How can I add a Visual Studio solution to the TFS? I created a new project named, for example, PROJECTX and I have solution with the name PROJECTX.sln. I select File > Source Control > Add Solution To Source Control, but immediately I get this error:
I also deleted and recreated the same project in TFS and my solution does not have any .vssscc files, therefore I think it wasn't in TFS before, maybe some other copy... but when I deleted the project in TFS, it should not matter, right? I tried the bind/unbind option, but it seems that I'm missing something important. Also I don't have any pending changes and the TFS project is empty on the TFS server.
If I select the Ignore All option, I cant check in the files, because it tells me it is already checked in.
On my case, I had to correct the binding using the Change Source Control dialog box :
Select solution or project that you want to add to source control
Go to "File" -> "Source Control" -> "Advanced" -> "Change source control" (if you look at Microsoft website, you will see that there is not "Advanced" menu in their example, it may be related to VS version or menu settings).
Click "Bind" on each row.
If a row in underlined in red, it may indicate that the current project is not checked in into TFS, check-in all project before you proceed to the binding.
Microsoft - How to : Bind and Unbind Projects and Solutions
Close the solution .
open the solution file in notepad
Then remove the below section.
GlobalSection(TeamFoundationVersionControl) = preSolution
SccNumberOfProjects = 2
SccEnterpriseProvider = {3CF58AB4-18FA-4F8D-95D4-32DDF27D189R}
SccTeamFoundationServer = https://serverIP/Project
SccLocalPath0 = .
SccProjectUniqueName1 = Ecample\\Example.csproj
SccProjectName1 = Example
SccLocalPath1 = Example
EndGlobalSection
then open the solution once again it should prompt to bind, do the binding properly.
I solved this issue by copying the project folder to the new windows folder outside of local tfs workspace.
I had the same. I first created a new folder in TFS, then in File Manager, copy the whole project w/o .sln file to this folder (TFS already created in file system), back in TFS, clicked on "+" icon to add everything underneath this new folder.
Then checked in for the first time.
Continued working on the project made some changes. I thought it's okay to "Add Solution to TFS", still the same problem, even though removing all .vss files/folders.
Since I know TFS already has a copy, so I "Compare" it with my local version see the difference there.
So I just clicked on "Ignore All" button, Bingo, works.
This is how you need to bind the solution to the server
I followed these steps:
If you're already in Visual Studio with the solution opened, close the solution via: File > Close solution.
In Source Control Explorer window, in "Folder" section (left side of the screen), navigate between your TFS projects, find and open the solution you want.
You'll get a message saying:
The solution you are opening is bound to the source control on the
following Team Foundation Server: your_server_folder.
Would you like to contact this server to try to enable source control integration?
Press Yes and if the connection is correct, you'll see now your solution is bind to source control.
Related
I have a 2013 Visual Studio Web Project which was in source control. It has been detached for some time and now I want to move it to a completely new TFS server but when I do it errors and complains expecting certain folders to exist. I think this is due to the TFS bindings.
Now I have seen lots of posts about how to edit the solution file to remove the bindings, plus a few other steps but I'm wondering if there is a menu item which you can click to remove the bindings so I can point at a different TFS server? I am hoping I don't need to edit solution file.
I am not simply being lazy - but I want a defacto way of doing this correctly in one go, not hack here and hack there. Hacking a solution file from someone's advice is not the same as clicking a 'Microsoft' menu item.
Quite easy, you just need to follow my steps and you will get it worked.
Open your solution, for now its under source control with your old
TFS server.
Move to File -> Source Control -> Change Source Control , on the
pop-up window click the unbind, you can unbind all of the
solution or a specific project. Will get a below screenshot.
You can check the solution in solution explorer, there is no lock
icon which means not in source control any more.
However, this isn't over. Since your solution file is still in the
workspace which associate with the old TFS server. So if you want to
add the solution to new source control right now, you will get an
error:
" The item 'ConsoleApplication1.sln' is already under source control
at the selected location xxx"....
You have to copy this solution to a different place out of your
workspace. And change the connection of TFS to the new TFS
server(which you want to add source control with).
Finally, open the solution from local folder(new copied). Right
click the solution in solution explorer select "Add solution to
source control" and choose the location you want add to.
As per the tags, I'm using VS2013 and TFS2013.
There are multiple projects in the solution: Model, Presenter, View, etc. All other projects are working as expected in terms of source control operations.
