What I said is like this in C#
It's very annoying when I need to manually add all open for the type I use in F# source code.Especially When I am not very familiar with the reference I work with.
If I forget the namespace,I open the object browser ,type the class name I am using, wait 1 or 2 second let VS finish freezing and get the namespace I want.
All I want is something like open namespace tip.I have searched it for more than half hour and I can not even find anyone asked the similar question.
Or It's all my fault and I should remember all the namespace the type I am using when I am coding???
Use Visual F# Power Tools, which can be installed on Visual Studio via Extensions and Updates.
List of current features:
Auto-generating XmlDoc
Formatting document / Formatting selection
Navigation bar
Highlight references
Rename refactoring
Depth colorizer
NavigateTo
Syntax coloring
Folder organization
Find all references
Implement interface
Record stub generation
Union pattern match case generation
Resolve unopened namespaces
Gray out unused declarations
Gray out unused open declarations
Go to metadata
Task List comments
Generate references for F# Interactive
Navigate to source
Quick info panel
FsLinter integration
More details in the link above, and on the GitHub repo.
Related
I'm using Visual Studio 2017 Enterprise, Version 15.3.3
I looks like IntelliSense has some new features for code completion. On of this feature is, that a field name is automatically suggested when a type is written.
SpacePosition s.. // starting with s, Intellisense suggest "space", "position" and "spacePosition"
I like this feature in general but not for code snippets. Using a code snipped I have the problem, that the name of a literal is automatically replaced by IntelliSense after pressing tab (which is used for navigate to the next literal).
In my example I want to name the property "other" and then jump the the next literal inside the snippet. But because of IntelliSense, the property name is replaced by "spacePosition".
Is there any way to disable the IntelliSense feature inside code snippets?
I found a solution for the same problem in Visual Studio Code:
stackoverflow article but not for Visual Studio
Disable the name suggestions in Tools/Options/TextEditor/C#/IntelliSense. That's what is causing this nonsense. Seems MS realized later that they flipped coders up by adding that feature that changes old behaviour greatly without giving them a way to disable it. Now there is such a checkbox.
I nearly uninstalled this studio because of this lol. Not sure, may be it's a good feature, but i'm too used to Tab code snippets around, that I'm better without it.
How to: Manage Code Snippets
To access the Code Snippets Manager
1.) On the Tools menu, click Code Snippets Manager. Shortcut Ctrl+K,Ctrl+B
How to: Change snippet behavior
To change snippet behavior.
1.) Go to Tools > Options > Text Editor > IntelliSense > Snippet Behavior
2.) See images.
Now there has no such option to disable this intellisense feature inside code snippets, but you can try to click 'Esc' key after type 'other', then click 'Tab' key to jump to next literal, please check the following:
This actually works correctly in Visual Studio 2019 for classes if it is a class that is valid for the current context (i.e. Doesn't exist in a namespace not in the current class namespace or in the using statements for the file).
Here is my example snippet
Snippet Definition
Snippet Use
And here is an example where I use two different classes as the second snippet, one that is a valid class name and works to use tab to autocomplete, and one doesn't work because the class requires adding an additional namespace using statement that is currently missing from the file:
So I see two options.
Use the sucky to cancel any auto-complete logic.
Ensure you have the proper using statements. You can even add using statements to your snippet using the imports declaration:
Is there a way to quickly "Auto qualify" a variable type declaration in Visual Studio 2013?
E.g. if I type:
Dim SomeExcel as New Application
is there a way to get the IDE to automatically fill in the namespace? like this:
Dim SomeExcel as New Microsoft.Office.Interop.Excel.Application
The IDE seems to be able to infer the namespace readily enough; if I hover over the type name it can tell me what namespace(s) contain the type.
It would be really useful to me to be able to change an old project from "short names" like Application to fully qualified names like Microsoft.Office.Interop.Excel.Application without having to find each one and type out the whole namespace.
Or, in the event of an ambiguous name, if it would give me the option to pick which namespace and it would fill it in. Similar to how if you use an undefined class it will warn you and give you the options to either automatically add the Imports statement or even create a class stub for you.
