In my VS Professional 2013,I copied and pasted a solution from the source control workspace to my desktop but everytime I open the solution I get these messages:
The mappings for the solution could not be found.
The mappings for the solution could not be found.
The mappings for the solution could not be found.
The mappings for the solution could not be found.
The active solution has been temporarily disconnected from source control because the server is unavailable. To attempt to reconnect to source control, close and then re-open the solution when the server is available. If you want to connect this solution to another server, use the Change Source Control dialog.
How can I completely remove everything related to the TSF from the solution?
I already tried the following suggestions from answers in similar questions:
select the solution in the solution explorer, then go to the File menu. Under the file menu, you'll see a Source Control menu. Under that you'll see Change Source Control.Select this, and in the dialog box that comes up, choose "unbind."
Delete *.vssscc, *.vspscc, files . Open the .sln file with notepad and erase GlobalSection(TeamFoundationVersionControl) ... EndGlobalSection
There is a tool to remove Source Control Bindings from Visual Studio Solutions and Projects from msdn: http://blogs.msdn.com/b/saveenr/archive/2012/08/11/a-tool-to-remove-source-control-bindings-from-visual-studio-solutions-and-projects.aspx
How to use the tool:
•Copy your solution to a new directory (because the tool does modify files)
•Run this command: VSUnbindSourceControl.exe (ex. d:\yourfolder)
Related
How can I add a Visual Studio solution to the TFS? I created a new project named, for example, PROJECTX and I have solution with the name PROJECTX.sln. I select File > Source Control > Add Solution To Source Control, but immediately I get this error:
I also deleted and recreated the same project in TFS and my solution does not have any .vssscc files, therefore I think it wasn't in TFS before, maybe some other copy... but when I deleted the project in TFS, it should not matter, right? I tried the bind/unbind option, but it seems that I'm missing something important. Also I don't have any pending changes and the TFS project is empty on the TFS server.
If I select the Ignore All option, I cant check in the files, because it tells me it is already checked in.
On my case, I had to correct the binding using the Change Source Control dialog box :
Select solution or project that you want to add to source control
Go to "File" -> "Source Control" -> "Advanced" -> "Change source control" (if you look at Microsoft website, you will see that there is not "Advanced" menu in their example, it may be related to VS version or menu settings).
Click "Bind" on each row.
If a row in underlined in red, it may indicate that the current project is not checked in into TFS, check-in all project before you proceed to the binding.
Microsoft - How to : Bind and Unbind Projects and Solutions
Close the solution .
open the solution file in notepad
Then remove the below section.
GlobalSection(TeamFoundationVersionControl) = preSolution
SccNumberOfProjects = 2
SccEnterpriseProvider = {3CF58AB4-18FA-4F8D-95D4-32DDF27D189R}
SccTeamFoundationServer = https://serverIP/Project
SccLocalPath0 = .
SccProjectUniqueName1 = Ecample\\Example.csproj
SccProjectName1 = Example
SccLocalPath1 = Example
EndGlobalSection
then open the solution once again it should prompt to bind, do the binding properly.
I solved this issue by copying the project folder to the new windows folder outside of local tfs workspace.
I had the same. I first created a new folder in TFS, then in File Manager, copy the whole project w/o .sln file to this folder (TFS already created in file system), back in TFS, clicked on "+" icon to add everything underneath this new folder.
Then checked in for the first time.
Continued working on the project made some changes. I thought it's okay to "Add Solution to TFS", still the same problem, even though removing all .vss files/folders.
Since I know TFS already has a copy, so I "Compare" it with my local version see the difference there.
So I just clicked on "Ignore All" button, Bingo, works.
This is how you need to bind the solution to the server
I followed these steps:
If you're already in Visual Studio with the solution opened, close the solution via: File > Close solution.
In Source Control Explorer window, in "Folder" section (left side of the screen), navigate between your TFS projects, find and open the solution you want.
You'll get a message saying:
The solution you are opening is bound to the source control on the
following Team Foundation Server: your_server_folder.
Would you like to contact this server to try to enable source control integration?
Press Yes and if the connection is correct, you'll see now your solution is bind to source control.
I have a 2013 Visual Studio Web Project which was in source control. It has been detached for some time and now I want to move it to a completely new TFS server but when I do it errors and complains expecting certain folders to exist. I think this is due to the TFS bindings.
Now I have seen lots of posts about how to edit the solution file to remove the bindings, plus a few other steps but I'm wondering if there is a menu item which you can click to remove the bindings so I can point at a different TFS server? I am hoping I don't need to edit solution file.
