Where is the Visual Studio solution for FreeGLUT 3.0.0? I know the 2.8.1 has one, but 3.0.0 does not. I would really like to use the latest version.
Use the included CMakeLists.txt to create a Visual Studio solution:
How to build freeglut with CMake on Windows (MS Visual Studio)
Download CMake (http://www.cmake.org/cmake/resources/software.html).
Get one of the releases from the binary distribution section.
Run the CMake installer, install wherever you like.
Launch CMake via Start > Program Files > CMake 2.8 > CMake (GUI)
(note that the shortcut put by the installer on your desktop does NOT
point to the CMake GUI program!)
In the "Where is the source code" box, type or browse to the root
directory of your freeglut source (so that's /freeglut, not
/freeglut/src).
In the "Where to build the binaries" box, type or browse to any
folder you like - this will be where the Visual Studio solution will be
generated. This folder does not have to exist yet.
Hit the Configure button near the bottom of the window.
Pick your target compiler, make sure that its installed on your
system of course!
Answer Ok when asked if you want to create the build directory.
Wait for the configure process to finish.
The screen will now have some configuration options on it, for
instance specifying whether you want to build static and/or shared
libraries (see below for a complete list). When you've selected your
options, click the Configure button again.
The Generate button at the bottom will now be enabled. Click Generate.
The build files will now be generated in the location you picked.
You can now navigate to the build directory you specified in step 5.
Open the freeglut.sln file that was generated in your build directory,
and compile as usual
Related
I'm trying to run a cmake project (openmvg, for now) in Visual Studio 2017.
I believe I've installed it correctly following the instructions.
Now, when I try to run it (Release / Win32), I get the following error message:
"Unable to start program "D:\openMVG\build\Release\ALL_BUILD"
I've checked the CMakePredefinedTargets, but I can't find a project target except ALL_BUILD, INSTALL, and `ZERO_CHECK.
Can anyone help with this problem? I'll appreciate any answer to it. Thanks.
By default a newly generated MSVC project will always set "ALL_BUILD" as its Startup Project. To run the project you need you have to set it manually by clicking (right button) on the project and choosing "Set as StartUp Project".
CMake predefined targets are there for, well, predefined CMake targets. Those exist for rebuilding, test running, installing etc. Usually they aren't candidates to be startup projects but some of your projects are.
I'm struggling with the step from the official documentation
Extract it into a nice and short named directory like D:/OpenCV/dep/qt/ . Then you need to build it. Start up a Visual Studio Command Prompt (2010) by using the start menu search (or navigate through the start menu All Programs ‣ Microsoft Visual Studio 2010 ‣ Visual Studio Tools ‣ Visual Studio Command Prompt (2010)).
The Visual Studio command prompt
Now navigate to the extracted folder and enter inside it by using this console window. You should have a folder containing files like Install, Make and so on. Use the dir command to list files inside your current directory. Once arrived at this directory enter the following command:
configure.exe -release -no-webkit -no-phonon -no-phonon-backend -no-script -no-scripttools
-no-qt3support -no-multimedia -no-ltcg
...
My issue is that in this document Qt 4.7.3 was used, now, I dont know about that version because I wasn't able to find it but in the newer one there is not Install, Make files...
which ones should I use instead?
does anyone has any step for more recent version of Qt and VS that I can follow to get this done
I turns out I wasn't using the source file, which you can find here found the folder which contains the configuration and INTALLS files on the new version in a folder called qtbase continued with the steps from there on the OPENCV guide and everything worked alright on MSVS2012
I am trying to statically build Assimp on Windows to later make a standalone executable. Here is what I did:
I downloaded the 3.1.1 version and used Cmake GUI.
I unchecked BUILD_SHARED_LIBS and checked ASSIMP_BUILD_STATIC_LIB
Clicked on configure and Generate
Opened the solution with Visual Studio 2013 in administrator mode
Right cliked on ALL_BUILD and build
At this point everything worked fine. Then I tried to build INSTALL (right click > build) and it failed with:
file INSTALL cannot find
"C:/Users/.../assimp-3.1.1/build/code/Debug/assimpd.pdb"
I have two questions:
Should I actually build INSTALL as I only want a static build?