Problems with the Model project:
Adding a new file via Solution Explorer isn't automatically detected as a pending change
Deleting a file isn't detected either
Other source control operations work fine for the Model project, such as:
Get latest version
Edit detection for existing files (including changes to the csproj
file when a new file is added)
Checking in pending changes
The csproj file would show up in pending changes with the newly added file listed in it, but the new file itself isn't showing up, therefore causing build errors on other developers' machines if only the csproj changes are checked in.
The workaround is to find the added file in solution explorer and Add via context menu, this will make it appear as a pending change. But this process should be automatic as per the other projects.
Noticed that there is no .vspscc file for the Model project while other projects have one each.
Any help appreciated. Thanks.
I would unbind and rebind the problem project and try again:
To unbind a solution or project from source control
In Visual Studio, open Solution Explorer and select a solution or
project to unbind.
On the File menu, click Source Control, then Change Source Control.
In the Change Source Control dialog box, click Unbind.
To bind a solution or project to source control
In Visual Studio, open Solution Explorer and select a solution or project to bind.
On the File menu, click Source Control, then Change Source Control.
In the Change Source Control dialog box, click Bind.
Select the database and location to which to bind, and click OK.
Click OK.
You might need to go to Advanced to find the Change Source Control option
https://msdn.microsoft.com/en-us/library/0eh3790h%28v=vs.90%29.aspx
Before unbinding and binding your solution try his:
Go to Source Control Explorer
Click the "Add Items to Folder" (the
one on the left of the red cross)
Select the items you want to Add and follow the instructions on screen
That's all
Click <Detected: x add(s), x delete(s)> : in the source control explorer then select the file to add
For years I've been relying on 'Detected Adds' to add missing files - which was never a sustainable solution but I've just about managed with it.
But now if broke.
I'm actually about to reinstall Windows but in the meantime one of the best ways I've found to get a sense on what's missing (and it's still working even though the detected adds isn't) is the recursive 'Compare' window.
You can add files from here too.
It's a little klunky but it gives me a good sense of security and shows file diffs if you want to see what may have changes.
In my VS Professional 2013,I copied and pasted a solution from the source control workspace to my desktop but everytime I open the solution I get these messages:
The mappings for the solution could not be found.
The mappings for the solution could not be found.
The mappings for the solution could not be found.
The mappings for the solution could not be found.
The active solution has been temporarily disconnected from source control because the server is unavailable. To attempt to reconnect to source control, close and then re-open the solution when the server is available. If you want to connect this solution to another server, use the Change Source Control dialog.
How can I completely remove everything related to the TSF from the solution?
I already tried the following suggestions from answers in similar questions:
select the solution in the solution explorer, then go to the File menu. Under the file menu, you'll see a Source Control menu. Under that you'll see Change Source Control.Select this, and in the dialog box that comes up, choose "unbind."
Delete *.vssscc, *.vspscc, files . Open the .sln file with notepad and erase GlobalSection(TeamFoundationVersionControl) ... EndGlobalSection
There is a tool to remove Source Control Bindings from Visual Studio Solutions and Projects from msdn: http://blogs.msdn.com/b/saveenr/archive/2012/08/11/a-tool-to-remove-source-control-bindings-from-visual-studio-solutions-and-projects.aspx
How to use the tool:
•Copy your solution to a new directory (because the tool does modify files)
•Run this command: VSUnbindSourceControl.exe (ex. d:\yourfolder)
I moved some code from my c drive to my d drive. When I opened the solution, it told me that:
The solution appears to be under source control, but its binding
information cannot be found. Because it is not possible to recover
this missing information automatically, the projects whose bindings
are missing will be treated as not under source control.
So I tried permanently removing the bindings and downloaded the latest version. Now my changes don't register as pending changes.
I've tried selecting the solution in the Solution Explorer and File => Source Control => Change Source control, but it does not let me bind. Server Name and Server Binding columns have "".
Generally speaking, the location of code on your machine is dependent upon where your workspace is located.
If you move your workspace to the D: drive, then there shouldn't be an issue.
However, if you simply used Explorer to copy the files to the new location, then VS isn't going to be able to maintain the bindings.
From the Workspace Editor you can map the entire tree, solutions or even individual projects to a new location.
First off, put it back and undo the changes.
Then, Go to File | Source Control | Workspaces.
Click on the work space name and then the "Edit..." button.
In the working folders area select the source control folder you want to move and give it a new local folder location.