I am not simply being lazy - but I want a defacto way of doing this correctly in one go, not hack here and hack there. Hacking a solution file from someone's advice is not the same as clicking a 'Microsoft' menu item.
Quite easy, you just need to follow my steps and you will get it worked.
Open your solution, for now its under source control with your old
TFS server.
Move to File -> Source Control -> Change Source Control , on the
pop-up window click the unbind, you can unbind all of the
solution or a specific project. Will get a below screenshot.
You can check the solution in solution explorer, there is no lock
icon which means not in source control any more.
However, this isn't over. Since your solution file is still in the
workspace which associate with the old TFS server. So if you want to
add the solution to new source control right now, you will get an
error:
" The item 'ConsoleApplication1.sln' is already under source control
at the selected location xxx"....
You have to copy this solution to a different place out of your
workspace. And change the connection of TFS to the new TFS
server(which you want to add source control with).
Finally, open the solution from local folder(new copied). Right
click the solution in solution explorer select "Add solution to
source control" and choose the location you want add to.
I had my solution in Visual Studio 2012 (which is under TFS source control) open and the TFS server (2010) was down. When I then made a change to one of the files and attempted to save it I got a prompt to ask whether I wanted to Overwrite the file saying the TFS server was down (can't remember the exact words) and the following message appeared in the Output window:
This solution is offline. [Team Foundation Server: http://tfs1:8080/tfs/server]
The solution was offline during its previous session and will remain offline.
How do I get the file change to be recognised as being among Pending Changes and the whole solution back online?
I searched for the solution online and found this solution but wasn't too keen on the registry change.
I found a better way: right-click on the solution name right at the top of the Solution Explorer and select the Go Online option. Clicking this allowed me to select the files that had been changed when I was offline and make the solution online again.
After finding the solution, I found the following msdn forum thread which confirmed the above.
Go to File > Source Control > Go Online, select the files you changed, and finish the process.
Rename the solution's corresponding .SUO file. The SUO file contains the TFS status (online/offline), amongst a host of other goodies.
Do this only if the "right-click on the solution name right at the top of the Solution Explorer and select the Go Online option" fails (because e.g. you installed VS2015 preview).
(Additional step from solution above for if you are missing the AutoReconnect or Offline registry value)
For Visual Studio 2015, Version 14
Turn off all VS instances
HKEY_CURRENT_USER\SOFTWARE\Microsoft\VisualStudio\14.0\TeamFoundation\Instances{YourServerName}\Collections{TheCollectionName} (To get to this directory on Windows, hit the Windows + R key and search for "regedit")
Set both the Offline and AutoReconnect values to 0.
If you are missing one of those attributes (in my case I was missing AutoReconnect), right click and and create a new DWORD(32-bit) value with the desired missing name, AutoReconnect or Offline.
Again, make sure both values are set to zero.
Restart your solution
Additional info:
blog MSDN - When and how does my solution go offline?
I am using Visual Studio 2017 15.4.0 version. Especially when i started use lightweight solution option, this offline thing happened to me. I tried to above solutions which are:
Tried to regedit option but can not see appropriate menu options. Didn't work.
Right click on solution, there is go online option and
when i choose it that gives this error message: "The solution is
offline because its associated Team Foundation Server is offline.
Unable to determine the workspace for this solution."
Then from File -> Source Control -> Advanced -> Change Source Control. I saw my files. I select them and then chose bind option. That worked for me.
You can go use registry editor.
Turn off all VS instances.
Open registry editor and go to:
HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\11.0\TeamFoundation\Instances
Find proper server e.g: team32system1
Go to Collection and nex DefaultCollection:
HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\11.0\TeamFoundation\Instances\team32system1\Collections\DefaultCollection
Set Offline key to 0
Open solution in VS. Afterwards pop up should appear which question would you like bring solution to online mode.
Neither of the above solutions worked for me on Visual Studio Community 2017 v15.7.1. Somehow, there was no "Go Online" option in the context menu. I tried registry edit as suggested here, but that only displayed me error that it could not find the binding. What worked for me is rebinding solution to the server from Change Source Control menu.
Go to File->Source Control->Advanced->Change Source Control and make sure that your solution is binded to your source control. If not (like mine) then click on bind button, it will automatically search online TFS server and rebind your solution to it.
i found another way without much effort.
Just simply right click your solution and then click undo pending changes.
Next, VS will ask you for acutally changed file where you want to undo or not specific file.
In this you can click no for such a file where actual change is happende, rest is just undoing. This will not lost your actual changes
You will need to do two steps here for a complete solution
First click on the Solution that you have open and then go File-> Source Control -> Go Online Then uncheck all the files that are being shown as being modified while you were offline.
