working as a user and not admin? I really don't want to resort to have to run it out of my virtual machine :( Thanks in advance!
Amanda,
I know it is 3 years later and I wonder what you did. and my solution may be late.
I moved VB6 Enterprise to a Windows10 machine, I did not upgrade the machine to Win10 with the IDE. However to make it work for some of my clients with Win10 machines I:
Back up all the VB6 files, folder and directories.
Using control panel in Win10, uninstall VB6 app. That's right, uninstall!
Using the original install disk, running it as an Administrator, install the program.
If the program has been updated to a later version, you need to get a copy of the latest version and copy over the one that was installed.
Or, Sweet Talk your IT guy into making you a new install disk with the latest version you are supposed to be running.
Go to the folder where the exe file is installed, Right Click on it and open the Properties, and go to the Compatibility tab.
Choose run as an administrator, and also click the Run this program in compatibility mode for Windows XP Service Pack3, or if it shows Latest version of Windows XP try that. You may need to check with your IT department.
Warning: if the VB6 program uses any non-Microsoft tools you may need to register them by hand.
I suspect this has already been worked out for you, but I put it here for anyone that may stumble across it, needing it.
I built a Lazarus program and it's now in exe form.
I am able to run it on two of my computers running XP and Vista.
However, there are other computers as well running XP, Vista and Win7 but I cannot get it to run at all on them.
There are no errors, nothing... Has anyone else had this issue?
The program is connecting to a postgres DB on my LAN server.
Any idea on fixing this is really valued.
NEW INFO:
Maybe I'm wrong but here's a thought... On the development machine, I initially got an error like **libpq.dll* not found when I first tried to connect to postgres. Then after setting the path, it was fine. I'm thinking now if it cannot find that library and that's why it's not able to run.
If this is the case, should my line Application.OnException:=#CatchErr; catch the error? If not how else should I check if this dll or anything else is missing?
First, a sincere and big THANK YOU to Marco and MArtyn for the great tips and guidelines hat got me thinking of this strange issue.
Here's what happened...
I installed a fresh copy of Windows 7 and XP. As usual it did not work.
Then I suspected the old problem of libpq and then I copied libpq.dll from my working OS and put it in the application folder. By the way this machine has no Lazarus or Postgres. The moment I did this, I got my first error message saying that msvcr100.dll was missing.
And then I copied that as well. So the cycle of copy pasting went on for each and every error until I had finally brought these files to my 'non-working'.
libpq.dll - 9.2.1.12263 - PosgreSQL Access Library
msvcr100.dll - 10.0.40219.1 - Microsoft C Runtime Library
ssleay32.dll - 1.0.1.2 - OpenSSL Shared Library
libeay32.dll - 1.0.1.2 OpenSSL Shared Library
libintl.dll - 0.18.1.0 - LGPLed libintl for Windows NT/2000/XP/Vista/7
Once these files came in, the problem was gone!
Now the program works great :)
Thanks for all your inputs!
I now have to see what the above files have to say about their licenses as I have to distribute the app to other users. But I'm glad at least we figured out the problem.
No, base Lazarus programs don't require special permissions. Of course it could be that a specific functionality in the program requires special permissions (like access to ports below 1024, access to certain paths etc).
Also be aware that EXE's downloaded from what the system considers insecure sources (internet, certain kinds of shares) might be blocked by default. If that is the case, if you take the properties of the .EXE in windows explorer, there will be an "unblock" button.
Anything network related of course requires proper configuration of the firewall. The popups that query you might not always come, in case of doubt configure the firewall manually.