You will need to edit your Workspaces for TFS Server to know the change that has happened at your local machine. To edit your workspace, in Visual Studio:
ensure you have no pending changes; also copy your source code folder to some location temporarily, just to be safe (you can remove after you are all set)
go to Source Control Explorer
locate the "Workspace:" dropdown
select the item "Workspaces" from the dropdown list (you will get a dialog titled "Manage Workspaces"
if you have multiple Workspaces, select the appropriate one from the list in the dialog
click on "Edit" button (you will get an "Edit Workspace..." dialog)
down below in the dialog, you will see "Working folders" grid
click on appropriate row from the grid and modify the "Local folder" path to set to your new folder location
Sometimes TFS and Visual Studio have issues in getting these workspace changes synchronized. I would always close Visual Studio and re-launch it to get my changes synchronized anytime after I make Workspace related changes.
Hope this helps.
the most crude way here (I don't know if there is any other way)
is to put the folder back to its old location , Check in your changes
then remap the project to the new folder
When you move files/folders to make the moves pending changes you need to use a TFS client to do the moves.
For one or two files the Team Explorer UI is OK, for more the command line is easiest.
See tf.exe rename on MSDN (tf move is an alias for rename). There is also step by step help on using the GUI: Move, Rename, and Delete Version-Controlled Files and Folders.
I added a project to an existing solution that is currently under source control using TFS, but for some reason I cannot check in the new project. When I view my pending changes, none of the files in the new project show up. None of the files have a plus (for a new file) next to them. What did I do wrong? How do I fix it? It's time to check in.
The problem is the solution has lost its binding. That's why it's not checking out automatically when you add the new project.
In order to restore the binding in VS 2010, go to File->Source Control->Change Source Control. Look for the "Solution: your solution name" and if it's not bound it will say "no server". Click on it and then click "Bind" from the toolbar.
in Visual Studio 2012/2013 it's File->Source Control->Advanced->Change Source Control (Thanks to danglund).
This should create a new vssscc file that is correctly bound. Now add the new project and everything should work correctly.
I was also having the same problem, this is how I fixed it:
Go to Visual Studion: File->Source Control->Change Source Control
Find your project there, its status would be "Invalid", Click on it and press "Unbind". Now go back to Solution Explorer and Remove your project. Add this project again into the solution explorer solve the problem.
Good Luck!
Click on the Team Project name in Source Control Explorer
File -> Source Control -> Add Items to Folder...
Follow the wizard.
Head over to Source Control Explorer and browse to the place in the tree which matches where the new project is at for your solution. Add the files there.
However, I'd be concerned that you modified the solution file and it didn't ask you to check that out. What you may want to try doing is manually checking out the solution file, then readding the project to the solution and seeing if it takes then.
You shouldn't need to drop to the command line - this is a pretty straightforward operation.
Open the solution. Select the project (make sure it is in the solution).
File -> Source Control -> Properties will bring up the binding dialog.
Bind the project to source control.
You should now see + signs next to all your files. The key is that that a .vssscc is added for your project to version control.
If that fails, open your csproj in notepad (after making a backup), and ensure any version control bindings are removed, then try again.
Unfortunately, I'd wager that your best bet is to manually do the check-ins through the command line. I've ran into situations where the Team Explorer UI grows out of sync with what's actually happening in source control, and manually fixing things through tf.exe was the only way to resolve it.
That said, normally, adding a new project to a solution isn't a hassle.
TFS can simply do not know about your project existed. Just add your project files through Source Control Explorer and re-load the solution.
While loading of a solution it can ask you to bind your project to source control. Let it do so by clicking Bind button - it should do all the magic for you.
Make sure you get the latest version of the solution
Check out the solution file
Add the new project
If the newly added project was previously under (another) source control, that might mess things up, make sure to "unbind" it before adding it. (See source control bindings somewhere under the "file" menu in Visual Studio)
You shouldn't need the command line.
I had this same problem in VS 2019, where I had added a new project to an existing solution, and the project wasn't showing up in pending changes. Right-clicking on the project and going to Source Control only had an option to "Add Solution to Source Control".
Using the above answers, I started down the File --> Source Control path, which then yielded an option to directly "Add selected projects to source control". Taking that option solved the problem, so that now the new project shows up in pending changes. NOTE: I'm adding this answer since it's still an issue in VS 2019, but has an easier solution now than in the past.