If yes, what did I do wrong/what should I do to fix this?
Thank you very much for your time!
PS: I checked the directory Debug and there is only a assimpd.lib
I am open to either a Visual Studio answer or a MinGW answer. I just finished building LLVM 3.2 using CMake and Visual Studio 2010. Everything went smoothly, but I have no llvm-config. Do I need it? Every example I see on the intertubes makes use of that tool. If I don't need it, how do I configure my project to make use of LLVM?
To be clear, I am not trying to use LLVM tools/compilers (like clang and whatnot). I am trying to write C++ code that uses the LLVM libraries to produce LLVM IR and even compile that stuff. I setup my include and lib folders. I ran llvm-config in Linux and saw a long list of macros and libraries.
I have a wonderful folder full of goodies. It just has no llvm-config in there: C:\Program Files (x86)\LLVM\
llvm-config does not exist in windows prebuilt binaries. You need to compile from the source code to get it.
Grab CMAKE > 3.5 , install it and make sure you add it to PATH.
Download Visual Studio 2019
Donwload the source code (9.0.1 is the latest as I'm writing this)
Extract the source code
Cd into the root of the llvm source-code
In cmd, type cmake . this will generate Visual Studio 2019 sln.
open sln file(LLVM.sln), change the build type to Rlease, build the whole project
navigate to your Rlease\bin, and there you have your llvm-config.exe
If you have built the LLVM in debug version all the executables (including llvm-config) have been placed in your build directory (containing Visual Studio project and solution files) in bin/Debug/ subdirectory. In case of release build replace Debug with Release.
If you are interested in using LLVM on Windows more than building it, check out Windows snapshot builds.
I want to learn how to use QtWebKit by creating a simple project, but I can't even install it. I found some tutorials like this, but it's for the standard Qt package. I am using for another project the Visual Studio Qt Add-in, so I don't want to uninstall it.
I found some WebKit source code in Qt-VS, but I don't know what to do with it. It does not contain any Perl script so the tutorial above is not good for it, but it does contain some makefiles. Or should I download the QtWebKit package separately, and follow the tutorial above? Will it generate compatible libraries? (I could not find any Qt command prompt, and the tutorial says the VS command prompt must be compatible. How do I know it?) Also, where should I move the binaries generated, so the project made with the built-in Qt template in Visual Studio to be able to find these new files?
Sorry for these lame questions, but I get lost really fast when it comes to building stuff from source and not given in binary form.
I would appreciate any feedback or link to stuff
EDIT:
The only thing I could pull of is to install another copy of Qt, the normal one, and use it for the WebKit project changing the Qt environment variable value each time I'm switching the project, but that would be the lamest thing ever.
Download the Qt 4.7.3 source code:
http://get.qt.nokia.com/qt/source/qt-everywhere-opensource-src-4.7.3.zip
Unzip and copy to a convenient location.
Open a Visual Studio 2010 command prompt.
You may need to run the command prompt as administrator. To do this, go to Start Menu > All Programs > Microsoft Visual Studio 2010 > Visual Studio Tools, right-click on Visual Studio Command Prompt (2010) and select Run as administrator.
To make a 64-bit build, select Visual Studio x64 Win64 Command Prompt (2010) instead.
Change the working directory to the Qt top folder.
Run the commands:
configure.exe -platform win32-msvc2010
nmake
Wait an hour.
This will build Qt, with all components, including QtWebKit.
Does this answer your question?
user763305's steps will work with these additions:
You need to install Perl. I used "ActiveState Perl"
You need to install WinFlex and WinBison. For some reason the QT script refers to the flex as "win_flex" but tries to find an executable called "bison.exe." I renamed "win_bison" to "bison.exe" and it worked.
I was also able to configure it successfully and build for msvc2012
configure.exe -platform win32-msvc2012
nmake
And it didn't take a few hours on my machine. Just about 55 minutes.