Since it will do all that for you automatically, and it will make suggestions and autocomplete methods/properties for an interface instance as you type, I would be surprised if there was not a quick way to have it convert "short names" to fully qualified names, but if there is - I can't seem to find it! I looked through the menu commands, and various right-click menus, and I looked on MSDN but couldn't find anything - but i'm not sure I'm using the right search terms.
Hoping someone with more experience might know how to do this or if this functionality doesn't exist.
No, nothing exists in Visual Studio to do that.
Doing so also confers no special advantages, as VS will tell you if you have an ambiguous reference automatically and give you the possibilities to resolve it.
When that happens, just click the icon that appears when you hover over it and select the correct namespace. VS will then qualify it with that namespace.
Here's an image of the icon:
And the resulting menu:
Granted, that is for C#, but VB usually works the same way.
I was wondering if there is a plugin that allows me to jump directly to the test for the current class (Or create it if it doesn't exist).
I guess this should be based on the convention that the test project is named like the project being tested + "test" and the test class is named like the class being tester + "test".
A feature like that would really help in projects with many files and foldes, where scrolling the solution explorer to find the associated test project can be quite annoying.
how about NCrunch? This tool will show you, per method, which and how many tests are covering it:
I did manage to find a few extensions on visualstudiogallery.com, but ended up writing my own plugin for this. Its not perfect, but i does what I needed.
If anyone else would like, its available for free at testlocator.eqa.dk
In Visual Studio you can Shift+F12 on any class or method definition to find all references. Although the resulting list Studio is not very convenient, but a starting point. Using a tool like DevExpress CodeRush or ReSharper lets you sort and filter by namespace, project, file, etc.
If you happen to use ReSharper, it has a TestLinker plugin.
It does the job pretty well.
Basic shortcut: Ctrl+Alt+F7.
Goto Related Files is extended with navigation points to production/test classes.
New shortcuts ReSharper_GotoAllLinkedTypes and ReSharper_GotoLinkedTypesWithDerivedName (assignable via keyboard options) that jumps between linked types. In case of multiple linked types, a dedicated popup menu is shown, which can also be displayed in Find Results window.
Oftentimes I want to bring up a system class in a source view, so that I can browse the properties and methods exposed by the class. Below is the screenshot of what I mean:
Srting from metadata http://img443.imageshack.us/img443/940/stringfrommetadata.png
Usually I do this by selecting the class name and pressing F12 (or right click>Go To Definition). However, if I haven't got it anywhere ready, i have type it up and then do Go To Definition. Most of the time I have to delete what I typed later on.
Is there a way to bring up this view without having to type the class name? The VS2010 Navigate To dialog doesn't support this.
EDIT: When I posted the question I didn't use any Visual Studio plugins. Now that I realised that I have full CodeRush license (thanks to StackOverflow promotion for users with 10K rep) I will accept answers that use CodeRush or Refactor!.
EDIT: At this stage I haven't really got anywhere with trying to answer this question. I am going to leave it open and let the bounty auto-award itself to Rory as he explained what's happening the best. In the meantime(schedule allowing) I will investigate doing this with DXCore as I think it should be possible.
The view you're looking at appears to have been built by some sort of analysis of the IL of the framework. Without knowing the type you intend to look at, no deconstruction can be done. Therefore I feel that, you are unlikely to find exactly what you have said you are looking for.
Allow me to suggest a few alternatives though.
Disclaimer: I work for DevExpress as a CodeRush Community Evangelist.
The Object Browser (Ctrl+Alt+J) This screen will load without attempting to show you any particular type, it will therefore be down to you to find the type in question. However all types are available and full search functionality is provided. once the type you're looking or is found, all members are listed and available.
Update: If you use the (Ctrl+K, Ctrl+R) shortcut to launch the object browser, then it will launch focused on the Search box. This is invaluable.
There are a number of CodeRush features which can prove useful when trying to locate code.
TabToNextReference (Tab) Whilst the caret is positioned within a type, strike the tab key and the next reference to that type will be located. More Details
References ToolWindow (Shift+F12) When activated the References ToolWindow will show you any references to the current type or member. This toolwindow can also be used to navigate said references. The References Toolwindow can be used in both on demand and Live mode. this allows you to have the window update as you navigate your code (via mouse or keyboard) and locate all references of any symbol the caret lands upon.