Don't do the Get Latest version from Source Control Explorer. That will result in a dialog potentially showing a bunch of files asking you to resolve conflicts. Instead do this
In source Control explorer right click on the folder you want to get latest of and then Advanced - Get Specific Version. In the dropdown for version type choose Latest and then choose the first check box that says Overwrite writable files that are not checked out. This will automatically bring your folder in sync with latest on the server
One method I did with mine, is to "Add to Source Control", and select 'Git'.
How do you remove the bindings from a VS Team project, is it just a matter of deleting ".vspscc" files?
What is the best way to do this, say I have a project on CodePlex and it is time to package it up for release, but by default the bindings come with the source so when others open the solution it interferes with it.
The simple way to unbind from source control:
Open your project
File -> Source Control -> Change Source Control
Select your project(s)
Click "Unbind"
What worked for me (under TFS, not codeplex)
Copy or move the project folder out of your workspace (I put it in c:\temp), and then open it in VS2008.
Visual studio then shows the following prompt:
The solution appears to be under source control, but its binding information cannot be found. Because it is not possible to recover this missing information automatically, the projects whose bindings are missing will be treated as not under source control.
After this, another dialog appears, as follows:
The solution appears to be under source control, but its binding information cannot be found. Because it is not possible to recover this missing information automatically, the projects whose bindings are missing will be treated as not under source control.
And you can chose Temporarily work uncontrolled, or Permanently remove source control association bindings.
Select the latter, do a Save All, and reload the solution. Profit!
I added a project to an existing solution that is currently under source control using TFS, but for some reason I cannot check in the new project. When I view my pending changes, none of the files in the new project show up. None of the files have a plus (for a new file) next to them. What did I do wrong? How do I fix it? It's time to check in.
The problem is the solution has lost its binding. That's why it's not checking out automatically when you add the new project.
In order to restore the binding in VS 2010, go to File->Source Control->Change Source Control. Look for the "Solution: your solution name" and if it's not bound it will say "no server". Click on it and then click "Bind" from the toolbar.
in Visual Studio 2012/2013 it's File->Source Control->Advanced->Change Source Control (Thanks to danglund).
This should create a new vssscc file that is correctly bound. Now add the new project and everything should work correctly.
I was also having the same problem, this is how I fixed it:
Go to Visual Studion: File->Source Control->Change Source Control
Find your project there, its status would be "Invalid", Click on it and press "Unbind". Now go back to Solution Explorer and Remove your project. Add this project again into the solution explorer solve the problem.
Good Luck!
Click on the Team Project name in Source Control Explorer
File -> Source Control -> Add Items to Folder...
Follow the wizard.
Head over to Source Control Explorer and browse to the place in the tree which matches where the new project is at for your solution. Add the files there.
However, I'd be concerned that you modified the solution file and it didn't ask you to check that out. What you may want to try doing is manually checking out the solution file, then readding the project to the solution and seeing if it takes then.
You shouldn't need to drop to the command line - this is a pretty straightforward operation.
Open the solution. Select the project (make sure it is in the solution).
File -> Source Control -> Properties will bring up the binding dialog.
Bind the project to source control.
You should now see + signs next to all your files. The key is that that a .vssscc is added for your project to version control.
If that fails, open your csproj in notepad (after making a backup), and ensure any version control bindings are removed, then try again.
Unfortunately, I'd wager that your best bet is to manually do the check-ins through the command line. I've ran into situations where the Team Explorer UI grows out of sync with what's actually happening in source control, and manually fixing things through tf.exe was the only way to resolve it.
That said, normally, adding a new project to a solution isn't a hassle.
TFS can simply do not know about your project existed. Just add your project files through Source Control Explorer and re-load the solution.
While loading of a solution it can ask you to bind your project to source control. Let it do so by clicking Bind button - it should do all the magic for you.
Make sure you get the latest version of the solution
Check out the solution file
Add the new project
If the newly added project was previously under (another) source control, that might mess things up, make sure to "unbind" it before adding it. (See source control bindings somewhere under the "file" menu in Visual Studio)
You shouldn't need the command line.
I had this same problem in VS 2019, where I had added a new project to an existing solution, and the project wasn't showing up in pending changes. Right-clicking on the project and going to Source Control only had an option to "Add Solution to Source Control".
Using the above answers, I started down the File --> Source Control path, which then yielded an option to directly "Add selected projects to source control". Taking that option solved the problem, so that now the new project shows up in pending changes. NOTE: I'm adding this answer since it's still an issue in VS 2019, but has an easier solution now than in the past.