QuickNav (Ctrl+Shift+Q): This feature is closest in style to VS2010's NavigateTo feature. QuickNav will locate symbols matching whatever you type into it's filter box. This facility also supports Camel Case search. More details
QuickNav is also much more configurable than it's VS counterpart
Finally
Please also keep in mind that CodeRush is build upon the DXCore, a framework which allows users to create their own plugins for use alongside each other and CodeRush.
This framework has been repeatedly been leveraged by the community to add additional functionality. So even if you don't see any thing quite to your needs, consider suggesting something to the community by way of the forums or even contact me directly RoryB at DevExpress dot Com
I'm sure there's something we can do to help you out :)
I was not aware of that new "Navigate To" feature, but I used to use Reflector for this sort of things. The pro version offers some integration with Visual Studio (Right clicking the method and selecting "Open In .NET Reflector"). It will open the reflector window and won't show the code in the VS itself. You can watch the demo that shows this feature and some others.
This is not the best answer that I'd expect but is a good option to know.
There is no way that I know of to do this in Visual Studio 2010. However, you can do this in ReSharper via the 'navigate to' menu. I suggest you try the 30 day trial from them, then if you really do need this then purchase it.
A number of add-ins allow you to browse objects (though usually in an object-browser treeview manner rather than in a "header" file form - I believe Resharper, CodeRush and Visual Assist X all have variations on this theme).
However, one add-in to consider (as it's free) is the VS Productivity Power Tools. It adds a Solution Navigator window that gives a view onto your solution just like Solution Explorer, but (among other enhancements):
can search & filter the files listed, e.g. show only those files that are named Test.
can "expand" any file entry to show the types and members within it.
Is there any sort of plug-in or tool available for Visual Studio 2008 to alphabetize methods? Ideally I'd like a tool that will alphabetize a selection, or specified type (i.e. only methods, not member variables), either automatically or on-demand.
While Resharper has many cool features it has a large impact in CPU and I/O usage and can be very complicated to use. It is also only available under commercial licensing unless you qualify for a few very specific free use licenses.
Try CodeMaid. It is free for commercial use and has a much lower performance overhead. I find it easy to use and it is very good for alphabetizing methods.
To sort your file, open the file via solution explorer:
Right click the open file
Code Maid menu (likely near the top of the right click menu)
Click Reorganize Active Document
Alternatively, using the default CodeMaid hotkeys CTRL+M,Z to sort your active file.
Resharper has a Type Members Layout, which can order members by type, accessibility and alphabetically as well.
You can also take a look into Ora , which presents a pane in visual studio that is ordered (even though your source may not be). Link's dead.
The following answer goes much further than the OP asks, because I believe, that sorting methods just by name is far not enough for most programmers. Mostly you want your methods, constructors, fields, event handlers, and interface implementations to be seperated from each other (i.e. through regions), and sorted by various criteria.
For this purpose I tried NArrange, Regionerate, and others, but I've found them not intuitive to use. So ReSharper became the tool of my choice.
As already mentioned by #DavidN, ReSharper can sort your class members (fields, constructors, methods, delegates) by name, accessibility, type, readonly, etc... You can also surround specific members with regions. What I like the most is the ability to group interface members (e.g., #region IDisposable with void Dispose() method in it) and methods that handle an event.
ReSharper provides both - an easy way to configure and trigger the sorting of class members.
Configuring the layout
Create a XML file within Visual Studio and copy-paste the default type member layout (ReSharper Options > Languages > C# > Type Members Layout) into that file. Download the latest XSD schema. Add the schema file to Visual Studio's schema files (Menu > XML > Schemas... > Add). You should be able now, to edit the XML file with IntelliSense support.
Triggering the reorder
If you use the Visual Studio keyboard scheme (ReSharper Options > Visual Studio Integration) and press Ctrl+E,F for Silent Code Cleanup. A dialog will pop up, where you can select a Code Cleanup setting. For this setting you should check Reorder type members. The second time you press the shortcut, ReSharper will automatically reorder your class members.
1: ReSharper Type Members XSD Schema
For C# you can use Regionerate to organize your code. You can create a template that simply organizes your code but doesn't use regions.
You can create such a function yourself using Devexpress' free DXCore product (the same extensibility framework used to create CodeRush).